CS Paper Radar

Hidden Markov Model-Based Remaining Useful Life Estimation of Rolling Bearings Using Vibration Signals: A feasibility study

Ioannis Ksoulos, Dimitrios M. Bourdalos, John S. Sakellariou, Sonia Malefaki

eess.SP ·submitted 2026-09-23 07:43 UTC · v1
top venue

Abstract

This feasibility study presents a Hidden Markov Model (HMM)-based methodology for the Remaining Useful Life (RUL) estimation of rolling element bearings when the training vibration signals differ significantly from those of the target bearing. An AutoRegressive (AR) model is first employed to capture the machinery dynamics using vibration acceleration measurements from an initial operating period where all components including the considered bearing are still under healthy condition. The AR model is subsequently used to filter a newly acquired vibration signal from the faulty machinery, and typical Envelope Analysis is performed on the residual signal to identify fault-related repetition frequencies. The amplitudes of these frequencies, combined with statistical features of the AR residuals are fused through Principal Component Analysis to construct a sensitive to bearing degradation Condition Indicator (CI). Based on training data from the healthy state, a threshold is established, and a fault is declared when the CI exceeds this threshold. Once a fault is detected, its progression is modelled as a sequence of consecutive, distinct states, which are identified using K-Means clustering. A left-right HMM with continuous observation densities is estimated to represent the fault progression and thus predict the RUL. The HMM-based RUL estimation methodology is trained using vibration measurements from a limited number of two run-to-failure experiments with two nominally identical bearings, while RUL estimation performance is assessed on a third bearing of the same type. Despite the significant differences between the vibration data used for training and the life cycles of the training bearings with respect to the target bearing, the RUL estimation results indicate an adequate but conservative performance of the postulated HMM-based methodology.

Comment
14 pages, 10 figures. Accepted for publication in the Proceedings of the 10th International Conference on Risk Analysis (ICRA10), Patras, Greece, 2025

Closest papers

Nearest neighbours by meaning across the whole index.

A Harmonic-Regression ARMA model for rotating machinery dynamics identification and fault detection under varying conditions

eess.SP ·2026-09-23 ·Dimitrios M. Bourdalos, John S. Sakellariou, Spilios D. Fassois
published similarity 0.63
Abstract · Accepted for publication in the Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2026), Leuven, Belgium,…

Fault detection in rotating machinery under varying operating conditions remains a challenging problem. Existing approaches are mainly based either on non-parametric vibration signal representations, parametric deep learning models, or on parametric ARMA-type models. While deep learning approaches often lack transparency and require large training datasets, ARMA-type models rely on the assumption of a purely rational spectrum, which can be restrictive for rotating machinery vibration signals exhibiting mixed spectral characteristics. To address these limitations, a novel Harmonic Regression ARMA (HR-ARMA) model is presented for rotating machinery dynamics identification, which combines an explicit harmonic regression part for representing the dominant deterministic cyclical components with an ARMA part for the remaining broadband stochastic dynamics. Based on this model and within a Multiple Model framework, fault detection is achieved under varying operating conditions. The HR-ARMA modelling performance is validated through simulation and experimental studies on a single-stage gearbox, demonstrating accurate representation of both cyclical and broadband dynamics, improved parsimony and significantly higher fault detection performance compared with conventional ARMA models, achieving at least 98% True Positive Rate at 5% False Positive Rate in the experimental study.

0.39

Lightweight Time-Frequency Vibration Sensing for Consumer Device Condition Monitoring

eess.SP cs.LG ·2026-10-09 ·Po-Heng Chou, Jen-Yu Chiu, Chun-Yu Yeh, Wei-Lung Mao, Walid Saad
benchmark similarity 0.53
Abstract · 6 pages, 3 figures, and 4 tables. Submitted to the 2027 IEEE International Conference on Consumer Electronics (ICCE 2027)

Consumer rotating devices, including washing machines, air conditioners, electric fans, robotic vacuum cleaners, and home fitness equipment, increasingly rely on vibration sensing for intelligent condition monitoring and predictive maintenance. Ensuring reliable operation in these resource-constrained appliances requires efficient, lightweight artificial intelligence (AI) solutions capable of processing non-stationary signals under real-world operational interference. This paper proposes a lightweight AI-assisted vibration sensing framework that employs continuous wavelet transform (CWT) and Hilbert-Huang transform (HHT) to convert one-dimensional (1-D) vibration time-series signals into two-dimensional (2-D) time-frequency representations. These representations are subsequently analyzed using lightweight deep learning architectures, specifically MobileNetV3-Small, ConvNeXt-Tiny, and the You Only Look Once version 11 classification model (YOLOv11-cls). Public bearing benchmark datasets, including Case Western Reserve University (CWRU), Paderborn University (PU), and Intelligent Maintenance Systems (IMS), are utilized as representative rotating components to investigate model generalization. The proposed framework is designed with eventual embedded deployment in consumer electronics in mind. Experimental results demonstrate that CWT combined with YOLOv11-cls achieves high diagnostic accuracy, while MobileNetV3-Small provides an attractive low-latency alternative for computationally constrained edge platforms. Conventional random splitting is also compared with dataset-specific structured isolation. The results highlight the importance of avoiding data leakage and quantify tradeoffs in classification accuracy, parameter count, floating-point operations (FLOPs), model footprint, preprocessing cost, and central processing unit (CPU) inference latency.

0.23

When Labels Are Scarce: An Oscillatory State Space Model for Vibration Diagnosis

cs.LG eess.SP ·2026-09-23 ·Mainak Mallick, Seung-Kyum Choi
benchmark similarity 0.52
Abstract

Machine fault diagnosis from vibration requires learning from scarce labelled fault recordings while meeting the computational constraints of edge devices for local inference. We introduce DualRes, a compact oscillatory state-space model that combines two complementary spectral views of vibration, capturing rapid changes and fine frequency structure. Time-aligned views are processed by selective oscillatory memory, which learns how long to retain temporal patterns. The encoder contains 39,528 parameters. We evaluate supervised learning across six bearing datasets and a gearbox benchmark, with an additional gearbox pilot. Recording-level splits and explicit accounting of labelled duration distinguish data efficiency from repeated exposure to correlated samples. On the main gearbox benchmark, DualRes achieves state-of-the-art performance among the nine evaluated methods at six of seven label budgets. With about six labelled seconds per class, it improves macro-F1 by 16.1 percentage points over the next strongest comparator. On the same benchmark, DualRes achieves a 1.44-fold recording-level speedup and a 24.8-fold reduction in checkpoint storage relative to a selective state-space baseline under matched hardware and runtime conditions. Bearing results reveal task-dependent trade-offs. These findings support oscillatory memory as a compact approach to vibration diagnosis under limited labelled exposure.

0.30

Factorized axis convolutional gated recurrent unit with dynamic adaptive pooling for remaining useful life prediction of rolling bearings

cs.AI ·2026-09-25 ·Hanbyeol Park, Jungho Choo, Hyerim Bae
similarity 0.52
Abstract

Convolutional neural networks (CNN) are widely used to predict the remaining useful life (RUL) of rolling bearings from time-frequency representations (TFRs) of vibration signals. However, during degradation, characteristic structures in TFRs align predominantly along the frequency or time axis, making it challenging for conventional CNN isotropic kernels to capture directional structure. Furthermore, global average pooling (GAP) averages across axes, potentially obscuring the locations and concentrations of salient activations. This study introduces a factorized-axis convolutional gated recurrent unit (GRU) that employs multiscale anisotropic convolution and dual-axis convolution block attention module to enhance directional features and highlight salient time-frequency regions. Dynamic adaptive pooling (DAP) adaptively aggregates the time-frequency-axis information from the extracted feature maps, whereas a GRU captures temporal dynamics in the latent representations and Monte Carlo dropout enables predictive uncertainty estimation. Experiments on two public bearing datasets demonstrate that the proposed model outperforms existing RUL prediction methods across operating conditions. Ablation experiments demonstrate that the factorized axis-wise design achieves lower mean errors than convolutional isotropic kernels. DAP yields clear improvements on one dataset while matching GAP on the other, highlighting the importance of anisotropic feature extraction and adaptive feature aggregation for TFR-based RUL prediction.

0.21

From Winding-Fault Geometry to Reliability: Estimation and Prognosis of Stator Inter-Turn Faults

eess.SY eess.SP ·2026-09-11 ·Bambang L. Widjiantoro, Syahrul Munir, Katherin Indriawati, Moh Kamalul Wafi
benchmark similarity 0.51
Abstract

This paper develops an integrated framework for estimation, prognosis, and reliability assessment of stator inter-turn faults in induction motors. The fault is characterized by its severity, defined as the fraction of short-circuited turns, and its spatial orientation. A geometric fault model shows that the resulting output signature is affine in the fault severity and exhibits a fundamental spatial periodicity. Exploiting this structure, an augmented-state particle filter jointly estimates the nonlinear electromechanical state and the unknown fault severity while quantifying posterior uncertainty. The estimated degradation is then propagated using four prognostic models: linear trend, Holt exponential smoothing, Bayesian degradation, and particle-based forecasting. Their predictions are connected to threshold-crossing remaining useful life (RUL), first-passage reliability, degradation-dependent hazard reliability, and a Weibull lifetime benchmark, thereby providing both deterministic and probabilistic health assessments. Numerical results demonstrate accurate online fault estimation and output reconstruction, characterize the effects of degradation pattern and prediction horizon on prognosis, and show consistent reliability and threshold-crossing predictions. Moreover, estimation accuracy remains comparable across the distinct fault orientations induced by the spatial periodicity. The resulting framework provides a unified connection from physics-based inter-turn fault modeling to online diagnosis, degradation prognosis, and reliability assessment.

0.25

Motor compound fault diagnosis using an attention-based cross-talk architecture

cs.AI cs.LG ·2026-10-19 ·Wonjun Yi, Wonho Jung, Junho Kim, Rismaya Kumar Mishra, Yong-Hwa Park
similarity 0.50
Abstract · Submitted to ICSV33

As physical AI increasingly relies on sensing to understand physical systems, reliable condition monitoring of industrial machinery has become more important. Motors are ubiquitous in industrial systems, and increasing system complexity raises the likelihood of simultaneous faults. Accordingly, compound fault diagnosis that identifies multiple fault components and their severities is increasingly required. Because different fault components jointly affect the same vibration signal, their severity classification can be formulated as related tasks, making multi-task learning (MTL) suitable for exploiting shared information. However, conventional shared-trunk architectures force tasks to share a common representation, potentially causing negative transfer because fault components are characterized by different time-frequency regions. To address this issue, this study proposes a Residual Neural Dimension Reductor with Time-Frequency Channel Attention (RNDR-TFCA), an attention-enhanced cross-talk architecture for multi-output compound fault diagnosis. RNDR-TFCA preserves task-specific feature extractors while selectively exchanging information across tasks. Time-frequency attention emphasizes informative intra-task regions, while channel attention enhances useful inter-task information after nonlinear feature fusion. Experiments on a rotor-bearing system with inner-race fault, outer-race fault, misalignment, and unbalance showed that RNDR-TFCA achieved a macro F1 score of 0.898, outperforming single-task, multi-class, shared-trunk, and cross-talk baselines. Ablation experiments confirmed the benefit of jointly applying both attention mechanisms. RNDR-TFCA required 713 K parameters and 170.42 MMACs, only slightly higher than RNDR. Channel-expanded baselines still underperformed RNDR-TFCA, indicating that the gain was not simply attributable to increased model capacity.

0.26

A Data-Driven Approach to State Construction in Markov Models

cs.LG stat.MLmath.PRstat.ME ·2026-08-21 ·Linde Van Gestel, Marie-Anne Guerry, Evy Rombaut
similarity 0.50
Abstract

A Markov chain is a widely used stochastic process modelling random events over time. These models are built on subsets of the entire dataset, referred to as states, which are considered to be homogeneous regarding transition probabilities. However, the creation of these states is often disregarded or based on prior assumption, potentially violating the homogeneity requirement and thus decreasing the validity and predictive power of the model. In order to fill this gap, this paper combines supervised feature selection with unsupervised learning techniques for data-driven state construction. Density-based clustering, spectral clustering, and Kohonen self-organizing maps are examined for their ability to identify latent groups without prior assumptions. The contribution of this study is twofold. First, the paper presents a methodological framework for state construction incorporating suitable unsupervised learning techniques, with appropriate measures both for classification performance and Markov model accuracy. Secondly, the framework is tested on an application, resulting in a comparative analysis showing that spectral clustering and Kohonen self-organizing maps are best at capturing inherent structure. These results serve as a cornerstone in providing theoretical and methodological guidance for improving state definition in applied Markov modelling.

0.25

Stagewise Anomaly Detection for E-Transaxle Quality Monitoring Using Wavelet and STFT Features

eess.SP cs.LGstat.OT ·2026-08-27 ·Mohammad N. Bisheh, Rajesh Gupta, Qian Wang, Mohammad Babakmehr, Colin Brady +3 more
similarity 0.49
Abstract

This paper presents two interpretable machine-learning frameworks for quality screening of e-transaxle assemblies in electric vehicles: a Stagewise Wavelet Isolation Forest (SWIF) framework and a short-time Fourier transform (STFT)-based diagnostic framework. High-dimensional vibration signals acquired from front and back accelerometers are analyzed across multiple operating stages to capture stage-dependent vibration behavior. In the SWIF framework, signals are decomposed using a five-level Daubechies-4 discrete wavelet transform, and blockwise mean-squared coefficients are extracted from the selected wavelet detail level to obtain compact multiscale features. In the STFT-based framework, dominant-frequency trends are extracted from time-frequency representations and summarized through regression coefficients with respect to instantaneous motor speed. Anomaly detection models are trained using accepted production units under the assumption that only a small fraction of accepted assemblies contain latent defects, and their performance is evaluated using road-tested units with validated quality outcomes. Experiments on production and road-tested e-transaxle units show that both approaches provide interpretable diagnostic information, while SWIF achieves the most favorable balance between defect detection and false-positive control. Compared with the STFT-based method and alternative anomaly detectors, SWIF combined with Isolation Forest yields lower anomaly rates within the Accept population while identifying high-risk units from the Reject population. The stagewise structure further localizes anomalous behavior to specific operating conditions, supporting root-cause analysis and targeted process improvement.

0.44