CS Paper Radar

From Winding-Fault Geometry to Reliability: Estimation and Prognosis of Stator Inter-Turn Faults

Bambang L. Widjiantoro, Syahrul Munir, Katherin Indriawati, Moh Kamalul Wafi

eess.SY eess.SP ·submitted 2026-09-11 19:08 UTC · v2
benchmark

Abstract

This paper develops an integrated framework for estimation, prognosis, and reliability assessment of stator inter-turn faults in induction motors. The fault is characterized by its severity, defined as the fraction of short-circuited turns, and its spatial orientation. A geometric fault model shows that the resulting output signature is affine in the fault severity and exhibits a fundamental spatial periodicity. Exploiting this structure, an augmented-state particle filter jointly estimates the nonlinear electromechanical state and the unknown fault severity while quantifying posterior uncertainty. The estimated degradation is then propagated using four prognostic models: linear trend, Holt exponential smoothing, Bayesian degradation, and particle-based forecasting. Their predictions are connected to threshold-crossing remaining useful life (RUL), first-passage reliability, degradation-dependent hazard reliability, and a Weibull lifetime benchmark, thereby providing both deterministic and probabilistic health assessments. Numerical results demonstrate accurate online fault estimation and output reconstruction, characterize the effects of degradation pattern and prediction horizon on prognosis, and show consistent reliability and threshold-crossing predictions. Moreover, estimation accuracy remains comparable across the distinct fault orientations induced by the spatial periodicity. The resulting framework provides a unified connection from physics-based inter-turn fault modeling to online diagnosis, degradation prognosis, and reliability assessment.

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Sequential Test Planning for Multi-Mechanism Reliability Qualification via Bayesian Monte Carlo Tree Search

cs.AI eess.SY ·2026-08-10 ·Youssef A. Elhagrasy, Ian Hill, André Ivanov
top venue similarity 0.54
Abstract · Accepted to IEEE Transactions on Reliability

Reliability qualification of advanced semiconductor devices requires sequential stress decisions that balance characterization objectives against multiple competing failure mechanisms. Current practice relies on static test plans derived from population-level acceleration models, which cannot adapt to per-unit variability or real-time degradation observations. This paper presents a closed-loop adaptive test planning framework that formulates reliability qualification as a partially observable sequential decision problem and solves it using Monte Carlo tree search for seed-action simulators (MCTS-SA) coupled with extended Kalman filter (EKF) belief-state estimation. The framework models stochastic, per-device variability in bias temperature instability (BTI), electromigration (EM), and time-dependent dielectric breakdown (TDDB), and treats stress selection as a constrained sequential optimization, i.e., to maximize the probability of successful degradation characterization while respecting catastrophic failure constraints. Under the experimental assumptions used here (discrete stress actions, proxy damage observability, and cumulative degradation without recovery), we believe this to be a novel application of tree-search-based adaptive test planning to multi-mechanism reliability qualification. Across 5,000 planning iterations, the characterization yield (CY) improves from 20% in the first 500 iterations to over 54% in the final 500, with 39% cumulative success, while the best successful test sequence terminates with EM and TDDB damage fractions DEM=0.564 and DTDDB=0.537, well within safety margins. These results demonstrate that sequential Bayesian planning can synthesize damage-aware test policies that significantly outperform non-adaptive strategies for reliability qualification under competing failure modes.

0.35

Hidden Markov Model-Based Remaining Useful Life Estimation of Rolling Bearings Using Vibration Signals: A feasibility study

eess.SP ·2026-09-23 ·Ioannis Ksoulos, Dimitrios M. Bourdalos, John S. Sakellariou, Sonia Malefaki
top venue similarity 0.51
Abstract · 14 pages, 10 figures. Accepted for publication in the Proceedings of the 10th International Conference on Risk Analysis (ICRA10), Patras, Gr…

This feasibility study presents a Hidden Markov Model (HMM)-based methodology for the Remaining Useful Life (RUL) estimation of rolling element bearings when the training vibration signals differ significantly from those of the target bearing. An AutoRegressive (AR) model is first employed to capture the machinery dynamics using vibration acceleration measurements from an initial operating period where all components including the considered bearing are still under healthy condition. The AR model is subsequently used to filter a newly acquired vibration signal from the faulty machinery, and typical Envelope Analysis is performed on the residual signal to identify fault-related repetition frequencies. The amplitudes of these frequencies, combined with statistical features of the AR residuals are fused through Principal Component Analysis to construct a sensitive to bearing degradation Condition Indicator (CI). Based on training data from the healthy state, a threshold is established, and a fault is declared when the CI exceeds this threshold. Once a fault is detected, its progression is modelled as a sequence of consecutive, distinct states, which are identified using K-Means clustering. A left-right HMM with continuous observation densities is estimated to represent the fault progression and thus predict the RUL. The HMM-based RUL estimation methodology is trained using vibration measurements from a limited number of two run-to-failure experiments with two nominally identical bearings, while RUL estimation performance is assessed on a third bearing of the same type. Despite the significant differences between the vibration data used for training and the life cycles of the training bearings with respect to the target bearing, the RUL estimation results indicate an adequate but conservative performance of the postulated HMM-based methodology.

0.49

Uncertainty and Business-Aware Remaining Useful Life Estimation for Semiconductor Manufacturing

cs.LG ·2026-08-26 ·Davide Frizzo, Francesco Borsatti, Gian Antonio Susto
similarity 0.51
Abstract · Submitted to IEEE Transactions on Semiconductor Manufacturing

Remaining Useful Life (RUL) estimates guide maintenance in semiconductor manufacturing, where a late intervention can disrupt production but an early one discards usable equipment life. A single prediction does not express the uncertainty needed to choose between these outcomes. We combine Deep Learning (DL) sequence models with Simoultaneous Quantile Regression (SQR) to estimate RUL at selectable quantile levels, and evaluate maintenance decisions using Unexpected Breaks (UB), Unexploited Lifetime (UL), and a cost-weighted objective. On the $F_1$ fault mode of the 2018 PHM Data Challenge (PHM18) ion-milling dataset, we compare recurrent, Transformer, and State Space Models (SSM) architectures. Diagonal State Spaced (S4D) gives the strongest overall RUL accuracy across the evaluated quantiles. Varying the quantile and maintenance window exposes the trade-off between failure risk and early intervention; under the examined cost ratios, the resulting decisions have lower cost than the Preventive Maintenance (PvM) baselines.

0.22

Transformer-guided Variable Projection for Phasor and Fault-Time Estimation Under DDC Offset

eess.SY ·2026-11-02 ·Marcus Chen I Wada, Sina Mohammadi, Van-Hai Bui, Wencong Su
unusual similarity 0.49
Abstract · 5 pages, 3 figures, 3 tables. Submitted to PESGM

Decaying DC (DDC) offsets introduce substantial phasor estimation errors during the first post-fault cycle. Recent approaches have sought interpretable waveform representations, but identifying analytical expressions can incur substantial computational costs. This paper proposes a transformer-guided variable-projection estimator that extracts the fundamental phasor, DDC parameters, and fault inception time from point-on-wave (POW) samples as an interpretable analytical expression. An offline-trained transformer provides the signal structure and decay rate, while variable projection refines the parameters and handles windows containing the fault without knowledge of time of fault. Across single- and dual-DDC scenarios with time constants of 2.5--400~ms, the mean maximum overshoot (MO) is at most 2.7% on post-fault windows and 2.2% during online operation, where the DFT reaches 10--14%. The post-fault phasor settles within 5% approximately 12.5~ms after inception. Circuit-level validation on a 230-kV two-source system yields 1.6% mean MO, compared with 9.5% for the DFT.

0.32

Integrating Survival-Based Aging Models with Data-Driven RUL Prognostics

cs.LG ·2026-10-05 ·Abhishek Srinivasan, Juan Carlos Andresen, Sepideh Pashami, Anders Holst
published similarity 0.49
Abstract · 14 pages, 7 figures, 1 tables, conference proceeding

Predictive maintenance requires reliable remaining useful life (RUL) estimation. Existing methods mainly follow two paradigms: wear-based aging models that capture cumulative degradation and sensor-driven data models that reflect instantaneous health conditions, each providing only partial information. In this work, we propose a probabilistic fusion framework that integrates wear-based and sensor-based prognostic components through failure probability distributions. Based on explicit structural assumptions linking wear, latent health, sensor observations, and failure, we derive a principled combination rule that enables uncertainty-aware integration with adaptive weighting of the components. Experimentally, we assess this combination rule by learning the wear-based component using a parametric survival model and the sensor-based component using a 1D convolutional neural network (1D-CNN) with a post-hoc uncertainty model. Evaluation on multiple N-CMAPSS datasets demonstrates that the fused model improves point accuracy, preserves the C-index, and produces narrower yet well-calibrated prediction intervals compared to either component alone. The results highlight the complementary roles of wear-based survival model and sensor-based deep learning model, and show that their probabilistic integration provides a structured pathway toward more robust and consistent prognostics over the life-time.

0.35

TREDD: Robust Trend-Based Reference Evaluation for Interpretable Degradation Detection

eess.SY ·2026-09-14 ·Elisabeth Vogel, Ronny Porsch, Peter Langendoerfer
similarity 0.49
Abstract · 7 Pages, 2 figures, Conference: IECON 2026 (18 to 21 October 2026)

Technical systems are increasingly monitored using sensor and operational data to detect degradation and performance deterioration at an early stage. However, observed trends in measurement data do not necessarily correspond to physical aging, since noise, outliers, unstable initial regions, or changing operating conditions may produce similar patterns. This paper proposes Trend-based Reference Evaluation for Degradation Detection (TREDD), an interpretable method for detecting degradation as a persistent, trend-based deviation from an early reference state. TREDD combines rolling-window smoothing, baseline estimation, a direction-dependent degradation index, long-term trend extraction, and persistent drift detection. In addition, the method separates computational drift detection from the interpretation of drift as plausible physical aging by incorporating data-quality assessment, context checking, and robust auxiliary analysis. The approach is evaluated on the NASA Lithium-Ion Battery Aging Dataset using discharge-cycle capacity as the degradation-relevant condition variable. The representative case study illustrates that TREDD can identify clear degradation trajectories while assigning reduced confidence to weak, gradual, or atypical trends. The method therefore supports transparent and confidence-based degradation interpretation rather than purely predictive battery health estimation.

0.13

CORD: Learning Reusable Degradation Representations Across Heterogeneous Physical Systems

cs.LG ·2026-09-30 ·Haibo Li, Zhiguo Zeng
similarity 0.47
Abstract · Preprint

Can heterogeneous physical degradation systems benefit from joint pretraining and move beyond system-specific prognostics toward reusable cross-system representation learning? CORD combines type-specific observation interfaces with a shared degradation backbone. Its two self-supervised objectives learn at complementary scales: Intra-Observation Structure Modeling (ISM) captures structure within observations, while Inter-Observation Dynamics Modeling (IDM) captures latent degradation evolution across observation histories. We evaluate CORD under two transfer boundaries: Pretraining-Included System Types, where downstream datasets and held-out units are unseen but their system types are represented during source pretraining, and Pretraining-Excluded System Types, where the entire turbofan-engine type is absent from pretraining. Across bearings, batteries, and cutting tools, CORD (Multi-domain) consistently improves over CORD (Single-domain) under Frozen adaptation, provides further gains under Full FT in most settings, and remains competitive with representative external baselines. Source-pretrained initialization also improves low-label adaptation to the pretraining-excluded engine type. Frozen-representation analysis further shows improved cross-unit lifecycle consistency after multi-domain pretraining. Joint pretraining across heterogeneous physical systems thus produces degradation representations reusable across devices, datasets, and system types.

0.24

From Laboratory Aging Studies to Field Predictions: Quantifying Uncertainty in Battery Storage Lifetime Predictions

eess.SY ·2026-09-09 ·Melina Graner, Jan Figgener, Andreas Jossen, Holger Hesse
benchmarkcode/data similarity 0.47
Abstract

Predicting how long a battery energy storage system will last is critical for warranty design, maintenance planning and investment decisions, yet degradation models are mostly deterministic and rarely validated against real field data. We apply an open-source probabilistic degradation framework, combined with a cell-to-system approximation, to bridge the gap between cell-level laboratory aging models and system-level field predictions for residential battery energy storage systems with quantified uncertainty. The framework predicts cell-level state-of-health to within 0.4 % mean absolute error, roughly half the error of prior models for this dataset. When applied to field operation data, the framework's predictions are consistent with all three available system-level capacity measurements - a benchmark rarely available for open probabilistic degradation models. Cell-level heterogeneity is approximated by two bounding stress scenarios differing only slightly (a 5 % spread in temperature and a 9 % spread in current). The mean degradation trajectories of the two scenarios reach end-of-life 10 months apart, while the full predicted end-of-life range across both scenarios spans approximately three years, about a third of the expected system lifetime. We link this uncertainty to two drivers. One is a systematic mismatch between laboratory test conditions and field-representative operating stress. The other is variability in the training data itself. These insights translate into concrete, resource-efficient recommendations for future aging study design, supporting more confident predictions of battery lifetime under real-world conditions.

0.17