CS Paper Radar

SHRAV: State-Hypothesis-Reason-Action-Verify Framework for Physical Modeling and Inverse Design

Ziheng Guo, Yang Bu

cs.AI cs.CEphysics.comp-phphysics.optics ·submitted 2026-09-23 09:44 UTC · v2
unusual

Abstract

Physical modeling and inverse design require computation that can continue from reusable state. We introduce SHRAV, an architecture-independent computational framework organized around State, Hypothesis, Reason, Action, and Verify. Its central mechanism is a state-continuation core with declared reuse boundaries and explicit roles for learned evolution and numerical quantities. Forward configurations evolve predictive state and read out physical responses; inverse-design configurations additionally generate target-directed modifications and consume evaluator feedback. Electromagnetic world-model studies are mapped to forward configurations, with selected readout and reuse diagnostics reported here. Computational lithography demonstrates an inverse-design configuration: four fixed-weight design updates improve thresholded aerial-image intersection-over-union from 0.5313 to 0.8153 under independent scalar-pupil replay, with a maximum absolute IoU difference of approximately 0.000824 between predictor estimates and independent replay.

Comment
7 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

LithoWorld: An Endpoint World Model for Lithography Process-Window Recovery

cs.CV ·2026-10-16 ·Botong Zhao, Fang Yu, Xinyuan Chen, Yue Lu
unusual similarity 0.55
Abstract

Lithography process drift can move a fabricated pattern outside its process window, producing unqualified scanning electron microscopy (SEM) morphology. We present LithoWorld, an endpoint world model for SEM-guided parameter recovery. Interior representative targets jointly determine qualified reference appearance and correction supervision. A causal predictive branch aligns currentimage features with endpoint representations, while a conditional flow policy generates a two-dimensional correction as an action chunk. The model learns from 173 groups of measured SEMs organized as focus-exposure maps, preserving unmeasured cells as unknown. On 200 test pairs from the 73-group subset, LithoWorld achieves 88.5% qualified-region success and 46.0% interior success, exceeding the strongest comparison method by 2.5 and 6.0 percentage points, respectively. Ablations separate the effects of target selection, endpoint alignment, and output parameterization. Qualitative SEM retrieval illustrates recovery to qualified interiors without requiring exact reference-coordinate matching.

0.22

PISim: A Unified Photonic Inference Simulator for Hardware-Aware Cross-Layer Design-Space Exploration

cs.AI physics.optics ·2026-11-12 ·Andreas Falkenberg
similarity 0.54
Abstract · 8 pages, 2 figures

Photonic neural accelerators offer ultra-low latency linear algebra, yet their usable numerical precision, sustainable throughput, and application accuracy remain tightly bounded by surrounding electro-optical interfaces and physical non-idealities. Pre-fabrication design-space exploration (DSE) requires a cross-layer electronic design automation (EDA) framework capable of evaluating disparate optical topologies under identical neural workloads and physical assumptions. We present \textbf{PISim}, a unified Photonic Inference Simulator that couples pretrained deep neural network execution with physics-based models of six accelerator architecture families, six electro-optic modulator technologies, four optical source organizations, and direct or coherent readout schemes. PISim embeds stage-resolved impairment operators---covering control and analog-to-digital quantization, finite extinction ratio, shot noise, correlated relative-intensity noise (RIN), thermal drift, propagation loss, and channel crosstalk---alongside an analytical cycle-level interface timing model to expose electronic-optical bottlenecks. Using simulated MNIST multilayer perceptron (MLP) benchmarks, we demonstrate how PISim identifies optimal precision operating points under multi-impairment stress (peaking at 6 bits for Mach--Zehnder and microring modulators), quantifies a 52.5 percentage-point accuracy gap between VCSEL-array and parallel-fanout laser architectures arising, under the modeled conditions, from power partitioning and correlated source noise, and models interface-limited throughput scaling across emitter-array widths from 32 to 128 channels. This comprehensive framework establishes an extensible, reproducible foundation for accuracy-constrained Pareto optimization prior to photonic tape-out.

0.25

D-JEPA: Design-Recoverable JEPA Representation with Swappable Physics Decoders

cs.LG cs.AI ·2026-09-27 ·Nitin Nagesh Kulkarni, Aashwin Anand Mishra, Yin Yu, Peter Lyu
similarity 0.51
Abstract

Joint-Embedding Predictive Architectures (JEPAs) provide a framework for learning compact representations without directly reconstructing high-dimensional observations. However, in parameterized physical systems, learned representations can entangle geometry with operating conditions and task-specific physical responses, limiting their reuse across prediction tasks. We introduce D-JEPA (Design-recoverable JEPA), a geometry-centric JEPA that computes a compact representation from geometry alone and reuses it across operating conditions and physical response spaces through lightweight physics-specific decoders. An explicit design-recoverability objective encourages the geometry latent to preserve information about the underlying design variables, enabling the representation to support design analysis and optimization. We further identify a case-level collapse failure mode in which target representations become nearly invariant across distinct geometries despite low reconstruction error, and mitigate it using case-level variation constraints and auxiliary target reconstruction. Across four 3D aerodynamic, hydrodynamic, and structural benchmarks, D-JEPA maintains or improves full-field prediction accuracy while achieving near-perfect linear recoverability of design parameters. The frozen geometry representation can be reused at held-out operating conditions and transferred to a structural response task with fewer trainable parameters. Finally, the representation supports differentiable design optimization, with designs validated using high-fidelity CFD, preserving the predicted ranking of candidate designs. These results demonstrate that separating a reusable geometry representation from physics-specific prediction provides a practical representation for scientific surrogate modeling and design.

0.18

Separating learning from search and feedback in budgeted inverse design of periodic unit cells

cs.CE cs.LG ·2026-11-16 ·Shaoliang Yang, Jun Wang
similarity 0.51
Abstract · 49 pages, 11 figures, including Supplementary Information

To design a periodic material, engineers choose the shape and dimensions of a repeating cell to meet target properties. With few simulations, the benefit of a learned predictor can be hard to separate from the effect of which designs the search tries and how it uses simulator feedback. We compare two ways to predict properties in a library of 80 cell architectures, with up to 30 simulator calls per target. For each architecture, both searches use a table of predicted properties at different dimensions. One fills the table with predictions from neural networks. The other fits a simple model to the existing simulations for that architecture. Both searches use the difference between the predicted and simulated properties to adjust the next design. We generated 200 targets from simulated designs after fixing the analysis plan. The two searches showed no detectable difference in how often they matched all three properties within 2% or in the mean error of their returned designs. The upper limit of the 95% confidence interval for the gain in overall success rate was 4.5 percentage points. Follow-up controls on these targets changed success from 83.5% to 36.0% with a degraded table and 96.5% with an oracle table. In separate tests, using the simulation result to adjust the next design increased success for both types of table. Results cover one library and a coarse 32^3 voxel simulator. Designers can use this comparison to judge what a learned predictor adds when the search, feedback and budget are the same.

0.36

Formal-Verification-Guided Bayesian Optimization for Non-Intrusive Last-Mile Coverage Closure

cs.AR cs.LG ·2026-10-12 ·Chengjia Liu, Priyadarsi Mishra, David Kebo Houngninou, Michael Quinn, Aakash Tyagi +1 more
published similarity 0.50
Abstract · 21 pages, 3 figures, 7 tables. Accepted for publication in ACM Transactions on Design Automation of Electronic Systems (TODAES)

Last-mile functional coverage closure for modern chip designs remains costly because a mature UVM environment exposes many controls while direct hits on the remaining bins are sparse. We present a non-intrusive workflow that closes pre-defined bins in an existing, human-authored functional coverage model; it does not synthesize verification objectives from the design specification. The workflow first uses abstract-syntax-tree (AST) parsing and cone-of-influence (COI) tracing to map each residual target to existing testbench knobs. Under a matched 20-simulation budget, Bayesian optimization (BO) is compared with continued constrained-random verification (CRV) and random search over the same AST/COI-reduced space. Formal reachability then removes only targets supported by complete unreachability proofs, after which retained targets are grouped by formal difficulty and processed by group-specific BO under a second matched 20-simulation budget. Cleanup and grouping never add numerator bins; only simulator coverage artifacts do. On OpenTitan AES, first-pass reduced-space BO reaches 241/271 bins; formal cleanup removes two denominator bins; the integrated post-cleanup stage - difficulty grouping, policy routing, and group-specific BO - adds 20 simulator-confirmed hits, yielding 261/271 raw coverage (96.31%) and 261/269 effective coverage (97.03%). On Entropy Source, first-pass reduced-space BO reaches 2117/2277 bins; formal cleanup removes ten denominator bins; the integrated post-cleanup stage - difficulty grouping, policy routing, and group-specific BO - adds 93 simulator-confirmed hits, yielding 2210/2277 raw coverage (97.06%) and 2210/2267 effective coverage (97.49%). These results characterize the integrated diagnosis-and-search workflow; the present evaluation does not isolate the causal contributions of difficulty classification, policy routing, and post-cleanup BO.

0.36

HALO: A Physics-Aware LLM Agent Framework for Nanophotonic Design

cs.MA physics.optics ·2026-08-28 ·Yubo Zhang, Jinlin Xiang, Zijun Zhao, Yang Zhao, Eli Shlizerman +1 more
benchmarkhot direction similarity 0.50
Abstract · 9 pages, 3 figures, 5 charts

Language models have recently been applied to nanophotonic design, but it remains unclear whether they can reliably translate optical objectives into simulation-ready designs, execute electromagnetic analysis, and revise decisions from numerical feedback. We introduce HALO, a physics-aware framework that couples language-model planners with typed design specifications, electromagnetic simulation, diagnostic evaluation, and optional reuse of prior failure trajectories in an iterative design loop. We further introduce HALO-Bench, a 52-task benchmark spanning lab-derived, paper-derived, and open-ended nanophotonic design tasks under a shared evaluation protocol. We compare three planner configurations: a Fixed Structured Workflow, an Autonomous Structured Agent using the same simulation interface, and an Autonomous Coding Agent that directly writes and executes simulation code. The Fixed Structured Workflow is the most token-efficient and exhibits no observed code- or path-level failures, while autonomous coding can achieve higher task success with stronger models at the cost of additional operational failures. We also study reuse of prior failed trajectories. On targeted multi-round tasks, retrieved failure feedback reduces both iterations to first success and total token use. These results clarify the tradeoffs between explicit interfaces, autonomous execution, and reusable design experience in scientific agents.

0.26

Benchmarking Optimizers to Solve Inverse Problems with Differentiable Physics Simulators

cs.LG math.OCphysics.comp-ph ·2026-09-12 ·Xiang Chen, Huanhuan Xia
similarity 0.50
Abstract

Solving inverse problems with differentiable physics simulators holds the potential to revolutionize scientific discovery and engineering design, as it enjoys both the strict physical correctness from rigorous numerical physics simulators, and the high efficiency and effectiveness from automatic differentiation and gradient-based optimization. However, currently, this paradigm faces performance issues in optimization. In this work, we target benchmarking the performance of different optimizers to solve various inverse problems. We construct 12 differentiable physics simulators spanning physics domains including discrete mechanics, continuous mechanics, atomistic simulations, rendering, and semi-empirical physics models. Based on these simulators, we design corresponding inverse problems that can be categorized into parameter identification, inverse design, and optimal control. Finally, we conduct extensive experiments to compare the performance of different optimizers, including regular first-order methods, approximate second-order methods, as well as global optimizers, on these inverse problems, and analyze the results to provide insights on how to choose and design optimizers for differentiable programming. We hope such benchmarks can inspire the development of more effective optimizers, and further promote the applications of differentiable programming in various scientific and engineering domains.

0.22

VortexChat: An agentic framework for autonomous multi-objective integrated photonic design

cs.AI physics.optics ·2026-08-21 ·Faqian Chong, Yulun Wu, Shilong Li, Andrew Forbes, Hongsheng Chen +1 more
benchmark similarity 0.50
Abstract

The advancement of modern integrated photonics is frequently bottlenecked by device design workflows that rely heavily on manual simulation and expert intuition. While inverse design offers an alternative, it remains constrained by expert supervision and a lack of end-to-end automation. To address these issues, we present VortexChat, an agentic framework for the autonomous, end-to-end inverse design of integrated photonic devices directly from natural language specifications. VortexChat couples a large language model (LLM) decision agent with topology generation, gradient-based refinement, and full-wave electromagnetic simulation. This closed-loop architecture enables the system to iteratively decompose design objectives, orchestrate computational tools, and update strategies based on feedback with minimal human intervention. Constrained by the absolute metrics of the Vortex100 Benchmark, VortexChat autonomously generates devices that strictly meet all predefined performance thresholds without any human-in-the-loop. As an experimental demonstration, we fabricated a broadband terahertz perfect vortex beam multiplexer, autonomously designed by VortexChat, with measurements confirming high-efficiency operation, high mode purity and low inter-channel crosstalk in agreement with full-wave simulations. These results demonstrate that an LLM agent can assume key aspects of expert decision-making in photonic inverse design while maintaining physical fidelity and fabrication feasibility, providing a scalable route towards autonomous design of complex integrated photonic systems.

0.25