CS Paper Radar

A Non-Invasive Cloud-Based Migration Strategy for Post-Quantum Cybersecurity in Smart HVAC Systems: Architecture, Implementation, and Empirical Evaluation

Mahedee Zaman Moon, Kaysarul Anas Apurba, Md Hasibul Hasan, Sk Md Mizanur Rahman

cs.CR cs.AIeess.SY ·submitted 2026-08-19 04:11 UTC · v1

Abstract

Legacy smart HVAC controllers rely on vendor-cloud TLS secured by ECDH and RSA, both broken by Shor's algorithm, and typical 10-15 year lifespans mean today's devices remain in service through the quantum-threat era. Direct on-device post-quantum cryptography is infeasible: an ESP32-S3, representative of capable HVAC hardware, has only 339 KB free heap against the 900 KB ML-KEM-768 requires, and even classical ECDH-P256 keygen (111.93 ms) dwarfs hardware AES-128 (0.032 ms). We propose a non-invasive PQC proxy, requiring no device, firmware, or vendor-cloud changes, performing ML-KEM-768 encapsulation and ML-DSA-65 authentication (NIST FIPS 203/204) with AES-256-GCM session keys via HKDF, implemented with Open Quantum Safe liboqs on a Raspberry Pi 4B gateway. Over 500 runs, the post-quantum handshake (Steps 1-6) completes in 2.48 ms, 0.38 ms slower than classical baseline, with PQC computation around 8% of handshake time at 20 ms simulated round-trip network latency. The gateway sustains 443 sessions/second, 100% success under 32 concurrent connections, extrapolating to 3546 sessions/second on a 32-core cloud instance. Five side-channel tests, including verified in-place session-key zeroization and a fixed-vs-random TVLA timing analysis, found no exploitable timing leakage or susceptibility to man-in-the-middle attacks. The architecture is vendor-agnostic and becomes unnecessary once vendors adopt NIST PQC natively.

Comment
27 pages, 12 figures (3 architecture diagrams, 9 experimental plots), 6 tables. Preprint; work in progress. Presents a non-invasive post-quantum cryptography proxy for smart HVAC systems with empirical evaluation on Raspberry Pi 4B and ESP32-S3 hardware (ML-KEM-768, ML-DSA-65, liboqs)

Closest papers

Nearest neighbours by meaning across the whole index.

A Hybrid Post-Quantum Encryption Architecture with Self-Hosted Key Management for SME Cloud Data Protection

cs.CR ·2026-08-27 ·Muhammad Shaheer Bin Junaid
similarity 0.71
Abstract

Harvesting ciphertext from cloud storage needs no quantum computer; decrypting it later does. That gap is the harvest-now-decrypt-later exposure: anything protected by RSA or ECDH today that must stay secret for decades is already compromised. Small and medium-sized enterprises are least able to respond: they neither run the infrastructure on which their data sits on nor employ a cryptographer. Bespoke migration suits firms with security budgets; a managed key service relocates trust rather than removing it. The obstacle is architectural, not cryptographic. We present Quantum Cloud Guard (QCG), a software-only three-layer architecture. No prior SME-oriented system combines its three elements: client-side hybrid post-quantum encryption, self-hosted key custody with client-verifiable ML-DSA-87 signatures on served keys, and an integrated application-layer abuse-prevention gateway. Files never leave the client: each is sealed under AES-256-GCM, its key wrapped to an ML-KEM-1024 public key from the enterprise's key service. The enterprise alone administers it; it signs every key with ML-DSA-87, so a client that pinned it detects substitution. Separating key custody from data custody is the point: a provider holding both can read the data. On a 24 MHz STM32F407, ML-KEM-1024 key generation takes 40.8 ms and decapsulation 44.0 ms; on the server every post-quantum operation stays sub-millisecond, signing adding 0.24 ms per request. The service runs on a 4.49 EUR/month virtual server. Under sustained flooding, the in-process gateway Sentinel Gate rejected 98.8% of attack traffic while a legitimate client's median latency moved from 621 to 625 ms. Being single-source, this shows filtering effectiveness, not DDoS resilience.

0.35

Policy-Governed Post-Quantum Migration for Legacy Microservices Using Ephemeral Sidecar Architectures

cs.CR ·2026-09-13 ·Nirmal Kumar Jingar
published similarity 0.69
Abstract

The fast development of quantum computing represents a big risk to classical cryptography that is commonly used in cloud native and microservice based enterprise systems. Traditional cryptographic primitives are closely linked to legacy microservices and it is both intricate, hazardous, and disruptive to straight up migrate to post-quantum cryptography (PQC). In a bid to overcome these issues, this research presents a PolicyGoverned Post-Quantum Migration through Ephemeral Sidecar Architectures (PG-PQMES), a framework of dynamic and reversible migration that allows transparent adoption of PQC without any modifications in the legacy code of applications. The architecture is a combination of three coherent layers, including Ephemeral Crypto Sidecar Layer which injects the runtime cryptography, Policy Governance Layer which manages the migration centrally, and Migration Safety and Observability Layer which measures the performance and rolls back automatically. An innovative Policy-Governed Ephemeral PQ Migration (PG-EPM) algorithm is proposed to maximize the performance, compliance, and trust-based migration. In simulated environment of microservices, experimental assessment shows that the time of migration, service downtime, overheads of latency, and rollback recovery time are substantially reduced using the current migration strategies. The findings show that a sidecar-based migration strategy that is policy-based offers a viable, scalable, and enterprise-scale migration to a secure post-quantum transformation.

0.14

Energy Consumption of Post-Quantum Cryptography on Constrained and General-Purpose Architectures

cs.CR ·2026-10-19 ·Olivier Gillot, William J. Buchanan, Madjid G. Tehrani
published similarity 0.69
Abstract

With Q-day approaching, the transition to post-quantum cryptography (PQC) has begun, with governments across the US, UK and EU mandating migration to quantum-resistant standards. This paper benchmarks the three NIST-standardised PQC algorithms - FIPS 203 (ML-KEM), FIPS 204 (ML-DSA) and FIPS 205 (SLH-DSA) - across key generation, signing and verification operations, measuring both computational performance and energy consumption on a range of constrained IoT-class devices, from the 32-bit Raspberry Pi 1 and Zero to the 64-bit Raspberry Pi 4, as well as commodity laptop hardware. Using the FNIRSI FNB58 USB power meter and OpenSSL~3.5, results show that ML-KEM and ML-DSA achieve energy and speed efficiency comparable to classical elliptic-curve cryptography across all tested architectures. However, SLH-DSA signing is inadvisable on constrained hardware: energy costs for SLH-DSA signing on 32-bit devices were up to 243\% higher than on equivalent 64-bit hardware, making it impractical for resource-limited IoT deployments. These findings have direct implications for IoT security practitioners planning PQC migration.

0.61

Testing TLS 1.3 PQC on constrained devices and microcontrollers

cs.CR ·2026-10-20 ·Olivier Gillot, William J. Buchanan, Callum Turino
benchmark similarity 0.68
Abstract · 8 pages, 2 figures, 5 tables. Accepted at QSIoT 2026 (Workshop on Quantum-Safe and Intelligent Security for IoT and Cyber-Physical Systems, …

The UK, EU and US governments have set timelines for post-quantum cryptography migration of critical systems, with deadlines ranging from 2028 to 2035. This paper focuses on IoT-class devices and microcontrollers and the viability of using PQC to connect these devices in secure TLS 1.3 connections. Using wolfSSL, we benchmark a 36-combination TLS 1.3 algorithm matrix, pairing ML-KEM-512/768/1024 and X25519/ECC P-256 key exchange with ML-DSA-44/65/87, Ed25519, ECDSA, and RSA-PSS authentication, across four devices (Raspberry Pi Pico W & Pico 2 W, ESP32, and a Raspberry Pi Zero), measuring both handshake latency and energy consumption. We found that in capable devices, all choices in the TLS matrix gave similar results, but that in IoT-class devices, PQC performance is highly implementation- and architecture-dependent: the common assumption that elliptic-curve key exchange must be cheaper than post-quantum lattice-based key exchange does not hold in this wolfSSL-based implementation, where the best full-PQC combination (ML-KEM-512 + ML-DSA-44) completes TLS handshakes 41% faster than the equivalent classical-modern pairing (X25519 + RSA-PSS) on the Pico W (up to 2.12x as energy-efficient, depending on the paired authentication algorithm), and 8.9x faster on the ESP32. Full-PQC, ML-KEM-512/ML-DSA-44, is not only possible but energy-competitive with or superior to Hybrid or Elliptic Curve alternatives on the most constrained devices, though ML-DSA's variable signing time means applications with strict latency-predictability budgets must accept this variance as the cost of full quantum-safe authentication. We further show that the IETF's draft-specified X25519+ML-KEM-768 hybrid incurs approximately the combined cost of its two components, rather than offering a performance compromise, making pure ML-KEM the more practical choice on hardware lacking Curve25519 assembly support.

0.25

Securing Edge & Physical AI: Post-Quantum IoT Blockchain for Mission-Critical Cyber-Physical Agents

cs.CR cs.ETcs.RO ·2026-10-24 ·Kürşat Çakal, Suat Özdemir
published similarity 0.68
Abstract · 47 pages, 39 figures, 10 tables, 5 algorithms, to be published in IEEE IoTJ, Science Directy (Elseiver IoTJ, Embodied Intelligence in Physic…

Distributed Cyber-Physical Systems (CPS) and Edge AI networks increasingly depend on public-key authentication and key-establishment mechanisms that are vulnerable to cryptographically relevant Quantum Computers (QC). Shor's algorithm threatens widely deployed asymmetric primitives, while Grover's algorithm reduces the effective security margins of symmetric and hash-based mechanisms. Although Post-Quantum Cryptography (PQC) provides a migration path, its larger public keys, ciphertexts, and signatures introduce additional computation, memory, communication, storage, and packet-fragmentation costs that can constrain dynamic multi-agent systems. In this article, we introduce rotational secrecy, an architectural objective that limits temporal key exposure through authenticated transitions between cryptographic epochs. We present Private Authentication for Rotational Secrecy (PARS), a reference mechanism that coordinates policy-triggered key establishment, rotation, and reconciliation among authorized Physical AI agents. For deployments that need distributed agreement on security state, we further develop the PARS-Enabled Edge Security Ledger (PARS-ESL), an optional permissioned architecture maintained by authorized validators or capable edge gateways. PARS-ESL does not store high-volume operational transactions. Instead, it records authenticated state for key epochs, group membership, revocation, algorithm-suite policies, challenge validation, and recovery checkpoints. As a result, resource-constrained agents can take part as lightweight clients, and low-latency operational traffic stays outside the ledger consensus path, protected by the currently active symmetric epoch keys. Our results show that ledger-assisted post-quantum key-epoch management is feasible for selected Edge AI and CPS security-control workloads under the stated trust, compromise, connectivity, and resource assumptions.

0.40

Brief introduction to post-quantum cryptography in industrial applications

cs.CR ·2026-11-09 ·Mateusz Żarski, Jarosław Miszczak, Ilias Cherkaoui, Cédric Crettaz, Indrakshi Dey +7 more
surveybenchmark similarity 0.67
Abstract

The development of Post-Quantum Cryptography (PQC) is directly motivated by the necessity to secure information in the face of the quantum threat. This paper provides an overview of recent developments relevant to PQC adoption across several industrial applications, including IoT, healthcare, civil and infrastructure engineering, and defense. We present a brief, self-contained overview of PQC and its market positioning. We perform implementation experiments on selected quantum-safe methods and quantify several aspects, such as the quantum resources required to break common cryptographic schemes, as well as the performance of the most well-known PQC algorithms. We also discuss the resistance of different PQC classes to quantum attacks and the status of PQC implementations in different programming languages. Finally, we present benchmark results on KEMs and signature algorithms to help select the appropriate algorithm for a specific application based on criteria such as algorithm performance, data lifetime, and level of data sensitivity.

0.12

Quantum-Ready Secure WAN: A Risk Assessment and Migration Framework

cs.CR cs.NI ·2026-08-11 ·Saeed Alam
similarity 0.66
Abstract · post-quantum cryptography; quantum risk; enterprise WAN; cryptographic migration; cryptographic agility; ML-KEM; IPsec; TLS 1.3

Enterprise wide-area networks (WANs) use quantum-vulnerable public-key cryptography to authenticate peers and establish keys for Internet Protocol Security (IPsec), Transport Layer Security (TLS), and software-defined WAN services. Harvest-now, decrypt-later collection already threatens data whose protection lifetime may exceed the time needed to migrate, while a future cryptographically relevant quantum computer would also endanger certificates and other authentication dependencies. Post-quantum standards and government directives now define algorithms and transition milestones, but they do not tell an enterprise which WAN services to migrate first or what evidence is sufficient for deployment. This paper proposes a vendor-neutral framework that separates exposure priority, migration readiness, and evidence confidence, and maps those outputs to staged security, operational, and governance gates. It also defines a complete evaluation design for classical and ML-KEM hybrid key establishment in TLS 1.3 and IKEv2/IPsec. The retained artifact is narrower: it contains author-reported aggregate TLS p50, p95, and p99 latencies at configured loss settings of 0%, 1%, 3%, and 5%, an arithmetic checker, and limited environment and MTU/MSS notes. At those settings, the TLS-H minus TLS-C p95 differences are 0.00, 0.16, 0.38, and 0.63 ms, corresponding to 0.00%, 1.32%, 3.07%, and 5.00% relative to TLS-C. These values are descriptive aggregate observations, not inferential results, because per-trial data, sample counts, original captures, and timestamped logs were not retained. Protocol-size and MTU/MSS calculations are reported separately from measured behavior, and unsupported IKE, resource, throughput, retransmission, and downgrade outcomes are excluded.

0.04

Hybrid QKD-PQC Network Emulation through Automated and Scalable Cloud-Native Orchestration

cs.NI cs.CR ·2026-09-28 ·Iván Melijosa, Javier Pérez, Borja Nogales, Iván Vidal, Francisco Valera
code/data similarity 0.66
Abstract

The ongoing transition toward quantum-safe networking has motivated the development of hybrid network architectures integrating Quantum Key Distribution (QKD) and Post-Quantum Cryptography (PQC). However, the experimental evaluation of hybrid QKD-PQC network architectures remains constrained by the high cost and limited accessibility of quantum hardware, as well as by the limited support for hybrid QKD-PQC networks in existing emulation platforms. Quditto is an open-source emulation platform originally designed for QKD networks that enables cost-effective and reproducible experimentation without requiring dedicated physical quantum infrastructure. Building on this foundation, this work presents Quditto as a hybrid QKD-PQC network emulation platform featuring automated and scalable cloud-native orchestration. The proposed platform introduces four principal contributions: a cloud-native orchestrator enabling fully automated infrastructure deployment across cloud and multi-cluster environments; an optimized provisioning workflow enabling large-scale quantum-safe network emulation; native integration of post-quantum nodes enabling unified emulation of hybrid QKD-PQC networks; and a secure key management module providing persistent and access-controlled storage of cryptographic material. Experimental validation demonstrates sublinear orchestration-time scaling with network size and successful end-to-end hybrid QKD-PQC key establishment on a representative spine-leaf deployment, thereby enabling the systematic evaluation of quantum-safe networking mechanisms in large-scale heterogeneous network environments.

0.19