CS Paper Radar

Energy Consumption of Post-Quantum Cryptography on Constrained and General-Purpose Architectures

Olivier Gillot, William J. Buchanan, Madjid G. Tehrani

cs.CR ·submitted 2026-10-19 18:11 UTC · v2
published

Abstract

With Q-day approaching, the transition to post-quantum cryptography (PQC) has begun, with governments across the US, UK and EU mandating migration to quantum-resistant standards. This paper benchmarks the three NIST-standardised PQC algorithms - FIPS 203 (ML-KEM), FIPS 204 (ML-DSA) and FIPS 205 (SLH-DSA) - across key generation, signing and verification operations, measuring both computational performance and energy consumption on a range of constrained IoT-class devices, from the 32-bit Raspberry Pi 1 and Zero to the 64-bit Raspberry Pi 4, as well as commodity laptop hardware. Using the FNIRSI FNB58 USB power meter and OpenSSL~3.5, results show that ML-KEM and ML-DSA achieve energy and speed efficiency comparable to classical elliptic-curve cryptography across all tested architectures. However, SLH-DSA signing is inadvisable on constrained hardware: energy costs for SLH-DSA signing on 32-bit devices were up to 243\% higher than on equivalent 64-bit hardware, making it impractical for resource-limited IoT deployments. These findings have direct implications for IoT security practitioners planning PQC migration.

Journal ref
Gillot, O., Buchanan, W. J., & Tehrani, M. G. (2026). Energy Consumption of Post-Quantum Cryptography on Constrained and General-Purpose Architectures. Cryptography, 10(4), 55
DOI
10.3390/cryptography10040055

Closest papers

Nearest neighbours by meaning across the whole index.

Testing TLS 1.3 PQC on constrained devices and microcontrollers

cs.CR ·2026-10-20 ·Olivier Gillot, William J. Buchanan, Callum Turino
benchmark similarity 0.76
Abstract · 8 pages, 2 figures, 5 tables. Accepted at QSIoT 2026 (Workshop on Quantum-Safe and Intelligent Security for IoT and Cyber-Physical Systems, …

The UK, EU and US governments have set timelines for post-quantum cryptography migration of critical systems, with deadlines ranging from 2028 to 2035. This paper focuses on IoT-class devices and microcontrollers and the viability of using PQC to connect these devices in secure TLS 1.3 connections. Using wolfSSL, we benchmark a 36-combination TLS 1.3 algorithm matrix, pairing ML-KEM-512/768/1024 and X25519/ECC P-256 key exchange with ML-DSA-44/65/87, Ed25519, ECDSA, and RSA-PSS authentication, across four devices (Raspberry Pi Pico W & Pico 2 W, ESP32, and a Raspberry Pi Zero), measuring both handshake latency and energy consumption. We found that in capable devices, all choices in the TLS matrix gave similar results, but that in IoT-class devices, PQC performance is highly implementation- and architecture-dependent: the common assumption that elliptic-curve key exchange must be cheaper than post-quantum lattice-based key exchange does not hold in this wolfSSL-based implementation, where the best full-PQC combination (ML-KEM-512 + ML-DSA-44) completes TLS handshakes 41% faster than the equivalent classical-modern pairing (X25519 + RSA-PSS) on the Pico W (up to 2.12x as energy-efficient, depending on the paired authentication algorithm), and 8.9x faster on the ESP32. Full-PQC, ML-KEM-512/ML-DSA-44, is not only possible but energy-competitive with or superior to Hybrid or Elliptic Curve alternatives on the most constrained devices, though ML-DSA's variable signing time means applications with strict latency-predictability budgets must accept this variance as the cost of full quantum-safe authentication. We further show that the IETF's draft-specified X25519+ML-KEM-768 hybrid incurs approximately the combined cost of its two components, rather than offering a performance compromise, making pure ML-KEM the more practical choice on hardware lacking Curve25519 assembly support.

0.25

Post-Quantum Authentication of IoT Data on Ethereum: Signatures, the Calldata Floor, and Device-Signed Merkle Roots

cs.DC ·2026-11-05 ·Ming-Fong Sie
code/data similarity 0.71
Abstract · 19 pages, 4 figures. Code and data: https://doi.org/10.5281/zenodo.23970176

Field devices deployed today will still be producing records when quantum computers may break their signatures, so systems that anchor IoT data on blockchains need a post-quantum (PQ) authentication path now. We measure its cost on Ethereum under the current execution rules, including the EIP-7623 calldata floor and the EIP-7825 transaction cap, and under the calldata repricing scheduled for the Glamsterdam upgrade. We combine device-side measurements of ML-DSA, Falcon, SLH-DSA, LMS and XMSS, reproduced costs of open-source Solidity verifiers, a new standard-compliant LMS/HSS verifier for SHA-256 and SHA-256/192, and complete transactions on an Osaka-rule EVM, priced with today's verifiers and with proposed precompiles. Three results stand out. Signing every record costs 8.7 times as much as ECDSA even with an ML-DSA precompile, because the calldata floor rather than verification sets the price. When each device signs a Merkle root over 100 records, a standard LMS verifier available today costs about 3,350 gas per record, against 245 gas for ECDSA in the same design, and it is unaffected by the scheduled repricing, which raises floor-bound designs by up to 1.9 times. With the proposed precompiles, ML-DSA-44 costs 1,031 gas per record, and a hybrid ECDSA and ML-DSA signature adds only 2.5%. Post-quantum device authentication is therefore deployable on Ethereum without protocol changes, provided that the latency of batching and the data-availability properties of the chosen variant fit the application.

0.36

Brief introduction to post-quantum cryptography in industrial applications

cs.CR ·2026-11-09 ·Mateusz Żarski, Jarosław Miszczak, Ilias Cherkaoui, Cédric Crettaz, Indrakshi Dey +7 more
surveybenchmark similarity 0.69
Abstract

The development of Post-Quantum Cryptography (PQC) is directly motivated by the necessity to secure information in the face of the quantum threat. This paper provides an overview of recent developments relevant to PQC adoption across several industrial applications, including IoT, healthcare, civil and infrastructure engineering, and defense. We present a brief, self-contained overview of PQC and its market positioning. We perform implementation experiments on selected quantum-safe methods and quantify several aspects, such as the quantum resources required to break common cryptographic schemes, as well as the performance of the most well-known PQC algorithms. We also discuss the resistance of different PQC classes to quantum attacks and the status of PQC implementations in different programming languages. Finally, we present benchmark results on KEMs and signature algorithms to help select the appropriate algorithm for a specific application based on criteria such as algorithm performance, data lifetime, and level of data sensitivity.

0.12

Peregrino: A Full-Hardware Accelerator for the Complete Falcon Post-Quantum Digital Signature Scheme on Resource-Constrained Edge Devices

cs.CR cs.AR ·2026-09-25 ·Antonio Carreño, Jaime Señor, Jorge Portilla
similarity 0.69
Abstract

The arrival of quantum computers threatens the security guarantees of classical cryptography, since quantum algorithms can break schemes that remain secure against conventional attacks. The National Institute of Standards and Technology (NIST) has therefore standardized a set of post-quantum cryptographic algorithms, among them Falcon, a lattice-based digital signature scheme with the most compact signature and public-key sizes of the standardized candidates. Falcon's reliance on floating-point arithmetic makes it hard to implement in hardware, and prior work offers only partial accelerators for specific operations such as signature generation or verification, or a single full implementation generated through high-level synthesis (HLS). This work presents Peregrino, the first hardware accelerator of the complete Falcon digital signature scheme designed from scratch in HDL, targeting resource-constrained edge devices without a native floating-point unit through an emulated floating-point datapath. Implemented on a single Artix 7 XC7A200T FPGA, Peregrino uses 85261 LUTs, 41382 FFs, 44 BRAMs, and 142 DSPs for the Falcon-1024 variant. Against the only prior full implementation, the HLS-based FalconTakesOff, it uses 1,9$\times$ fewer LUTs, 3,4$\times$ fewer FFs, 2,7$\times$ fewer BRAMs, and 9,9$\times$ fewer DSPs, fitting the entire scheme on one FPGA where the HLS design requires at least two. Operating as a peripheral of an on-chip MicroBlaze soft-core, the accelerator additionally reduces key-pair generation, signature generation, and signature verification clock cycles by 92\%, 96\%, and 85\% over the emulated floating-point reference software.

0.23

Benchmarking Post-Quantum Cryptography in Lightweight Virtualization Environments on Embedded Hardware

cs.CR ·2026-09-20 ·Nikolai Puch, Chi Hieu Ta, Moritz Beckel
benchmark similarity 0.69
Abstract

Post-Quantum Cryptography (PQC) is being deployed while embedded systems increasingly adopt lightweight virtualization for workload isolation and security. Both trends change performance characteristics, yet their interaction is not well understood. To address this, we present a measurement study of PQC primitives on embedded-class ARM hardware under three execution environments with a shared software stack: native execution, a Docker container, and a Unikraft unikernel running under QEMU. We benchmark five signature and five key encapsulation mechanism families, and, for comparison, two classical algorithms each. We evaluate them using different parameter sets for a total of around 70 configurations, measuring execution time, memory, and energy per operation. To better gauge the impact on applications, we evaluated TLS 1.3 cipher combinations. We find that container overhead is negligible for primitive computation, whereas unikernel overhead depends on the algorithm. For most PQC families the overhead is negligible. A moderate overhead (1.28-1.53) arises in BIKE, HQC, and MAYO, and, above all, in Falcon signing (17.8-19.2). Per-operation energy closely tracks execution time in all environments. For TLS handshakes, container and unikernel clients need more time and energy per handshake, while all three environments converge once expensive post-quantum algorithms dominate the handshake. In these cases algorithm choice affects per-handshake energy by up to three orders of magnitude, far outweighing the environment. Overall, virtualization cost is inversely related to cryptographic cost: environment choice matters most for computationally cheap, standardized algorithms, while for expensive schemes, algorithm choice alone dominates performance.

0.17

A Non-Invasive Cloud-Based Migration Strategy for Post-Quantum Cybersecurity in Smart HVAC Systems: Architecture, Implementation, and Empirical Evaluation

cs.CR cs.AIeess.SY ·2026-08-19 ·Mahedee Zaman Moon, Kaysarul Anas Apurba, Md Hasibul Hasan, Sk Md Mizanur Rahman
similarity 0.69
Abstract · 27 pages, 12 figures (3 architecture diagrams, 9 experimental plots), 6 tables. Preprint; work in progress. Presents a non-invasive post-qua…

Legacy smart HVAC controllers rely on vendor-cloud TLS secured by ECDH and RSA, both broken by Shor's algorithm, and typical 10-15 year lifespans mean today's devices remain in service through the quantum-threat era. Direct on-device post-quantum cryptography is infeasible: an ESP32-S3, representative of capable HVAC hardware, has only 339 KB free heap against the 900 KB ML-KEM-768 requires, and even classical ECDH-P256 keygen (111.93 ms) dwarfs hardware AES-128 (0.032 ms). We propose a non-invasive PQC proxy, requiring no device, firmware, or vendor-cloud changes, performing ML-KEM-768 encapsulation and ML-DSA-65 authentication (NIST FIPS 203/204) with AES-256-GCM session keys via HKDF, implemented with Open Quantum Safe liboqs on a Raspberry Pi 4B gateway. Over 500 runs, the post-quantum handshake (Steps 1-6) completes in 2.48 ms, 0.38 ms slower than classical baseline, with PQC computation around 8% of handshake time at 20 ms simulated round-trip network latency. The gateway sustains 443 sessions/second, 100% success under 32 concurrent connections, extrapolating to 3546 sessions/second on a 32-core cloud instance. Five side-channel tests, including verified in-place session-key zeroization and a fixed-vs-random TVLA timing analysis, found no exploitable timing leakage or susceptibility to man-in-the-middle attacks. The architecture is vendor-agnostic and becomes unnecessary once vendors adopt NIST PQC natively.

0.16

The use of post-quantum cryptography in the automotive context

cs.CR cs.DC ·2026-10-28 ·Mariana do Carmo Barata Gonçalves, Valderi Reis Quietinho Leithardt
similarity 0.65
Abstract · 24 pages

This study comparatively evaluates post-quantum cryptography (PQC) in automotive communication scenarios, considering the threat posed by quantum algorithms such as Shor's and Grover's algorithms. The simulations use OMNeT++, Veins, INET, and SUMO on two hardware platforms and examine ML-KEM/CRYSTALS-Kyber, ML-DSA/CRYSTALS-Dilithium, and FALCON. ML-KEM and ML-DSA are finalized NIST standards, whereas FALCON is a NIST-selected candidate pending final standardization. The evaluation considers a rural V2V scenario and an urban V2X scenario supported by a roadside unit. Kyber exhibits low {key encapsulation mechanism (KEM)}\color{black} operation latency, Dilithium provides balanced signature performance, and FALCON has high key-generation and signing costs but efficient verification. The results are interpreted as a comparative assessment among the evaluated PQC schemes under the reported simulation conditions; {a conventional ECDSA/ECDH baseline measured in the same simulation setup is also reported for reference.}\color{black} The resulting dataset can support future studies of cryptographic selection in automotive systems.

0.19

PQC Migration: End-to-End Performance Profiling of Post Quantum Cryptographic Algorithms in mTLS

cs.CR ·2026-11-16 ·Rahul, Manjesh K. Hanawal, Sameer G. Kulkarni, Saravanan V, K. Tirumaleswar Reddy
similarity 0.65
Abstract

Emerging quantum computers threaten to break the classical key exchange algorithms. To safeguard against these threats, migration to new quantum-safe algorithms is underway and expected to be expedited. Though resistant to attacks, the quantum safe algorithms may impact the real-world performance due to their large key lengths. In this work, we analyze the end-to-end performance of the Transport Layer Security (TLS) protocol with the post-quantum (PQ) and hybrid cryptographic algorithms standardized by NIST. We develop a test setup to evaluate the performance of TLS connections between a client and a server under various network conditions. We focus on the impact of the new algorithms on the speed (throughput, connection time) and sustainability (energy, CPU cycles) of TLS 1.3. Our analysis demonstrates that the standardized post-quantum algorithms do not introduce any measurable performance degradations in TLS 1.3, despite their larger key lengths. However, hybrid algorithms introduce noticeable performance degradation, which becomes increasingly pronounced under adverse network conditions. Our analysis suggests that migration to hybrid algorithms should be ``network condition aware'' as poor network conditions can severely degrade performance in TLS 1.3. We provide anonymised link to the code and a web interface to analyse performance of various combination of algorithms.

0.10