CS Paper Radar

Testing TLS 1.3 PQC on constrained devices and microcontrollers

Olivier Gillot, William J. Buchanan, Callum Turino

cs.CR ·submitted 2026-10-20 07:29 UTC · v1
benchmark

Abstract

The UK, EU and US governments have set timelines for post-quantum cryptography migration of critical systems, with deadlines ranging from 2028 to 2035. This paper focuses on IoT-class devices and microcontrollers and the viability of using PQC to connect these devices in secure TLS 1.3 connections. Using wolfSSL, we benchmark a 36-combination TLS 1.3 algorithm matrix, pairing ML-KEM-512/768/1024 and X25519/ECC P-256 key exchange with ML-DSA-44/65/87, Ed25519, ECDSA, and RSA-PSS authentication, across four devices (Raspberry Pi Pico W & Pico 2 W, ESP32, and a Raspberry Pi Zero), measuring both handshake latency and energy consumption. We found that in capable devices, all choices in the TLS matrix gave similar results, but that in IoT-class devices, PQC performance is highly implementation- and architecture-dependent: the common assumption that elliptic-curve key exchange must be cheaper than post-quantum lattice-based key exchange does not hold in this wolfSSL-based implementation, where the best full-PQC combination (ML-KEM-512 + ML-DSA-44) completes TLS handshakes 41% faster than the equivalent classical-modern pairing (X25519 + RSA-PSS) on the Pico W (up to 2.12x as energy-efficient, depending on the paired authentication algorithm), and 8.9x faster on the ESP32. Full-PQC, ML-KEM-512/ML-DSA-44, is not only possible but energy-competitive with or superior to Hybrid or Elliptic Curve alternatives on the most constrained devices, though ML-DSA's variable signing time means applications with strict latency-predictability budgets must accept this variance as the cost of full quantum-safe authentication. We further show that the IETF's draft-specified X25519+ML-KEM-768 hybrid incurs approximately the combined cost of its two components, rather than offering a performance compromise, making pure ML-KEM the more practical choice on hardware lacking Curve25519 assembly support.

Comment
8 pages, 2 figures, 5 tables. Accepted at QSIoT 2026 (Workshop on Quantum-Safe and Intelligent Security for IoT and Cyber-Physical Systems, co-located with IoT 2026, Newcastle upon Tyne, UK)

Closest papers

Nearest neighbours by meaning across the whole index.

Energy Consumption of Post-Quantum Cryptography on Constrained and General-Purpose Architectures

cs.CR ·2026-10-19 ·Olivier Gillot, William J. Buchanan, Madjid G. Tehrani
published similarity 0.76
Abstract

With Q-day approaching, the transition to post-quantum cryptography (PQC) has begun, with governments across the US, UK and EU mandating migration to quantum-resistant standards. This paper benchmarks the three NIST-standardised PQC algorithms - FIPS 203 (ML-KEM), FIPS 204 (ML-DSA) and FIPS 205 (SLH-DSA) - across key generation, signing and verification operations, measuring both computational performance and energy consumption on a range of constrained IoT-class devices, from the 32-bit Raspberry Pi 1 and Zero to the 64-bit Raspberry Pi 4, as well as commodity laptop hardware. Using the FNIRSI FNB58 USB power meter and OpenSSL~3.5, results show that ML-KEM and ML-DSA achieve energy and speed efficiency comparable to classical elliptic-curve cryptography across all tested architectures. However, SLH-DSA signing is inadvisable on constrained hardware: energy costs for SLH-DSA signing on 32-bit devices were up to 243\% higher than on equivalent 64-bit hardware, making it impractical for resource-limited IoT deployments. These findings have direct implications for IoT security practitioners planning PQC migration.

0.61

PQC Migration: End-to-End Performance Profiling of Post Quantum Cryptographic Algorithms in mTLS

cs.CR ·2026-11-16 ·Rahul, Manjesh K. Hanawal, Sameer G. Kulkarni, Saravanan V, K. Tirumaleswar Reddy
similarity 0.69
Abstract

Emerging quantum computers threaten to break the classical key exchange algorithms. To safeguard against these threats, migration to new quantum-safe algorithms is underway and expected to be expedited. Though resistant to attacks, the quantum safe algorithms may impact the real-world performance due to their large key lengths. In this work, we analyze the end-to-end performance of the Transport Layer Security (TLS) protocol with the post-quantum (PQ) and hybrid cryptographic algorithms standardized by NIST. We develop a test setup to evaluate the performance of TLS connections between a client and a server under various network conditions. We focus on the impact of the new algorithms on the speed (throughput, connection time) and sustainability (energy, CPU cycles) of TLS 1.3. Our analysis demonstrates that the standardized post-quantum algorithms do not introduce any measurable performance degradations in TLS 1.3, despite their larger key lengths. However, hybrid algorithms introduce noticeable performance degradation, which becomes increasingly pronounced under adverse network conditions. Our analysis suggests that migration to hybrid algorithms should be ``network condition aware'' as poor network conditions can severely degrade performance in TLS 1.3. We provide anonymised link to the code and a web interface to analyse performance of various combination of algorithms.

0.10

A Non-Invasive Cloud-Based Migration Strategy for Post-Quantum Cybersecurity in Smart HVAC Systems: Architecture, Implementation, and Empirical Evaluation

cs.CR cs.AIeess.SY ·2026-08-19 ·Mahedee Zaman Moon, Kaysarul Anas Apurba, Md Hasibul Hasan, Sk Md Mizanur Rahman
similarity 0.68
Abstract · 27 pages, 12 figures (3 architecture diagrams, 9 experimental plots), 6 tables. Preprint; work in progress. Presents a non-invasive post-qua…

Legacy smart HVAC controllers rely on vendor-cloud TLS secured by ECDH and RSA, both broken by Shor's algorithm, and typical 10-15 year lifespans mean today's devices remain in service through the quantum-threat era. Direct on-device post-quantum cryptography is infeasible: an ESP32-S3, representative of capable HVAC hardware, has only 339 KB free heap against the 900 KB ML-KEM-768 requires, and even classical ECDH-P256 keygen (111.93 ms) dwarfs hardware AES-128 (0.032 ms). We propose a non-invasive PQC proxy, requiring no device, firmware, or vendor-cloud changes, performing ML-KEM-768 encapsulation and ML-DSA-65 authentication (NIST FIPS 203/204) with AES-256-GCM session keys via HKDF, implemented with Open Quantum Safe liboqs on a Raspberry Pi 4B gateway. Over 500 runs, the post-quantum handshake (Steps 1-6) completes in 2.48 ms, 0.38 ms slower than classical baseline, with PQC computation around 8% of handshake time at 20 ms simulated round-trip network latency. The gateway sustains 443 sessions/second, 100% success under 32 concurrent connections, extrapolating to 3546 sessions/second on a 32-core cloud instance. Five side-channel tests, including verified in-place session-key zeroization and a fixed-vs-random TVLA timing analysis, found no exploitable timing leakage or susceptibility to man-in-the-middle attacks. The architecture is vendor-agnostic and becomes unnecessary once vendors adopt NIST PQC natively.

0.16

Post-Quantum Authentication of IoT Data on Ethereum: Signatures, the Calldata Floor, and Device-Signed Merkle Roots

cs.DC ·2026-11-05 ·Ming-Fong Sie
code/data similarity 0.63
Abstract · 19 pages, 4 figures. Code and data: https://doi.org/10.5281/zenodo.23970176

Field devices deployed today will still be producing records when quantum computers may break their signatures, so systems that anchor IoT data on blockchains need a post-quantum (PQ) authentication path now. We measure its cost on Ethereum under the current execution rules, including the EIP-7623 calldata floor and the EIP-7825 transaction cap, and under the calldata repricing scheduled for the Glamsterdam upgrade. We combine device-side measurements of ML-DSA, Falcon, SLH-DSA, LMS and XMSS, reproduced costs of open-source Solidity verifiers, a new standard-compliant LMS/HSS verifier for SHA-256 and SHA-256/192, and complete transactions on an Osaka-rule EVM, priced with today's verifiers and with proposed precompiles. Three results stand out. Signing every record costs 8.7 times as much as ECDSA even with an ML-DSA precompile, because the calldata floor rather than verification sets the price. When each device signs a Merkle root over 100 records, a standard LMS verifier available today costs about 3,350 gas per record, against 245 gas for ECDSA in the same design, and it is unaffected by the scheduled repricing, which raises floor-bound designs by up to 1.9 times. With the proposed precompiles, ML-DSA-44 costs 1,031 gas per record, and a hybrid ECDSA and ML-DSA signature adds only 2.5%. Post-quantum device authentication is therefore deployable on Ethereum without protocol changes, provided that the latency of batching and the data-availability properties of the chosen variant fit the application.

0.36

HPQ-AKE: A Provably Secure Sign-Less Hybrid Authenticated Key Exchange Protocol for Bandwidth-Constrained IoT and Edge Networks

cs.CR cs.NI ·2026-10-08 ·Khiem Pham-Tuan, Minh Quang Le, Khuong Nguyen-An
published similarity 0.63
Abstract · Accepted for publication in High-Confidence Computing (Elsevier), October 2026. Author-accepted manuscript. Updated camera-ready version wit…

Securing bandwidth-constrained Internet of Things (IoT) and edge networks during post-quantum migration creates an authentication trade-off: ML-KEM provides post-quantum key establishment, whereas post-quantum signatures increase certificate-chain size, verification cost, and handshake latency. We present HPQ-AKE, a sign-less hybrid authenticated key exchange for RSA-enabled IoT gateways and edge/cloud services that replaces transcript signatures with dual KEMs. HPQ-AKE combines ML-KEM-768 for post-quantum session secrecy and forward secrecy with RSA-OAEP for implicit mutual authentication, preserving existing RSA-enabled infrastructure during migration. We analyze HPQ-AKE in an extended Bellare-Rogaway model, separating classical authentication in the Random Oracle Model from session-key secrecy in the Quantum Random Oracle Model. Under the Module-LWE and RSA assumptions, it establishes AKE security, forward secrecy, and conditional KCI resistance under the long-term-key-only exposure assumptions. Evaluation combines x86 micro-benchmarking, analytical latency modeling, and 10,000-iteration Monte Carlo simulation. HPQ-AKE reduces modeled handshake transmission from 13,009 to 5,668 Bytes, a 56.4% reduction relative to a Hybrid TLS 1.3 Full handshake, while requiring 7.11 ms of total local computation on the measured x86 testbed. Under a simulated 50 kbps satellite-like link with 600 ms RTT and stochastic jitter, median latency is 1,914 ms, 31.4% below the 2,791 ms baseline. At 20 ms RTT, modeled break-even thresholds are 0.31 Mbps against the pre-cached baseline and 4.08 Mbps against the full baseline; both decrease as RTT increases. These x86-based results motivate evaluation on gateway-class IoT and edge platforms; performance on ARM gateways and unaccelerated microcontrollers remains unvalidated.

0.31

A Throughput-Oriented Analytical Model for Post-Quantum Security Protocols

cs.CR cs.ETcs.NIcs.PF+1 ·2026-08-14 ·Ignazio Pedone, Stefano Pirandola
theory similarity 0.62
Abstract · 13 pages. 8 figures

Growing awareness of the impact of quantum threat on classical cryptography directly translates into a growing demand for accurate network simulation tools capable of estimating the integration effects of quantum-safe cryptography in current systems. In particular, the adoption of Post-Quantum Cryptography (PQC) has a direct impact on the performance of network endpoints and transmission overhead. This also affects the scalability of widely adopted security protocols such as TLS and SSH. In this paper, we present a throughput-oriented analytical model that provides a tight upper bound on the maximum sustainable rate of post-quantum secure connection establishment in TLS and SSH. This model takes into account both endpoint and network capacity constraints, decomposing the handshake process into dominant cryptographic operation time and network transmission time. Identifying the bottleneck allows us to derive the achievable throughput in terms of handshakes per second. The experimental results provided show the accuracy of the model against the data obtained from an experimental testbed using, among others, NIST standard primitives from FIPS 203, 204, and 205, including ML-KEM and ML-DSA. Finally, we integrate our model into a network environment and demonstrate how it can be leveraged to enable efficient resource allocation among multiple endpoints, optimizing PQC traffic in multiple-unicast scenarios.

0.10

Benchmarking Post-Quantum Cryptography in Lightweight Virtualization Environments on Embedded Hardware

cs.CR ·2026-09-20 ·Nikolai Puch, Chi Hieu Ta, Moritz Beckel
benchmark similarity 0.60
Abstract

Post-Quantum Cryptography (PQC) is being deployed while embedded systems increasingly adopt lightweight virtualization for workload isolation and security. Both trends change performance characteristics, yet their interaction is not well understood. To address this, we present a measurement study of PQC primitives on embedded-class ARM hardware under three execution environments with a shared software stack: native execution, a Docker container, and a Unikraft unikernel running under QEMU. We benchmark five signature and five key encapsulation mechanism families, and, for comparison, two classical algorithms each. We evaluate them using different parameter sets for a total of around 70 configurations, measuring execution time, memory, and energy per operation. To better gauge the impact on applications, we evaluated TLS 1.3 cipher combinations. We find that container overhead is negligible for primitive computation, whereas unikernel overhead depends on the algorithm. For most PQC families the overhead is negligible. A moderate overhead (1.28-1.53) arises in BIKE, HQC, and MAYO, and, above all, in Falcon signing (17.8-19.2). Per-operation energy closely tracks execution time in all environments. For TLS handshakes, container and unikernel clients need more time and energy per handshake, while all three environments converge once expensive post-quantum algorithms dominate the handshake. In these cases algorithm choice affects per-handshake energy by up to three orders of magnitude, far outweighing the environment. Overall, virtualization cost is inversely related to cryptographic cost: environment choice matters most for computationally cheap, standardized algorithms, while for expensive schemes, algorithm choice alone dominates performance.

0.17

OVS Meets PQ-TLS: Exploring Post-Quantum TLS for SDN's Southbound API

cs.NI ·2026-08-17 ·Majd Latah, Kubra Kalkan
similarity 0.60
Abstract

Software-defined networking (SDN) is a novel networking paradigm that enables network programmability and centralized control for network devices. The southbound application programming interface (API) is used to control and manage the underlying data plane devices. The existing southbound API relies on TLS with legacy cryptographic algorithms such as RSA and ECDSA. In this paper, we explore the performance of the southbound API with postquantum TLS (PQ-TLS) support. We present a proof-of-concept of using PQ-TLS in SDN's southbound API. We study the performance of pure and hybrid PQ-TLS modes across different security levels and compare them with legacy TLS in terms of latency and CPU utilization. We also compare the performance of different post-quantum signature and key establishment schemes.

0.23