CS Paper Radar

Learning a Speed-adaptive Hip Exoskeleton Control Policy Via Sim-to-real Reinforcement Learning

Bin Li, Zhimin Hou, Jiacheng Hou, Zenian Liang, Tong Wu, Teng Ma, Chenglong Fu

cs.RO ·submitted 2026-09-23 12:53 UTC · v1

Abstract

Providing personalized exoskeleton assistance across varying walking speeds remains challenging. Existing online optimization methods are sample-inefficient, requiring extensive human-in-the-loop (HIL) evaluations to optimize the entire assistive torque profile. Sim-to-real reinforcement learning (RL) offers a promising alternative but cannot directly account for individual user preferences. We propose a framework integrating sim-to-real RL with online preference learning for personalized exoskeleton assistance. Specifically, assistance timing is learned in simulation by training RL policies with human musculoskeletal models across varying walking speeds. The learned policies are then distilled and deployed on a physical hip exoskeleton using onboard sensory observations. Gaussian-process-based preference learning further personalizes the assistance magnitude through pairwise user comparisons. By decoupling assistance timing learning in simulation from magnitude optimization in real-world experiments, our framework substantially reduces the online optimization space. Human-subject experiments demonstrate efficient identification of personalized assistive torque profiles across varying walking speeds with fewer real-world evaluations.

Closest papers

Nearest neighbours by meaning across the whole index.

Personalized Lower-limb Exoskeleton Assistance via Preference-based Bayesian Optimization

cs.RO ·2026-08-10 ·Xiao-Yin Liu, Guotao Li, Weiqun Wang, Zeng-Guang Hou
similarity 0.76
Abstract · 20 pages, 15 figures, https://youtu.be/8X1SFqUU4G4

A significant challenge in exoskeleton robotics is the need to dynamically adapt control profiles to individual motion preferences, thereby ensuring both efficient and comfortable assistance. Currently, since user experience can serve as a comprehensive metric for evaluating the effectiveness of assistance, user preference-based optimization methods have been widely studied for parameter tuning. However, the existing methods rely heavily on extensive human-robot online interactions and suffer from slow optimization speed, which not only induces user fatigue but also compromises optimization effectiveness. Therefore, this paper aims to explore an efficient preference-based optimization framework for personalized exoskeleton assistance that can learn optimal parameters with minimal interaction. We propose a preference-based Bayesian optimization (PbBO) approach that can improve sample efficiency by leveraging knowledge about the sampling distribution of candidate sets. For optimizing six control parameters, PbBO can converge to user-preferred parameters with 90.7% validation accuracy via 20 iterations. Moreover, the hierarchical controller is designed to generate personalized torque for different tasks and achieve interaction torque tracking in real time. The results of treadmill and outdoor experiments demonstrate that the optimized parameters can reduce metabolic rate by 14.5%-15.4%, heart rate by 6.3%-7.6%, and muscle activation by 6.7%-31.5% compared to unassisted walking.

0.56

UniExo: Unified Multi-Skill Policies for Musculoskeletal Locomotion and Co-Adaptive Exoskeleton Control

cs.RO cs.LG ·2026-09-17 ·Yifei Yuan, Jakob Wolf, Ghaith Androwis, Xianlian Zhou
similarity 0.70
Abstract · 9 pages, 8 figures

Daily locomotion encompasses diverse activities and frequent transitions between them, yet most exoskeleton controllers are designed for a single activity or a narrow set of related movements. Changes in activity therefore typically require explicit mode switching and separately tuned or retrained controllers. Simulation-based learning reduces the need for hardware-based tuning but generally retains this limitation. Here we present UniExo, a framework that first constructs a multi-skill musculoskeletal human policy and then jointly trains an exoskeleton control policy with it. Four single-skill imitation experts for walking, turning, running and backward walking are distilled into a single network structured by a skill latent and subsequently fine-tuned through reinforcement learning on transition sequences. The resultant unified human policy achieves a mean tracking success rate of 94.7% on unseen clips of the four skills and exhibits greater robustness to perturbations than its constituent experts. A single hip exoskeleton controller (UniExo) is initialized from hip moment prediction of the human policy and co-adapted with it through multi-agent reinforcement learning across the four skills. This co-adaptation shifts the timing of the assistance torque and raises the fraction of positive work delivered to the hip. When deployed on a custom hip exoskeleton, the controller generalizes across four treadmill speeds in six participants and assists one participant through a continuous route of all four skills and their transitions, without skill labels or explicit mode switching. UniExo thus provides a step towards replacing activity-specific controllers with unified, user-specific controllers that support diverse locomotor activities and the transitions between them.

0.32

Multi-Agent Reinforcement Learning of Co-Adaptive Hip Exoskeleton Control (MARL-Exo) for Metabolic Energy Reduction

cs.RO cs.LG ·2026-10-27 ·Yifei Yuan, Jakob Wolf, Ghaith Androwis, Xianlian Zhou
similarity 0.69
Abstract · 14 pages, 6 figures, including supplementary material

Objective: This study aims to determine whether a hip-exoskeleton policy trained in simulation, by co-adapting with a musculoskeletal human model under a metabolic-energy reward, reduces the metabolic cost of walking in new users without per-user tuning, and how mechanical-power shaping affects the learned assistance. Methods: We developed MARL-Exo, a multi-agent reinforcement learning framework in which a full-body human model (304 muscle actuators; randomized anatomy, gait, and speed) and a bilateral hip-exoskeleton policy are trained concurrently in two stages. The exoskeleton observes only delayed hip kinematics and its past commands; its reward includes muscle metabolic power from a physiologically based energetics model, alone (Metabolic) or with mechanical-power shaping (Metabolic + Power). The Metabolic policy was deployed and tested without retraining in eight healthy adults walking at 1.25 m/s, using indirect calorimetry. Results: In simulation, the Metabolic policy reduced modeled muscle metabolic power by 13.8% relative to no-device walking, versus 8.8% for Metabolic + Power. On hardware, MARL-Exo reduced net metabolic rate by 18.3 $\pm$ 6.6% relative to Passive in all eight participants. Relative to No-Exo, the mean reduction was 7.4 $\pm$ 10.0%; six participants more than offset the 13.1% device-wearing penalty, walking up to 24.2% below their No-Exo cost. Conclusion: A metabolically informed policy co-adapted in simulation transferred to users without per-user tuning and consistently reduced the metabolic cost of walking with the device, while explicit power shaping reduced the simulated benefit. Significance: Unlike per-user human-in-the-loop optimization, this approach yields a single population-level controller and allows assistance objectives to be screened in simulation before human testing.

0.29

A Personalized Dynamic Balance Evaluation Paradigm for Hip Exoskeleton-Assisted Walking under Unexpected Ground Perturbations

cs.RO cs.LGeess.SY ·2026-09-13 ·Yun Chen, Oluwasegun T. Akinniyi, Qiang Zhang
published similarity 0.69
Abstract · 8 pages, 6 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Hip exoskeletons may improve recovery from unexpected gait perturbations, yet personalizing assistance remains difficult because balance is multidimensional and human-in-the-loop experiments are small-sample and noisy. We present a participant-specific composite balance cost that integrates seven biomechanical sub-metrics spanning margin of stability, center-of-mass dynamics, and whole-body angular momentum. The sub-metrics are converted to direction-aligned, dimensionless cost features, and nonnegative fusion weights are learned on the simplex. Coupled with an empirical-Bayes hierarchical model, the learned-composite selector estimates each tested condition's posterior probability of being best, P(best), and a high-probability candidate set with size $K_{0.8}$. The framework was evaluated with three participants walking at 1.1 m/s during unilateral belt-slip perturbations across 46 hip-assistance conditions. In the full-budget analysis (B = 4 repeats per condition), the selector concentrated 80% of the posterior probability within 1 to 5 of 46 conditions, compared with 2 to 12 for equal-weight fusion and 4 to 37 for principal component analysis fusion. This smaller candidate set could shorten personalization experiments and limit participants' exposure to repeated perturbations in future studies. Selected-condition trials showed lower observed composite costs than no-torque trials, with nominal p < 0.05 for P2 and P3. Leave-one-repeat-out refits yielded positive mean held-out rank correlations for all participants and moderate stability of the learned weights and candidate sets. These proof-of-concept results support participant-specific composite balance evaluation for candidate selection in perturbation-based human-in-the-loop experiments.

0.45

ExoLaN: Physics-Consistent Context-Aware Dynamics Learning for Exoskeletons

cs.RO eess.SY ·2026-09-25 ·Lucas Schulze, Maximilian Schwarz, Jona Hoppe, Jan Peters, Oleg Arenz
similarity 0.67
Abstract

Task-agnostic assistive exoskeleton control based on human intention offers greater flexibility than conventional approaches that rely on predefined tasks or motion patterns. Human joint torque estimation enables task-agnostic assistance by characterizing user actions. Physics-consistent methods such as Deep Lagrangian Networks (DeLaN) have been applied to estimate the human torques in multi-user settings, but existing approaches cannot adapt to a specific user without retraining, and do not account for intermittent contacts during locomotion. We propose ExoLaN, a Context-Aware DeLaN for human-exoskeleton interaction that learns the full coupled system dynamics while adapting to changes in interaction context. ExoLaN combines temporal context with partial contact-force measurements from force-sensitive insoles to infer latent dynamics embeddings and estimate generalized contact torques. On seven unseen users performing 21 unseen tasks, ExoLaN reduces torque estimation MSE by 7% compared to a black-box baseline. Beyond inverse dynamics, ExoLaN serves as a unified model that also enables accurate forward prediction: training with a multi-step prediction loss reduces acceleration MSE by 59% and long-horizon position and velocity errors by 60% and 93%, respectively, compared with a single-step loss. Moreover, the learned latent context captures task information without explicit task labels, making it a promising signal for task-aware assistive control.

0.19

Context-Continuous Preference Learning for Exoskeleton Personalization

cs.LG cs.RO ·2026-09-23 ·Sunin Baek, Sungwoo Park, Daekyum Kim
similarity 0.67
Abstract · 23 pages, 11 figures, including supplementary materials

Personalizing exoskeleton assistance across operating conditions is constrained by the time and physical effort required to collect user feedback. We examined whether a user's preference landscape varies smoothly across operating conditions and when this continuity supports learning from limited feedback. We propose Context-Continuous Preference Learning (CCPL), a Gaussian-process preference model that shares observations across nearby contexts while retaining context-specific utility estimates. We evaluated CCPL through simulations and retrospective analyses of ankle and elbow exoskeleton preference data from nine healthy adults. In simulations, CCPL improved reconstruction and preference-based Bayesian optimization relative to independent learning when preferences varied smoothly, but showed negative transfer when continuity was weak. In both human studies, full-data reference landscapes estimated separately for each participant and context tended to be more similar between nearby operating conditions. With five exposures per context, CCPL increased mean reconstruction correlation with these references from 0.644 to 0.720 for ankle assistance and from 0.476 to 0.526 for elbow assistance relative to independent learning. The five-exposure budget was approximately 37% lower for ankle and 17% lower for elbow than the estimated independent-learning budgets needed to match these correlations. CCPL also improved held-out response prediction relative to independent learning, while benefits over pooled learning varied. These findings support context continuity as a basis for sharing preference observations under limited feedback, although benefits for online personalization in humans remain to be established.

0.29

Assistance Torque Estimation via Dynamics-Aware Optimization for Lower-Limb Exoskeleton in Complex Environments

cs.RO ·2026-09-14 ·Xiao-Yin Liu, Guotao Li, Weiqun Wang, Zeng-Guang Hou
similarity 0.67
Abstract · 8 pages, 11 figures, https://youtu.be/CGxDD0jKpak

Ground-truth human joint torque estimation relies on motion capture systems, which suffer from limited outdoor usability and significant deployment expenses. Furthermore, direct scaling of ground-truth joint torques to obtain motor torque commands is not necessarily the optimal strategy. To address the aforementioned limitations, inspired by the human motion generation process, this paper proposes a novel assistance torque estimation method based on the dynamic model. From an optimization perspective, the proposed method directly generates motor-assist torque and lowers the cost of data acquisition. Then, a data-driven assistance torque prediction network is trained to enable accurate real-time prediction under complex outdoor environments. Experimental results demonstrate that optimized (estimated) assistance torque exhibits better phase consistency with gait trajectories and better alignment with task characteristics. Relative to the Zero torque condition, the predicted torque can decrease metabolic rate by 11.8%-17.7%, heart rate by 8.9%-14.3%, and peak muscle activation levels by 28.2%-54.0%, respectively. This provides a new perspective for low-cost adaptive exoskeleton assistance.

0.21

Simultaneous Forward and Inverse Human-in-the-Loop Optimization

cs.RO ·2026-09-18 ·Kyeongwon Park, Steven H. Collins
published similarity 0.66
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026)

Subjective user experience is important to human-robot interaction, but the outcomes users value, and how those preferences vary across individuals and contexts, are often unknown. While inverse learning approaches using human data can help identify user rewards, in many assistive settings the experimental costs of executing a control policy, measuring biomechanical or physiological outcomes, and collecting user feedback often limit the number of queries and optimization iterations. Here, we present Simultaneous Forward and Inverse Human-In-the-Loop Optimization (SFIHILO), which efficiently infers individual-specific reward functions from preferences over human outcomes and identifies a final control policy that maximizes the learned reward. SFIHILO bootstraps a forward model to predict user outcomes from control policies, uses this model for active querying to accelerate inverse reward learning, and then optimizes the final control policy without additional user trials. We score candidate policies by their expected reduction in uncertainty across both forward and inverse beliefs, targeting a regional preference boundary to robustly inform this simultaneous learning process. In simulation, we show that SFIHILO was effective across user heterogeneity, outcome dimensionalities, precision requirements, noise levels, and nonstationarity; compared with mutual information approaches, the proposed active querying strategy significantly improved sample efficiency in inverse learning while preserving forward model accuracy. This approach demonstrates the potential to infer latent human goals, enabling more transferable and effective human-robot interaction.

0.30