CS Paper Radar

Retrainable physics-integrated neural differentiable modeling of sintering across material systems

Zeping Chen, Ani Aprahamian, Khachatur V. Manukyan, Tengfei Luo

cs.LG cond-mat.mtrl-sci ·submitted 2026-09-25 16:56 UTC · v1
unusual

Abstract

Sintering is widely used to manufacture ceramics, but coupled densification and grain growth, material-dependent kinetics, and sparse measurements complicate predictive modeling and process design. We present Sinter-PiNDiff, a retrainable physics-integrated neural differentiable framework for predicting density and grain-size evolution. Two neural networks learn densification and grain-growth coefficients within coupled rate equations, while a smooth saturation factor attenuates densification near theoretical density. The same governing structure, network architecture, and training procedure were fitted independently to published data for MgO, Al-doped ZnO, and CaO-doped ThO2. Tests at held-out temperatures and compositions yielded the lowest mean error in all twelve material-metric comparisons against multilayer perceptron and residual network baselines. For MgO, Al-doped ZnO, and CaO-doped ThO2, respectively, density normalized root-mean-square errors were 14.6%, 10.8%, and 14.4%, and grain-size errors using the same metric were 8.6%, 12.1%, and 19.3%. Removing evolving density from both neural-network inputs increased density and grain-size trajectory errors in all three systems and ten of twelve aggregate errors, supporting density-dependent kinetic feedback. Deep ensembles estimated model disagreement, but empirical coverage showed that the uncertainty bands were not calibrated and did not capture all model-data discrepancies. These results establish Sinter-PiNDiff as a retrainable framework for sparse-data prediction and uncertainty-informed selection of sintering conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

Thermally Conditioned Time-Series Forecasting of Grain Growth in Polycrystalline Materials

cs.LG cond-mat.mtrl-sci ·2026-11-04 ·Eliane Younes, Elie Hachem, Marc Bernacki
similarity 0.61
Abstract

Grain growth during heat treatment strongly affects the microstructure of polycrystalline materials and, consequently, their mechanical properties. Although numerical methods such as front-tracking or front-capturing simulations can accurately describe grain growth, their high computational cost limits their use for long or non-isothermal thermal cycles. In previous work, grain growth was successfully predicted under isothermal conditions by treating grain size distributions as time series and forecasting their evolution using recurrent neural networks, allowing complete grain growth trajectories to be generated in seconds rather than through costly PDE-based simulations. In the present work, this forecasting framework is reformulated to handle non-isothermal conditions by explicitly incorporating thermal information into the model architecture. Grain size distributions are encoded using a convolutional neural network, thermal descriptors are embedded through a dedicated multilayer perceptron, and temporal evolution is predicted using a recurrent network. Instantaneous temperature and thermal rate are provided at each time step, allowing the model to adapt its predictions to changing thermal conditions. The framework is trained and evaluated on datasets generated from validated front-tracking simulations across a wide range of non-isothermal thermal paths. The results show that the thermally conditioned model accurately reproduces grain growth dynamics under complex thermal histories, achieving, in k-fold cross-validation over all simulations, mean relative errors of 2.99% (one-hour cycles) and 4.51% (four-hour cycles) with coefficients of determination exceeding 0.99, and mean relative errors between 1.91% and 14.66% on ten simulations following four unseen thermal histories of increasing complexity.

0.23

Measuring trainable degrees of freedom in materials graph neural networks: a random-subspace intrinsic dimension analysis

cs.AI cond-mat.mtrl-sci ·2026-09-28 ·Shehroz Ahmad Shoaib, Kangming Li
similarity 0.58
Abstract

Final predictive accuracy is the standard basis for comparing graph neural networks (GNNs) in materials-property prediction, but it does not show how strongly performance depends on access to trainable parameter-space directions. Here, we introduce trainable-degree dependence as a complementary characterization of materials GNN learning. Using random-subspace intrinsic-dimension analysis, we train CGCNN, ALIGNN, and DimeNet++ in randomly oriented parameter subspaces across six prediction tasks and measure how performance recovers as independent trainable degrees of freedom are restored. The resulting recovery curves separate endpoint accuracy from the trainable-dimensional demand required to recover it. They reveal distinctions that final errors alone miss: metallic classification and log-bulk-modulus regression recover near-reference performance from small fractional subspaces, formation-energy and band-gap prediction show stronger architecture dependence, and phonon prediction is most sensitive to dimensional restriction. Dataset-size sweeps show that band-gap models require larger fractional subspaces as training data grows, whereas formation-energy and bulk-modulus responses are more stable. A width sweep shows that fractional thresholds can remain stable while absolute threshold dimensions increase with model size. Random-subspace analysis therefore provides a targeted stress test for how materials GNNs use their optimization space.

0.19

Temperature-Dependent Multiphysics Modeling of Additive Friction Stir Deposition Using Multi-Task Coupled Physics-Informed Neural Networks

cs.CE physics.comp-ph ·2026-10-02 ·Dhrubajyoti Gupta, Nikhil Gotawala, Raghav Gnanasambandam, Rohit Kannan, Jian Yu +2 more
benchmark similarity 0.56
Abstract · 14 pages, 12 figures, 7 tables

Additive friction stir deposition (AFSD) involves coupled thermal and material-flow fields governed by frictional heating, plastic deformation, and tool-imposed boundary conditions. High-fidelity finite-volume methods (FVMs) can resolve these fields but are computationally expensive, while constant-property approximations can distort the predicted thermo-mechanical response. This work develops a steady-state multi-task coupled physics-informed neural network (MCoPINN) to predict three-dimensional temperature and material-flow fields while reconstructing temperature-dependent thermal conductivity, density, and specific heat from sparse property measurements. A theoretical analysis decomposes prediction error into property reconstruction and neural field-solver contributions and characterizes the discrepancy associated with constant-property models. A controlled one-dimensional nonlinear-conduction study evaluates property reconstruction under sparse measurements. The framework is then evaluated for AFSD against a temperature-dependent FVM benchmark and experimental thermocouple measurements. MCoPINN reproduces the reference thermal and material-flow fields and reduces average temperature root-mean-square error from 50.13 K for the constant-property CoPINN to 30.28 K across four traverse speeds. MCoPINN requires approximately 8.5 hours of training per condition, compared with 52 hours for the FVM benchmark. These results demonstrate computationally efficient, physics-coupled prediction with temperature-dependent material properties.

0.34

A Hybrid Quantum Neural Network to Analyse Big Experimental Powder X-ray Diffraction Data

cs.LG cond-mat.mtrl-sci ·2026-09-17 ·H. Dong, S. D. M. Jacques, M. Q. Hlatshwayo, E. Papoutsellis, K. Georgopoulos +2 more
similarity 0.54
Abstract

Quantitative analysis of experimental powder X-ray diffraction data remains challenging when evaluating complex multiphase materials and noisy measurements. We introduce a hybrid quantum neural network framework designed to extract quantitative parameters, such as phase weight fractions and scale factors, directly from one-dimensional powder diffraction patterns without iterative refinement. The model combines noise-aware classical simulator pre-training with fast downstream fine-tuning on quantum processing unit features, ensuring stability against hardware decoherence. We demonstrate the practical utility of this approach by deploying the trained network onto an IBM quantum computer to analyse experimental X-ray diffraction computed tomography datasets from a three-phase solid oxide fuel cell containing ca. 10,000 patterns and a four-phase lithium-ion battery containing ca. 20,000 patterns). The network successfully reconstructs quantitative spatial phase maps in strong agreement with classical Rietveld refinement, paving the way for using quantum computing hardware to analyse real-world materials characterisation data.

0.37

A Hierarchical Synergistic Deep Learning Framework Integrating Composition, Structure, and Ionic Transport for Solid-State Electrolyte Discovery

cs.AI cond-mat.mtrl-scics.LG ·2026-08-26 ·Hongwei Du, Dingyang Lv, Baole Wei, Yongheng Li, Feng Yu +3 more
similarity 0.53
Abstract · 22 pages, 8 figures, 1 table

Inorganic solid-state electrolytes must combine high room-temperature ionic conductivity, a wide electrochemical window, excellent electronic insulation, and favorable mechanical compliance. Single models struggle to support reliable multi-objective screening across vast chemical spaces because of training-data distribution mismatch, cross-property dataset heterogeneity, and scarce kinetic transport data. To overcome these limitations, we develop a hierarchical synergistic deep-learning framework that sequentially coordinates efficiency, accuracy, and reliability through four complementary modules. The in-house-developed L-G-DCNN and a multi-fidelity implementation built on DenseGNN serve as compositional and structural experts for thermodynamic coarse screening and multi-property evaluation, respectively; MatterSim and system-specific DeePMD models provide transport pre-assessment and kinetic validation. Systematic benchmarks show that each module outperforms mainstream counterparts in its task, while retrospective validation establishes dual closed-loop verification of module-level accuracy and end-to-end workflow reliability. Applied to 30,364,908 Alex/ICSD-derived candidates, the framework identifies 97 high-performance candidates with room-temperature ionic conductivities of 0.109--59.0 mS/cm, including 94 halides, one borohydride, and two oxides. Consistency with independent experimental data confirms that 76 of the 94 halides fall within reported high-conductivity structural regions. Analysis reveals that Li$^{+}$ jump-network connectivity, rather than the number of geometric Li sites, is the core determinant of room-temperature ionic conductivity. Li-defect engineering effectively enhances oxide transport, whereas the inherent rigidity of the O$^{2-}$ framework suggests a potential upper limit on oxide electrolyte performance.

0.14

Differentiable Hybrid Modelling for Learning and Optimising Chemical Transport Processes from Experimental Data

cs.CE cs.LGmath.NA ·2026-09-03 ·Arthur Jessop, Mohammed Alsubeihi, Ben Moseley, Ashwin Kumar Rajagopalan
similarity 0.53
Abstract

Transport models underpin the design and optimisation of chemical processes, yet their constitutive laws are typically hand-picked, their experimental initial conditions are assumed exact, and their computational cost restricts optimisation to a handful of process variables. Here we introduce a differentiable hybrid modelling framework that embeds neural networks within a GPU-accelerated population balance equation solver to discover constitutive laws and assimilate initial conditions directly from experimental crystallisation data. Using thirteen real experiments with multi-dimensional size and shape measurements, we show that treating measured initial conditions as exact yields a physically inconsistent rate law despite improved predictive accuracy, whereas assimilating them recovers a physically consistent, non-linear law and reduces trajectory error sevenfold relative to conventional modelling. End-to-end differentiability further enables gradient-based optimisation of high-dimensional operating profiles, identifying a 300-variable temperature profile that reduces crystal aspect ratio by 25% at constant mass, facilitating superior product attributes. Our framework augments, rather than replaces, mechanistic modelling, offering a general route to learning transport models from data and optimising processes with them.

0.13

Adapting neural operators for mechanics decisions under changing operating conditions

cs.CE cs.LGmath.NA ·2026-09-27 ·Prashant K. Jha, Koffi Enakoutsa, Ian Galloway, Henry Anderson
similarity 0.51
Abstract · 33 pages, 16 figures

Neural operators can accelerate repeated nonlinear mechanics calculations, but their accuracy can deteriorate as operating conditions move beyond the training range. This work studies whether high-fidelity solutions acquired during use can be reused to adapt a neural operator and improve subsequent mechanics-based command selection. Two hard-magnetic soft-material systems are simulated using high-fidelity finite-element (FE) models, providing reference solutions for evaluating surrogate predictions and selected commands. A neural operator predicts deformation from known material, loading, and magnetic-field inputs, while an empirical error estimator determines which predictions may be used for command selection. Selected FE evaluations supplement these predictions, and their complete loading paths are retained for periodic updates of the neural operator and estimator. In both examples, the fixed operator loses substantial accuracy when stiffness and loading move outside the training range. Updates using 16 acquired paths recover much of the lost accuracy while preserving accuracy in the nominal regime. Under the same FE evaluation budget, the updated operators also improve command selection, although the benefit varies with the operating condition. Error estimation is less consistent, with inaccurate predictions sometimes accepted and accurate predictions rejected. These results demonstrate that reusing high-fidelity loading paths can extend the useful operating range of a neural operator. However, improved forward accuracy alone does not guarantee reliable prediction acceptance, highlighting prediction-specific error assessment as a separate requirement for trustworthy decision making.

0.36

Physics-Informed Neural Networks to Infer the Perpendicular Energy Conductivity in the Scrape-Off Layer of Stellarator Devices

cs.AI physics.plasm-ph ·2026-09-10 ·J. Gallego, P. Protopapas, A. Bustos, A. Alonso, S. Barquero +4 more
similarity 0.51
Abstract · 18 pages, 10 figures

In this work, we develop an inverse Physics-Informed Neural Network (PINN) framework to infer the dependence of the scrape-off layer (SOL) perpendicular heat conductivity on plasma density and temperature, $κ_\perp(n,T)$. The method combines radial profile measurements of electron density and temperature with the residual of a reduced one-dimensional SOL transport equation, so that the inferred conductivity is constrained by both the measurements and the underlying transport model. Three neural networks are trained simultaneously: two reconstruct the temperature and density profiles as functions of the radial coordinate and transported power, while a third represents the effective conductivity as a function of the local density and temperature. The framework is first validated using synthetic data generated from a prescribed conductivity function, allowing the inferred $κ_\perp(n,T)$ to be compared directly with the ground truth. The model recovers the imposed functional dependence with errors below $10~\%$ in the data-constrained region. Bootstrap resampling is shown to provide a practical indicator of prediction reliability and consistency. A scan in the number of plasma profiles used for training and the number of radial measurement positions per profile identifies a practical trade-off between reconstruction accuracy and data availability. Finally, the method is applied to an experimental dataset from the TJ-II stellarator obtained with the helium-beam diagnostic. This exploratory application provides an initial estimate of the effective SOL conductivity and illustrates the potential of inverse PINNs for extracting transport information from plasma edge measurements.

0.29