CS Paper Radar

CP-Agent: A Harness-Engineered Agent for Crystal Plasticity Simulation Workflows

Samuel Onimpa Alfred, Abhishek Kumar, Veera Sundararaghavan

cs.AI cond-mat.mtrl-sci ·submitted 2026-09-25 02:23 UTC · v1
published

Abstract

Crystal plasticity (CP) simulations predict the mechanical behavior of polycrystalline metals, yet their routine use is hindered by the manual effort of configuring heterogeneous tools, orchestrating multi-step data pipelines, and calibrating constitutive parameters against experiments. These bottlenecks impede productivity in systematic parameter studies, motivating interest in automated workflows. This study presents CP-Agent, a harness-engineered LLM-based agent that autonomously executes complete CP modeling workflows from natural-language tasks. Operating under the ReAct paradigm, the agent reasons about tool selection and sequencing while delegating numerical search to established optimizers. The harness comprises a minimal system prompt, typed tool definitions, a dispatcher, and a safety-bounded iteration loop, encoding domain knowledge through tool schemas rather than hard-coded logic. CP-Agent is demonstrated on four case studies: calibrating four slip parameters of additively manufactured stainless steel 316L against tensile data; validating the workflow against published copper benchmarks, reproducing stress-strain and texture evolution; recovering the initial crystallographic texture of copper, where the agent correctly identifies a diffuse initial texture; and reproducing the multi-pass rolling texture evolution of a Mg-Zn-Ca alloy, where the agent chains five deformation passes and recovers the experimentally observed weakened, split basal texture. In all cases, the agent inferred the correct execution sequence from the task statement, robustly across repeated runs, and delivered physically interpretable results. This work establishes harness engineering as a systematic approach to automating CP modeling workflows while maintaining physical interpretability and auditability through visible reasoning traces.

Comment
37 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

AI agents can redesign engineering parts with more than a thousand CAD parameters and nonlinear simulations

cs.AI ·2026-11-19 ·Alexandra Starostina, Alexander Hermann, Mahish Guru, Kartik Bali, Roland Aydin +1 more
similarity 0.70
Abstract

Simulation-driven design of real engineering components has to meet three conditions at once. It runs on few solves, since a nonlinear finite-element simulation of a 3D part takes hours; its design space has many values, the hundreds to thousands of values of the part's CAD model; and a better design often needs a redesign, coordinated changes of the part's proportions rather than local polishing of its surface. Automated optimisers meet at most two of these conditions. Classical optimisers, Bayesian or derivative-free, need a person to cut the design down to a few parameters, and on all the values they need far more solves; industrial shape optimisers move every surface node of the mesh in one solve per cycle, but only in small steps that polish rather than redesign. We ask whether a general-purpose large language model (LLM) can meet all three by joining what it knows with what the simulation shows. GPT-6 Astra edits a magnesium stent through a CAD geometry parametrisation of about 1,650 values, with a budget of 15 simulations; every proposal is built in CAD, meshed and simulated with large-deformation plasticity and contact, and the LLM reads the full results of every solve. Within that budget it lowered the objective, a high percentile of the strains in the stent's bends, by 32%; on the same budget, the industrial shape optimiser Tosca improved the original design by a tenth and then stopped improving. An earlier GPT-6 Astra design, 25% lower in the same objective, was checked in an independent, higher-fidelity model of the full deployment with crimping and damage: it was 14% less strained than the original after the full chain, and its most damaged spot began to fail later and carried 63% less damage at full expansion. LLMs can thus join their learned knowledge with simulation data to adjust more than a thousand design values and reach valid designs with real improvements.

0.26

Mechanical Engineering Skills: An Open Library of Agent Skills for Design, Analysis and Manufacturing

cs.MA ·2026-11-03 ·Achuth Chandrasekhar, Jesse Barkley, Peter Pak, Rumi Loghmani, Aakash Oza +1 more
code/data similarity 0.69
Abstract

Mechanical engineers use specialized tools for CAD, simulation, manufacturing and research, each with a distinct interface and learning curve. We present Mechanical Engineering Skills, an open library of 33 agent skills that makes these capabilities accessible through a single text or voice conversation. Each skill combines operating instructions, executable tools and verification procedures. A language model interprets the request, selects and coordinates skills, while deterministic tools perform computations and return checked results. Default workflows require no tool-specific interface training, local model execution or model fine-tuning; skills load on demand and install with one command. Nineteen skills adapt published or preprint research from our laboratory, including text-to-CAD, linkage synthesis, CFD setup, stress-field and lattice surrogates, equation discovery, additive-manufacturing planning and in-process monitoring. Fourteen additional skills support core engineering and education. We describe the skill format, design principles and a method for translating research into practical workflows. Five case studies with explicit evidence scopes and independent reruns demonstrate exact analytical agreement for lattice homogenization, rocket apogee predictions within 4% of stored OpenRocket references, an equation fit nine times more accurate than a cubic polynomial at an unseen temperature, and an end-to-end rehearsal of porosity monitoring. Controlled agent comparisons remain future work. The open library is available at https://github.com/BaratiLab/mechanical-engineering-skills.

0.26

Evaluating LLM-based AI agents integrated with materials synthesis tools: the case of atomic layer deposition

cs.AI cond-mat.mtrl-sciphysics.app-ph ·2026-08-29 ·Angel Yanguas-Gil
survey similarity 0.64
Abstract · Invited prospective paper submitted to MRS Communications

This work provides an overview of the different strategies that can be used to evaluate the performance of AI models and agents based on large language models (LLMs) for materials synthesis. After providing a brief overview of the key technologies behind the current generation of AI agents based on LLMs, we summarize the different approaches to evaluating these models in the context of materials science and in particular on materials synthesis, with a specific emphasis on scenarios in which the models are directly integrated with experimental tools. We discuss evaluation strategies spanning knowledge and reasoning benchmarks, tool-use benchmarks, and closed loop benchmarks involving the interaction with experimental systems or realistic virtual tools. We use atomic layer deposition (ALD) as a case study, emphasizing how existing approaches in the literature both build from general approaches used beyond materials science and can be generalized to other materials synthesis techniques. Finally, we provide a practical evaluation framework to evaluate LLMs in the context of materials synthesis

0.46

MatOS: An Agent Operating System for Materials Research

cs.AI cond-mat.mtrl-sci ·2026-10-25 ·Dingyang Lyu, Jing Gao, Zhonghao Chang, Jingjie Huang, Xiangran Cheng +11 more
code/data similarity 0.63
Abstract · 54 pages, 21 figures, 11 tables

Materials research relies on scattered and growing data, knowledge, and simulation tools, and a single study often spans multi-day workflows across literature analysis, computation, and experiment. Large language model agents can now retrieve materials data, operate simulation codes, and close design-synthesis-characterization loops with autonomous laboratories. However, extending these agents with new capabilities, keeping long-running tasks on track, and letting them learn from past tasks and user feedback remain difficult. Here we present MatOS, an agent operating system for materials research with three core components: (1) a layered scientific asset graph that organizes data, knowledge, tools, skills, roles, and workflows as reusable assets; (2) a stateful adaptive workflow that runs tasks as explicit execution graphs with scientific checks, so that they can be resumed and traced; and (3) evidence-driven asset evolution, which revises these assets from execution records and user feedback. On ResearchClawBench, MatOS improves on the previously best-performing agent by 11.15% with the same base model and extends the cost-score Pareto frontier. With a common base model, it outperforms Codex CLI and Claude Code, exceeding Codex CLI by 2.13% on MatTools and 4.17% on SciAgentGym. In eight research cases, MatOS narrowed more than 30 million candidate structures to 97 solid-electrolyte candidates, identified 89 halide variants with higher computed conductivity than their parent structures, linked the force errors of 11 pretrained interatomic potentials to local atomic environments, and supported two new methods that reduce errors by 3.1% and 13.6% relative to their baselines. These results show that organizing research capabilities as reusable, evolving assets enables agents to carry out long, multistage materials studies. Code is available at https://github.com/DingyangLyu/MatOS.

0.31

TMCS: Tool-Grounded Multi-Agent Reasoning for Compositional Chemical Problem Solving

cs.AI cs.CV ·2026-09-28 ·Shengqin Wang, Jie Jin, Yu Cheng, Yihang Chen, Weilin Luo +2 more
similarity 0.63
Abstract

Despite the promise of Large Language Models (LLMs) in computational chemistry, rigorous combinatorial chemistry problems remain difficult because they require quantitatively constrained molecular modification, candidate validation, and systematic revision after failed attempts. Existing tool-augmented chemical agents demonstrate useful planning and tool use, but they rarely provide a unified loop for property-driven molecular optimization and workflow-level composition. To bridge this gap, we propose Tool-Grounded Multi-Agent Reasoning for Compositional Chemical Problem Solving (TMCS), a step-by-step multi-agent framework that formalizes chemical problem solving as an interpretable, tool-augmented workflow. At the task level, specialized agents leverage external tools, few-shot trajectory memory, and structured reflection to iteratively refine solutions. At the workflow level, TMCS chains generation, understanding, editing, description, and optimization into a closed-loop pipeline. Evaluations across multiple chemical tasks demonstrate that TMCS consistently enhances chemical reasoning across both open- and closed-source base models, achieving state-of-the-art performance.

0.12

Design-to-Plan: A Large Language Model-Based Multi-Agent Framework for Manufacturing Process Planning from 3D CAD Models and 2D Engineering Drawings

cs.RO cs.AI ·2026-08-25 ·Muhammad Tayyab Khan, Lequn Chen, Wenhe Feng, Seung Ki Moon
benchmark similarity 0.63
Abstract · Submitted to Elsevier Journal

Manufacturing process planning transforms heterogeneous design information into coherent manufacturing decisions. However, existing approaches focus on isolated subtasks, such as feature recognition, drawing interpretation, or tool selection, and struggle to support the full reasoning chain from design artifacts to process plans. This is critical when planning must interpret 3D CAD models, 2D engineering drawings, materials, and domain-specific rules. To address this gap, this paper presents Design-to-Plan, a large language model (LLM)-based multi-agent framework for end-to-end manufacturing process planning. An orchestrator coordinates specialized agents for 3D feature recognition, 2D drawing analysis, 2D-3D context fusion, knowledge retrieval, process sequencing, tool selection, and report generation. Rather than using LLMs as standalone text generators, the framework deploys them as reasoning agents that interact with deterministic modules and knowledge sources to produce consistent and traceable decisions. In this hybrid design, deterministic modules and specialized agents extract structured information from CAD and drawing inputs, while LLM agents perform context-aware reasoning, retrieve manufacturing rules, resolve conflicts, and generate planning outputs. The framework is evaluated using 300 benchmark cases across three downstream ReAct-enabled agents, plus separate evaluations of CAD feature recognition, drawing analysis, and 2D-3D context fusion. The parallel architecture achieves 100% success across downstream agents, Tool F1 scores of 95.9%-97.6%, 90% source detection accuracy in conflict analysis, and a 60%-68% reduction in token usage for key planning tasks. Results show that structured LLM-based multi-agent coordination can bridge design representations and manufacturing knowledge, enabling scalable, efficient, and traceable design-to-plan automation.

0.47

Hypothesis-Driven Autonomous Materials Synthesis with Multimodal LLM Agents

cs.AI cond-mat.mtrl-sci ·2026-09-16 ·Izumi Takahara, Kazunori Nishio, Akira Aiba, Shigeru Kobayashi, Takao Nakajima +2 more
similarity 0.62
Abstract

Self-driving laboratories can explore synthesis conditions autonomously, but their decision-making layer is typically a black-box optimizer, and the output is a set of optimized samples, with the measurements reduced to predefined scalar objectives and the reasons behind success left unarticulated. Here we present SynAgent, a framework in which large language model agents operate an automated experimental system and maintain an explicit, revisable understanding of the synthesis process as the campaign's primary output. Starting with no predefined analysis pipeline, SynAgent adaptively generates analysis skills for newly acquired data and evolves this understanding through multimodal reasoning over experimental data such as X-ray diffraction patterns and electron micrographs. The evolution is guided by a verify-falsify scheme, in which the agent deliberately challenges its own hypotheses by testing conditions predicted to fail as well as those predicted to succeed. In a single campaign of 18 autonomous experiments using LiCoO2 (001) thin-film deposition as a testbed, SynAgent synthesized highly crystalline films and evolved an understanding of how the substrate temperature governs crystallization, discovering an abrupt threshold and a narrow optimal growth window at 650-690 °C. These results extend autonomous experimentation beyond optimized samples to testable, human-readable understanding.

0.30

Scaling Laws for Tool-Use Agents via Controllable Environment Synthesis

cs.LG ·2026-10-27 ·Andrew Szot, Samira Abnar, Omar Attia, Abbas Kazerouni, Michael Kirchhof +3 more
similarity 0.62
Abstract

We explore how to build performant large language model (LLM) tool-use agents that complete complex, multi-step tasks. Specifically, we study how data composition in synthetically generated tool-use environments affects the training of such agents. To do so, we propose the SynthAPI pipeline, which explicitly controls the diversity of generated environments along the axes of tools, tasks, and the databases on which the tools operate. By systematically varying SynthAPI's generation controls in 458,752 tasks across 849 trained models of four different sizes, we derive a scaling law that predicts downstream tool-use agent generalization based on the scale and composition of the synthesized environments. These predictable relationships reveal several lessons for scaling tool-use agent data. As data budgets grow, scaling tool and database diversity becomes more effective than increasing the number of tasks, and increasing data complexity yields larger gains. Scaling according to these findings yields agents that outperform models trained on data from prior work in large-scale tool-use agent and synthetic environment generation across four evaluation benchmarks.

0.29