CS Paper Radar

Mechanical Engineering Skills: An Open Library of Agent Skills for Design, Analysis and Manufacturing

Achuth Chandrasekhar, Jesse Barkley, Peter Pak, Rumi Loghmani, Aakash Oza, Amir Barati Farimani

cs.MA ·submitted 2026-11-03 23:57 UTC · v1
code/data

Abstract

Mechanical engineers use specialized tools for CAD, simulation, manufacturing and research, each with a distinct interface and learning curve. We present Mechanical Engineering Skills, an open library of 33 agent skills that makes these capabilities accessible through a single text or voice conversation. Each skill combines operating instructions, executable tools and verification procedures. A language model interprets the request, selects and coordinates skills, while deterministic tools perform computations and return checked results. Default workflows require no tool-specific interface training, local model execution or model fine-tuning; skills load on demand and install with one command. Nineteen skills adapt published or preprint research from our laboratory, including text-to-CAD, linkage synthesis, CFD setup, stress-field and lattice surrogates, equation discovery, additive-manufacturing planning and in-process monitoring. Fourteen additional skills support core engineering and education. We describe the skill format, design principles and a method for translating research into practical workflows. Five case studies with explicit evidence scopes and independent reruns demonstrate exact analytical agreement for lattice homogenization, rocket apogee predictions within 4% of stored OpenRocket references, an equation fit nine times more accurate than a cubic polynomial at an unseen temperature, and an end-to-end rehearsal of porosity monitoring. Controlled agent comparisons remain future work. The open library is available at https://github.com/BaratiLab/mechanical-engineering-skills.

Closest papers

Nearest neighbours by meaning across the whole index.

CP-Agent: A Harness-Engineered Agent for Crystal Plasticity Simulation Workflows

cs.AI cond-mat.mtrl-sci ·2026-09-25 ·Samuel Onimpa Alfred, Abhishek Kumar, Veera Sundararaghavan
similarity 0.69
Abstract · 37 pages, 9 figures

Crystal plasticity (CP) simulations predict the mechanical behavior of polycrystalline metals, yet their routine use is hindered by the manual effort of configuring heterogeneous tools, orchestrating multi-step data pipelines, and calibrating constitutive parameters against experiments. These bottlenecks impede productivity in systematic parameter studies, motivating interest in automated workflows. This study presents CP-Agent, a harness-engineered LLM-based agent that autonomously executes complete CP modeling workflows from natural-language tasks. Operating under the ReAct paradigm, the agent reasons about tool selection and sequencing while delegating numerical search to established optimizers. The harness comprises a minimal system prompt, typed tool definitions, a dispatcher, and a safety-bounded iteration loop, encoding domain knowledge through tool schemas rather than hard-coded logic. CP-Agent is demonstrated on four case studies: calibrating four slip parameters of additively manufactured stainless steel 316L against tensile data; validating the workflow against published copper benchmarks, reproducing stress-strain and texture evolution; recovering the initial crystallographic texture of copper, where the agent correctly identifies a diffuse initial texture; and reproducing the multi-pass rolling texture evolution of a Mg-Zn-Ca alloy, where the agent chains five deformation passes and recovers the experimentally observed weakened, split basal texture. In all cases, the agent inferred the correct execution sequence from the task statement, robustly across repeated runs, and delivered physically interpretable results. This work establishes harness engineering as a systematic approach to automating CP modeling workflows while maintaining physical interpretability and auditability through visible reasoning traces.

0.20

PLE: Physical-Engineering's Last Exam

cs.AI ·2026-10-21 ·Rujun Han, Yufan Zhuang, Arijit Ray, Han Yu, Zhongying CuiZhu +8 more
benchmark similarity 0.66
Abstract

Frontier language models now score above 90% on popular knowledge benchmarks and are increasingly deployed as agents that carry out multi-hour professional work. Yet no existing benchmark tests whether they can perform the real-world, economically valuable work of a professional physical engineer, such as modelling physics and legal code requirements across a multi-format project corpus, optimising material and installation costs, and issuing 2D/3D engineering design packages that a licensed reviewer would sign off on. Existing engineering benchmarks focus on textbook question answering, isolated tool calls or self-contained toy design problems. As a result, most of these benchmarks are already saturated by leading agents and solving them is far away from delivering real engineering design. We introduce PLE, a benchmark of 85 long-horizon, agentic tasks in professional physical engineering consisting of electrical, civil, structural and mechanical engineering, where solving a task means completing a realistic, billable engineering deliverable. PLE combines two complementary curation paths. Expert-Authored tasks are created end to end by practising engineers from a professional data provider's expert pool. Co-Authored tasks start from problem statements written by practising engineers; an adversarial Creator-Solver agent pipeline constructs each task's realistic project environment, executable grader and reference deliverables before sending them to expert engineers for validation and difficulty intensification. We evaluate a variety of frontier LLMs under seven publicly available agent harnesses. Even the strongest configuration reaches a mean score of only 50.6%, while spending 27M tokens and 63 minutes per task on average, demonstrating the substantial gap between current agents and autonomous physical engineering design.

0.36

Design-to-Plan: A Large Language Model-Based Multi-Agent Framework for Manufacturing Process Planning from 3D CAD Models and 2D Engineering Drawings

cs.RO cs.AI ·2026-08-25 ·Muhammad Tayyab Khan, Lequn Chen, Wenhe Feng, Seung Ki Moon
benchmark similarity 0.64
Abstract · Submitted to Elsevier Journal

Manufacturing process planning transforms heterogeneous design information into coherent manufacturing decisions. However, existing approaches focus on isolated subtasks, such as feature recognition, drawing interpretation, or tool selection, and struggle to support the full reasoning chain from design artifacts to process plans. This is critical when planning must interpret 3D CAD models, 2D engineering drawings, materials, and domain-specific rules. To address this gap, this paper presents Design-to-Plan, a large language model (LLM)-based multi-agent framework for end-to-end manufacturing process planning. An orchestrator coordinates specialized agents for 3D feature recognition, 2D drawing analysis, 2D-3D context fusion, knowledge retrieval, process sequencing, tool selection, and report generation. Rather than using LLMs as standalone text generators, the framework deploys them as reasoning agents that interact with deterministic modules and knowledge sources to produce consistent and traceable decisions. In this hybrid design, deterministic modules and specialized agents extract structured information from CAD and drawing inputs, while LLM agents perform context-aware reasoning, retrieve manufacturing rules, resolve conflicts, and generate planning outputs. The framework is evaluated using 300 benchmark cases across three downstream ReAct-enabled agents, plus separate evaluations of CAD feature recognition, drawing analysis, and 2D-3D context fusion. The parallel architecture achieves 100% success across downstream agents, Tool F1 scores of 95.9%-97.6%, 90% source detection accuracy in conflict analysis, and a 60%-68% reduction in token usage for key planning tasks. Results show that structured LLM-based multi-agent coordination can bridge design representations and manufacturing knowledge, enabling scalable, efficient, and traceable design-to-plan automation.

0.45

SkillAlchemy: Open-World Agent Skill Creation

cs.AI ·2026-08-24 ·Hengjun Wang, Shuyue Wei, Boyi Liu, Jun Yang, Yongxin Tong
similarity 0.64
Abstract · 33 pages, 7 figures, 8 tables. Includes appendices

Agent skills are reusable procedural artifacts that extend language agents with specialized workflows, tool conventions, and domain behaviors at inference time. However, creating reliable skills still depends largely on human authorship, model priors, or execution traces. These sources are often unavailable for unfamiliar tasks, suggesting the need to create skills from open-world materials. In this paper, we study open-world skill creation: given an underspecified skill brief and a source-access specification, a creator must discover behavior-relevant requirements omitted by the brief and determine how broadly each source-derived procedure is justified. We propose SkillAlchemy, an admission-centered framework for source-grounded skill creation. SkillAlchemy identifies implicit requirements through contrastive evidence, admits candidate procedures based on evidence-supported scope, and compiles the admitted content into a grammar-guided skill package. Extensive experiments across 87 SkillsBench v1.1 tasks demonstrate that SkillAlchemy improves pass rate over no-skill execution by 19.9 percentage points and the strongest automated baseline by 8.6 percentage points, while achieving performance comparable to human-curated skills.

0.17

Skill2Env: Capability-Oriented Environment Synthesis from Skills for General Agents

cs.AI ·2026-09-27 ·Weiyi Xu, Xiaowen Yang, Wen Da, Hang Xu, Canwei Li +5 more
similarity 0.63
Abstract

Executable environments are critical for post-training agents on tasks that require tool use and multi-step interaction, but constructing executable tasks together with their environments remains difficult to scale. Skills provide reusable domain knowledge, operational procedures, and tool-use instructions, but a substantial gap remains between the information contained in a skill and a concrete, challenging task with a complete executable environment. To address this gap, we introduce Skill2Env, a capability-oriented framework that starts from a skill and uses agent capability demands to guide task and environment synthesis. Skill2Env represents these demands through reusable difficulty patterns and instantiates them into task blueprints that specify objectives, challenges, environment facts, information boundaries, and acceptance criteria. These blueprints guide the joint construction of task instructions, execution substrates, workspaces, and rubric-based evaluators around source skills. We further propose Iterative Task Hardening, which uses solver execution evidence to identify insufficiently challenging task designs, strengthen or extend their difficulty-pattern instantiations, and revise the corresponding blueprints and environments. Using 1.5K high-scoring trajectories generated from Skill2Env environments for supervised fine-tuning, we observe consistent improvements across a broad range of agent benchmarks, demonstrating the effectiveness of capability-oriented environment synthesis for agent post-training.

0.15

WorkGenesis: Building the Worlds That Teach Agents to Work

cs.AI ·2026-09-30 ·Xinyu Zhu, Fenyi Liu, Yuzhu Cai, Shuo Tang, Rui Ye +2 more
similarity 0.62
Abstract · 47 pages

The ability of Large Language Model (LLM) agents to complete daily and professional work is receiving increasing attention. Training such agents requires realistic work scenarios. Expert-authored occupational work is costly and slow to produce, while unconstrained synthesis often yields tasks with weak factual grounding or internally inconsistent requirements. To bridge this gap, we introduce WorkGenesis, a framework that constructs executable occupational work from real-world artifacts through two core technical innovations: (1) Evidence-Based Work Construction, which grounds each unit of work in real-world evidence by retrieving public files guided by O*NET occupational knowledge and synthesizing the surrounding context, companion materials, work request, and itemwise rubric around them; and (2) Execution-Guided Consistency Verification, which renders a reference deliverable inside the constructed work, attributes every unsatisfied rubric item to the agent, the task, or the rubric, and uses task and rubric defects as feedback to iteratively repair the work until it passes the audit. Experimental results demonstrate that Fx-Work-35B, trained with simple supervised fine-tuning (SFT) on only 20K units of work synthesized by WorkGenesis, achieves the highest scores among all comparable-scale baselines on the five reported metrics across GDPvalAA-v2, APEX-Agents-AA, and JobBench (31.00 versus 24.79 average score), and even surpasses frontier models such as the 1.6T DeepSeek-V4-Pro-Preview. These results show that WorkGenesis provides scalable training data for working agents.

0.41

SkillBuffBench: Measuring What Agent Skills Contribute across Harnesses, Models, Skill Access Modes and Memory

cs.AI cs.CLcs.LG ·2026-11-17 ·Gengyue Dong, Ye Wei, Zheng Zhu, Yidong Han, Jiale Miao +2 more
benchmark similarity 0.61
Abstract · 18 pages, 2 figures, 6 tables. Work in progress: benchmark design and protocol; results to be added in a later version

Agent Skills, file-based packages of procedural knowledge that a coding agent can discover and load on demand, are now shipped by every major agent harness, yet the evidence for how much they help comes almost entirely from settings in which the right Skill is hand-picked for the task and the agent starts from a blank slate. Neither holds in deployment, where an agent chooses from whatever library happens to be installed and frequently carries memory from earlier work. We present SkillBuffBench, a benchmark and paired evaluation protocol that treats Skill access as a three-level factor (no Skill, a curated Skill, and automatic invocation from an installed library), crosses it with memory (off and on), with four agent harnesses and with multiple models (the state-of-the-art proprietary models from Anthropic, Google and OpenAI, and the state-of-the-art open-weight models from Chinese providers), every model being run under every harness, and evaluates the result on research tasks contributed by domain experts together with the Skills they use, currently in materials science and biology, with the suite extended on a rolling basis. Every run is marked by a deterministic verifier; uncertainty is reported with a paired, task-level bootstrap; and cost, agent rounds and wall-clock time are reported alongside the score rather than folded into it. This version of the paper describes the design of the benchmark, its evaluation protocol and its current tasks and Skills. The evaluation is in progress: results will be added once the runs are complete, and the task suite, results and analysis will continue to be updated on a rolling basis.

0.21

EngiWorld: What Can Frontier Agents Deliver in Professional Engineering Environments?

cs.AI cs.CL ·2026-09-29 ·Hongcheng Gao, Hailong Qu, Yu Lei, Henghui Sun, Haoyang Li +17 more
benchmarkcode/data similarity 0.61
Abstract · Project page: https://engiworld.github.io

Autonomous agents have made rapid progress in general-purpose computer use, yet reliable automation of professional industrial engineering remains out of reach. Engineering workflows require reasoning over geometric and physical constraints and keeping dependencies consistent across software and design stages. We present EngiWorld, a benchmark designed around the capabilities that real engineering projects require, from operating a single application to solving engineering problems end to end. It contains 1,301 expert-curated tasks spanning six engineering domains (CAD, CAE, CAM, BIM, EDA, and DCC) and 26 professional software applications, with both GUI and CLI interfaces. The tasks are organized into six types, corresponding to capabilities that real engineering projects require. We further introduce an artifact-centric evaluation methodology built on a unified suite of domain verifiers. The verifiers programmatically check whether final and intermediate artifacts are geometrically valid, physically feasible, and compliant with design rules. Beyond binary success, they also score how well optimized designs meet their specifications. Evaluation of seven frontier models reveals a substantial capability gap: the strongest model scores only 44.7/100, and just 3.6% of runs on tasks that require cross-software coordination succeed. EngiWorld provides a rigorous foundation for measuring progress toward agents that operate professional engineering software end to end.

0.45