CS Paper Radar

A Low-Dimensional Riemannian Alternating Optimization Algorithm for BD-RIS-Assisted Multiuser Beamforming

Weitao Xia, Zheyu Wu, Ya-Feng Liu

eess.SP ·submitted 2026-09-27 07:16 UTC · v1

Abstract

This paper investigates joint active and passive beamforming for a multiuser downlink system assisted by a fully-connected beyond-diagonal reconfigurable intelligent surface (BD-RIS). Since the number of tunable components grows quadratically with the number of RIS elements, directly optimizing the full scattering matrix becomes increasingly computationally expensive. To address this challenge, we first derive an equivalent low-dimensional formulation that replaces the full scattering matrix with a variable whose number of columns equals the number of users. We further establish a smooth manifold structure on a dense subset of the equivalent feasible set, based on which we develop a low-dimensional Riemannian alternating optimization (LD-RAO) algorithm, where the passive variable is updated using a single Riemannian gradient ascent step at each iteration. The convergence of LD-RAO is established under mild assumptions. Numerical results demonstrate that the proposed algorithm achieves the same performance as the existing state-of-the-art (SOTA) full-dimensional methods with significantly less CPU time, particularly for large-scale BD-RIS.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.68
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24

Extremely Large Beyond-Diagonal RIS: Low-Rank Modal Optimization for Near-Field Communications

eess.SP ·2026-08-11 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Eva Lagunas, Symeon Chatzinotas
theory similarity 0.63
Abstract

Beyond-diagonal reconfigurable intelligent surfaces (BD-RIS) achieve their best performance when fully connected, at the price of an optimization and hardware burden that grows quadratically, and per iteration cubically, with the number of elements. Extremely large surfaces make this burden prohibitive, while their sheer aperture places both the base station and the users in the radiative near field, where far-field design tools break down. This paper introduces the extremely large BD-RIS (XL-BD-RIS) concept and shows that near-field geometry is precisely what makes fully connected performance affordable at scale. Modeling the cascade with the free-space Green function, we prove that the aperture fields live in a low-dimensional subspace spanned by the spherical-wave responses of the terminal positions, and we design a compact unitary modal matrix on this subspace, built from localization information alone, that provably attains the fully connected optimum with a number of reconfigurable entries set by the geometry and independent of the panel size. A weighted-MMSE Riemannian algorithm optimizes the beamformers and the modal matrix with monotone convergence at panel-size-independent cost. Numerical results show that a $24\times24$-element panel reaches the fully connected optimum with about two hundred entries instead of three hundred thousand. A mismatched DFT beamspace pays a sixty-fold entry penalty rooted in the beam spread of spherical wavefronts, while the classical block-wise architecture delivers strictly lower rates at any matched entry budget.

0.34

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.63
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19

Statistical Design of Multi-BD-RIS-Assisted User-Centric Cell-Free Massive MIMO

eess.SP ·2026-10-24 ·Mohammad Ezaz, Azadeh Vosoughi
theory similarity 0.61
Abstract · 6 pages, 5 figures. Submitted to IEEE ICC 2027 on Oct 16th 2026

We study the uplink of a user-centric (UC) cell-free massive MIMO system assisted by multiple beyond-diagonal reconfigurable intelligent surfaces (BD-RISs), under imperfect channel state information (CSI) and pilot reuse. The BD-RISs are modeled as reciprocal, lossless, group-connected scattering networks. We first derive the minimum mean-square error (MMSE) estimation statistics for each user's aggregate channel to its serving access points (APs). To avoid frequent CSI acquisition and RIS reconfiguration, we optimize the BD-RIS scattering matrices using long-term channel statistics, allowing their configurations to remain fixed over multiple coherence blocks. Specifically, we minimize the sum of normalized mean-square errors (NMSEs) of the MMSE aggregate channel estimators, subject to the symmetry and unitarity constraints of the group-connected architecture. We develop a product-manifold Riemannian optimization algorithm and analyze its convergence and computational complexity. To evaluate uplink spectral efficiency (SE), we separately derive a closed-form expression for the effective SINR under maximum ratio (MR) combining at the central processing unit (CPU) and establish a lower bound on the achievable ergodic SE. The SINR derivation accounts for the statistical dependence among channels associated with different APs due to shared BD-RIS-assisted propagation paths, including cross-AP second-order statistics under pilot reuse. Numerical results show that moderate group connectivity retains most of the NMSE improvements achieved by full connectivity, with larger optimization gains as BD-RIS-assisted paths strengthen relative to direct AP-user links. They also reveal that lower estimation NMSE does not necessarily lead to higher uplink SE.

0.32

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.60
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

RIS-Assisted Downlink Pinching-Antenna Systems With NLOS Environments

eess.SP ·2026-10-25 ·Yue Geng, Kah Chan Teh, Tee Hiang Cheng
similarity 0.59
Abstract · 6 pages, 4 figures

This paper investigates a reconfigurable intelligent surface (RIS)-assisted downlink pinching-antenna system (PASS) in the presence of non-line-of-sight (NLOS) users caused by unavoidable obstacles. An RIS is deployed to extend the coverage of the physically constrained PASS by establishing virtual line-of-sight (LOS) links. To improve system performance, we propose a zero-forcing (ZF) beamforming-based alternating optimization (AO) framework that minimizes the transmit power by jointly optimizing the RIS reflection coefficients and pinching-antenna (PA) activation positions. Specifically, the RIS reflection coefficients are optimized using the Riemannian conjugate gradient (RCG) method, while a novel projected gradient-based method is developed to efficiently optimize the PA activation positions. Simulation results demonstrate that the proposed AO framework outperforms baseline schemes in terms of both transmit power and computational efficiency under different system configurations including the rate requirements and RIS sizes.

0.16

Fast Tri-Hybrid Beamforming via Deep Unfolding

eess.SP ·2026-08-27 ·Pinjun Zheng, Md. Jahangir Hossain, Anas Chaaban
top venue similarity 0.59
Abstract

Tri-hybrid multiple-input multiple-output architectures have recently emerged as a promising enabler for next-generation wireless systems, as they potentially provide enhanced design flexibility without a proportional increase in hardware cost or power consumption. However, the resulting triple-domain coupling renders beamforming optimization challenging and computationally demanding. This paper develops a fast tri-hybrid beamforming framework for multiuser downlink systems employing dynamic metasurface antennas (DMAs). Based on the equivalence between weighted sum-rate maximization and weighted sum-minimum mean square error minimization, an iterative algorithm is first derived under per-DMA input power constraints, with all update equations available in closed form, but convergence inherently remains slow. To enable real-time operation, the algorithm is further unfolded into a trainable finite-iteration architecture using graph neural networks that ensure permutation equivariance and support varying numbers of users. Trained on ray-tracing channel data, the unfolded method achieves comparable or higher system sum-rates while reducing runtime by more than an order of magnitude. The method also demonstrates strong scalability, robustness, and generalization across various environments.

0.40

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.58
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09