CS Paper Radar

SymNetPro: LOS-Aware Directional Multi-Transmitter Localization from Sparse Radio Observations

Lyuzhou Ye, Heng Fan, Yan Huang

cs.IT cs.CV ·submitted 2026-09-27 22:04 UTC · v2
code/data

Abstract

Directional multi-transmitter localization from sparse received-power observations is difficult because the receiver observes only the source-unresolved aggregate field: multiple directional sources superpose, building blockage fragments their visible regions, and stronger sources can mask weaker ones. We present SymNetPro, which retains the dual-task radio-map reconstruction and localization backbone of SymNet and adds two targeted components. First, a sparse line-of-sight (LOS)-aware attention bias injects obstruction-aware spatial relations into selected token interactions. Second, transmitter-drop augmentation recomposes training scenes after removing one sample-supported transmitter, exposing the model to controlled source-cardinality variation. Experiments on directional ray-traced urban environments show substantially lower OSPA than representative localization baselines under extreme sparse sampling, with consistent gains under measurement noise and increasing transmitter count. A transmitter-specific evidence analysis further shows that remaining misses concentrate in regimes where the target contributes little distinguishable power to the aggregate observation.

Comment
Code, datasets, and model checkpoints are available at:https://github.com/LyuzhouYe98/SymNet--a-multi-task-network-for-joint-radio-map-reconstruction-and-transmitter-localization

Closest papers

Nearest neighbours by meaning across the whole index.

Foundation Models for Wireless Localization: Pretraining, Adaptation, and Utilization

eess.SP ·2026-08-31 ·Guangjin Pan, Jiajia Guo, Zheng Xing, Hui Chen, Chao-Kai Wen +2 more
similarity 0.62
Abstract · 4 pages, 1 table. This work has been submitted to the IEEE for possible publication

Accurate wireless localization is a key enabler for 6G networks, yet remains challenging under diverse and rapidly changing propagation conditions. Model-based methods degrade when multipath channels are non-resolvable and model mismatches occur, while supervised deep learning demands large labeled datasets and generalizes poorly to new deployments. Inspired by foundation models (FMs) in language and vision, this article presents a unified framework for FM-based wireless localization that learns transferable channel representations from large-scale unlabeled channel state information and adapts to new environments with minimal or even no supervision. We review the fundamentals of FMs, compare the FM paradigm with existing localization approaches, and introduce a three-stage framework spanning large-scale pretraining, localization-oriented fine-tuning, and context-augmented inference, together with the location-aware applications it enables. Ray-tracing-based case studies show improved positioning accuracy and cross-environment generalization. Finally, we present an outlook on key research directions toward AI-native networks for wireless localization.

0.21

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.61
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

MAPLE-RF: Efficient Probabilistic RF Source Localization in Partially Explored Environments

cs.RO eess.SP ·2026-09-17 ·Haozhe Lei, Sundeep Rangan
similarity 0.60
Abstract

Localizing a radio-frequency (RF) transmitter from received signals often requires a model of the environment to predict how obstacles block and reflect the signal. In many robotic applications, however, only a partial map is available, particularly when a robot localizes the source while exploring with simultaneous localization and mapping (SLAM). We study single-snapshot transmitter localization on such partially explored maps and compare two approaches that output a posterior over transmitter locations. The first extends a digital-twin method, which ray-traces every candidate location, to partial maps by treating unexplored space as free and training on mixed map coverage. The second, MAPLE-RF, encodes estimated path angles of arrival and signal-to-noise ratios as grid channels aligned with map knownness, occupancy, and line-of-sight visibility, and a U-Net scores all candidate positions in one pass without simulating propagation at inference. Ray-tracing simulations of indoor environments indicate that training on mixed map coverage is essential for both approaches. The digital-twin approach is more accurate on most single-snapshot metrics, while MAPLE-RF comes close at a query cost that does not depend on the propagation model and is more than two orders of magnitude below a fresh full-grid query with general-purpose ray tracing. Both outperform Gaussian and Gaussian-mixture baselines, and on exploration routes guided by its own estimates, fused MAPLE-RF posteriors place more probability near the source than the compared methods. Code and data will be released.

0.29

Vision-Wireless Fusion for Multi-User Localization: A Cross-Modal Transformer Approach

cs.CV eess.SP ·2026-09-20 ·Can Zheng, Jiguang He, Guofa Cai, Henk Wymeersch, Merouane Debbah
similarity 0.59
Abstract · 12 pages, 8 figures, 7 tables

Accurate multi-user localization is challenging in complex urban environments, where wireless measurements can become ambiguous under noise, blockage, and multipath, while visual observations provide complementary spatial context. This paper presents a vision-wireless fusion framework for multi-user localization using pilot-indexed channel state information (CSI). Orthogonal pilot indices preserve the identities of the communicating UEs in the CSI token sequence and localization outputs. The model encodes each pilot-indexed CSI observation as a query token and uses cross-attention to retrieve user-specific information from spatial visual memory. Self-attention among CSI tokens further captures inter-user interactions, while the resulting multimodal representations are used for user-wise localization. Experiments on different datasets show consistent improvements over model-based, CSI-only, and multimodal-fusion baselines. Further experiments evaluate the model under different wireless and visual conditions.

0.38

GLocFM: A Geometry-Aware Foundation Model for 3D Indoor Wireless Localization

eess.SP cs.AI ·2026-08-10 ·Chenghong Bian, Chaozheng Wen, Hongze Chen, Jun Zhang
similarity 0.59
Abstract · 13 pages, single column

Learning-based wireless localizers often fail to utilize geometric information about the propagation environment, limiting their ability to exploit non-line-of-sight (NLoS) propagation and generalize across scenes. To bridge this gap, we propose GLocFM, a Geometry-aware Localization Foundation Model, which jointly exploits WiFi measurements and scene geometry represented as a 3D point cloud. We formulate localization as a maximum-likelihood (ML) estimation problem, where the goal is to find a transmitter position that maximizes the likelihood of the wireless observations conditioned on the scene geometry. The likelihood of a candidate transmitter position is calculated by a learned scoring function that matches the observed delay--angle-of-arrival (AoA) spectrum against the spectrum predicted for that candidate. A hierarchical scene encoder extracts propagation-relevant features to produce geometric priors for LoS and one-bounce reflection paths. For scenarios with imperfect synchronization, we further introduce a time-of-flight (ToF)-robust GLocFM model to handle unknown ToF offsets. GLocFM is trained on a multi-modal synthetic indoor localization dataset comprising 221 diverse scenes whose associated wireless signals are generated using Sionna RT. On both synthetic and the NeRF$^{2}$ dataset based on real measurements, GLocFM reduces mean 3D localization error relative to one of the state-of-the-art localization baselines by 49.5\% and 48.8\%, respectively. Ablations across different number of receiver, bandwidths, and array sizes further demonstrate the effectiveness and robustness of the proposed framework.

0.40

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.59
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

Electromagnetic Twin: Completing the Wireless World from Sparse Channel Evidence

eess.SP ·2026-08-21 ·Tuo Wu, Jie Tang, Kangda Zhi, Junteng Yao, Maged Elkashlan +3 more
similarity 0.58
Abstract

Acquiring dense channel information over many locations and beams incurs considerable pilot and processing overhead. Radio maps and channel knowledge maps (CKMs) reduce this overhead by reusing site-specific channel information, but their contents must be refreshed when new measurements or environmental observations become available. This paper introduces an \emph{electromagnetic twin} as an updatable digital representation that uses sparse channel evidence to reconstruct the wireless state requested by communication queries. Rather than replacing radio maps or CKMs, the twin uses a CKM as channel memory, combines it with registered scene information, and regenerates its outputs after each evidence update. We instantiate this idea by completing a two-dimensional channel-gain field from sparse samples and an incomplete floor plan. A learned RF completion backbone recovers the main propagation structure, and a lightweight residual adapter tests whether frozen CLIP features provide useful side information. With $4\%$ measured locations and $55\%$ missing semantic objects, the RF backbone attains $4.44$ dB RMSE, compared with $8.29$ dB for CKM interpolation and $8.38$ dB for an incomplete physics prior. Residual adaptation reduces RMSE by a paired mean of $0.135$ dB (95\% confidence interval: $0.100$--$0.169$ dB), but a same-capacity random-feature control is statistically indistinguishable from the CLIP-conditioned adapter. The results therefore support the measurement--update--query loop and lightweight residual correction, while avoiding an unsupported attribution of the correction to visual semantics.

0.46

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.58
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19