CS Paper Radar

SHIFT-Truck: A High-Fidelity Aerodynamics Dataset and Benchmark for Pickup Trucks

Riddhiman Raut, Yin Yu, Aashwin Anand Mishra, Michael Emory, Thomas Economon, Peter Lyu, Juan J. Alonso

cs.CE cs.LGphysics.comp-ph ·submitted 2026-09-29 22:55 UTC · v1
benchmarkdataset

Abstract

Pickup trucks account for 14% of new light-duty vehicles produced in the United States, yet are among the least aerodynamic. Their open cargo bed adds a flow absent from existing automotive aerodynamics datasets such as DrivAerML and SHIFT-SUV: the shear layer leaving the cab roof passes over a recirculating bed flow before separating again at the tailgate. The resulting drag lowers fuel efficiency, raises emissions and limits the range of electric trucks. Scale-resolved Computational Fluid Dynamics (CFD) is too costly for broad design exploration; neural surrogates can predict flow features at a fraction of that cost, provided they are trained on large-scale, high-fidelity, domain-specific data. We introduce SHIFT-Truck, the first such dataset for pickup trucks. It comprises 1,000 Spalart-Allmaras delayed detached-eddy simulations (SA-DDES) of a reference pickup geometry morphed across 17 shape parameters. Each case is run on a mesh of about 100 million cells at a Reynolds number of $1.4 \times 10^7$ and released with time-averaged surface pressure, wall shear stress, volumetric pressure and velocity. The setup is verified by grid refinement and repeated runs, and checked against wind-tunnel measurements. We define geometry-grouped splits and benchmark four neural surrogates, DoMINO, GeoTransolver, AB-UPT and SMART, on surface and volume tracks. SHIFT-Truck also introduces controlled distribution shifts in the operating point, the input surface discretization and the vehicle archetype. Models with strong in-distribution performance can degrade substantially under these shifts: operating-condition changes expose failures to infer speed dependence, while tessellation and cross-vehicle shifts reveal markedly different robustness across architectures. SHIFT-Truck is thus a benchmark not only for surrogate accuracy but also for generalization across physical and numerical distributions.

Closest papers

Nearest neighbours by meaning across the whole index.

Measuring and Improving Transfer of Neural Surrogates for Vehicle Aerodynamics

cs.LG physics.flu-dyn ·2026-11-18 ·Favour Nerrise, Julian Busch, Gurpreet Singh Hora, Martin Sipka, Danielle C. Maddix +1 more
theory similarity 0.77
Abstract · 23 pages, 5 figures, 13 tables

Neural surrogates for external vehicle aerodynamics are fast alternatives to physics-based computational fluid dynamics (CFD) simulations. Their foundational limitation is a lack of zero-shot generalization across vehicle classes, which results in an expensive, custom training campaign for each new vehicle design. Similar to pretrained models in other fields, a pretrained surrogate should adapt to a new vehicle class using only a few simulations and stay accurate on its pretraining domain. No prior study has systematically tested this transfer behavior. We conduct a large-scale, controlled benchmarking study on five DrivAerML-pretrained surrogates across four independent target datasets. These datasets differ from the source in geometry, CFD solver, turbulence model, and flow conditions. We find that fine-tuning these surrogates outperforms training from scratch in fewer than half of the comparisons and lowers the accuracy of the surrogate on its source dataset. We introduce GeoReplay, a geometry- and gradient-aligned source replay that keeps source simulations resembling the target in training and applies their updates only when they agree with the target gradient. A risk bound separates geometric coverage from differences in the simulated physics, and we prove that every sufficiently small GeoReplay step decreases the target training objective. GeoReplay lowers the source error of fine-tuning in 77 of 80 settings and matches its target accuracy.

0.15

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.72
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.42

Cross-Domain Pretraining for Steady-State Neural CFD Surrogates

cs.LG ·2026-10-07 ·Anthony Zhou, Amir Barati Farimani, Shirley Ho, Rudy Morel
dataset similarity 0.69
Abstract · 43 pages, 25 figures

Neural surrogates for computational fluid dynamics (CFD) have the potential to greatly enhance engineering innovation through accelerating simulation. However, the primary limitation for neural surrogates is the lack of generalization to geometries and applications beyond the training set, which is significant given the diversity of engineering scenarios. Currently, this is addressed by generating a new dataset for a specific application; however, this requires running costly numerical solvers. In this work, we take a step toward addressing this by studying neural surrogates trained across different geometries, boundary conditions, and fidelities. We find that cross-domain pretraining improves zero- and few-shot performance on held-out datasets relative to both training from scratch and transferring from domain-specific experts. In particular, finetuning a pretrained, cross-domain model can achieve 2-3x lower errors at the same sample size and use 8x fewer samples to achieve the same error, compared to training from scratch. This benefit is architecture agnostic and improves with model size and pretraining dataset diversity. Furthermore, we study how and why cross-domain pretraining works in CFD surrogates, and find that simply pooling steady-state datasets is both sufficient and effective. Given the high cost of generating CFD data, leveraging existing datasets through cross-domain pretraining will likely be a valuable strategy as future surrogates expand to tackle new problems and use cases.

0.43

FSAN: Flow State Attention Network for Aerodynamic Prediction

cs.CV cs.AI ·2026-09-06 ·Wenxuan Jin, Jianguo Yao, Haibing Guan, Xijun Li
similarity 0.67
Abstract

Accurate aerodynamic prediction is critical for designing fuel-efficient and safe transportation systems such as aircraft and automobiles, yet traditional computational fluid dynamics (CFD) simulations remain computationally expensive and expertise-intensive, severely limiting their use in iterative design and real-time analysis. Existing deep learning surrogates suffer from two major limitations: (i) they are evaluated on datasets with narrow flow-condition ranges, leaving their performance under complex flow conditions undemonstrated; (ii) they treat global flow conditions as a single vector injected uniformly across all surface points, ignoring that different geometric regions experience distinct local flow phenomena, which degrades prediction accuracy under complex flow conditions. To address these limitations, we propose the Flow State Attention Network (FSAN). FSAN separately encodes point cloud and flow conditions, then partitions the geometry into multiple flow states via learnable soft assignments, and uses flow features to update these state representations, which in turn influence point cloud features through state changes. This enables fine-grained, state-specific interaction between geometry and flow information. Extensive experiments on two well-recognized aerodynamic benchmarks demonstrate that FSAN achieves the highest accuracy among the methods compared in this work at a higher computational cost. On Emmi-Wing, FSAN reduces the Relative L2 (REL-L2) error by over 20\% compared to the strongest baseline (Transolver), and on DrivAerNet++, it achieves a 10\% reduction compared to the strongest baseline (AdaField). These results establish FSAN as a promising neural surrogate on public benchmarks with diverse flow conditions and geometries.

0.22

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.67
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

CIS-Transolver: A Cross-layer Incremental-State Neural Operator for Fine-Scale Automotive Aerodynamic Flow Prediction

cs.LG cs.AI ·2026-10-19 ·Jianglong Liu, Zhicheng Zhu, Jia Hao, Liangyue Jia, Wenxuan He
similarity 0.66
Abstract

Neural operators offer an efficient data-driven approach to predicting complex automotive aerodynamic flows. However, spectral bias limits their ability to reconstruct fine-scale flow variations around geometric features such as side mirrors and wheel arches. Reliable assessment of local geometric changes therefore requires models that capture fine spatial detail together with global flow interactions. Inspired by iterative refinement and state evolution, we propose CIS-Transolver, a cross-layer incremental-state neural operator that integrates local multiscale information into global flow modeling. The method extracts local feature variations and encodes them as zeroth- to second-order geometric moments. These encodings are combined with information from earlier layers to form a cross-layer memory. Memory-derived corrections enter the value branch of Physics-Attention, allowing local details to inform global physical-state interactions throughout the network. We systematically evaluate CIS-Transolver on three public automotive aerodynamics benchmarks, ShapeNet-Car, AhmedML, and DrivAerNet++, covering surface pressure fields and volumetric pressure and velocity fields. CIS-Transolver achieves the lowest mean relative L2 error among the evaluated methods for all five prediction metrics across the three benchmarks. Relative error reductions average 8.72% compared with the best baseline for each metric. Also achieves the lowest high-frequency spectral errors across all five metrics, with an average relative reduction of 16.06% compared with the best baseline. These results support cross-layer reuse of local information for fine-scale automotive flow prediction.

0.21

TurtLES: A Large-Scale Benchmark for Turbulent 3D Neural PDE Surrogates

cs.LG physics.flu-dyn ·2026-11-06 ·Jarno Platenburg, Armand Kassaï Koupaï, Paola Cinnella, Patrick Gallinari
benchmarkdataset similarity 0.66
Abstract

Machine-learning surrogates are increasingly used to accelerate computational fluid dynamics, yet progress is limited by the lack of benchmarks capturing realistic, time-dependent turbulent flows. We introduce TurtLES, a 14 TB dataset of 3D turbulent cylinder wakes in the shear-layer transition regime, computed via high-fidelity implicit large-eddy simulations. The dataset contains 400 trajectories of 400 time steps each, with 3-11 million points per frame, spanning variations in geometry, Reynolds number, and angle of attack. Unlike existing datasets, TurtLES combines (i) physically realistic turbulence with an active energy cascade driven by vortex stretching, (ii) dense irregular meshes, and (iii) long-horizon temporal dynamics. We benchmark state-of-the-art neural operators on autoregressive rollouts and identify key failure modes, including temporal instability, loss of small-scale energy, and challenges in learning on large irregular domains. TurtLES provides a new benchmark for evaluating surrogate models on 3D turbulent wakes at industrially relevant mesh resolution.

0.31

HGPTrans: Hierarchical Graph-Pooling Transolver for Automotive Aerodynamic Drag Coefficient Prediction

cs.CV physics.flu-dyn ·2026-09-24 ·Bo Liu, Fengli Zhang, Qiuli Luo, Lianrui Nie, Wenjiang Wang
similarity 0.66
Abstract

Accurate and rapid prediction of the aerodynamic drag coefficient ($C_D$) is essential for vehicle design, particularly during early-stage design, where many candidate geometries must be evaluated. Although computational fluid dynamics (CFD) provides reliable aerodynamic estimates, its high computational cost limits large-scale design exploration. This paper proposes the hierarchical graph-pooling Transolver (HGPTrans), which combines hierarchical graph pooling with Transolver-based attention to directly predict $C_D$ from vehicle surface meshes. Motivated by the fact that vehicle aerodynamics depends on both local geometric features and long-range interactions among spatially distant surface regions, HGPTrans integrates three complementary components. Graph isomorphism convolutions encode discriminative local geometry, Transolver-style slice attention captures global interactions with linear computational complexity, and information-redundancy-aware hierarchical pooling progressively removes redundant nodes while preserving informative geometric structures. The model is trained and evaluated on the large-scale DrivAerNet and DrivAerNet++ datasets, where it achieves the lowest mean absolute error and mean squared error among the evaluated baselines. Its generalization capability is further assessed through transfer learning on a real-vehicle dataset containing both sedans and sport utility vehicles (SUVs), achieving relative $L_1$ errors of 1.56\% (sedans) and 2.12\% (SUVs) with an inference time of approximately $0.293$ s per vehicle. This corresponds to an acceleration of several orders of magnitude relative to high-fidelity CFD while keeping the predicted drag coefficients within a few percent of the CFD reference. Ablation studies confirm each component's contribution and reveal the effects of depth and pooling ratio.

0.17