CS Paper Radar

CIS-Transolver: A Cross-layer Incremental-State Neural Operator for Fine-Scale Automotive Aerodynamic Flow Prediction

Jianglong Liu, Zhicheng Zhu, Jia Hao, Liangyue Jia, Wenxuan He

cs.LG cs.AI ·submitted 2026-10-19 13:08 UTC · v3

Abstract

Neural operators offer an efficient data-driven approach to predicting complex automotive aerodynamic flows. However, spectral bias limits their ability to reconstruct fine-scale flow variations around geometric features such as side mirrors and wheel arches. Reliable assessment of local geometric changes therefore requires models that capture fine spatial detail together with global flow interactions. Inspired by iterative refinement and state evolution, we propose CIS-Transolver, a cross-layer incremental-state neural operator that integrates local multiscale information into global flow modeling. The method extracts local feature variations and encodes them as zeroth- to second-order geometric moments. These encodings are combined with information from earlier layers to form a cross-layer memory. Memory-derived corrections enter the value branch of Physics-Attention, allowing local details to inform global physical-state interactions throughout the network. We systematically evaluate CIS-Transolver on three public automotive aerodynamics benchmarks, ShapeNet-Car, AhmedML, and DrivAerNet++, covering surface pressure fields and volumetric pressure and velocity fields. CIS-Transolver achieves the lowest mean relative L2 error among the evaluated methods for all five prediction metrics across the three benchmarks. Relative error reductions average 8.72% compared with the best baseline for each metric. Also achieves the lowest high-frequency spectral errors across all five metrics, with an average relative reduction of 16.06% compared with the best baseline. These results support cross-layer reuse of local information for fine-scale automotive flow prediction.

Closest papers

Nearest neighbours by meaning across the whole index.

FSAN: Flow State Attention Network for Aerodynamic Prediction

cs.CV cs.AI ·2026-09-06 ·Wenxuan Jin, Jianguo Yao, Haibing Guan, Xijun Li
similarity 0.72
Abstract

Accurate aerodynamic prediction is critical for designing fuel-efficient and safe transportation systems such as aircraft and automobiles, yet traditional computational fluid dynamics (CFD) simulations remain computationally expensive and expertise-intensive, severely limiting their use in iterative design and real-time analysis. Existing deep learning surrogates suffer from two major limitations: (i) they are evaluated on datasets with narrow flow-condition ranges, leaving their performance under complex flow conditions undemonstrated; (ii) they treat global flow conditions as a single vector injected uniformly across all surface points, ignoring that different geometric regions experience distinct local flow phenomena, which degrades prediction accuracy under complex flow conditions. To address these limitations, we propose the Flow State Attention Network (FSAN). FSAN separately encodes point cloud and flow conditions, then partitions the geometry into multiple flow states via learnable soft assignments, and uses flow features to update these state representations, which in turn influence point cloud features through state changes. This enables fine-grained, state-specific interaction between geometry and flow information. Extensive experiments on two well-recognized aerodynamic benchmarks demonstrate that FSAN achieves the highest accuracy among the methods compared in this work at a higher computational cost. On Emmi-Wing, FSAN reduces the Relative L2 (REL-L2) error by over 20\% compared to the strongest baseline (Transolver), and on DrivAerNet++, it achieves a 10\% reduction compared to the strongest baseline (AdaField). These results establish FSAN as a promising neural surrogate on public benchmarks with diverse flow conditions and geometries.

0.22

Airfoil2Vec: Spectral Geometry-Conditioned Neural Surrogate Models for Airfoil Aerodynamics and a Downforce-Generating CFD Dataset

cs.LG physics.flu-dyn ·2026-09-25 ·Haitz Sáez de Ocáriz Borde, Flavio Savarino, Andrei Cristian Popescu, Pietro Innocenzi, Pantelis Papageorgiou +1 more
datasetcode/data similarity 0.69
Abstract

We introduce a dataset of approximately 10,000 Reynolds-Averaged Navier-Stokes (RANS) simulations of steady, incompressible, two-dimensional subsonic flow around downforce-generating NACA 4-digit airfoils, targeting aerodynamic regimes relevant to automotive and motorsport applications (openly available on https://huggingface.co/datasets/ratiolabs/downforce-airfoils). Using this resource, we study geometry-conditioned neural surrogates for fast flow prediction, comparing neural fields with neural ODEs, MLPs with graph-based models, and several spectral geometry-conditioning methods. We further propose Airfoil2Vec, an airfoil-specific spectral geometry encoder that combines the joint contour spectrum with separate spectral representations of camber and thickness, for predicting continuous pressure and velocity fields. We evaluate generalization through angle-of-attack interpolation, interpolation and extrapolation to unseen NACA 4-digit geometries, and generalization to unseen non-NACA airfoils. The resulting surrogate accurately captures aerodynamic quantities and qualitative flow features while providing orders-of-magnitude speedups over conventional computational fluid dynamics.

0.21

SHIFT-Truck: A High-Fidelity Aerodynamics Dataset and Benchmark for Pickup Trucks

cs.CE cs.LGphysics.comp-ph ·2026-09-29 ·Riddhiman Raut, Yin Yu, Aashwin Anand Mishra, Michael Emory, Thomas Economon +2 more
benchmarkdataset similarity 0.66
Abstract

Pickup trucks account for 14% of new light-duty vehicles produced in the United States, yet are among the least aerodynamic. Their open cargo bed adds a flow absent from existing automotive aerodynamics datasets such as DrivAerML and SHIFT-SUV: the shear layer leaving the cab roof passes over a recirculating bed flow before separating again at the tailgate. The resulting drag lowers fuel efficiency, raises emissions and limits the range of electric trucks. Scale-resolved Computational Fluid Dynamics (CFD) is too costly for broad design exploration; neural surrogates can predict flow features at a fraction of that cost, provided they are trained on large-scale, high-fidelity, domain-specific data. We introduce SHIFT-Truck, the first such dataset for pickup trucks. It comprises 1,000 Spalart-Allmaras delayed detached-eddy simulations (SA-DDES) of a reference pickup geometry morphed across 17 shape parameters. Each case is run on a mesh of about 100 million cells at a Reynolds number of $1.4 \times 10^7$ and released with time-averaged surface pressure, wall shear stress, volumetric pressure and velocity. The setup is verified by grid refinement and repeated runs, and checked against wind-tunnel measurements. We define geometry-grouped splits and benchmark four neural surrogates, DoMINO, GeoTransolver, AB-UPT and SMART, on surface and volume tracks. SHIFT-Truck also introduces controlled distribution shifts in the operating point, the input surface discretization and the vehicle archetype. Models with strong in-distribution performance can degrade substantially under these shifts: operating-condition changes expose failures to infer speed dependence, while tessellation and cross-vehicle shifts reveal markedly different robustness across architectures. SHIFT-Truck is thus a benchmark not only for surrogate accuracy but also for generalization across physical and numerical distributions.

0.10

CLNO: Conservative Local Neural Operator for Compressible Flow Prediction

cs.LG math.NA ·2026-10-12 ·Buxuan Wang, Rongzu Li, Qingsong Zou
similarity 0.65
Abstract · 23pages, 15 figures

We propose a conservative local neural operator (CLNO) for accurate and generalizable autoregressive prediction of compressible flows. Building upon the locality and translation invariance of the local neural operator (LNO), CLNO introduces a conservative evolution framework based on local subdomains of fixed physical size, separating local mean-state evolution from fine-scale reconstruction. The flow is encoded into subdomain-integrated conservative states and fine-scale features, while a shared local network predicts interface fluxes for finite-volume updates that enforce discrete conservation. A convolutional reconstruction network recovers fine-scale structures using zero-mean basis functions, preserving the updated local means and providing information for subsequent evolution. To accommodate different physical parameters, Reynolds--Mach number conditioning modulates the encoding, flux-prediction, and reconstruction networks, enabling a single model to learn parameter-dependent dynamics and generalize to unseen parameter combinations without retraining. CLNO supports prediction across spatial resolutions, computational domain sizes, and boundary conditions. Numerical experiments demonstrate improved generalization and competitive or higher accuracy compared with LNO, including order-of-magnitude error reductions in representative cases, at approximately three to five times the inference cost on periodic benchmarks. These results demonstrate accurate, generalizable, and physically consistent flow prediction through conservative local evolution and fine-scale reconstruction.

0.15

HGPTrans: Hierarchical Graph-Pooling Transolver for Automotive Aerodynamic Drag Coefficient Prediction

cs.CV physics.flu-dyn ·2026-09-24 ·Bo Liu, Fengli Zhang, Qiuli Luo, Lianrui Nie, Wenjiang Wang
similarity 0.65
Abstract

Accurate and rapid prediction of the aerodynamic drag coefficient ($C_D$) is essential for vehicle design, particularly during early-stage design, where many candidate geometries must be evaluated. Although computational fluid dynamics (CFD) provides reliable aerodynamic estimates, its high computational cost limits large-scale design exploration. This paper proposes the hierarchical graph-pooling Transolver (HGPTrans), which combines hierarchical graph pooling with Transolver-based attention to directly predict $C_D$ from vehicle surface meshes. Motivated by the fact that vehicle aerodynamics depends on both local geometric features and long-range interactions among spatially distant surface regions, HGPTrans integrates three complementary components. Graph isomorphism convolutions encode discriminative local geometry, Transolver-style slice attention captures global interactions with linear computational complexity, and information-redundancy-aware hierarchical pooling progressively removes redundant nodes while preserving informative geometric structures. The model is trained and evaluated on the large-scale DrivAerNet and DrivAerNet++ datasets, where it achieves the lowest mean absolute error and mean squared error among the evaluated baselines. Its generalization capability is further assessed through transfer learning on a real-vehicle dataset containing both sedans and sport utility vehicles (SUVs), achieving relative $L_1$ errors of 1.56\% (sedans) and 2.12\% (SUVs) with an inference time of approximately $0.293$ s per vehicle. This corresponds to an acceleration of several orders of magnitude relative to high-fidelity CFD while keeping the predicted drag coefficients within a few percent of the CFD reference. Ablation studies confirm each component's contribution and reveal the effects of depth and pooling ratio.

0.17

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.65
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

ISLA: A Coordinate-Free, Measure-Weighted Transformer for Boundary-Driven PDEs

cs.LG cs.CEmath-phphysics.flu-dyn ·2026-11-12 ·Peter Sharpe
similarity 0.65
Abstract · 49 pages, 14 figures, 27 tables. Companion paper to "AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics"…

Symmetry is a foundational principle of physics: the behavior of a PDE-governed system does not depend on the coordinate frame, unit system, or mesh used to write it down, and neither should a surrogate model. Yet today's leading neural surrogates lack these invariances and fail under simple transformations of the same problem: for models trained on PDEs of cars in one pose (i.e., translation and rotation), rotating the full PDE raises the surface-pressure error from 4% to more than 100%, and re-sampling its boundary raises it to about 30%. We introduce ISLA (Invariant Slice Attention), a slice-attention transformer for steady, boundary-driven PDEs. Because the boundary determines the interior solution, ISLA encodes the posed boundary once into learned slices and evaluates arbitrary interior points independently through a tree-accelerated learned boundary kernel. Inputs are nondimensionalized in scales computed from the boundary, sums over boundary cells are area-weighted quadratures that converge under mesh refinement, and geometry enters only as distances and relative angles to equivariant slice anchors, making the model equivariant to rigid motions and reflections up to optional token subsampling and tree clustering. On AeroZoo, 2,816 3D flows spanning diverse geometries, poses, physical scales, and boundary conditions, ISLA's mean reference-scaled velocity and pressure errors are at least 1.9 and 2.2 times lower than any baseline's. On full AirfRANS, ISLA is second only to an explicit boundary-integral network (GLOBE), with errors at least 1.6 times lower than Transolver's and GeoTransolver's in every field.

0.23

VATO: A Vortex-Force-Aware Transformer Operator for Unsteady Separated Aerofoil Flows

cs.LG ·2026-09-01 ·Xingxin Yang, Zhan Zhang, Yichen Li, Juan Li
similarity 0.62
Abstract

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4\%, 1.0\%, and 15.6\%, respectively, while VATO-A achieves reductions of 15.8\%, 7.5\%, and 31.2\%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50\% beyond the training range, VATO-A retains a 26.9\% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

0.28