CS Paper Radar

HGPTrans: Hierarchical Graph-Pooling Transolver for Automotive Aerodynamic Drag Coefficient Prediction

Bo Liu, Fengli Zhang, Qiuli Luo, Lianrui Nie, Wenjiang Wang

cs.CV physics.flu-dyn ·submitted 2026-09-24 07:59 UTC · v2

Abstract

Accurate and rapid prediction of the aerodynamic drag coefficient ($C_D$) is essential for vehicle design, particularly during early-stage design, where many candidate geometries must be evaluated. Although computational fluid dynamics (CFD) provides reliable aerodynamic estimates, its high computational cost limits large-scale design exploration. This paper proposes the hierarchical graph-pooling Transolver (HGPTrans), which combines hierarchical graph pooling with Transolver-based attention to directly predict $C_D$ from vehicle surface meshes. Motivated by the fact that vehicle aerodynamics depends on both local geometric features and long-range interactions among spatially distant surface regions, HGPTrans integrates three complementary components. Graph isomorphism convolutions encode discriminative local geometry, Transolver-style slice attention captures global interactions with linear computational complexity, and information-redundancy-aware hierarchical pooling progressively removes redundant nodes while preserving informative geometric structures. The model is trained and evaluated on the large-scale DrivAerNet and DrivAerNet++ datasets, where it achieves the lowest mean absolute error and mean squared error among the evaluated baselines. Its generalization capability is further assessed through transfer learning on a real-vehicle dataset containing both sedans and sport utility vehicles (SUVs), achieving relative $L_1$ errors of 1.56\% (sedans) and 2.12\% (SUVs) with an inference time of approximately $0.293$ s per vehicle. This corresponds to an acceleration of several orders of magnitude relative to high-fidelity CFD while keeping the predicted drag coefficients within a few percent of the CFD reference. Ablation studies confirm each component's contribution and reveal the effects of depth and pooling ratio.

Closest papers

Nearest neighbours by meaning across the whole index.

ONE CYLinder: A Benchmark for Graph-Based Surrogate Modeling of Unsteady Bluff-Body Flows

cs.LG physics.flu-dyn ·2026-09-08 ·Théodore Michel, Antoine Campos, Alban Dujardin, Henry Areiza, Philippe Meliga +1 more
benchmark similarity 0.69
Abstract · pre-print

Graph-based surrogate models offer a promising route to accelerate computational fluid dynamics (CFD) simulations on unstructured meshes. However, their development is limited by the scarcity of benchmark datasets spanning multiple flow regimes and standardized protocols for long-horizon autoregressive prediction. We introduce ONECYL (ONE CYLinder), a new benchmark for unsteady flow past a circular cylinder across laminar, transitional, and high-Reynolds-number regimes. The benchmark comprises 450 high-fidelity Variational Multiscale finite-element simulations (270,000 flow snapshots) with randomized cylinder geometries, providing time-resolved velocity and pressure fields together with mesh connectivity, geometric descriptors, Reynolds numbers, and integrated aerodynamic quantities. Beyond the dataset, ONECYL establishes a unified evaluation framework combining full-field rollout errors, virtual probes, and drag and lift predictions to assess numerical accuracy and physical fidelity. To accompany the benchmark, we develop a Graph Transformer as a reference baseline predicting velocity and pressure fields autoregressively on unstructured meshes. Using ONECYL, we investigate geometric representations and physics-based regularization across the three Reynolds-number regimes. The results show that explicitly encoding the cylinder geometry through a level-set representation consistently improves long-horizon prediction accuracy and generalization to unseen geometries, while divergence-based regularization becomes increasingly beneficial as flow complexity increases. The ONECYL benchmark and its Graph Transformer baseline provide a reproducible framework for evaluating graph-based surrogate models and establish a foundation for future research on long-horizon prediction of unsteady bluff-body flows.

0.27

FSAN: Flow State Attention Network for Aerodynamic Prediction

cs.CV cs.AI ·2026-09-06 ·Wenxuan Jin, Jianguo Yao, Haibing Guan, Xijun Li
similarity 0.66
Abstract

Accurate aerodynamic prediction is critical for designing fuel-efficient and safe transportation systems such as aircraft and automobiles, yet traditional computational fluid dynamics (CFD) simulations remain computationally expensive and expertise-intensive, severely limiting their use in iterative design and real-time analysis. Existing deep learning surrogates suffer from two major limitations: (i) they are evaluated on datasets with narrow flow-condition ranges, leaving their performance under complex flow conditions undemonstrated; (ii) they treat global flow conditions as a single vector injected uniformly across all surface points, ignoring that different geometric regions experience distinct local flow phenomena, which degrades prediction accuracy under complex flow conditions. To address these limitations, we propose the Flow State Attention Network (FSAN). FSAN separately encodes point cloud and flow conditions, then partitions the geometry into multiple flow states via learnable soft assignments, and uses flow features to update these state representations, which in turn influence point cloud features through state changes. This enables fine-grained, state-specific interaction between geometry and flow information. Extensive experiments on two well-recognized aerodynamic benchmarks demonstrate that FSAN achieves the highest accuracy among the methods compared in this work at a higher computational cost. On Emmi-Wing, FSAN reduces the Relative L2 (REL-L2) error by over 20\% compared to the strongest baseline (Transolver), and on DrivAerNet++, it achieves a 10\% reduction compared to the strongest baseline (AdaField). These results establish FSAN as a promising neural surrogate on public benchmarks with diverse flow conditions and geometries.

0.22

Airfoil2Vec: Spectral Geometry-Conditioned Neural Surrogate Models for Airfoil Aerodynamics and a Downforce-Generating CFD Dataset

cs.LG physics.flu-dyn ·2026-09-25 ·Haitz Sáez de Ocáriz Borde, Flavio Savarino, Andrei Cristian Popescu, Pietro Innocenzi, Pantelis Papageorgiou +1 more
datasetcode/data similarity 0.66
Abstract

We introduce a dataset of approximately 10,000 Reynolds-Averaged Navier-Stokes (RANS) simulations of steady, incompressible, two-dimensional subsonic flow around downforce-generating NACA 4-digit airfoils, targeting aerodynamic regimes relevant to automotive and motorsport applications (openly available on https://huggingface.co/datasets/ratiolabs/downforce-airfoils). Using this resource, we study geometry-conditioned neural surrogates for fast flow prediction, comparing neural fields with neural ODEs, MLPs with graph-based models, and several spectral geometry-conditioning methods. We further propose Airfoil2Vec, an airfoil-specific spectral geometry encoder that combines the joint contour spectrum with separate spectral representations of camber and thickness, for predicting continuous pressure and velocity fields. We evaluate generalization through angle-of-attack interpolation, interpolation and extrapolation to unseen NACA 4-digit geometries, and generalization to unseen non-NACA airfoils. The resulting surrogate accurately captures aerodynamic quantities and qualitative flow features while providing orders-of-magnitude speedups over conventional computational fluid dynamics.

0.21

SHIFT-Truck: A High-Fidelity Aerodynamics Dataset and Benchmark for Pickup Trucks

cs.CE cs.LGphysics.comp-ph ·2026-09-29 ·Riddhiman Raut, Yin Yu, Aashwin Anand Mishra, Michael Emory, Thomas Economon +2 more
benchmarkdataset similarity 0.66
Abstract

Pickup trucks account for 14% of new light-duty vehicles produced in the United States, yet are among the least aerodynamic. Their open cargo bed adds a flow absent from existing automotive aerodynamics datasets such as DrivAerML and SHIFT-SUV: the shear layer leaving the cab roof passes over a recirculating bed flow before separating again at the tailgate. The resulting drag lowers fuel efficiency, raises emissions and limits the range of electric trucks. Scale-resolved Computational Fluid Dynamics (CFD) is too costly for broad design exploration; neural surrogates can predict flow features at a fraction of that cost, provided they are trained on large-scale, high-fidelity, domain-specific data. We introduce SHIFT-Truck, the first such dataset for pickup trucks. It comprises 1,000 Spalart-Allmaras delayed detached-eddy simulations (SA-DDES) of a reference pickup geometry morphed across 17 shape parameters. Each case is run on a mesh of about 100 million cells at a Reynolds number of $1.4 \times 10^7$ and released with time-averaged surface pressure, wall shear stress, volumetric pressure and velocity. The setup is verified by grid refinement and repeated runs, and checked against wind-tunnel measurements. We define geometry-grouped splits and benchmark four neural surrogates, DoMINO, GeoTransolver, AB-UPT and SMART, on surface and volume tracks. SHIFT-Truck also introduces controlled distribution shifts in the operating point, the input surface discretization and the vehicle archetype. Models with strong in-distribution performance can degrade substantially under these shifts: operating-condition changes expose failures to infer speed dependence, while tessellation and cross-vehicle shifts reveal markedly different robustness across architectures. SHIFT-Truck is thus a benchmark not only for surrogate accuracy but also for generalization across physical and numerical distributions.

0.10

CIS-Transolver: A Cross-layer Incremental-State Neural Operator for Fine-Scale Automotive Aerodynamic Flow Prediction

cs.LG cs.AI ·2026-10-19 ·Jianglong Liu, Zhicheng Zhu, Jia Hao, Liangyue Jia, Wenxuan He
similarity 0.65
Abstract

Neural operators offer an efficient data-driven approach to predicting complex automotive aerodynamic flows. However, spectral bias limits their ability to reconstruct fine-scale flow variations around geometric features such as side mirrors and wheel arches. Reliable assessment of local geometric changes therefore requires models that capture fine spatial detail together with global flow interactions. Inspired by iterative refinement and state evolution, we propose CIS-Transolver, a cross-layer incremental-state neural operator that integrates local multiscale information into global flow modeling. The method extracts local feature variations and encodes them as zeroth- to second-order geometric moments. These encodings are combined with information from earlier layers to form a cross-layer memory. Memory-derived corrections enter the value branch of Physics-Attention, allowing local details to inform global physical-state interactions throughout the network. We systematically evaluate CIS-Transolver on three public automotive aerodynamics benchmarks, ShapeNet-Car, AhmedML, and DrivAerNet++, covering surface pressure fields and volumetric pressure and velocity fields. CIS-Transolver achieves the lowest mean relative L2 error among the evaluated methods for all five prediction metrics across the three benchmarks. Relative error reductions average 8.72% compared with the best baseline for each metric. Also achieves the lowest high-frequency spectral errors across all five metrics, with an average relative reduction of 16.06% compared with the best baseline. These results support cross-layer reuse of local information for fine-scale automotive flow prediction.

0.21

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

cs.LG ·2026-11-03 ·Andrea Cenzato, Lukas Karch, Andre Luckow, Yoran Pichon, Francesco Pasqua +4 more
benchmarkcode/data similarity 0.65
Abstract

This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets. The dataset is available for download at https://huggingface.co/datasets/andreacenzato/Ground-Wing

0.21

Measuring and Improving Transfer of Neural Surrogates for Vehicle Aerodynamics

cs.LG physics.flu-dyn ·2026-11-18 ·Favour Nerrise, Julian Busch, Gurpreet Singh Hora, Martin Sipka, Danielle C. Maddix +1 more
theory similarity 0.61
Abstract · 23 pages, 5 figures, 13 tables

Neural surrogates for external vehicle aerodynamics are fast alternatives to physics-based computational fluid dynamics (CFD) simulations. Their foundational limitation is a lack of zero-shot generalization across vehicle classes, which results in an expensive, custom training campaign for each new vehicle design. Similar to pretrained models in other fields, a pretrained surrogate should adapt to a new vehicle class using only a few simulations and stay accurate on its pretraining domain. No prior study has systematically tested this transfer behavior. We conduct a large-scale, controlled benchmarking study on five DrivAerML-pretrained surrogates across four independent target datasets. These datasets differ from the source in geometry, CFD solver, turbulence model, and flow conditions. We find that fine-tuning these surrogates outperforms training from scratch in fewer than half of the comparisons and lowers the accuracy of the surrogate on its source dataset. We introduce GeoReplay, a geometry- and gradient-aligned source replay that keeps source simulations resembling the target in training and applies their updates only when they agree with the target gradient. A risk bound separates geometric coverage from differences in the simulated physics, and we prove that every sufficiently small GeoReplay step decreases the target training objective. GeoReplay lowers the source error of fine-tuning in 77 of 80 settings and matches its target accuracy.

0.15

Hierarchical Graph Representation Learning with Pooling-Induced Substructures

cs.LG ·2026-11-10 ·Luca Sbicego, Xiaowen Dong, Dorina Thanou
top venuecode/data similarity 0.60
Abstract · Accepted to NeurIPS 2026

Hierarchical graph-level tasks that require reasoning over substructures that extend beyond local neighborhoods are posing challenges for standard Graph Neural Networks (GNNs). While graph pooling aims to address this by coarsening graphs into hierarchical representations, existing methods often fail to explicitly preserve the substructures they induce, leading to inconsistent empirical performance. Moreover, evaluating such approaches remains challenging due to the lack of benchmarks with explicit hierarchical structure. We propose Pooled-Substructure-Aware GNNs, an approach to graph pooling that explicitly preserves and processes substructures uncovered by structure-based pooling schemes. We show that this design enhances the expressive power of pooling-based GNNs in the sense of the Weisfeiler-Lehman (WL) test. To enable principled evaluation, we introduce two new synthetic datasets with controllable hierarchical structure and propose a metric to characterize the prevalence of hierarchical patterns in real-world graph-level benchmarks. On tasks with relevant hierarchical structure, our approach outperforms matched pooling baselines, while remaining competitive on structurally simpler benchmarks. Code and datasets are publicly available at https://github.com/lsbicego/PSA-GNN/.

0.35