CS Paper Radar

Vulnerability-Weighted Routing of Timing-Critical Nets for Configuration-Upset-Resilient SRAM-Based FPGAs

Mostafa Darvishi

eess.SY cs.ARcs.ETcs.PFeess.SP ·submitted 2026-09-24 20:54 UTC · v1

Abstract

Conventional FPGA routing optimizes timing, congestion, and routability but does not distinguish routes with similar nominal performance and substantially different susceptibility to configuration-induced delay degradation. This paper presents a vulnerability-weighted routing methodology for SRAM-based field-programmable gate arrays (FPGAs) that incorporates predicted routing-fault severity directly into the routing objective. A continuous vulnerability cost relates delay perturbations caused by electrically attachable dormant routing resources to the available downstream timing slack, while a complementary configuration-concentration term discourages excessive localization of vulnerable resources. To limit implementation disruption, only the highest-risk nets are selectively ripped up and rerouted while unaffected routes remain fixed. The method is implemented on a Zynq UltraScale+ XCZU7EV using a Vivado/RapidWright-based flow and evaluated across four routed benchmarks against commercial timing-driven routing, vulnerability-agnostic rerouting, and binary vulnerable-resource avoidance. Controlled configuration-equivalent perturbations provide hardware-level validation. The proposed method reduces aggregate configuration-induced timing vulnerability by 41.7% with approximately 1.0% nominal timing degradation and captures 85.8% of the vulnerability reduction obtained at the expanded routing budget by rerouting only the highest-risk 5% of eligible nets. The results demonstrate that continuous vulnerability information can improve configuration-upset resilience with limited impact on nominal routing quality.

Comment
13 pages, 5 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

GRACIDIT: Graph-Circuit Digital Twin for Configuration-Induced Routing Delay Prediction in Zynq UltraScale+ FPGAs

eess.SY cs.ARcs.ETeess.SP ·2026-09-24 ·Mostafa Darvishi
similarity 0.69
Abstract · 25 pages, 7 figures, 3 tables

Configuration-induced perturbations in SRAM-based FPGAs may activate dormant programmable routing branches and increase path delay without immediately producing a functional error. Although prior studies have separately investigated the electrical origin of these delay changes, their in-situ detection, and the topology of commercial routing fabrics, a scalable method for predicting their timing impact at the granularity of programmable interconnect points and routed nets remains unavailable. This paper presents GRACIDIT, a graph-circuit digital twin framework for predicting configuration-induced routing delay degradation in Zynq UltraScale+ FPGAs. The proposed framework extracts the routing-resource graph of the XCZU7EV programmable fabric from the vendor design database, identifies inactive programmable interconnect points adjacent to active routes, and represents each candidate perturbation through its branch topology, geometric span, fan-out, physical region, and downstream loading. These graph features are combined with a calibrated reduced-order electrical model to estimate the delay introduced by single and cumulative routing-branch activations. Controlled configuration-equivalent perturbations are generated on a ZCU104 platform and characterized using complementary routing-domain oscillators and phase-sweep probes. The resulting model associates predicted delay shifts with available timing slack to rank vulnerable programmable interconnect points and routed nets and to construct a spatial vulnerability atlas of the programmable fabric. Experimental evaluation demonstrates a mean absolute prediction error of 7.8 ps, achieves 87.4 percent recall for slack-violating perturbations, and attains a Recall at 10 value of 0.90 for the most vulnerable routing resources.

0.38

From Routing Delay Shifts to Silent Data Corruption: Neutron-Induced SEU Effects in AXI-Based Zynq UltraScale+ MPSoCs

eess.SY cs.ARcs.ETphysics.acc-ph+1 ·2026-09-24 ·Mostafa Darvishi
benchmark similarity 0.64
Abstract · 23 pages, 14 figures, 3 tables

SRAM-based FPGA system-on-chip devices are vulnerable to single-event upsets (SEUs) in configuration memory, which may perturb programmable routing resources and degrade communication fabrics. In modern Zynq UltraScale+ MPSoCs, such routing disturbances can introduce small propagation delay shifts that remain logically transparent yet compromise AXI-based data transfers and lead to silent data corruption. Although routing delay degradation and AXI interconnect failures have been studied independently, their experimental correlation under neutron irradiation has not been established. This work presents a cross-layer investigation on a ZCU104 platform integrating routing-dominated delay sensors with an AXI interconnect benchmark comprising replicated accelerators. Neutron irradiation experiments were conducted on the fully operational system, while a frame-level configuration fault injector implemented via the internal configuration access port enables controlled upset emulation. Measured routing delay events are statistically correlated with communication failures, and cross-sections for both timing shifts and AXI malfunctions are derived. The results experimentally demonstrate how neutron-induced routing perturbations propagate into system-level silent data corruption in UltraScale+ MPSoCs, providing insight for resilience-oriented AXI-based design in neutron-rich environments.

0.32

Heuristic-Driven Resource Optimization for Decoupled Memory Channels on FPGAs

cs.AR cs.DC ·2026-10-18 ·Arnab A. Purkayastha, Shobhit Aggarwal, Jay Tharwani
published similarity 0.60
Abstract · 6 pages. Accepted version of a paper published in the 2026 IEEE International Conference on Interdisciplinary Approaches in Technology and M…

Determining OpenCL channel depths for Decoupled Access-Execute (DAE) architectures in High-Level Synthesis (HLS) is critical for balancing performance and hardware efficiency. Conventional static analysis tools often over-provision these memory channels to ensure performance safety, leading to significant resource stranding. This paper presents an expansion of an LLVM-based static analysis framework, originally proposed for automated DAE generation, by introducing a hardware-aware refinement layer. We identify a counter-intuitive Performance Inversion Paradox linked to baseline memory stalls, where high-stall, grid-based kernels reach peak performance at minimal channel depths and suffer up to a 61% throughput degradation when depths are increased. We propose a Heuristic Refinement Layer that optimizes OpenCL channel depths based on this correlation between baseline stalls and performance saturation. Experimental results demonstrate that our expanded framework successfully identifies the Minimal Peak Performance point across various benchmarks. By avoiding the performance traps of standard over-provisioning, we achieve a 2.52x improvement in Resource Efficiency for an illustrative HotSpot application. This approach maintains peak execution speedup while ensuring the leanest possible hardware profile, outperforming conservative tool-based static predictions.

0.40

DiffRouter: A Differentiable Routing Framework for UltraScale FPGAs

cs.AR ·2026-10-24 ·Xiaohan Gao, Zhili Xiong, Yusu Wang, David Z. Pan
published similarity 0.59
Abstract

Routing has become a major bottleneck in large-scale FPGA design flows, where traditional routers rely on sequential net-by-net processing and rip-up-reroute heuristics. This inherent sequentialism limits parallelism, leads to suboptimal utilization of routing resources, and significantly increases runtime on modern FPGAs. This paper introduces DiffRouter, the first differentiable, gradient-based FPGA routing framework with GPU acceleration. By lifting routing into a continuous optimization space, DiffRouter enables highly concurrent routing and improved global optimality before projecting solutions back onto the discrete fabric. The framework consists of three key stages: (1) Resource-pruned preprocessing, which extracts compact routing variables per net to reduce memory footprint and problem complexity; (2) Differentiable global routing via gradient descent, which formulates routing as a Lagrangian-relaxed optimization that minimizes wirelength while iteratively enforcing connectivity and congestion constraints as relaxed terms; and (3) Postprocessing, which maps the continuous wire distributions to a valid UltraScale routing solution and completes solutions by detailed routing. Experiments on the FPGA 2024 Routing Contest benchmarks show that DiffRouter outperforms state-of-the-art parallel routers, achieving over 5x speedup over RWRoute and 2x over Vivado, and running 18% faster than the state-of-the-art academic FPGA router Potter while delivering competitive critical path wirelength.

0.28

PACT: Post-route Agentic Checkpoint Tuning for FPGA Timing Closure

cs.AR ·2026-08-19 ·Huan Lin, Kunlong Li, Lingli Wang, Zhiang Wang
publishedcode/data similarity 0.58
Abstract · Accepted to the 2026 International Conference on Field-Programmable Technology (FPT 2026)

Late-stage FPGA timing closure often starts from an implemented design whose remaining violations are visible in timing reports. Engineering change order (ECO) optimization is a standard mechanism for applying localized changes to such designs without restarting the full implementation flow. Automating post-route ECO optimization remains challenging. A post-route change must improve timing without violating routing legality, hold or pulse-width timing constraints, checkpoint replayability or functional equivalence. This paper presents PACT, a Post-route Agentic Checkpoint Tuning framework for Vivado design checkpoints (DCP). PACT represents post-route tuning as validation-gated transitions between accepted and candidate checkpoints. From checkpoint-derived evidence, an agent selects localized backend actions through a profile-driven recipe planner over typed Vivado and RapidWright skills, and probes tool behavior in isolated workspaces. PACT records each trial as an evidence-gated case to guide candidate generation and suppress unsafe, unsupported or ineffective actions. Across 35 UltraScale+ post-route checkpoints, PACT improves validation-clean $F_{\max}$ (maximum operating frequency) by a geometric mean of $+22.30\%$ over the original implementations, compared with $+15.14\%$ for DATuner and $+9.78\%$ for the Codex Agent. On shared designs, PACT achieves these gains $6.4\times$ faster than the uncapped DATuner and at an average token cost of only \$0.16 per DCP ($24.5\times$ lower than the free-form Codex Agent). The source code is available in an anonymous repository

0.51

Randomized Caches in Hardware: Challenges and Trade-offs

cs.AR cs.CR ·2026-10-30 ·Xinrui Wang, Pascal Kosak, Christof Paar, Daniel Genkin, Yuval Yarom +1 more
similarity 0.56
Abstract

Randomized caches protect against side-channel attacks by obfuscating the mapping of memory addresses to cache locations. Existing proposals typically describe architectural behavior, leaving practical hardware implementation challenges largely unexplored. We implement four prominent designs, CEASER-S, ScatterCache, SassCache, and MIRAGE, and integrate them as the last-level cache (LLC) of a multi-core out-of-order RISC-V system-on-chip (SoC). We identify common and design-specific implementation challenges and develop practical solutions. We evaluate complete FPGA implementations by running SPEC CPU 2017 rate and GAPBS workloads to completion, providing, to our knowledge, the first comparative evaluation of these designs on a common full-system hardware platform. Pipelining the index derivation function (IDF) alone is insufficient: in three of the four variants, other components become the frequency bottleneck, reducing frequency by up to 35% relative to the baseline set-associative cache. Redesigning the critical paths while preserving mappings, rekeying, and victim-selection policies brings the three affected variants to no more than 10% below the baseline frequency, at the cost of added latency or reduced concurrency. Increased LLC access latency, rather than additional misses, dominates IPC degradation, reducing instructions per cycle by up to 5% for SPEC and 11% for GAPBS. Hardware overhead depends on the design and implementation technology: FPGA lookup-table usage increases by 10-35%, while ASIC area increases by 1-14%.

0.22

Minimum RISC-V: Maximum FPGA Efficiency

cs.AR ·2026-10-15 ·Martin Langhammer, Bogdan Pasca, Gregg Baeckler
published similarity 0.55
Abstract

RISC-V processors are now widely available for FPGAs, with most FPGA vendors replacing their proprietary soft-CPU architectures with this instruction-set architecture (ISA). Although contemporary FPGAs are increasingly resource- and feature-rich, a soft processor system---including memory---often occupies a disproportionately large footprint and delivers only modest performance relative to the potential of the target device. In this work we first design a lightweight but deeply pipelined RISC-V core that can run above 700 MHz in a mid-range device and that is capable of retiring one instruction per clock under ideal conditions. We then develop and demonstrate a new optimization method that compiles the final application binary and a specialized processor instance contemporaneously. The method expands each instruction into an application-specific encoding, removes unused datapath and decode logic during synthesis, and yields cores that remain assembler-compatible with the original program while no longer being binary-compatible with a general-purpose RISC-V. We implement example designs on RV32I (base integer), RV32M (integer multiply), and RV32F (single-precision floating-point) configurations. Our optimized RISC-V is as small as 170 ALMs and closes timing at 775 MHz in an Altera Agilex-5 device. Finally, we show that these processors can be packed into a deterministic area and stepped-and-repeated continuously without material impact on performance, enabling predictable multi-core density planning.

0.35

Scalable AXI4 Transaction Monitoring for Mixed-Criticality SoCs: From Phase-Level Precision to ID-Level Efficiency

cs.AR ·2026-08-31 ·Chaoqun Liang, Thomas Benz, Alessandro Ottaviano, Michael Rogenmoser, Luca Benini +2 more
top venue similarity 0.55
Abstract

Mixed-criticality Systems-on-Chip (SoCs) with on-chip interconnects based on the AXI4 open standard protocol lack a protocol-level timeout mechanism, exposing systems to deadlocks and missed real-time deadlines when subordinate devices or managers fail or stall due to hardware faults, radiation-induced upsets, or software errors. This work presents a configurable hardware intellectual property (IP), non-intrusive in fault-free operation, that detects AXI4 protocol violations and timing faults at runtime and restores interconnect liveness through a cut-and- drain isolation mechanism. To address the fundamental trade-off between monitoring granularity and area cost, we introduce three designs at decreasing monitoring granularity: Phase-Level Track-ing (PLT), which provides cycle-accurate fault localization across individual protocol phases; Channel-Level Tracking (CLT), which coalesces per-phase monitors into channel-level supervision; and ID-Level Tracking (ILT), which achieves sub-linear area scaling by monitoring only per-ID transaction boundaries. Synthesized in GlobalFoundries 12 nm technology, CLT reduces area by 36.7% relative to PLT while preserving worst-case detection bounds at a minimal detection latency overhead, whereas ILT achieves an 89.2% area reduction suitable for tightly constrained deployments at the cost of a 3.7x higher median detection latency with coarser fault localization. Fault injection campaigns on a RISC-V SoC across 1.2 million scenarios confirm that no fault manifesting as an AXI4 protocol or liveness violation escaped detection, with observed detection latencies consistently bounded by theoretical worst-case predictions.

0.41