CS Paper Radar

Scalable AXI4 Transaction Monitoring for Mixed-Criticality SoCs: From Phase-Level Precision to ID-Level Efficiency

Chaoqun Liang, Thomas Benz, Alessandro Ottaviano, Michael Rogenmoser, Luca Benini, Angelo Garofalo, Davide Rossi

cs.AR ·submitted 2026-08-31 08:26 UTC · v1
top venue

Abstract

Mixed-criticality Systems-on-Chip (SoCs) with on-chip interconnects based on the AXI4 open standard protocol lack a protocol-level timeout mechanism, exposing systems to deadlocks and missed real-time deadlines when subordinate devices or managers fail or stall due to hardware faults, radiation-induced upsets, or software errors. This work presents a configurable hardware intellectual property (IP), non-intrusive in fault-free operation, that detects AXI4 protocol violations and timing faults at runtime and restores interconnect liveness through a cut-and- drain isolation mechanism. To address the fundamental trade-off between monitoring granularity and area cost, we introduce three designs at decreasing monitoring granularity: Phase-Level Track-ing (PLT), which provides cycle-accurate fault localization across individual protocol phases; Channel-Level Tracking (CLT), which coalesces per-phase monitors into channel-level supervision; and ID-Level Tracking (ILT), which achieves sub-linear area scaling by monitoring only per-ID transaction boundaries. Synthesized in GlobalFoundries 12 nm technology, CLT reduces area by 36.7% relative to PLT while preserving worst-case detection bounds at a minimal detection latency overhead, whereas ILT achieves an 89.2% area reduction suitable for tightly constrained deployments at the cost of a 3.7x higher median detection latency with coarser fault localization. Fault injection campaigns on a RISC-V SoC across 1.2 million scenarios confirm that no fault manifesting as an AXI4 protocol or liveness violation escaped detection, with observed detection latencies consistently bounded by theoretical worst-case predictions.

Closest papers

Nearest neighbours by meaning across the whole index.

From Routing Delay Shifts to Silent Data Corruption: Neutron-Induced SEU Effects in AXI-Based Zynq UltraScale+ MPSoCs

eess.SY cs.ARcs.ETphysics.acc-ph+1 ·2026-09-24 ·Mostafa Darvishi
benchmark similarity 0.58
Abstract · 23 pages, 14 figures, 3 tables

SRAM-based FPGA system-on-chip devices are vulnerable to single-event upsets (SEUs) in configuration memory, which may perturb programmable routing resources and degrade communication fabrics. In modern Zynq UltraScale+ MPSoCs, such routing disturbances can introduce small propagation delay shifts that remain logically transparent yet compromise AXI-based data transfers and lead to silent data corruption. Although routing delay degradation and AXI interconnect failures have been studied independently, their experimental correlation under neutron irradiation has not been established. This work presents a cross-layer investigation on a ZCU104 platform integrating routing-dominated delay sensors with an AXI interconnect benchmark comprising replicated accelerators. Neutron irradiation experiments were conducted on the fully operational system, while a frame-level configuration fault injector implemented via the internal configuration access port enables controlled upset emulation. Measured routing delay events are statistically correlated with communication failures, and cross-sections for both timing shifts and AXI malfunctions are derived. The results experimentally demonstrate how neutron-induced routing perturbations propagate into system-level silent data corruption in UltraScale+ MPSoCs, providing insight for resilience-oriented AXI-based design in neutron-rich environments.

0.32

ReBoT-MiCS: Reliability-Aware Bounding Time for Enhancing Timing Behavior of Embedded Mixed-Criticality Systems

cs.CE cs.SE ·2026-11-17 ·Mohammad Abbasinia, Behnaz Ranjbar, Akash Kumar
similarity 0.58
Abstract

In Mixed-Criticality (MC) systems, considering multiple Worst-Case Execution Times (WCETs) for the same task, corresponding to different system operation modes, presents a fundamental challenge in MC system design. Identifying suitable WCETs for lower (LO) criticality system operational modes is inherently difficult. Tight low WCET values may trigger frequent mode switches that degrade Quality-of-Service (QoS) by dropping/degrading the lower-criticality tasks and reducing their functionality. However, more conservative values reduce resource efficiency. Moreover, low WCET selection affects exposure assumptions under the adopted transient-fault model, which is used in reliability-aware scheduling analysis. Although some studies have considered low WCET determination to make a reasonable trade-off between processor utilization, mode switching probability and QoS, reliability constraints are typically addressed separately through fault-tolerance mechanisms. This separation overlooks the opportunity to use execution-time bounds as part of design-time reasoning about exposure-related reliability constraints. In this regard, we propose a reliability-aware analytical scheme, named ReBoT-MiCS, to determine low WCETs at design time, jointly balancing utilization, QoS, mode switches, and probabilistic reliability constraints of each task criticality level under a transient-fault exposure model. Experiments conducted with various synthetic and embedded benchmarks demonstrate the efficacy of the proposed scheme, in which utilization can be improved by up to 27.6% and 11.67% on average, while bounding the mode switching probability by up to 5.48%, and satisfying the specified reliability constraints

0.33

A Resilient Runtime-Verification Fabric for Security Monitoring of Critical Edge-IoT Infrastructure

cs.CR cs.DC ·2026-10-05 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +3 more
publishedhighly cited similarity 0.58
Abstract · 21 pages, 2 figures. Accepted at the 21st International Conference on Critical Information Infrastructures Security (CRITIS 2026)

Protecting critical infrastructure increasingly depends on continuously verifying large IoT fleets against formal security specifications at runtime. Yet the runtime-verification (RV) pipelines proposed for this task are typically single-host prototypes whose monitors read a shared log file, with no resilience to the failures such deployments incur: a crash or overload silently drops events, clock skew corrupts the ordering metric monitors require, a time-triggered "node has gone silent" property cannot fire when the network itself falls silent, and one slow consumer stalls the pipeline. Each failure is silent: the monitor keeps emitting verdicts over a corrupted view. We present RV-Fabric, a resilient delivery layer that carries the hierarchy over two brokers (MQTT for device ingest, a durable stream broker for backend delivery) and re-establishes five continuity guarantees: durable delivery under crashes, a trusted event order, progress under total silence, consumer isolation and flow control under bounded overload, each an invariant conditioned on broker durability. Above the transport, RV-Fabric makes evidence completeness part of runtime-verification semantics: every verdict carries a status (sound, degraded, incomplete or unavailable) derived from delivery gaps, retention pressure and liveness, so an incomplete stream cannot yield an unqualified all-clear. Under controlled fault injection on a containerised testbed, measured against a fault-free oracle using the real MonPoly engine, the shared-log baseline misses six of seven injected incidents, reporting each as an unqualified all-clear, whereas RV-Fabric preserves all seven; removing a delivery mechanism reintroduces silent loss, removing isolation costs only timeliness. Two published critical-infrastructure datasets, water-SCADA and IoT/IIoT, replay end-to-end.

0.59

Reversing the Clock: Layout-Aware Recovery of Design Intent from Clock Distribution Networks

cs.CR ·2026-10-02 ·Sascha Tommasone, Zehra Karadağ, Christopher Pawlowicz, Michael Green, Bruno Machado Trindade +4 more
publishedcode/data similarity 0.56
Abstract · Accepted at the IEEE International Conference on Physical Assurance and Inspection of Electronics (PAINE) 2026

Hardware reverse engineering supports competitive analysis and hardware assurance by recovering information about an integrated circuit (IC) from its physical implementation. While existing techniques primarily recover the gate-level netlist, which represents logical functionality, they often overlook physical design decisions such as placement, routing, delay insertion, and interconnect optimization. The clock distribution network encapsulates many of these decisions; however, no prior published work has recovered this network from a fabricated IC to infer design intent. We present a layout-aware methodology that recovers and analyzes the clock distribution network by integrating a recovered gate-level netlist with layout information extracted from scanning electron microscope imagery. Our four-phase pipeline recovers clock-tree topology, buffering, gating and switching, interconnect delay, and crosstalk-mitigation measures. We demonstrate our methodology on a commercial 450 nm IC, recovering a global H-tree backbone with local X-tree-like branching, identifying an independent clock tree and global clock gating, quantifying latency, skew, and routing lengths, and confirming the absence of dedicated crosstalk mitigation. Together, these findings let us reason about the designer's intent. To encourage further research and support reproducibility, we release our clock tree recovery algorithm as open source.

0.45

Exploiting Per-Core Leakage: Electromagnetic Side-Channel Monitoring of Multicore Architectures

cs.CR ·2026-08-28 ·Daehyeon Bae, Sujin Park, Insup Lee, YoungGiu Jung, Kyeongsik Lee +2 more
published similarity 0.56
Abstract · 7 pages, 9 figures. Accepted at the 63rd ACM/IEEE Design Automation Conference (DAC 2026)

Multicore processors are increasingly adopted in embedded systems to meet growing performance demands. However, physical side-channel analysis of multicore architectures remains underexplored, as obtaining usable leakage is inherently challenging. Consequently, side-channel security research on such systems has lagged far behind, leaving a critical security gap. To address this gap, we reveal the electromagnetic leakage mechanisms in multicore architectures and, for the first time, demonstrate per-core leakage exploitation, thereby enabling physical side-channel analysis for these systems. As a practical extension, we present a non-intrusive side-channel monitoring method that achieves per-core granularity. To validate its feasibility and practicality, we implement a prototype on a heterogeneous SoC platform with an RF front-end, and evaluate on a commercial off-the-shelf quad-core embedded system, the Raspberry Pi 4B with ARM Cortex-A72 cores.

0.37

From ASIC to Fleet: Lessons from Building and Operating a Hyperscaler NIC

cs.NI cs.AR ·2026-10-06 ·Prankur Gupta, Alexander Duyck, Jakub Kicinski, Joseph Provine, Neal Peacock +23 more
published similarity 0.55
Abstract · 15 pages, 7 figures, to be published in NSDI'27 - 24th USENIX Symposium on Networked Systems Design and Implementation

We describe the operational infrastructure built to deploy and operate fbnic, a custom multi-host NIC, across hundreds of thousands of production hosts at Meta. Vendor multi-host NICs, designed by retrofitting single-host architectures, suffered from shared firmware and buffers that created cascading isolation failures over seven years. fbnic eliminates these through physical isolation, but shifting to in-house hardware shifts the entire operational burden to the hyperscaler. We present a hardware-in-the-loop CI pipeline testing firmware, driver, and kernel cross-products; a unified observability pipeline co-locating NIC and switch counters for cross-layer fault attribution; a driver-first architecture with fewer than ten firmware message types; a targeted firmware upgrade orchestrator at sub-sled granularity; and scoped repair automation confining blast radius to individual host slices. Over ten months, fbnic achieved a 12X reduction in unplanned unavailability, 37% lower mean time to repair, and 2.3X fewer hardware swaps compared to vendor NICs on the same platform.

0.66

SAGE: Semantic-Aware Geographic Error Recovery for AI Data Movement

cs.AR ·2026-09-09 ·Patrick S. Y. Hung, Zitong Wang, Zekai Zhang, Yu Hin Chan, Shengzhe Lyu +1 more
theory similarity 0.55
Abstract

AI interconnects typically protect and replay packets uniformly, yet numerical bit faults differ sharply in consequence: a low-order mantissa flip may resemble quantization noise, while a high-significance exponent flip can produce a catastrophic outlier or non-finite value. We present SAGE, a semantic-aware geographic error-recovery architecture that decouples whether a detected fault merits replay from where replay restarts. For BF16-like data, a workload-calibrated contract separates catastrophic Class-H faults from bounded Class-M and precision Class-L damage. It first applies a Class-H silent-delivery constraint, then ranks admissible policies by quality-normalized terminal latency, $Ψ_{\rm del}$. Independently, a source-local region table adapts checkpoint intervals to fault geography, shortening recovery segments in noisy regions. Detected Class-H failures may trigger protected negative acknowledgments and full-flit replay; Class-M and Class-L outcomes do not trigger default network replay. We implement SAGE's endpoint and replay protocol in gem5 Garnet and synthesize its fully pipelined checker in ASAP7. At a stable synthetic operating point, a ten-seed contention-faithful direct-Garnet campaign shows that SAGE reduces $Ψ_{\rm del}$ by 30.1% relative to fixed 34-hop recovery, combining 28.0% lower mean latency with improved delivered semantic quality. Under higher-BER synthetic stress at the same offered load, SAGE maintains bounded queues while the fixed baseline accumulates backlog. Application-derived DeiT-S communication traces also show lower mean and p99.5 latency at the evaluated nonzero BERs. Within the qualified operating envelope, CRC32 decoder trials yield a simultaneous 95% per-original Class-H silent-delivery upper bound of $3.18\times10^{-7}$.

0.21

Vulnerability-Weighted Routing of Timing-Critical Nets for Configuration-Upset-Resilient SRAM-Based FPGAs

eess.SY cs.ARcs.ETcs.PF+1 ·2026-09-24 ·Mostafa Darvishi
similarity 0.55
Abstract · 13 pages, 5 figures, 3 tables

Conventional FPGA routing optimizes timing, congestion, and routability but does not distinguish routes with similar nominal performance and substantially different susceptibility to configuration-induced delay degradation. This paper presents a vulnerability-weighted routing methodology for SRAM-based field-programmable gate arrays (FPGAs) that incorporates predicted routing-fault severity directly into the routing objective. A continuous vulnerability cost relates delay perturbations caused by electrically attachable dormant routing resources to the available downstream timing slack, while a complementary configuration-concentration term discourages excessive localization of vulnerable resources. To limit implementation disruption, only the highest-risk nets are selectively ripped up and rerouted while unaffected routes remain fixed. The method is implemented on a Zynq UltraScale+ XCZU7EV using a Vivado/RapidWright-based flow and evaluated across four routed benchmarks against commercial timing-driven routing, vulnerability-agnostic rerouting, and binary vulnerable-resource avoidance. Controlled configuration-equivalent perturbations provide hardware-level validation. The proposed method reduces aggregate configuration-induced timing vulnerability by 41.7% with approximately 1.0% nominal timing degradation and captures 85.8% of the vulnerability reduction obtained at the expanded routing budget by rerouting only the highest-risk 5% of eligible nets. The results demonstrate that continuous vulnerability information can improve configuration-upset resilience with limited impact on nominal routing quality.

0.40