CS Paper Radar

From Routing Delay Shifts to Silent Data Corruption: Neutron-Induced SEU Effects in AXI-Based Zynq UltraScale+ MPSoCs

Mostafa Darvishi

eess.SY cs.ARcs.ETphysics.acc-phphysics.space-ph ·submitted 2026-09-24 20:47 UTC · v1
benchmark

Abstract

SRAM-based FPGA system-on-chip devices are vulnerable to single-event upsets (SEUs) in configuration memory, which may perturb programmable routing resources and degrade communication fabrics. In modern Zynq UltraScale+ MPSoCs, such routing disturbances can introduce small propagation delay shifts that remain logically transparent yet compromise AXI-based data transfers and lead to silent data corruption. Although routing delay degradation and AXI interconnect failures have been studied independently, their experimental correlation under neutron irradiation has not been established. This work presents a cross-layer investigation on a ZCU104 platform integrating routing-dominated delay sensors with an AXI interconnect benchmark comprising replicated accelerators. Neutron irradiation experiments were conducted on the fully operational system, while a frame-level configuration fault injector implemented via the internal configuration access port enables controlled upset emulation. Measured routing delay events are statistically correlated with communication failures, and cross-sections for both timing shifts and AXI malfunctions are derived. The results experimentally demonstrate how neutron-induced routing perturbations propagate into system-level silent data corruption in UltraScale+ MPSoCs, providing insight for resilience-oriented AXI-based design in neutron-rich environments.

Comment
23 pages, 14 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Vulnerability-Weighted Routing of Timing-Critical Nets for Configuration-Upset-Resilient SRAM-Based FPGAs

eess.SY cs.ARcs.ETcs.PF+1 ·2026-09-24 ·Mostafa Darvishi
similarity 0.64
Abstract · 13 pages, 5 figures, 3 tables

Conventional FPGA routing optimizes timing, congestion, and routability but does not distinguish routes with similar nominal performance and substantially different susceptibility to configuration-induced delay degradation. This paper presents a vulnerability-weighted routing methodology for SRAM-based field-programmable gate arrays (FPGAs) that incorporates predicted routing-fault severity directly into the routing objective. A continuous vulnerability cost relates delay perturbations caused by electrically attachable dormant routing resources to the available downstream timing slack, while a complementary configuration-concentration term discourages excessive localization of vulnerable resources. To limit implementation disruption, only the highest-risk nets are selectively ripped up and rerouted while unaffected routes remain fixed. The method is implemented on a Zynq UltraScale+ XCZU7EV using a Vivado/RapidWright-based flow and evaluated across four routed benchmarks against commercial timing-driven routing, vulnerability-agnostic rerouting, and binary vulnerable-resource avoidance. Controlled configuration-equivalent perturbations provide hardware-level validation. The proposed method reduces aggregate configuration-induced timing vulnerability by 41.7% with approximately 1.0% nominal timing degradation and captures 85.8% of the vulnerability reduction obtained at the expanded routing budget by rerouting only the highest-risk 5% of eligible nets. The results demonstrate that continuous vulnerability information can improve configuration-upset resilience with limited impact on nominal routing quality.

0.40

SEU Hardened Multi-Context Spintronic FPGA

cs.ET ·2026-11-05 ·Abdolah Amirany, HamidReza Imani, Samuel Farid, Tarek El-Ghazawi
benchmark similarity 0.60
Abstract

Due to susceptibility to radiation-induced soft errors and resource constraints implementing large and complex designs on field programmable gate arrays (FPGAs) in harsh environments is challenging. Therefore, to mitigate these issues, this paper proposes an innovative approach through the introduction of a single event upset (SEU)-hardened spintronic FPGA architecture that incorporates multi-context capabilities. Leveraging the non-volatile properties of magnetic tunnel junction (MTJ), the proposed design can store two/four distinct configurations internally, eliminating the dependence on external non-volatile memory which significantly boosts the system performance. Additionally, through post-layout simulation, we demonstrate our design immunity to SEU, which enhances its reliability and operational stability in environments susceptible to radiation-induced soft errors. The efficiency of the proposed design was also evaluated using the ROSSETA benchmark, which serves as a representative model for real-world FPGA applications.

0.24

Proton Irradiation Characterization of an Open-Source ML Accelerator on a Zynq UltraScale+ MPSoC

cs.AR cs.ETcs.LG ·2026-09-04 ·Saad Memon, Rafal Graczyk, Jan Swakoń, Leszek Grzanka, Sebastian Kusyk +1 more
code/data similarity 0.60
Abstract

As spaceborne computing systems increasingly rely on neural network (NN) accelerators, the opacity of commercial, black-box architectures severely restricts the development of verifiable radiation mitigation strategies. Open-source, register-transfer level (RTL)-accessible accelerators resolve this limitation by enabling user-defined instrumentation, yet few have empirical radiation-response baselines. This work establishes a foundational system-level proton-irradiation baseline for an unmitigated open-source Tensil NN accelerator deployed on a Zynq UltraScale+ SoC executing ResNet-20 inference. Under 20 to 58 MeV proton irradiation, we delivered $4.29 \times 10^{10}$ p/cm$^{2}$ within monitored operational windows. Seven workload interruptions required two restarts of the notebook process, four reboots or board resets, and one power-cycle sequence. Two output-corruption events returned incorrect CIFAR-10 classes without loss of service. In the longer event, the accelerator returned a class absent from the ten-image CIFAR-10 pool for 39 consecutive inputs at normal cadence. The process remained alive, while the kernel log, limited memory test, and sampled power showed no anomaly. Observation of the stuck-class sequence ended with scheduled bitstream reconfiguration. All nine onsets occurred under the nominal 4 cm beam, which exposed the SoC, LPDDR4, and additional board circuitry; none occurred under the 2 cm SoC-centered field. This pattern shows a field association but does not establish LPDDR4 as the cause because field size was confounded with run order and dose. Linux-managed accelerators require end-to-end content checks and recovery that reaches the state in which corruption can persist. This baseline documents availability loss and silent output corruption, supporting future software hardening of COTS FPGA-SoCs for neural-network inference in space systems.

0.58

GRACIDIT: Graph-Circuit Digital Twin for Configuration-Induced Routing Delay Prediction in Zynq UltraScale+ FPGAs

eess.SY cs.ARcs.ETeess.SP ·2026-09-24 ·Mostafa Darvishi
similarity 0.59
Abstract · 25 pages, 7 figures, 3 tables

Configuration-induced perturbations in SRAM-based FPGAs may activate dormant programmable routing branches and increase path delay without immediately producing a functional error. Although prior studies have separately investigated the electrical origin of these delay changes, their in-situ detection, and the topology of commercial routing fabrics, a scalable method for predicting their timing impact at the granularity of programmable interconnect points and routed nets remains unavailable. This paper presents GRACIDIT, a graph-circuit digital twin framework for predicting configuration-induced routing delay degradation in Zynq UltraScale+ FPGAs. The proposed framework extracts the routing-resource graph of the XCZU7EV programmable fabric from the vendor design database, identifies inactive programmable interconnect points adjacent to active routes, and represents each candidate perturbation through its branch topology, geometric span, fan-out, physical region, and downstream loading. These graph features are combined with a calibrated reduced-order electrical model to estimate the delay introduced by single and cumulative routing-branch activations. Controlled configuration-equivalent perturbations are generated on a ZCU104 platform and characterized using complementary routing-domain oscillators and phase-sweep probes. The resulting model associates predicted delay shifts with available timing slack to rank vulnerable programmable interconnect points and routed nets and to construct a spatial vulnerability atlas of the programmable fabric. Experimental evaluation demonstrates a mean absolute prediction error of 7.8 ps, achieves 87.4 percent recall for slack-violating perturbations, and attains a Recall at 10 value of 0.90 for the most vulnerable routing resources.

0.38

Scalable AXI4 Transaction Monitoring for Mixed-Criticality SoCs: From Phase-Level Precision to ID-Level Efficiency

cs.AR ·2026-08-31 ·Chaoqun Liang, Thomas Benz, Alessandro Ottaviano, Michael Rogenmoser, Luca Benini +2 more
top venue similarity 0.58
Abstract

Mixed-criticality Systems-on-Chip (SoCs) with on-chip interconnects based on the AXI4 open standard protocol lack a protocol-level timeout mechanism, exposing systems to deadlocks and missed real-time deadlines when subordinate devices or managers fail or stall due to hardware faults, radiation-induced upsets, or software errors. This work presents a configurable hardware intellectual property (IP), non-intrusive in fault-free operation, that detects AXI4 protocol violations and timing faults at runtime and restores interconnect liveness through a cut-and- drain isolation mechanism. To address the fundamental trade-off between monitoring granularity and area cost, we introduce three designs at decreasing monitoring granularity: Phase-Level Track-ing (PLT), which provides cycle-accurate fault localization across individual protocol phases; Channel-Level Tracking (CLT), which coalesces per-phase monitors into channel-level supervision; and ID-Level Tracking (ILT), which achieves sub-linear area scaling by monitoring only per-ID transaction boundaries. Synthesized in GlobalFoundries 12 nm technology, CLT reduces area by 36.7% relative to PLT while preserving worst-case detection bounds at a minimal detection latency overhead, whereas ILT achieves an 89.2% area reduction suitable for tightly constrained deployments at the cost of a 3.7x higher median detection latency with coarser fault localization. Fault injection campaigns on a RISC-V SoC across 1.2 million scenarios confirm that no fault manifesting as an AXI4 protocol or liveness violation escaped detection, with observed detection latencies consistently bounded by theoretical worst-case predictions.

0.41

Assessing Triple Modular Redundancy for Wide-Link, Low-Latency NoC Routers: Reliability and Physical Design Challenges

cs.AR ·2026-08-21 ·Chen Wu, Michael Rogenmoser, Luca Benini, Angelo Garofalo
publishedbenchmark similarity 0.58
Abstract · 6 pages, 8 figures, 1 table. Accepted at the 2026 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Syst…

Protecting the Network-on-Chip (NoC) of physical-AI tile-based accelerators deployed in harsh environments against single-event effects (SEEs) is paramount for preventing NoC failures that can lead to deadlocks and silent data corruption (SDC). Prior work on reliable NoCs has largely focused on narrow links (e.g., 32-bit), deeply pipelined routers, and single-event upsets (SEUs). However, the state of the art has evolved toward low-latency NoC routers with ultra-wide links, implemented on advanced technology nodes and operating at frequencies above 1 GHz. We evaluate the cost and reliability trade-offs of implementing Triple Modular Redundancy (TMR) at three granularities (coarse, state-only, and full) for a 2-cycle-latency NoC router with 512-bit wide links. We carry out RTL-to-GDSII physical design in TSMC 7nm technology, as well as both RTL- and netlist-level SEU and SET fault injection campaigns. We evaluate the three TMR approaches in terms of reliability, cost, and physical design strategies, further extending the assessment from a standalone router to a full AI acceleration tile. Our results show that state-only and coarse-grained TMR do not provide sufficient protection against SEEs, whereas full TMR eliminates all observed failures across more than one million injected faults per experiment. Although the standalone full-TMR router incurs a 7.04x area overhead, this cost is drastically amortized once integrated into a complete AI accelerator tile with processors and local L1 memories: the same design adds only 16.8% area and 15.2% power consumption under a GEMM benchmark at the system level, with the critical path of the tile entirely unaffected. These results demonstrate that advanced technology nodes provide sufficient routing capacity to make full TMR a practical and deployable solution for protecting NoCs in Physical AI systems operating in harsh environments.

0.37

FIREQ: FPGA Instrumentation for Readout and Qubit control

eess.SY quant-ph ·2026-08-29 ·Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone +6 more
code/data similarity 0.53
Abstract · 15 pages, 9 figures

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

0.35

Completion-Path Credits: Multi-Resource Control for Scale-Up Fabrics

cs.NI ·2026-08-18 ·Fan Yang, Jiaqi Liu, Tao Jiang, Zhan Wang
similarity 0.52
Abstract · 10 pages, 5 figures

Scale-up fabrics connecting GPUs and AI accelerators carry tensor transfers together with remote reads, writes, atomics, and notifications over shared target-side receiver resources. Byte-denominated credits protect link buffers and streaming HBM traffic, but poorly represent small operations dominated by Atomic execution or response injection. This paper presents SemaCredit, a receiver controller that admits each remote-memory operation against a vector of target-resource demands and returns each component when its corresponding HBM, Atomic, or response stage completes. In a deterministic event simulator with multipath queues, eight HBM partitions, a serialized Atomic engine, and a response engine, SemaCredit matches a strong per-resource byte baseline on HBM-hotspot traffic while reducing small-operation P99 latency by 52.4% under Atomic contention and 10.2% under response incast. Application-shaped mixes show 57.7% and 14.5% P99 latency improvements for AllReduce-shaped and remote-read-shaped traffic while matching byte credits on HBM-dominated MoE traffic.

0.12