CS Paper Radar

SEU Hardened Multi-Context Spintronic FPGA

Abdolah Amirany, HamidReza Imani, Samuel Farid, Tarek El-Ghazawi

cs.ET ·submitted 2026-11-05 21:37 UTC · v2
benchmark

Abstract

Due to susceptibility to radiation-induced soft errors and resource constraints implementing large and complex designs on field programmable gate arrays (FPGAs) in harsh environments is challenging. Therefore, to mitigate these issues, this paper proposes an innovative approach through the introduction of a single event upset (SEU)-hardened spintronic FPGA architecture that incorporates multi-context capabilities. Leveraging the non-volatile properties of magnetic tunnel junction (MTJ), the proposed design can store two/four distinct configurations internally, eliminating the dependence on external non-volatile memory which significantly boosts the system performance. Additionally, through post-layout simulation, we demonstrate our design immunity to SEU, which enhances its reliability and operational stability in environments susceptible to radiation-induced soft errors. The efficiency of the proposed design was also evaluated using the ROSSETA benchmark, which serves as a representative model for real-world FPGA applications.

Closest papers

Nearest neighbours by meaning across the whole index.

From Routing Delay Shifts to Silent Data Corruption: Neutron-Induced SEU Effects in AXI-Based Zynq UltraScale+ MPSoCs

eess.SY cs.ARcs.ETphysics.acc-ph+1 ·2026-09-24 ·Mostafa Darvishi
benchmark similarity 0.60
Abstract · 23 pages, 14 figures, 3 tables

SRAM-based FPGA system-on-chip devices are vulnerable to single-event upsets (SEUs) in configuration memory, which may perturb programmable routing resources and degrade communication fabrics. In modern Zynq UltraScale+ MPSoCs, such routing disturbances can introduce small propagation delay shifts that remain logically transparent yet compromise AXI-based data transfers and lead to silent data corruption. Although routing delay degradation and AXI interconnect failures have been studied independently, their experimental correlation under neutron irradiation has not been established. This work presents a cross-layer investigation on a ZCU104 platform integrating routing-dominated delay sensors with an AXI interconnect benchmark comprising replicated accelerators. Neutron irradiation experiments were conducted on the fully operational system, while a frame-level configuration fault injector implemented via the internal configuration access port enables controlled upset emulation. Measured routing delay events are statistically correlated with communication failures, and cross-sections for both timing shifts and AXI malfunctions are derived. The results experimentally demonstrate how neutron-induced routing perturbations propagate into system-level silent data corruption in UltraScale+ MPSoCs, providing insight for resilience-oriented AXI-based design in neutron-rich environments.

0.32

FALCON: Fault-Tolerant Magnetic Tunnel Junction-Based In-Memory Stochastic Architecture for Reliability-Critical Edge AI Applications

cs.ET cs.AReess.IV ·2026-09-01 ·Farzad Razi, Mehran Moghadam, Sercan Aygun, M. Hassan Najafi, Marc Riedel
similarity 0.59
Abstract

As modern data-centric applications such as neural inference and sensor-edge analytics expand, they increasingly encounter the von Neumann memory wall, suffering from excessive data movement overhead and stringent energy constraints. In-Memory Computing (IMC) utilizing emerging non-volatile technologies, such as Magnetic Tunnel Junctions (MTJs), promises to mitigate these bottlenecks. However, conventional binary radix-based IMC architectures suffer from excessive vulnerability to process-induced variations, restricted operating margins, and thermal noise. To bridge the gap between energy efficiency and computational reliability, this work proposes FALCON, a fault-tolerant, MTJ-based in-memory arithmetic architecture integrated with Stochastic Computing (SC). By encoding numerical values into uniform bit-streams, SC naturally absorbs localized soft errors and enables the execution of an essential suite of arithmetic operations using highly compact logic primitives directly within the memory arrays. FALCON integrates a deterministic bit mapping mechanism with reconfigurable logic-in-memory (LIM) structures, eliminating the need to transfer data to external processors or area- and power-hungry random number generators. Experimental results using 14 nm FinFET technology validate the correct functionality of FALCON even under aggressive voltage scaling, severe process variation, and noise injection levels up to 30%, making it a robust framework for reliability-critical edge AI applications. We investigate the proper functionality of FALCON on morphological closing as a realistic noise-tolerant image processing case study.

0.36

Vulnerability-Weighted Routing of Timing-Critical Nets for Configuration-Upset-Resilient SRAM-Based FPGAs

eess.SY cs.ARcs.ETcs.PF+1 ·2026-09-24 ·Mostafa Darvishi
similarity 0.54
Abstract · 13 pages, 5 figures, 3 tables

Conventional FPGA routing optimizes timing, congestion, and routability but does not distinguish routes with similar nominal performance and substantially different susceptibility to configuration-induced delay degradation. This paper presents a vulnerability-weighted routing methodology for SRAM-based field-programmable gate arrays (FPGAs) that incorporates predicted routing-fault severity directly into the routing objective. A continuous vulnerability cost relates delay perturbations caused by electrically attachable dormant routing resources to the available downstream timing slack, while a complementary configuration-concentration term discourages excessive localization of vulnerable resources. To limit implementation disruption, only the highest-risk nets are selectively ripped up and rerouted while unaffected routes remain fixed. The method is implemented on a Zynq UltraScale+ XCZU7EV using a Vivado/RapidWright-based flow and evaluated across four routed benchmarks against commercial timing-driven routing, vulnerability-agnostic rerouting, and binary vulnerable-resource avoidance. Controlled configuration-equivalent perturbations provide hardware-level validation. The proposed method reduces aggregate configuration-induced timing vulnerability by 41.7% with approximately 1.0% nominal timing degradation and captures 85.8% of the vulnerability reduction obtained at the expanded routing budget by rerouting only the highest-risk 5% of eligible nets. The results demonstrate that continuous vulnerability information can improve configuration-upset resilience with limited impact on nominal routing quality.

0.40

Application Agnostic EM Side-Channel Emanations of the FPGA Clock Distribution Network

cs.CR ·2026-09-27 ·Ashish Sharma, Alia Long, Keith D. Mecham, Ioannis Savidis
similarity 0.53
Abstract · 8 pages, 8 figures, 4 tables, conference

Electromagnetic side channels have been extensively utilized in non-invasive attacks or analyses to extract critical information from deployed systems. Most of the attacks or analyses are typically executed on cryptographic algorithms under the assumption that the underlying implementation remains fixed. The assumption is valid in the context of fixed hardware, where modifications to the circuit are not made after manufacturing. However, in the case of adaptive hardware, including field-programmable gate arrays (FPGAs), the assumption no longer holds as modifications to the configuration of the array are permitted post-manufacturing. Consequently, this study introduces a methodology for the analysis of electromagnetic side channels of an FPGA through the study of deterministic finite state machines (DFSMs), where the effects of placement, routing, and operating frequency on the EM emanations of the FPGA due to the utilized clocking resources are characterized. To analyze the impact of frequency, device placement, and resource allocation on the EM emanations from the FPGA, statistical analysis including mean difference and variance difference calculations of measured EM fields were utilized to identify points of high EM activity on a set grid of sampled points. A 1.32x increase in flagged grid points was observed in the analysis of the mean difference when the percentage of utilized clock resources was increased from 25% to 90%. Similarly, a 1.39x increase in flagged grid points was observed when the variance difference was calculated for the same increase in clock resources.

0.31

Programming AMD XDNA NPUs with Open-source Compiler Tools: A FlashAttention Case Study

cs.AR cs.LG ·2026-09-18 ·Erwei Wang, Ephrem Wu, Victor J. B. Jung, Jiajie Li, Andre Rosti +2 more
code/data similarity 0.51
Abstract

Spatial NPUs such as AMD XDNA place compute tiles beside small local memories and leave data movement between them to software. Mapping a multi-stage workload onto such a device is largely a question of where the intermediate tensors live. We report what we learned making those choices for FlashAttention with the open-source IRON and MLIR-AIR flows. We compare four reference designs on XDNA 1 and XDNA 2: one runs each operator separately, two stream between operators on chip, and one fuses all three attention stages into a single kernel. The fused kernel holds the $\boldsymbol{QK}^{\mathsf T}$ scores in compute-tile local memory and reduces partial results over the cascade interconnect, so the scores never return to shared MemTile memory. On XDNA 2, it reaches 3.62 TFLOP/s over complete end-to-end execution, twice the IRON design, with 5.3 to 7.2 times the energy efficiency of the integrated GPU on the same chip at 2K tokens and above. It covers twelve LLM configurations, from BERT to DeepSeek, up to 128K tokens. Roofline analysis at each memory level explains this result and shows when to stop. XDNA 1 has lower ridge points, so streaming on chip already reaches the compute-bound regime: the same fusion that doubles throughput on XDNA 2 is nearly wasted on XDNA 1. Comparing a mapping's operational intensity against each level's ridge point predicts which case applies before writing any code. Fuse until the mapping clears that ridge point, then stop. We release the reference designs as maintained open source.

0.33

CHERI under Fault Injection: An Emulation-Based Security Evaluation of Capability Hardware Enhanced RISC Instructions

cs.CR cs.AR ·2026-11-15 ·Eva Sophia Schreyer
similarity 0.51
Abstract · Submitted to KTH Royal Institute on Technology as a Master Thesis

Memory-safety vulnerabilities continue to dominate real-world exploit chains despite decades of research into software mitigations. CHERI is a hardware architecture that enforces spatial and temporal memory safety by augmenting pointers with hardware-checked metadata, thus preventing software-based exploitation, but its threat model explicitly excludes fault injection. This thesis investigates whether targeted fault injection can undermine CHERI's memory-safety guarantees in a pure-capability CHERI-RISC-V environment. Two fault classes are considered: bit flips corrupting capability metadata, and fault-induced check skipping on capability store instructions. We implement fault injection primitives in a QEMU-based emulation environment, which enables deterministic, repeatable experiments without specialised hardware. With them, we demonstrate four attack scenarios: buffer overflows, control-flow hijacking, data-only attacks, and use-after-free. Each succeeds with one or two targeted faults (lower bounds under the emulation-based setting). Check skipping offers an alternative route to control-flow hijacking and data-only attacks, with a minimum of one fault. These results show that CHERI's guarantees depend on the physical integrity of capability metadata, the uninterrupted execution of metadata checks, and the integrity of the revocation bitmap: a single targeted fault can circumvent spatial safety, temporal safety, or control-flow integrity. CHERI still raises the cost of exploitation, since fault injection is a prerequisite for every attack and the sentry mechanism forces an attacker to supply a valid tagged capability or spend a second fault restoring the tag. Based on these findings, we propose mitigations: ECC-protected capability memory, capability field authentication codes, redundant execution of security-critical checks, and revocation bitmap integrity verification.

0.29

Bottom-Up FPGA Reconfigurable Accelerator Overlay Generation

cs.AR ·2026-11-18 ·Mohamed Bouaziz, Suhaib A. Fahmy
similarity 0.51
Abstract

Programmable FPGA overlays run new workloads without re-synthesis, yet they pay twice. An overlay adds a second layer of programmability on top of the FPGA's own overhead. Moreover, overlay generators usually start from a regular template, so they spend logic on switches and links that the workloads never use, and they close timing at low clocks. We present a flow that instead grows an overlay bottom-up from the dataflow graphs of the workloads it must run. The flow clusters workloads by structural similarity, ranks shared slots with spectral descriptors of each operation's surroundings, and adds only the units and links a workload lacks. It builds every unit on native hard blocks, with their internal pipeline registers, dual-ported memories and double-pumped DSPs, and it uses fixed-function engines where wider data types exceed the overlay's 16-bit lanes. Workloads then switch by configuration alone. On an AMD VCK5000, across 17 workloads from three suites and against OverGen rebuilt for the same board, our images run at 250-400 MHz instead of 35-50 MHz. As a result, they are 9.52-10.33x faster in geometric mean, and up to 36.97x, while using 19.4-22.1x less of the FPGA and 9.67-10.51x less estimated board energy.

0.18

GPU-Accelerated Gate-Level Time-Based Power Analysis via Event-Density-Aware Partitioning and Kernel Fusion

cs.AR ·2026-09-05 ·Weihao Wang, Yikang Ouyang, Hongyuan Liu, Yuzhe Ma
top venue similarity 0.51
Abstract · Accepted for publication in ACM Transactions on Architecture and Code Optimization (TACO)

Power analysis is crucial in modern chip design flow. Particularly, time-based power analysis can provide fine-grained power consumption information to facilitate the diagnosis of power issues and guide power optimization accordingly. However, it may take tens of hours to conduct time-based power analysis on modern large-scale circuits, which greatly slows down the power optimization flow. In this paper, we present the first GPU-accelerated gate-level time-based power analysis framework. We propose a novel data structure to enable efficient state-dependent power retrieval. To accommodate the imbalanced event distribution across gates, we propose an event-density-aware partitioning strategy that allocates GPU threads based on gate event density. Finally, we fuse the power computation into a single kernel invocation to reduce redundant work in separate kernels. Experimental results show that our proposed framework achieves high accuracy while delivering up to 37.63x end-to-end speedup compared to multi-threaded Synopsys PrimeTime PX.

0.36