CS Paper Radar

Programming AMD XDNA NPUs with Open-source Compiler Tools: A FlashAttention Case Study

Erwei Wang, Ephrem Wu, Victor J. B. Jung, Jiajie Li, Andre Rosti, Joseph Melber, Samuel Bayliss

cs.AR cs.LG ·submitted 2026-09-18 03:22 UTC · v1
code/data

Abstract

Spatial NPUs such as AMD XDNA place compute tiles beside small local memories and leave data movement between them to software. Mapping a multi-stage workload onto such a device is largely a question of where the intermediate tensors live. We report what we learned making those choices for FlashAttention with the open-source IRON and MLIR-AIR flows. We compare four reference designs on XDNA 1 and XDNA 2: one runs each operator separately, two stream between operators on chip, and one fuses all three attention stages into a single kernel. The fused kernel holds the $\boldsymbol{QK}^{\mathsf T}$ scores in compute-tile local memory and reduces partial results over the cascade interconnect, so the scores never return to shared MemTile memory. On XDNA 2, it reaches 3.62 TFLOP/s over complete end-to-end execution, twice the IRON design, with 5.3 to 7.2 times the energy efficiency of the integrated GPU on the same chip at 2K tokens and above. It covers twelve LLM configurations, from BERT to DeepSeek, up to 128K tokens. Roofline analysis at each memory level explains this result and shows when to stop. XDNA 1 has lower ridge points, so streaming on chip already reaches the compute-bound regime: the same fusion that doubles throughput on XDNA 2 is nearly wasted on XDNA 1. Comparing a mapping's operational intensity against each level's ridge point predicts which case applies before writing any code. Fuse until the mapping clears that ridge point, then stop. We release the reference designs as maintained open source.

Closest papers

Nearest neighbours by meaning across the whole index.

Starscream: Reimagining LLM Sharding on AMD Instinct GPUs with GPU Partitioning

cs.DC cs.ARcs.LG ·2026-11-11 ·Sumanth Gudaparthi, Smeet Chheda, Ganesh Dasika
similarity 0.65
Abstract

As GPU accelerators grow larger to meet rising compute demands, they exhibit increasingly pronounced non-uniform memory access (NUMA) characteristics that challenge existing LLM frameworks. Chiplet-based architectures provide a practical path to larger GPUs while mitigating manufacturing yield constraints. Modern GPUs such as AMD Instinct MI300X employs such a multi-die design, and further offer GPU partitioning capabilities, partitioning a single physical GPU into multiple logical devices with NUMA-aware memory domains, promising faster kernel launches, and reduced memory access latencies with improved locality. However, current parallelization strategies, designed for homogeneous GPU topologies, when applied under partitioning, extend its unidimensional sharding causing significant performance degradation. Three bottlenecks emerge: (1) memory redundancy; (2) arithmetic intensity collapse; (3) communication overhead from flat collectives. We present Starscream, a rethinking of LLM sharding for the chiplet era. Rather than stretching inter-GPU sharding thinner, Starscream adds intra-GPU sharding along an orthogonal dimension, grounded in three foundational principles: kernel shape preservation, memory redundancy elimination, and communication overhead minimization. These principles form the basis for extending any sharding strategy into the partitioning regime. We demonstrate their effectiveness using tensor parallelism as a case study. On AMD MI300X and MI355X, exploiting partitioning capabilities yields up to 4x speedup for attention and 1.43x for fused GEMMs compared to chiplet-oblivious baselines, demonstrating the effectiveness of chiplet-aware designs. Starscream's principles generalize across sharding strategies and future architectures.

0.21

NVIDIA Vera: A Microarchitecture-Level Comparison with Grace, Turin, and Granite Rapids

cs.DC cs.ARcs.PF ·2026-11-11 ·Joseph Moore, Thomas Green, Simon McIntosh-Smith
published similarity 0.65
Abstract · Accepted at PMBS26 (SC26 Workshops). 9 pages + 3-page artifact description, 11 figures, 1 table. Corrects a typo in Sec. IV-B relative to th…

The majority of new HPC systems are centered around NVIDIA, AMD, or Intel CPUs. Vera is NVIDIA's latest data-center CPU, including its first custom data-center core design, Olympus. This paper investigates Vera in comparison to AMD Turin and Intel Granite Rapids, using NVIDIA Grace as a baseline. We navigate up the performance ladder, from microbenchmarks that isolate performance metrics, through NAS kernels and miniapps, to single-socket performance of a range of scientific codes. We find that Vera achieves the best performance of the architectures evaluated in most codes tested, and that this gain is primarily attributed to its high memory bandwidth, effective Spatial Multithreading implementation, and low-latency memory subsystem aided by the architecture's predictive structures. While Vera represents a major leap over its predecessor, we show that its comparatively modest floating-point performance trails Intel and AMD in a small number of compute-bound workloads reflecting NVIDIA's GPU focus for such workloads.

0.38

HiNa-MoE: High-Performance, Non-Intrusive MoE Inference on CPUs with Matrix Engines

cs.DC ·2026-10-04 ·Weiling Yang, Junwen Zhang, Dezun Dong, Jianbin Fang, Enda Yu +2 more
published similarity 0.64
Abstract · Accepted by PACT 2026

Mixture-of-Experts (MoE) inference is increasingly deployed in local and on-premise environments, where expert parameters often exceed GPU memory capacity. In latency-sensitive, low-concurrency settings, repeatedly staging routed-expert weights from CPU memory to the GPU can be prohibitive, leaving routed-expert feed-forward networks (FFNs) on the critical path of multi-socket CPUs. Existing CPU accelerations often rely on intrusive, hardware- or topology-specific requirements, such as AMX-specific weight layouts or manual NUMA-aware placement. These requirements reduce portability and complicate integration with standard CPU-GPU offloading pipelines. We present HiNa-MoE, a high-performance, non-intrusive operator library for MoE inference on CPUs with Intel AMX. HiNa-MoE (1) exploits AMX with an optimized micro-kernel that keeps expert weights in standard layouts and instead fuses lightweight layout transforms into token gathering and stores; (2) applies NUMA-aware task partitioning under a simple page-interleaved policy without modifying the framework allocator; and (3) converts decode-phase memory matrix-vector operations into small matrix-matrix execution to utilize AMX. Across multiple MoE models, HiNa-MoE achieves up to 3.37x speedup for FFN kernels and up to 2.09x end-to-end inference speedup over state-of-the-art baselines, while remaining plug-and-play with existing frameworks and deployment workflows.

0.26

Investigating ET-SoC-1 Vector and Parallel Performance with sGEMM

cs.DC ·2026-10-31 ·Richard Neale, Nick Brown
publishedbenchmark similarity 0.64
Abstract · Author accepted version of paper published in RISC-V for HPC workshop at SC26

The Ainekko (formerly Esperanto) ET-SoC-1 is a massively parallel RISC-V accelerator. Its compute array comprises 1024 dual-threaded in-order ET-Minion cores (2048 harts) operating at 600 MHz, each core providing an eight-lane 256-bit packed-single (PS) SIMD datapath shared by its two harts, with access to LPDDR4X memory at a nominal 133 GiB/s. This paper presents a performance investigation using single-precision general matrix multiplication (sGEMM) as the benchmark kernel. Two device kernels are implemented and evaluated on the ET-SoC-1, these are a register-blocked PS SIMD baseline with two-step software pipelining, and a TensorFMA32 kernel that drives the same FMA datapath through the per-core tensor micro-operation sequencer, with double-buffered A scratchpad loading. Because both kernels are bounded by the same arithmetic peak, the comparison isolates the effect of operand delivery from that of arithmetic width. Performance is compared against CPU references (SpacemiT K3, Intel i5-11600, AMD Ryzen 9 9950X and the Arm Cortex-X925/A725 CPU of an NVIDIA DGX Spark) and two GPUs (NVIDIA GB10 Blackwell and AMD RDNA4 RX 9060 XT).

0.36

Format-Aware Fusion for Fast FP4 Pretraining

cs.LG ·2026-09-04 ·Robert Hu
similarity 0.63
Abstract

Four-bit floating-point (FP4) Tensor Cores accelerate matrix multiplication, but scale computation, operand packing, layout construction, and saved backward state can erase the gain. We present \emph{format-aware fusion}, which co-designs each quantization producer with its scale domain and consumer layout for native \mxfp{}, global \nvfp{}, and cooperative-thread-array-local \nvfp{}. We evaluate Llama-3-family 8B pretraining through 160 billion tokens using bfloat16 output projections and compiled cross entropy. In matched same-accelerator probes, bfloat16 and Transformer Engine \nvfp{} reach 18.8K and 27.6K tokens/s/GPU, while our fastest custom route reaches 37.9K. \mxfp{} with row-gradient stochastic rounding and fixed-sign 32-value Hadamard weight-gradient preconditioning reaches 37.2K tokens/s/GPU (86.3\% bfloat16 model FLOP utilization) and ends 2.11\% above the raw bfloat16 training-loss endpoint. A Transformer Engine recipe with four final bfloat16 blocks ends 0.87\% above bfloat16 at 27.1K tokens/s/GPU. Downstream rankings differ from training-loss rankings, showing that FP4 outcomes depend jointly on scale contract, operand, and execution path.

0.13

FLINT: Efficiently Leveraging High Bandwidth Flash for Capacity-Scalable LLM Inference Acceleration

cs.AR cs.AIcs.DC ·2026-08-25 ·Geraldo F. Oliveira, Arash Tavakkol, Xiangyu Zhu, Ahmet Caner Yüzügüler, Vamanan Arulchelvan +8 more
highly cited similarity 0.63
Abstract

LLM inference is increasingly constrained by accelerator memory capacity rather than compute throughput. This constraint is especially acute in single-accelerator and small-node inference systems, where limited on-package memory capacity restricts the size of deployable models. HBF is an emerging 3D-stacked NAND flash technology that provides multi-terabyte near-accelerator capacity, making it a promising capacity tier for storing LLM weights. However, existing HBF-based proposals face three adoption challenges: they (1) rely on coarse-grained static prefetching for LLM weights aiming to hide the microsecond-level read latency of the NAND flash device while maximizing HBF's read throughput, (2) expose NAND flash management tasks (e.g., refresh operations) to the accelerator-visible critical inference path, and (3) miss optimization opportunities to specialize and optimize the flash-management mechanisms to the workload behavior. Our goal is to design an efficient HBF substrate that integrates HBF as a memory-capacity tier alongside HBM while addressing these three challenges. To this end, we propose FLINT, a workload-driven HBF substrate for capacity-scalable LLM inference. FLINT introduces three mechanisms: (1) a hardware burst-buffer controller that dynamically coalesces and pipelines HBF reads aiming to utilize existing NAND flash buffers while sustaining high HBF bandwidth, (2) a phantom-plane refresh mechanism, which removes refresh from the critical inference path by moving refresh-related NAND flash operations outside the read foreground back via low-cost resource duplication, and (3) a read-only FTL, which replaces SSD-class support for arbitrary writes with a compact table that translates logical weight bursts to physical HBF locations.

0.29

ZipFusion: Fusing Lossless KV Decompression with Attention for Efficient LLM Decoding

cs.AR cs.DC ·2026-10-24 ·Yuetao Chen, Peng Wang, Hong Xu
similarity 0.63
Abstract

The key-value (KV) cache places growing demands on GPU memory capacity and bandwidth as large language models serve longer contexts and more concurrent requests. Its footprint limits concurrency, while repeated KV reads during attention can make decoding memory-bandwidth bound. Prior lossless KV cache compression methods reduce transfers between devices but restore the uncompressed KV cache in GPU memory before attention. They therefore leave these repeated KV reads unchanged and require additional work and memory for decompression. We present ZipFusion, which enables attention to consume the losslessly compressed KV cache directly. ZipFusion co-designs the compression format and attention kernel to reduce the bytes read from GPU memory during attention. The kernel reconstructs the original values directly in registers using simple bit operations, avoiding a separate decompression pass and easing the memory-bandwidth bound. ZipFusion also reassigns memory freed by compression across layers to store additional KV cache. Its memory manager reserves space for ongoing generation and makes the remaining capacity available to new requests. We implement ZipFusion on top of FlashInfer and integrate it with SGLang. On an NVIDIA H100, ZipFusion achieves about 1.25x speedup over FlashInfer in decode attention. With 8K context, it improves model decode throughput by up to 26.3% over uncompressed SGLang under the same GPU memory budget. At each method's largest supported batch, it also delivers up to 2.76x the throughput of the best-performing lossless KV cache compression baseline.

0.09

AttnFuse: A Composable DSL for Compiling Attentions to Fused GPU Kernels

cs.LG ·2026-09-11 ·Varun Kumar Dasoju, Tian Zhao
similarity 0.63
Abstract

Modern AI systems are built on the Transformer architecture, whose core operation, attention, accounts for the majority of computation and memory cost. Researchers continually propose new attention variants to improve quality, efficiency, or context length, but each variant currently requires expert-written GPU code to run at usable speeds. PyTorch's recent flex\_attention lets researchers describe custom attention patterns in Python and compile them to fused kernels, but its design is limited to modifications applied after the central matrix multiplication, excluding Rotary Position Embedding (RoPE), the positional encoding used by every major LLM. We introduce AttnFuse, a small DSL for attention that makes pre-multiplication transformations like RoPE first-class operations. Researchers compose ten high-level building blocks to describe a variant, and AttnFuse's compiler emits a single fused GPU kernel for the entire computation. On an RTX 3090, AttnFuse achieves a 2.10$\times$ speedup over flex\_attention on the RoPE+causal pattern. On an H100, it runs a full Llama-3-8B training step within 5\% of PyTorch's hand-tuned backend. Our investigation reveals the Rotation Calculus: whether to fuse RoPE or apply it separately depends on the GPU's compute-to-bandwidth ratio, with a derived crossover that matches measurement. AttnFuse demonstrates that a small, attention-specific compiler can close the gap between flexible research code and production kernels.

0.21