CS Paper Radar

NVIDIA Vera: A Microarchitecture-Level Comparison with Grace, Turin, and Granite Rapids

Joseph Moore, Thomas Green, Simon McIntosh-Smith

cs.DC cs.ARcs.PF ·submitted 2026-11-11 19:19 UTC · v1
published

Abstract

The majority of new HPC systems are centered around NVIDIA, AMD, or Intel CPUs. Vera is NVIDIA's latest data-center CPU, including its first custom data-center core design, Olympus. This paper investigates Vera in comparison to AMD Turin and Intel Granite Rapids, using NVIDIA Grace as a baseline. We navigate up the performance ladder, from microbenchmarks that isolate performance metrics, through NAS kernels and miniapps, to single-socket performance of a range of scientific codes. We find that Vera achieves the best performance of the architectures evaluated in most codes tested, and that this gain is primarily attributed to its high memory bandwidth, effective Spatial Multithreading implementation, and low-latency memory subsystem aided by the architecture's predictive structures. While Vera represents a major leap over its predecessor, we show that its comparatively modest floating-point performance trails Intel and AMD in a small number of compute-bound workloads reflecting NVIDIA's GPU focus for such workloads.

Comment
Accepted at PMBS26 (SC26 Workshops). 9 pages + 3-page artifact description, 11 figures, 1 table. Corrects a typo in Sec. IV-B relative to the proceedings version

Closest papers

Nearest neighbours by meaning across the whole index.

Uncovering the Memory Hierarchy of Modern NVIDIA GPUs for Accurate Simulation

cs.AR ·2026-11-10 ·Ziwen Wang, Jiapeng Zhou, Changxi Liu, Dongsheng Wang, Yun Chen
similarity 0.73
Abstract · 14 pages, 8 figures, 6 tables

Emerging artificial intelligence workloads, particularly Large Language Models (LLMs), place unprecedented demands on GPU memory systems. Consequently, architectural innovations increasingly target the memory system to alleviate these bottlenecks. However, existing works still rely on outdated memory hierarchy models that fail to capture the complexities of modern hardware. This fidelity gap leads to inaccurate characterization and could misguide optimization strategies. To bridge this gap, we present GemAtlas, the first systematic reverse engineering of the memory hierarchy in modern NVIDIA GPUs. By developing fine-grained SASS-level benchmarking, we expose critical, previously undocumented micro-architectural details across different cache levels, including cache set associativity, slice-routing and set-indexing hash functions, replacement policies, coherence behavior, and interconnect topologies. We integrate these discovered micro-architecture details into the state-of-the-art GPU simulation framework. The final results demonstrate that GemAtlas reduces the mean absolute percentage error (MAPE) from 31.69% to 22.24% on average across four GPUs. Specifically, GemAtlas reduces the MAPE from 34.04% to 23.98% for real-world LLM operators.

0.25

Characterizing CUDA Locality Domains on Blackwell GPUs

cs.DC ·2026-11-05 ·Rocky Wang, Joyce Zhou, Keith Jiang, Jason Zhao
similarity 0.73
Abstract

Low latency is critical to user experience. As NVIDIA Blackwell and Rubin GPUs advance multi-die scaling, data placement and cross-die communication become increasingly important. However, the latency implications and underlying costs of cross-die communication and die-aware execution remain largely unexplored. In this report, we present a comprehensive evaluation of the Locality Domain (LD) feature introduced in CUDA 13.4. Conducted on a single node equipped with eight NVIDIA B300 GPUs, our study examines three aspects: memory management and access, computation, and communication, to identify the sources of latency and, more importantly, explore how LD can mitigate them. Our measurements show that the benefits of LD depend on data access patterns. Through die-aware adaptations and integration with widely used libraries and tools, we achieve speedups of up to 43.5% for NCCL 2.32.3 (AllGather), 111.3% for nvbandwidth (DtoD), and 37% for DeepGEMM (EP). We also identify non-negligible LD-related GPU memory allocation overhead when allocation sizes exceed 32 MB due to barrier and TLB invalidation, we propose a fix to the GPU driver kernel module (submitted to NVIDIA) and show that overhead could be reduced 7x ~ 10x without requiring any user-code changes.

0.20

Toward Open ISA Supercomputing: A Comparative Study of RISC-V, Arm, and x86 Architectures on HPC Workloads

cs.DC cs.ARcs.PF ·2026-10-23 ·Emanuele Venieri, Giacomo Madella, Gabriele Ceccolini, Simone Manoni, Federico Ficarelli +7 more
code/data similarity 0.71
Abstract · Preprint submitted to Future Generation Computer Systems

RISC-V is emerging as a candidate architecture for high-performance computing (HPC), but its competitiveness against established x86 and Arm processors remains difficult to assess because existing studies use different platforms, workloads, and methodologies, and rarely consider energy efficiency. Our work provides an evaluation of contemporary HPC RISC-V, Arm, and x86 processors using a common software stack and methodology. We characterize the Sophgo SG2044 and compare it with the NVIDIA Grace CPU Superchip and Intel Xeon Platinum 8480+ across four HPC benchmarks (STREAM, HPL, HPL-MxP, and HPCG) and four representative applications (iPIC3D, PLUTO, OpenFOAM, and llama$.$cpp). The version of HPL-MxP linked to OpenBLAS built and used for this work is made available as open-source software. The SG2044 reaches 8.02 GFLOP/s of FP64 performance and 7.8 GB/s of memory bandwidth per core, increasing to 294 GFLOP/s and 107 GB/s at 64 cores. L2-cache-aware process placement enables near-linear scaling up to 16 cores, beyond which memory-bandwidth saturation limits further gains. Across generations of RISC-V hardware, in the context of the Monte Cimone (MC) project, the SG2044-based MCv3 doubles both single-core performance and peak memory bandwidth relative to MCv2, while improving memory bandwidth, node-level FP64 performance, and energy efficiency by approximately 100x, 158x, and 10x, over MCv1. Against the Arm and x86 systems, the SG2044 shows 8-15x less absolute performance, reflecting its narrower vector resources and less advanced technology node, but delivers competitive scaling and energy efficiency on several workloads. Its most notable result is LLM decode, where 64-core execution provides the highest relative scaling and energy efficiency among the evaluated platforms while exceeding Intel in throughput. Our results show that RISC-V processors are closing the gap with the competition.

0.23

Dissecting an Unexplored SASS Control-Code Field: Barrier Exemption and Programmable Warp Priority

cs.AR cs.DCcs.PF ·2026-11-18 ·Ziwen Wang, Qi Luo, Kunlin Li, Changxi Liu, Dongsheng Wang +1 more
similarity 0.70
Abstract · 7 pages, 6 figures, 3 tables

Every instruction in NVIDIA's native GPU ISA (SASS) carries a control code that guides hardware scheduling, and prior work has decoded its known fields to optimize GPU kernels. However, one control-code field remains unexplored: it appears over 500000 times in NVIDIA's closed-source libraries such as cuBLAS and cuDNN, yet nvcc never emits it when compiling user programs. This paper presents the first systematic study of this control-code field across GPU architectures from Volta to Blackwell. Using instruction-level microbenchmarks, we show that the field controls two independent hardware mechanisms: barrier exemption (EXEMPT), which allows instructions blocked by a pending barrier to issue early during the barrier wait, and programmable warp priority (START, TILE, and END), which moves warps across three priority levels in the hardware scheduler. We identify the conditions under which each mechanism improves GPU kernel performance and implement a post-compilation binary optimizer that places these marks directly in compiled binaries without modifying source code or the compiler. Evaluated across six GPUs spanning four architectures, our optimizations speed up representative kernels by up to 31.9%, and the optimizer accelerates production kernels in llama.cpp and vLLM by up to 5.4% and end-to-end LLM inference by up to 3.6%.

0.14

Understanding NVIDIA Grace-Blackwell Unified Memory Through Placement-Controlled Microbenchmarks

cs.DC ·2026-10-14 ·Nathan Graddon, Aaron Jarmusch, Sunita Chandrasekaran
similarity 0.70
Abstract

NVIDIA Grace--Blackwell systems make CPU--GPU memory increasingly unified at the programming level, but unified addressability does not make the memory system uniform. A CUDA managed allocation on GB200 may be served from GPU-local HBM, accessed through host/system memory, demand-migrated, prefetched, reused after GPU access, or evicted and reloaded under capacity pressure. The problem is that these states share a programming interface while exercising different hardware paths and runtime mechanisms, making a single ``Unified Memory bandwidth'' number misleading. This paper presents a placement-controlled microbenchmark study of CUDA Unified Memory on NVIDIA GB200, using GH200 as a Grace--Hopper baseline and GB10/DGX Spark as a validation platform. Our methodology separates local HBM access, host/system-memory access, explicit movement, managed first touch, prefetch, reuse, access-pattern sensitivity, oversubscription, and CPU--GPU handoff, then summarizes the observations with a measurement-calibrated model of compute, access, migration, eviction, synchronization, and handoff costs. On GB200, a 1~GB STREAM-style triad reaches 3963~GB/s from local HBM but 304~GB/s through host-mapped CPU/system memory; for a 256~MB streaming kernel, cold CPU-initialized managed memory reaches 14.1~GB/s, while managed prefetch and reuse reach 4606~GB/s and 4504~GB/s. Below the capacity boundary, prefetched and reused managed memory remain above 4.6~TB/s, but at 125\% of CUDA-visible memory they fall to 968~GB/s and 1214~GB/s, showing that Grace--Blackwell unified memory must be understood through placement, access history, locality, reuse, and capacity pressure.

0.18

Performance-Portable Exact Gaussian Process Regression in Python via SYCL and oneMath

cs.DC cs.LGcs.PF ·2026-11-12 ·Alexander Strack, Marcel Graf, Alexander Van Craen, Dirk Pflüger
publishedcode/datahot direction similarity 0.70
Abstract · 12 pages, 6 figures, 2 tables. Accepted at the WACCPD 2026 workshop (SC26 Workshops), November 15-20, 2026, Chicago, Illinois, USA

Modern multi-vendor GPU environments force a choice between portable code and native performance. GPRat is an open-source Python library for exact Gaussian process regression built on the HPX asynchronous many-task runtime, tiled algorithms, and CPU/CUDA BLAS backends. We contribute a UXL Foundation oneMath backend with a hybrid HPX/SYCL design, extending GPRat to AMD and Intel GPUs. The new SYCL backend comes within 3% of native CUDA on an NVIDIA A30 at the largest problem size and outperforms the GPflow and GPyTorch libraries by up to 1.75x and 2.17x on the A30 and up to 1.79x and 4.62x on an AMD Instinct MI210. On an Intel Arc B580, a consumer-class card with FP64 throughput below our CPUs, the unmodified SYCL backend trails GPRat's CPU backend. Overall, oneMath's dispatch to vendor-native BLAS lets a single SYCL codebase match CUDA on NVIDIA and outperform established Python GP frameworks on AMD, without vendor-specific code.

0.50

Matching Architecture to Workload: Comparing RISC-V Parallel Accelerators for Energy-Efficient Embedded Computing

cs.DC cs.AR ·2026-11-19 ·Luca Colombo, Luigi Ghionda, Amirhossein Kiamarzi, Yvan Tortorella, Riccardo Giunti +5 more
benchmarkcode/data similarity 0.69
Abstract · Preprint submitted to the Journal of Parallel and Distributed Computing

Embedded computing demands high performance and energy efficiency across workloads with widely different computational characteristics. Choosing the most suitable execution model therefore requires a quantitative understanding of how each model maps to different workload classes. In this paper, we compare three execution models for energy-efficient embedded computing: scalar multicore, stream ing multicore, and vector processing. We use three open-source RISC-V accelerators as representative implementations: the PULP Cluster, the Snitch Cluster, and Spatz, respectively. Their open-source hardware and software stacks enable a controlled comparison based on implementations in the same 12 nm technology and a common benchmark suite. Our results reveal that no single execution model performs best across all workload classes. Spatz delivers the greatest benefits for regular and highly vectorizable compute-intensive applications, achieving up to 4.29x higher performance and 5.17x greater energy efficiency than the other architectures. However, its effectiveness strongly depends on the availability of data-level parallelism and regular computation and memory-access patterns, making it the most sensitive to workload characteristics. The Snitch Cluster performs particularly well on applications with limited parallelism and streamable memory-access patterns, providing up to 5.53x higher performance and 1.45x greater energy efficiency. Conversely, the PULP Cluster is most effective on irregular and control-dominated applications, achieving improvements of up to 5.66x in performance and 2.80x in energy efficiency. Compared with Spatz, however, the greater flexibility offered by PULP and Snitch comes at a non-negligible cost in terms of both area and power.

0.30

Annotation-Driven Migration of CUDA Programs to Tenstorrent Blackhole

cs.DC ·2026-10-02 ·Ayumi Ohno, Shinya Takamaeda-Yamazaki
similarity 0.69
Abstract · Accepted at the Thirteenth Workshop on Accelerator Programming and Directives (WACCPD 2026)

Tenstorrent Blackhole combines distributed local memories, explicit inter-core communication, and Tensix cores decoupling data movement from computation. CUDA offers a substantial HPC software base but leaves physical data placement and scheduling largely implicit. Migrating CUDA HPC kernels to Blackhole requires spatial mapping across cores and per-core coordination of compute and data-movement kernels. We present an MLIR-based compiler deriving data placement, inter-core communication, and tile computation from a statically shaped affine CUDA subset. Declarative annotations express choices not fixed by the source, including compute/DM operation placement and streaming granularity. We evaluate it on Gaussian elimination, five-point stencil, and symmetric rank-k update. Relative to our compiler's default realizations, the best measured configurations achieve a 4.2x speedup for BF16 Gaussian and 2.1-2.2x for FP32 Gaussian and Jacobi. A choice's performance impact can reverse with surrounding policies, precision, and loop schedule, motivating comparison of alternative per-core realizations rather than independent policy selection.

0.24