CS Paper Radar

Correlation Analysis between Terrain Features and eLoran Spatial ASF according to DEM Spatial Resolution

Jaewon Yu, Pyo-Woong Son

eess.SP ·submitted 2026-10-01 04:17 UTC · v1

Abstract

The ASF is a major source of positioning error in eLoran system and is affected by terrain characteristics along the signal propagation path. This study analyzes the correlations between spatial ASF and path-based terrain features using NASA SRTM 30m and NGII 90m DEMs. Path mean elevation and path mean slope were extracted along the propagation paths from the Gwangju eLoran transmitter to measurement locations in the Incheon and Pyeongtaek port areas. The results show that both terrain features are strongly correlated with spatial ASF, with the higher-resolution NASA SRTM DEM generally exhibiting stronger correlations, particularly for path mean slope. These findings demonstrate the importance of DEM spatial resolution in terrain-based spatial ASF analysis and provide a basis for selecting terrain data for future machine-learning-based ASF prediction

Comment
submitted to ICCE-Asia 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Spatially explicit feature importance for building height estimation using research-access high-resolution SAR and optical sensors

cs.LG physics.soc-phstat.ML ·2026-08-18 ·Guilherme Iablonovski, Pierre-Louis Frison, Tatiana Silva da Silva
similarity 0.55
Abstract · 4 pages, 3 figures, intended for JURSE 2027

Accurate building height information at the individual footprint scale is essential for material stock accounting and post-disaster damage assessments yet remains difficult to obtain at city scale in the Global South where airborne LiDAR coverage is rare and commercial very high-resolution imagery is cost-prohibitive or unavailable. While recent works have demonstrated building height estimation using freely available Sentinel imagery, the resolution ceiling of resulting products is still coarse for material stock analysis. This study incorporates products derived from data freely accessible under scientific research licenses, TerraSAR-X StripMap and PlanetScope, alongside Sentinel-1 to predict building heights in a large city in Brazil. To account for the spatial autocorrelation in the training set, features from all sources are integrated in a geographically weighted random forest model, returning an RMSE of 5.34 m and R2 of 0.756 against a LiDAR reference dataset. Local feature importance showed predictor dominance to vary consistently across intra-urban contexts, with footprint geometry dominating for low-rise buildings, shadow-derived height for taller and more isolated structures, and spectral reflectance for the tallest buildings in the set. Sentinel-1 backscatter and InSAR occupy complementary spatial niches, with no single sensor uniformly preferable across the set. Results provide optioneering guidance and insight over satellite-derived products predictive relevance in distinct contexts, which global machine learning or neural network models cannot offer.

0.19

Efficient Continuous DEM Reconstruction under Limited Target-Resolution Supervision

cs.CV cs.LGeess.IV ·2026-09-24 ·Zekai Shi, Meng Zhang, Haokun Zhang, Bo Zhang
similarity 0.54
Abstract · 19 pages, 15 figures

High-resolution digital elevation models (DEMs) support Earth observation applications, but paired training references are often available only at coarser output resolutions. Reconstructing finer terrain grids therefore requires both effective transfer beyond the supervised scale and control of dense-query computation. To address this problem, SCOPE learns a continuous terrain representation from coarser-resolution pairs. It predicts a latent coefficient field on the low-resolution grid and reuses local Fourier residual functions through basis evaluation and geometry-guided ensemble fusion. This separates high-dimensional coefficient prediction from output-grid construction. Experiments on geographically distributed land--ocean samples assess supervised reconstruction, unseen-scale inference, cross-domain generalization, and theoretical computation. SCOPE leads the compared methods across six metrics in the main supervised-scale evaluation. At an unseen factor three times the training factor, land reconstruction reduces RMSE and MAE by approximately 12\% relative to bicubic interpolation, with errors close to target-scale fine-tuning. Ninefold output density increases counted multiply--accumulate operations by only about 2\%. Frozen-model validation on held-out external marine regions reduces RMSE relative to the DEM-specific implicit baseline EBCF-CDEM by approximately 19\% under self-downsampling and 2\% with cross-product inputs, while also yielding lower RMSE than LIIF-MS in both settings. These results demonstrate the value of reusable coefficient fields for accurate reconstruction beyond the supervised resolution with low incremental arithmetic cost.

0.22

LEO Signals-of-Opportunity for Navigation in Urban Environments: A GLRT-Assisted Off-Grid SBL Approach

cs.IT ·2026-10-06 ·Maedeh Sotoodenia, Mohammad Hossein Kahaei, Alireza Nezamalhosseini
similarity 0.52
Abstract · 11 pages, 5 figures

The vulnerability and unavailability of global navigation satellite system (GNSS) signals in dense urban environments have motivated the use of low earth orbit (LEO) signals of opportunity (SoOP) for positioning, navigation, and timing (PNT). However, multipath and non-ideal noise can significantly degrade delay--Doppler estimation and, consequently, navigation accuracy. This paper proposes a hybrid generalized likelihood ratio test (GLRT) and off-grid sparse Bayesian learning (SBL) framework for LEO-SoOP navigation under multipath and non-Gaussian, temporally correlated noise. First, a GLRT-based framework is developed, demonstrating reliable detection under ideal Gaussian noise but degraded estimation under heavy-tailed or colored noise and unresolved multipath. Next, an off-grid SBL framework is introduced for high-resolution separation and estimation of line-of-sight (LOS) delay--Doppler parameters. The estimated LOS parameters are subsequently tracked and incorporated into an extended Kalman filter (EKF) to obtain the navigation solution. Simulation results demonstrate that, in urban environments, the proposed method reduces delay RMSE by up to 77\% and position RMSE by 88.5\% compared with GLRT-based estimation. These results demonstrate the potential of the proposed framework for robust and accurate LEO-SoOP navigation.

0.28

Determining Vertical Displacement of Agricultural Areas Using UAV-Photogrammetry and a Heteroscedastic Deep Learning Model

cs.CV ·2026-09-30 ·Wojciech Gruszczyński, Edyta Puniach, Paweł Ćwiąkała, Wojciech Matwij
published similarity 0.51
Abstract

This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

0.45

Channel Knowledge Maps for FR3 UAV Base Stations: Dataset and ML-based Modeling

eess.SP ·2026-10-05 ·Guillem Moreno~Garcia, Sergi Abadal, Evgenii Vinogradov
published similarity 0.50
Abstract · 6 pages, accepted for IEEE Globecom'26 Workshops

This paper introduces a dense upper mid-band Frequency Range (FR3) Channel Knowledge Map (CKM) dataset for Uncrewed Aerial Vehicles (UAVs) with an on-board base station (UxNB). It contains 16,180 CKM samples from 3,236 urban locations in 66 cities at 7.125 GHz and UxNB heights of up to 500 meters. Every 513x513 sample stores the building geometry, the line-of-sight (LOS) state, attenuation, delay spread, angular spread, and variable transmitter height. As a focused first use-case, we propose an interpretable height-aware attenuation model. Its LOS branch combines free-space loss, two-ray term, and compact data-based height/range calibration. Its non-LOS (NLOS) branch combines a COST 231-Hata basis with local environment-specific linear calibration. The proposed model reaches 1.93 dB overall root mean square error, with 1.74 dB in LOS and 3.54 dB in NLOS on over 500 unique locations in 14 unseen cities (2,590 samples in total). The result provides attenuation data for FR3 UxNB deployments and a physical anchor for future FR3 modeling efforts.

0.36

Synergising Local Geo-Environmental Characteristics with Spatial Context for Enhancing Landslide Susceptibility Mapping

cs.CV ·2026-08-25 ·Yusen Cheng, Lei Fan, Qinfeng Zhu, Cheng Zhang, Yangyang Li +1 more
published similarity 0.50
Abstract

Data-driven methods are widely used in landslide susceptibility mapping (LSM) because they can effectively model the complex relationships between landslides and geo-environmental conditions. Existing data-driven approaches generally follow two types of data representations. Pixel-based models focus solely on the geo-environmental characteristics of a specific landslide but neglect the influence of its surrounding environment. Patch-based models incorporate surrounding spatial context but may include pixels with weak or no spatial relevance to the target landslide location. To address this limitation, this study proposes a Local-Geo and Spatial Context Fusion (LGSCF) strategy, which synergises the geo-environmental characteristics of landslide points with their corresponding spatial context through a feature-wise modulation mechanism. We tested the LGSCF strategy by integrating it into several representative convolutional neural network (CNN) architectures, creating nine different LGSCF-based models. The primary study area covers approximately 2644 km2 across Jenai and Sinyi Townships in Nantou County, Taiwan, and the dataset comprises 5332 landslide samples and an equal number of non-landslide samples. The results show that LGSCF-based models consistently outperform their corresponding baselines, achieving F1-scores up to 87.09% and AUC values up to 0.9472. Furthermore, the susceptibility maps produced by LGSCF-based models show that known landslides are more accurately concentrated in "very high" susceptibility zones with fewer misclassifications. These findings demonstrate that our fusion strategy can significantly improve the accuracy of landslide susceptibility mapping.

0.21

ProTrav: Probabilistic Traversability with Elevation Uncertainty Propagation for Risk-aware Off-road Navigation

cs.RO ·2026-10-22 ·Chuanlin Zuo, Miloš Prágr, Arun Kumar Singh, Mohammad Loni, Reza Ghabcheloo
similarity 0.49
Abstract · 9 pages, 7 figures

Reliable traversability estimation is essential for autonomous navigation on unstructured terrain. State-of-the-art approaches typically evaluate traversability from deterministic terrain elevation, thereby overlooking spatial correlations in the terrain and failing to account for how elevation uncertainty propagates through nonlinear traversability mappings. We propose ProTrav, a probabilistic terrain representation that uses function-space sampling to generate spatially correlated terrain realizations and propagate elevation uncertainty to traversability cost. First, a Sparse Variational Gaussian Process (SVGP) reconstructs a probabilistic elevation field from observations. Then, posterior function-space sampling generates spatially correlated terrain realizations, preserving spatial dependencies between neighboring locations while propagating elevation uncertainty through geometric features into traversability cost. Consequently, a distribution of traversability cost at arbitrary location is established, where the mean and standard deviation quantify the expected traversability cost and associated uncertainty, respectively. A risk term is defined by moment-based Upper Confidence Bound (UCB) and incorporated into a Model Predictive Path Integral (MPPI) controller for risk-aware navigation. Simulation experiments demonstrate navigation success rates exceeding 90\% on different terrains, compared with below 40\% for a baseline, while reducing attitude variations. Furthermore, the proposed approach is validated on a robot traversing real-world off-road terrain.

0.13

OrTeN: Neural Inverse Graphics for Joint Terrain and Line-scan Camera Trajectory Reconstruction

cs.CV cs.GRcs.LG ·2026-10-16 ·Josef Biberstein, Sertac Karaman
similarity 0.49
Abstract

Digital terrain maps (DTMs) are used for landing site selection, terrain-relative navigation, and geological analysis in planetary exploration. Existing state-of-practice reconstruction techniques for creating DTMs from satellite imagery use multi-view stereo, requiring complex pipelines for dealing with camera error, changing illumination, and images with limited disparity. This work introduces Orbital Terrain Networks (OrTeN), a DTM construction method that uses neural inverse rendering to jointly optimize a textured height map and orbital camera corrections from line-scan satellite images. OrTeN operates directly on calibrated line-scan images with pixel values expressed as radiance factor (I/F) and corrects both broad trajectory pose inconsistencies and high-frequency pointing jitter jointly with surface reconstruction during training. Surface-projected patch normalized cross-correlation (NCC) enforces consistency between observations of the same terrain, refining an initial rough reconstruction. A semi-empirical reflectance model and shadow rendering are used to fit surface appearance from multi-date imagery with differing solar illumination. OrTeN requires only calibrated line-scan images and initial camera poses and does not use any structural priors including ranging/depth measurements or initial rough DTMs. OrTeN is evaluated on four planetary imagery datasets. Aligned terrain RMSEs are 2.35 m at Jezero Crater, 2.82 m at Gale Crater, 16.18 m at Olympus Mons, and 0.43 m at McGetchin Crater.

0.21