CS Paper Radar

Duplication-Aware Retiming and Cell Interface Redesign for Superconductor Circuit Minimization

Panagiotis Papanikolaou, Alex Vanasse, Haoran Jin, Georgios Tzimpragos, Jennifer Volk

cs.ET cs.AR ·submitted 2026-10-01 18:07 UTC · v1
published

Abstract

Superconductor electronics have increasingly shifted away from RSFQ and its variants toward logic families that eliminate explicit gate-level clocking. While this transition enables simpler circuits and more efficient architectures, it also introduces an implicit reliance on dual-rail codes, resulting in inherent gate duplication. This work presents a duplication-aware retiming methodology for Josephson junction (JJ) count minimization, co-optimizing register placement and polarity assignment. The approach applies beyond SFQ to any monotonic circuit. We further identify cell interfaces---specifically, interconnect drivers, receivers, and fanout (FO) elements---as dominant contributors to JJ count in each cell. A new amplifier design is introduced to reduce these costs, integrated within existing SFQ cells, experimentally verified, and characterized to form a new SFQ cell library. Our results demonstrate a 63-71% JJ count reduction in single-cycle implementations and 41-66% reduction in multi-cycle implementations compared to the prior state-of-the-art. The latter establishes a new Pareto frontier, achieving both shorter critical paths and lower JJ counts than the best-to-date single-cycle implementations.

DOI
10.1145/3770743.3803985

Closest papers

Nearest neighbours by meaning across the whole index.

qLevelPlace: A Level-Based Placement Framework for RSFQ Circuits

cs.ET ·2026-11-02 ·Ziyu Liu, Jingkai Hong, Robert S. Aviles, Sasan Razmkhah, Peter A. Beerel +1 more
top venuebenchmark similarity 0.60
Abstract · 7 pages, 4 figures. Accepted to ASP-DAC 2027

Rapid Single Flux Quantum (RSFQ) logic can operate at ultra-high clock frequencies; however, its physical design is complicated by explicit splitter trees and deep gate-level pipelines in which every logic gate is clocked. To address this challenge, we present qLevelPlace, a level-based placement framework for RSFQ circuits. We separate gate and splitter placement into two stages to better support levelguided gate-to-row assignment and use a timing-aware quadratic cost function to penalize long interconnects. Experiments on the benchmark circuits show that, on average, qLevelPlace achieves a $2.65\times$ higher clock frequency and a 51% reduction in layout area compared with the state-of-the-art RSFQ placer qPlace.

0.32

RIVERPlace: Repairing Interconnect Violations with Efficient Retiming and Incremental Placement for AQFP Circuits

cs.ET ·2026-08-13 ·Robert S. Aviles, Ziyu Liu, Sasan Razmkhah, Massoud Pedram, Peter A. Beerel
benchmarkcode/data similarity 0.57
Abstract

The Adiabatic Quantum-Flux-Parametron (AQFP) offers near-Landauer-limit energy efficiency but faces significant scalability challenges due to strict path balancing and limited drive strength. To address this, we propose RIVERPlace, a framework that integrates long-wire pipelining, retiming, and incremental placement to resolve interconnect violations with minimal disruption. RIVERPlace first applies placement-aware retiming to repair violations without increasing logical depth. When depth increases are necessary, we introduce Buffer Cut Insertion (BCI), which formulates violation resolution as a constrained global edge-selection problem reducible to a maximum topological cut, thereby enabling an exact polynomial-time solution. By selectively pipelining edges across multiple rows, BCI avoids excessive buffer insertion while resolving interconnect violations. Experimental results demonstrate that RIVERPlace consistently outperforms prior AQFP placement approaches, reducing placement overhead by more than an order of magnitude in inserted buffers, 3x in placement-induced depth, and over 2x in circuit area, while also reducing runtime by more than an order of magnitude and latency by 38%. These improvements enable the first post-routing, timing-closed implementations of the complete open-source AQFP benchmark suite, including larger circuits like alu32.

0.20

JFS-CryoMem: A Cryogenic Memory with Voltage-Controlled Superconducting Devices and Femtojoule-Scale Write/Read Energies

cs.ET cond-mat.supr-con ·2026-09-27 ·Md Rahatul Islam Udoy, Md Mazharul Islam, Juan P. Mendez, Denis Mamaluy, Aaron J. Muhowski +5 more
similarity 0.55
Abstract

Scalable cryogenic systems require memory that combines nonvolatile storage, selective access, low thermal disturbance, and compatibility with superconducting electronics. We present a cryogenic memory architecture that integrates a voltage-controlled Josephson junction field-effect transistor (JJFET) selector with a ferroelectric superconducting quantum interference device (FeSQUID) storage element, hereafter termed JFS-CryoMem. The JJFET provides gate-controlled cell selection, whereas the FeSQUID stores information in stable remanent-polarization states. JFS-CryoMem features separate read and write path mechanisms that support nondestructive readout and independent optimization of programming and sensing conditions. The architecture is evaluated using experimentally calibrated compact models that reproduce the measured electrical characteristics of both constituent devices. We demonstrate selective programming using a half-bias scheme, nonvolatile state retention, and distinguishable readout in a $4 \times 4$ array while accounting for the selected cell and all unselected parallel branches. We then extend the analysis to arrays up to $16 \times 16$ and examine how array scaling alters current distribution, column-equivalent resistance, readout separation, required bitline current, and read energy. The results reveal the principal sensing and energy tradeoffs associated with larger arrays and identify the operating conditions required to preserve read distinguishability as the array grows. JFS-CryoMem provides a device-to-array framework for cryogenic memory in quantum, high-performance, and space-oriented computing systems.

0.16

Highly Scalable Selectorless Cryogenic Memory Array Using Ferroelectric Josephson Field-Effect Transistors

cs.ET ·2026-09-25 ·Saheeb Ahmad, Shamiul Alam
similarity 0.53
Abstract · 8 pages, 4 Figures, 1 Table

Scalable memory systems that satisfy the temperature, speed, and energy requirements of cryogenic environments are essential for the development of large-scale quantum computers. They may also benefit high-performance computing and space applications. However, existing cryogenic memory technologies often suffer from limited scalability, low operating speed, and/or high power consumption, restricting the scalability of target applications. Ferroelectric Josephson field-effect transistors (Fe-JoFETs), which combine ferroelectric polarization with the superconducting properties of Josephson junctions, offer a promising solution. The ferroelectric layer enables nonvolatile storage capability, while the Josephson junction supports high-speed, energy-efficient operations. In this work, we leverage Fe-JoFETs to develop a highly scalable, ultra-low-power, nonvolatile cryogenic memory array that does not need additional selector devices for random access. Moreover, the superconducting component of Fe-JoFET provides a binary decision during read, eliminating the need for sensing peripheral circuitry. We first develop a physics-based Verilog-A compact model for Fe-JoFETs and use it to verify the functionality of the proposed memory array. By eliminating both selector and sensing circuitry, the proposed memory architecture offers higher scalability than existing technologies. The ultra-low-power operation of this memory also makes it compatible with strict power budgets of cryogenic applications.

0.35

Reversing the Clock: Layout-Aware Recovery of Design Intent from Clock Distribution Networks

cs.CR ·2026-10-02 ·Sascha Tommasone, Zehra Karadağ, Christopher Pawlowicz, Michael Green, Bruno Machado Trindade +4 more
publishedcode/data similarity 0.52
Abstract · Accepted at the IEEE International Conference on Physical Assurance and Inspection of Electronics (PAINE) 2026

Hardware reverse engineering supports competitive analysis and hardware assurance by recovering information about an integrated circuit (IC) from its physical implementation. While existing techniques primarily recover the gate-level netlist, which represents logical functionality, they often overlook physical design decisions such as placement, routing, delay insertion, and interconnect optimization. The clock distribution network encapsulates many of these decisions; however, no prior published work has recovered this network from a fabricated IC to infer design intent. We present a layout-aware methodology that recovers and analyzes the clock distribution network by integrating a recovered gate-level netlist with layout information extracted from scanning electron microscope imagery. Our four-phase pipeline recovers clock-tree topology, buffering, gating and switching, interconnect delay, and crosstalk-mitigation measures. We demonstrate our methodology on a commercial 450 nm IC, recovering a global H-tree backbone with local X-tree-like branching, identifying an independent clock tree and global clock gating, quantifying latency, skew, and routing lengths, and confirming the absence of dedicated crosstalk mitigation. Together, these findings let us reason about the designer's intent. To encourage further research and support reproducibility, we release our clock tree recovery algorithm as open source.

0.45

A 12-CNOT Double Qubit Excitation Gate

cs.AI quant-ph ·2026-08-12 ·Irfansha Shaik
similarity 0.51
Abstract · 5 pages, 6 figures, 1 table, (update figures from version 2, improved results)

Effective implementation of high-level quantum gates is essential for practical quantum computing. In this work, we presented, to the best of our knowledge, the first reported 12-CNOT decomposition of the double qubit excitation operator. We compared our new circuit with the previous SOTA 13-CNOT circuits in 4 different metrics. Our new circuit has the lowest CNOT count (12), lowest CNOT depth (8, roughly 27% reduction), and lowest total circuit depth (15, 25% reduction) among all the previous SOTA circuits. With output qubit relabeling, the CNOT depth can be further reduced to 7 (roughly 36% reduction from 11). Further, we only added 2 extra 1q gates (from 11 to 13) compared to the best of the SOTA circuits. As the double qubit excitation operator can be used as a building block hundreds or thousands of times in practical quantum algorithms, any reduction in such primitives compounds over the full circuit, resulting in significant overall resource savings.

0.07

Timing-Driven Logic Remapping with Local Physical Context

cs.AR ·2026-10-01 ·Zijian Jiang, Hongyang Pan, Cunqing Lan, Keren Zhu
similarity 0.51
Abstract

The timing behavior of a mapped circuit depends on both its logic implementation and the physical environment in which that implementation is realized. Revisiting mapping decisions after placement therefore requires a search procedure that accounts for surrounding timing constraints, fanout loads, and interconnect effects. We study local remapping in this setting and develop a framework that couples discrete mapping search with physical implementation feedback. Timing-critical regions are isolated through bounded windows whose interfaces retain the context of the surrounding circuit. Within each window, a mixed-integer formulation jointly selects logic cuts, signal polarities, and library cells under a delay model informed by estimated locations and interconnect parasitics. A continuous relaxation filters the search space before discrete optimization produces alternative implementations with similar modeled timing and different structural choices. These implementations are reconstructed and assessed through legalization, routing-based parasitic estimation, and timing analysis. Physically validated improvements are incorporated into the design, and the updated context guides subsequent searches. The framework provides a systematic way to revisit local logic implementations while accounting for their interaction with an existing placement.

0.54

Differentiable Partitioning With Dual-Max 3D Wirelength Model and Hybrid Bonding Terminal Awareness for Optimized 3D Placement

cs.ET ·2026-09-06 ·Liwen Jiang, Xu Shi, Rufeng Xiao, Changhao Yan, Rujun Jiang +2 more
similarity 0.50
Abstract

Research on 3D integrated circuits (3D-ICs) physical design has expanded rapidly in recent years, driven by the increasing adoption of hybrid bonding and the demand for higher integration density. Continued scaling of hybrid-bonding pitch supports higher vertical interconnect density and finer-grained circuit partitioning in 3D-ICs. Hybrid bonding-enabled 3D-ICs offer substantial benefits in interconnect scaling and system integration, yet tier assignment remains challenging because it jointly determines 3D wirelength and hybrid bonding terminal (HBT) assignment. This paper presents a differentiable partitioning framework that directly optimizes placement-aware tier assignment for 3D-ICs through gradient-based optimization. Discrete tier assignment is relaxed to continuous probabilities, and a Dual-Max 3D wirelength model is introduced as a placement-aware surrogate for tier-specific half-perimeter wirelength (HPWL). In addition, a terminal-aware cutsize penalty gives higher weights to cross-die nets with predicted HBT overlaps, and a local balance penalty discourages regional area overflow on each tier. On ten OpenROAD benchmarks, our method reduces final die-to-die (D2D) HPWL by 8.05% and 14.81% on average relative to hMETIS and TritonPart, respectively. On the seven benchmarks with available CoPlace results, the average HPWL reduction is 10.33%. The source code for the differentiable partitioner and the integrated 3D placement flow is publicly available to support reproducibility.

0.43