CS Paper Radar

SAC-Controlled RIS-Assisted Monopulse Radar for Multipath-Robust Vital-Sign Localization

Jafar Norolahi, Alireza Vahid

eess.SP ·submitted 2026-10-02 17:29 UTC · v1
published

Abstract

Contactless radar sensing offers a promising approach to continuous vital-sign monitoring. However, indoor multipath can distort direction estimates and generate ghost responses. This paper presents a reconfigurable intelligent surface (RIS)-assisted monopulse radar whose RIS phase configuration is controlled by a soft actor-critic agent to improve angular localization. The proposed framework combines simultaneous sum and difference beams with a programmable reflected path, enabling a single radar node to adapt the propagation environment without relying on multiple synchronized sensors. A compact multipath model formulates RIS control as a continuous-action reinforcement-learning problem whose reward penalizes bearing errors and misleading multipath reinforcement. Numerical results compare the proposed method with conventional monopulse processing without an RIS, a frequency-modulated continuous-wave range-angle fast Fourier transform baseline, random RIS phase configurations, and deterministic RIS controllers. The evaluation considers different target separations, signal-to-noise ratio levels, and multipath conditions.

Comment
To appear in IEEE CCNC 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Learning-Based Beam Adaptation for Active/Passive-Aware Monopulse ISAC with Leakage Suppression

eess.SP ·2026-10-02 ·Jafar Norolahi, Alireza Vahid
published similarity 0.58
Abstract · To appear in IEEE CCNC 2027

This paper proposes a learning-based beam adaptation framework for active/passive-aware monopulse integrated sensing and communication (ISAC) with spatial leakage suppression. A single gNB uses a shared array and orthogonal frequency division multiplexing dual-functional radar-communication signaling to jointly support downlink transmission and monopulse sensing. Radar detections and uplink spatial evidence are fused to distinguish cooperative active directions from passive directions, while a protected angular zone limits unintended illumination. Soft Actor-Critic deep reinforcement learning adapts the transmit beam using communication, sensing, leakage, and previous-action feedback. Numerical results show accurate active/passive spatial classification and robust leakage control as the number of passive targets increases from one to twelve. The proposed SAC controller maintains aggregate passive leakage below the prescribed budget across the full sweep and, from two passive targets onward, achieves the highest leakage-compliant sum rate among the considered baselines.

0.39

Distributed Target Tracking using Radar Networks

eess.SP eess.SY ·2026-08-19 ·Shao-Hsuan Hung, Raj Thilak Rajan
benchmarktheory similarity 0.52
Abstract

Distributed target tracking is essential for scalable and robust sensing systems, as it enables multiple radar nodes to cooperatively estimate a target state without relying on a centralized fusion center. In this paper, we present a fully distributed framework for single-target tracking in frequency-modulated continuous-wave (FMCW) radar networks. Each monostatic radar node observes local range and Doppler measurements and exchanges information only with neighboring nodes. Two consensus optimization-based estimators are developed. First, a Distributed Maximum A Posteriori (D-MAP) estimator is formulated for batch-based tracking, where prior state information is incorporated and the resulting optimization problem is solved using consensus-based alternating direction method of multipliers (ADMM). Second, a Distributed Extended Kalman Filter (D-EKF) is proposed for recursive tracking, where each node performs local prediction and correction followed by consensus ADMM-based information exchange. We derive the posterior Cramér-Rao lower bound (PCRLB) as a theoretical performance benchmark. Our simulation results show that D-MAP improves the accuracy of the estimation over the distributed maximum-likelihood baseline. These results demonstrate that the proposed framework provides a scalable and robust alternative to centralized radar tracking, given only local inter-node communication.

0.16

Target Localization and Self-Calibration in a Multistatic Radar System

eess.SP ·2026-08-16 ·Ahmad Musallam, Husheng Li
publishedtheory similarity 0.52
Abstract

Target localization in a multistatic radar system, where multiple receivers cooperate to improve target positioning accuracy, has many applications, including cooperative simultaneous localization and mapping (SLAM) and autonomous robot networks. A key challenge in these applications is the uncertainty in the position and orientation (pose) of the radar receivers due to platform mobility. This work investigates the achievable improvements in both target localization and receiver pose estimation by deriving the Cramer-Rao lower bound (CRLB) for a multistatic radar system performing bistatic range and bearing measurements. We propose an alternating weighted least-squares algorithm that jointly optimizes target and receiver parameters. Monte Carlo simulations demonstrate that the algorithm performance approaches the CRLB for low to moderate noise levels.

0.52

RIS-Assisted Radar-Communication Coexistence: Detection Analysis with Channel Uncertainties

eess.SP ·2026-08-24 ·Rawan Derbas, Shimaa Naser, Hamad Yahya, Sanjeev Gurugopinath, Paschalis C. Sofotasios +1 more
similarity 0.51
Abstract · Submitted for publication in IEEE journals

Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology for improving communication reliability in radar-communication coexistence (RCC) scenarios, particularly for communication users (CUs) located inside radar exclusion zones, where only the radar is permitted to operate and the two systems remain uncoordinated. In such settings, CUs may suffer from strong radar interference whose phase is random and difficult to track while also facing difficulty in obtaining accurate CSI from the base station. These challenges become even more critical in the presence of RIS phase errors, which limit the applicability of conventional coherent detection methods. Motivated by these practical limitations, this paper develops an RIS-assisted RCC framework for a CU operating in an uncoordinated RCC setting. Within this framework, we derive two practical maximum-likelihood (ML)-based detectors, both of which avoid tracking the radar interference phase: 1) a non-coherent detector that does not require instantaneous CSI and incorporates RIS phase uncertainty, and 2) a mismatched coherent detector that relies on imperfect CSI. For the non-coherent case, we derive an exact likelihood expression and a closed-form detector in the low to moderate SINR regime. For the imperfect CSI case, we derive the corresponding closed-form detector in the low-to-moderate SINR regime, and analyze performance through pairwise error probability (PEP), yielding a tractable approximation based on Gauss-Chebyshev quadrature. Numerical and analytical results show that the proposed non-coherent detector closely matches the optimal ML detector, validating its practical usefulness.

0.25

Doppler-aided Position-Velocity Tracking of Hidden Objects using mmWave Radar

cs.RO cs.CV ·2026-10-25 ·Yerin Cheon, Kush Garg, Akshat Dave
benchmark similarity 0.50
Abstract · 8 pages, 8 figures

Safe indoor operation requires autonomous tracking of objects that are not directly visible to the robot. Optical non-line-of-sight (NLoS) methods depend on ambient lighting and scene geometry or on weak multi-bounce returns that need long acquisitions. Millimeter-wave (mmWave) radar offers an attractive alternative: walls act as reflectors for mmWave signals, and frequency-modulated continuous-wave (FMCW) radars enable fast, practical measurement of range, angle, and velocity. However, the low resolution of these radars leads to spatially ambiguous observations. The Doppler information, although particularly sensitive to target motion, remains underexplored in indoor NLoS localization: existing methods emphasize spatial representations and either collapse or discard the Doppler dimension before learning. To leverage the complete Range-Azimuth-Doppler (RAD) information, we acquire the first indoor NLoS radar dataset that pairs sequential RAD measurements with synchronized position and velocity ground truth under controlled variations in motion: 576 sequences totaling 720,856 frames across 12 trajectories of a mobile robot moving along varying speeds, starting positions, and material configurations. We then formulate NLoS tracking as sequential position-velocity estimation rather than frame-wise localization: a shared 3-D encoder processes the full RAD representation of consecutive frames, separate recurrent branches estimate position and velocity, and post-inference refinement combines the two into a motion-consistent trajectory. Our method achieves 8.95cm position and 1.75cm/s velocity errors on held-out trajectories and generalizes to unseen scenarios involving a moving human target. Together, our dataset and tracker establish a benchmark for tracking hidden moving targets with a low-cost radar.

0.19

Small Language Model enabled Autonomous agent for Language-Conditioned Cognitive Radar

eess.SP cs.AIeess.SY ·2026-08-12 ·Minhaj Uddin Ahmad, Zakia Zaman, Shunqiao Sun, Mizanur Rahman
published similarity 0.50
Abstract · Accepted at MLSP 2026, ATL, USA

Modern radar systems require adapting their processing strategies in response to changing interference, clutter, and data availability. This paper introduces a framework for a small language model (SLM)-driven autonomous agent designed for language-conditioned cognitive radar, functioning as an intelligent controller for a suite of array signal processing tools. Given a natural-language command, the agent extracts radar-operation-related cues, selects an appropriate sequence of signal-processing methods, configures parameters, and invokes executable tools for numerical computation. Experiments with a synthetic uniform linear array (ULA) radar demonstrate that, given a natural-language command, the agent performs meaningful algorithm selection across diverse scenarios for sidelobe control, jammer suppression, multiple-null beamforming, coherent-source handling, and low-snapshot direction-of-arrival (DOA) estimation. Ablation results show that radar-specific prompting and physics-grounded tool execution are both required for reliable decisions and hallucination-free numerical results.

0.19

Doppler-Only Extended Target Tracking in a Distributed Antenna System

eess.SP ·2026-10-01 ·Baptiste Sambon, Gilles Monnoyer, Luc Vandendorpe, Claude Oestges
similarity 0.49
Abstract · Submitted to IEEE 105th Vehicular Technology Conference: VTC Spring 2027

In modern radar and Integrated Sensing and Communication (ISAC) systems, the conventional point-scatterer assumption becomes increasingly inaccurate due to higher spatial resolution. In this context, Extended Target Tracking (ETT) has grown interest in recent years. However, most existing ETT works are designed for monostatic systems due to the fine time synchronisation or per-node antenna arrays required for ranging and angle estimation in multistatic scenarios. In contrast, this paper proposes a novel approach to extended target tracking in a distributed antenna system, where only bistatic Doppler frequency measurements are available. Doppler-only tracking is particularly attractive as it avoids the two aforementioned issues. To address this Doppler-only extended target tracking problem, we develop a modified Rao-Blackwellised Particle Filter (RBPF) that replaces the standard Kalman update with a particle-specific Extended Kalman Filter update followed by a relinearisation step, handling the non-linearities of both the rigid extended target dynamics and the observation model. Numerical simulations show the effectiveness of the proposed algorithm for accurate extended target tracking under this Doppler-only setting.

0.50

Track-conditioned Residual Frequency Estimation For Low-resolution FMCW Radar

eess.SP ·2026-09-24 ·Huy Trinh, George Shaker
similarity 0.49
Abstract

Low-resolution FMCW radar normally forms a complete range-Doppler representation before detection and tracking. After association, however, the tracker already predicts the target's next range and radial velocity. We propose track-conditioned residual estimation (TCRE), which removes the predicted moving-target phase before spectral formation, summarizes each 64-sample chirp by four coherent complex sums, and estimates the remaining beat-frequency and Doppler-frequency errors from phase progression. We account for the first-order fast-time and slow-time coupling of a moving target and derive the local phase-unwrapping region and three-receiver local information bound. Four summaries retain 93.77 percent of the zero-residual fast-time information while reducing the retained representation by a factor of 16. In 5,000 matched 60-GHz cluttered simulations, TCRE reduces range RMSE by 32.8 to 46.3 percent and velocity RMSE by 58.6 to 71.0 percent relative to a fully specified same-prior residual ZFFT.

0.52