CS Paper Radar

Energy Variation in Training Modern Computer Vision Architectures

David Cortes, Carlos Juiz, Belen Bermejo

cs.CV cs.PF ·submitted 2026-09-29 09:15 UTC · v1

Abstract

The rapid growth of deep learning has substantially increased the energy consumption associated with model training, making energy efficiency an increasingly relevant design criterion. This study empirically measures the energy variation of training seven modern computer vision architectures, MobileNetV3-Small, MobileNetV3-Large, EfficientNet-B0, EfficientNet-B1, ViT-B/32, ConvNeXt-Tiny, and ViT-B/16 for the ImageNet-1k classification task, using a homogeneous 10,000-image subset (ImageNet-10k) and a uniform 40-epoch baseline configuration executed on two NVIDIA Tesla P100 GPUs at the Bioinformatics and Computational Biology Center of Colombia (BIOS). Energy was recorded directly via NVML and contrasted with the computational complexity of each model. The results show a Pearson correlation of 0.85 between floating-point operations (GFLOPs) and energy consumption in kWh, indicating that computational complexity is a strong but imperfect predictor of energy expenditure: architectures with comparable GFLOPs exhibited consumption differing by up to 3.1x due to differences in the hardware efficiency of their dominant operations. The EfficientNet variants offered the best balance between classification performance (Val Top-5 up to 97.15%) and energy efficiency (0.457-0.611 kWh), while Vision Transformers exhibited the highest relative energy consumption and lower classification performance under the evaluated configuration. These findings guide architecture selection in energy-constrained computing environments.

Comment
International Conference on Next-Generation AI Technologies (ICNGAIT) Shanghai, China, 5 pages, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Green AI: Evaluating Energy Efficiency for Quantized LLM Inference

cs.LG cs.AIcs.CY ·2026-10-13 ·Petar Basta
similarity 0.66
Abstract

While it is known that quantization of large language models (LLMs) reduces memory usage via lower-bit weights, studies quantifying the resulting impact on energy usage and carbon intensity are scarce. We present the first unified evaluation of weight-only quantization strategies for LLM inference across varying input/output lengths and GPUs, highlighting differences in energy efficiency in addition to accuracy degradation and runtime. We study quantized inference on Llama 2 7B, Phi 3.5 Mini Instruct, OLMo 1B, Qwen 2.5 7B, and Qwen 2.5 14B across GLUE MNLI, MMLU, HumanEval, and GSM8K datasets, evaluating 10 post-training quantization (PTQ) strategies on NVIDIA H100, A6000, A100, and L4 GPUs. We identify a novel trend showing that quantization techniques tend to exhibit peak energy efficiency relative to full-precision baselines when inputs are sufficiently long and outputs are short. Furthermore, we show that quantization strategies become marginally more energy-efficient relative to full-precision models as batch sizes increase, though gains are modest. Notably, fused-kernel implementations such as EETQ int8 and Bitsandbytes int8 offer the highest energy savings, up to 4x compared to FP32 on short text generation, with negligible accuracy loss. Finally, we observe that energy usage closely tracks runtime on our evaluated benchmarks, indicating that, in practice, latency optimization can serve as a reliable proxy for reducing the environmental footprint of LLM services. We conclude with suggested directions for strategically selecting low-carbon quantization strategies based on specific inference requirements.

0.10

Accelerating Data Preprocessing for Efficient Vision Model Inference on Jetson Edge Device

cs.PF ·2026-08-27 ·Tian Chen, Nawras Alnaasan, Jinghan Yao, Aamir Shafi, Hari Subramoni +2 more
similarity 0.64
Abstract

Data preprocessing is a crucial part of deep learning workflows on edge devices. However, decoding data saved in JPEG format is very compute-intensive and occupies a major portion of the preprocessing pipeline. Therefore, increasing the decoding speed is vital for improving overall throughput, especially for inputs with large image sizes, which are often subject to preprocessing bottlenecks. On the other hand, edge devices are equipped with specialized hardware units to accelerate media processing and image decoding. For instance, the NVIDIA Jetson platform possesses a dedicated NVJPEG unit. These units can be used to enhance the performance of the preprocessing pipeline. This paper introduces the utilization of such specific hardware acceleration units for offloading decoding tasks. By combining this with a multi-instance approach, it allows for the parallelization of all compute resources including CPU, NVJPEG, GPU, and DLA in Jetson devices. In this work, we compare various potential pipeline designs. On ResNet18, ResNet50, and ResNet152, three models with different sizes, we evaluate the impact of batch sizes and image sizes, as well as the characteristics of GPU/DLA inference. Finally, a fine-tuning experiment for multi-instance design has been conducted. The multi-instance design with a specific hardware decoding unit involved offers up to 30.02% speedup for large image sizes, compared with the most optimized design without it. Based on these findings, we demonstrate the benefits of using the NVJPEG unit in deep learning workflows and provide guidelines for tuning and optimizing edge inference workflows.

0.10

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.64
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

CARB: A Characterization-Guided Framework for CNN Inference Cost Prediction and Deployment Screening

cs.AR cs.LGcs.PF ·2026-08-11 ·Linh Nguyen, Zhixin Pan
similarity 0.63
Abstract

Accurate pre-deployment estimation of CNN inference cost--energy, latency, and peak memory--is increasingly critical as models are deployed on resource-constrained GPU platforms. Existing approaches rely on FLOPs, latency measurements, or single-device profiling as energy proxies, overlooking the non-linear interactions between architectural design and hardware load. We present a workload characterization study of 13 419 CNN configurations on two GPU platforms (RTX 5090 and RTX 3080) under GPU telemetry, revealing that energy, latency, and memory exhibit fundamentally distinct scaling behaviors: energy and latency diverge by 3x under high computational demand, and cross-GPU transferability differs by target--energy and latency require platform-specific models while memory transfers well across the two tested platforms. Building on these characterization findings, we develop CARB, a cascade-blended ensemble that jointly predicts all three targets with R2 ~0.99, and a two-stage deployment screening workflow that eliminates over 90% of candidates in seconds, reducing large design spaces to a Pareto-prioritized shortlist validated against real hardware.

0.04

Seeing at the Edge: Energy Characterization of Vision-Language Model Inference on Edge Platforms

cs.LG ·2026-10-14 ·Junlin Liao, Harshit Kondle, Di Liu, Zonghua Gu
similarity 0.63
Abstract

Vision-language models (VLMs) are moving onto edge devices, but little is known about how much energy they draw on single-board computers with NPU or GPU accelerators, or where that energy goes. We measure total-system energy, latency, and thermal behavior of Qwen2-VL-2B-Instruct and its text-only sibling on a Raspberry Pi 5 with a Hailo-10H NPU and on a Jetson Orin Nano Super, on both CPU and accelerator, and separate the fixed energy of each request from the energy that grows with output length. Because the accelerators use different quantization and serving software, we compare deployment stacks rather than silicon. Three findings stand out. First, NPU offloading makes the Pi a much more efficient VLM platform: it cuts energy per generated token by about two-thirds, leaves the host CPU largely free, and avoids the thermal throttling that the CPU backend reaches in sustained use. Second, an image adds both fixed and per-token energy, but at typical response lengths generating the answer costs far more than processing the image. Third, the Jetson GPU favors short responses through its lower fixed cost per request, whereas the Pi NPU favors longer ones through its lower cost per output token; their energy curves cross near 40 output tokens.

0.16

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.63
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

A predictive, per-engine energy roofline of the Apple Neural Engine

cs.CE cs.ARcs.LGcs.PF ·2026-11-14 ·Spencer H. Bryngelson
published similarity 0.62
Abstract · 40 pages, 5 figures, 36 tables (including a 28-table supplement as appendices). Accepted to ACM Transactions on Architecture and Code Optimi…

The Apple Neural Engine (ANE) is in over a billion devices, but is characterized indirectly via CoreML. Using a CoreML-free fused-graph dispatch path, we measure the ANE, along with the Apple GPU and CPU on the same device, with per-engine energy accounting. The consumer-available roofline does not predict the ANE in practice. A critical correction is that the ANE sees two effective memory bandwidths: a slow activation path and a fast weight-stream path. Two roofline ridges follow, and the weight-stream ridge is below that of the GPU. The ANE single-operand compute peak decreases instead of plateauing. Its weight stream is byte-bound in fp16 but limited by the dequantizer's element rate in int8. As a result, int8 compression saves energy at unchanged throughput and an int4 lookup-table stream raises throughput and efficiency at a cost of 2.55 points of ImageNet top-1. The corrected roofline identifies the lower-energy ANE paths and bounds it from below. A constructed device map reproduces across four unique ANE generations. Results show that operators should be placed by arithmetic intensity and fused for optimal performance.

0.65

Characterization of Request and Token Energy Costs for LLM Inference Workloads on GPU Platforms

cs.PF cs.DCcs.LG ·2026-08-28 ·Prabhu Vellaisamy, Vanessa Lam, Shawn Blanton, John Paul Shen
publishedhighly cited similarity 0.61
Abstract · Accepted at the 2026 IEEE International Symposium on Workload Characterization (IISWC 2026). 13 pages, 6 figures, 9 tables

Large language model (LLM) inference serving is priced by tokens, but GPU energy is consumed over inference windows. This accounting mismatch makes token-normalized metrics incomplete, since average output-token energy can decrease even when total request energy increases. We characterize this behavior with a decomposed energy model: a fixed one-time prefill with a fixed generation setup cost, while each output-token generation step adds marginal step energy. We evaluate this LLM inference energy model on NVIDIA H100 and H200 GPUs across dense and mixture-of-experts (MoE) models, reporting both request energy and token energy as functions of model type (M), phase (P), batch size (B), context length (C), and output length (N). For Llama-3.2-1B on H200 at batch-16 and context-4K, increasing output length from 10 to 512 tokens reduces token energy from 7.46 to 0.72 J/token while total batched inference-window energy increases from 1.19 to 5.93 kJ. Batching also reduces token energy, but the gain is context-bounded: at 10 output tokens, the batch-16 to batch-1 gain falls from 6.31x at context-512 to 1.17x at context-4K. MoE models amplify this effect: sparse routing and fragmented expert execution increase fixed energy at low concurrency, while batching spreads that energy across more generated tokens and substantially narrows the dense-vs.-MoE token-energy gap. These results show that energy-aware serving should jointly optimize both request energy and token energy, rather than only reducing per-token energy cost.

0.44