CS Paper Radar

Lollypop: Camera-to-Motion-Capture Calibration Verification with a Reference Target

Tianyi Liu, Kevin Harris, Mihika Dave, Kun He

cs.CV ·submitted 2026-10-03 21:56 UTC · v1
published

Abstract

Camera-to-motion-capture (mocap) calibration is essential for using mocap as ground truth in robotics, AR/VR, and other computer vision tasks. However, the calibration can drift after deployment, while calibration residuals and visual inspection provide limited independent verification. We present Lollypop, a fiducial-mocap reference target for independent calibration verification. The target couples an ArUco fiducial with a mocap marker constellation so the visual center and tracked centroid represent the same physical point. Given a candidate calibration, verification projects the mocap point into the image and measures its disagreement with the detected fiducial center. Experiments show sub-pixel nominal error, sensitivity to controlled extrinsic perturbations, and increasing error during an illustrative mixed-handling sequence.

Comment
Accepted at IEEE SENSORS 2026. 4 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Automatic Reproducible Camera Intrinsic Calibration

cs.RO cs.CV ·2026-09-09 ·Xiangcheng Hu
top venue similarity 0.65
Abstract · 6 pages, 7 figures

Accurate camera intrinsic calibration is fundamental to robot perception, and the accuracy depends on the quality of the collected images. However, existing target-based calibration methods often require the practitioner to manually filter out high-quality images and to specify an appropriate radial distortion order. This paper presents a fully automatic intrinsic calibration pipeline that determines both from the collected data. We adopt an iterative rejection scheme that estimates parameters on a candidate image set and removes views whose mean residual exceeds a multiple of the median. Crucially, this process runs independently under each candidate distortion order, so that the retained image set is consistent with the residual scale of that order. Further, the distortion order is selected on held-out images, with the intrinsics and distortion fixed and only the board pose re-estimated, ensuring that an added coefficient is supported by independent observations. Finally, we integrate both steps into an interactive calibration tool that supports full-pipeline data inspection and parameter estimation. Experiments on our own camera data and five public real-world datasets show that image filtering reduces the held-out reprojection error by 25\%, the order selection further by 5\%, achieving the lowest held-out mean among four compared configurations without manual image selection. We will release the code and data to facilitate future research.

0.45

Can a Display Be Used for Rapid LiDAR-Camera Extrinsic Calibration?

cs.CV ·2026-10-20 ·Zuhao Zou, Xiangcheng Hu, Jianhao Jiao, Jin Wu
benchmarkcode/data similarity 0.64
Abstract

ScreenCalib enables light detection and ranging (LiDAR)--camera extrinsic calibration using an ordinary programmable display, providing known visual markers and controlled geometry while reducing dedicated target preparation. The camera observes displayed AprilTags, whereas the LiDAR measures the physical screen surface and boundary, requiring indirect cross-modal association. Display geometry introduces association ambiguities, while indoor clutter complicates extraction. ScreenCalib addresses these challenges through tag-guided display extraction, geometric hypothesis generation and refinement, and surrounding scene edges for ambiguity resolution. The single-pose mode requires only one static placement. The joint multi-pose mode combines independent static observations through cross-pose consensus and jointly refines the shared extrinsics and tag scale, reducing sensitivity to tag-size measurement errors without requiring continuous motion or inter-pose trajectory estimation. Experiments in simulation and on three different sensor platforms cover mechanical and nonrepetitive LiDARs in clean and cluttered environments. Benchmark results show that ScreenCalib outperforms competitive calibration-board-based methods in translation accuracy. Joint multi-pose refinement further reduces mean rotation and translation errors across the three platforms and improves rendered-map alignment. Evaluation across readily available displays, including cell phones, tablets, laptops, computer monitors, and televisions, further examines ScreenCalib's versatility as a practical alternative to dedicated calibration targets. The source code is available at https://github.com/ZuhaoZou2026/ScreenCalib.

0.23

Laser-Tracker-Assisted Camera-to-Robot Calibration for Mobile Robots

cs.RO cs.CV ·2026-09-22 ·Jan A. Rudolph, Öykü Kandemir, Markus Ulrich
published similarity 0.64
Abstract · To appear in the proceedings of Forum Bildverarbeitung 2026

We present a laser-tracker-assisted hand-eye calibration method for camera-equipped mobile robots. The method combines laser-tracker-based 3D metrology with camera-based 2D observations. Building on our previous laser-tracker-assisted camera-to-robot calibration method for ground-observing mobile robots, we present a generalized formulation for calibrating the camera pose in the coordinate system of tracker-localized mobile robots. The new approach relaxes assumptions of our previous method on robot and camera configuration by chaining multiple calibration targets resulting in a more general approach supporting various camera-equipped mobile robot systems.

0.29

PATH: Continuous Target Sensing among Autonomous Cooperative Drones

cs.RO ·2026-09-11 ·Heegyeong Kim, Alice James, Avishkar Seth, Endrowednes Kuantama, Jane Williamson +2 more
similarity 0.64
Abstract

Continuous target sensing by uncrewed aerial vehicles (UAVs) is constrained by limited flight endurance, motivating the transfer of tracking responsibility between cooperating UAVs. Such a handoff requires the receiver to identify the same physical target currently tracked by the sender despite differences in viewpoint, scale, and target appearance. Existing approaches based on global target localization or appearance-based cross-view association are limited by positioning uncertainty or ambiguous visual features. This paper presents Perspective Alignment \& Tracking Handoff (\textbf{PATH}), a platform-agnostic, geometry-assisted sensing and verification framework for target handoff between two moving UAVs. The sender reconstructs the tracked target as a metric 3D point using RGB-D sensing, while the receiver estimates its relative pose from a fiducial observation and projects the transmitted target point into its own image as a spatial prior for target acquisition. The receiver-generated candidate is then returned to the sender and verified through a cross-view Mutual Agreement Handshake before tracking responsibility is transferred. Real-world UAV experiments show mean relative-position and target-position errors of 0.047~m and 0.030~m, respectively. Under visually ambiguous conditions, PATH achieves 96.0\% frame-level receiver-side target acquisition accuracy, with 2.0\% false-positive and 2.0\% false-negative rates. A sensor-error sensitivity analysis shows that relative-pose uncertainty is the dominant contributor to receiver-view projection error. The implementation operates at video rate with compact inter-UAV communication below 16~kB/s at 60~Hz, demonstrating the feasibility of lightweight geometry-assisted target handoff on resource-constrained UAV platforms.

0.38

AnchorHEC: Targetless Hand-Eye Calibration of Wrist and Fixed Cameras

cs.RO ·2026-11-02 ·Guebin Hwang, Taeyeop Lee, Yeonseo Lee, Hyosup Shin, Sungho Jo
code/data similarity 0.63
Abstract · 8 pages, 5 figures, 5 tables. Project page: https://hwanggb.github.io/AnchorHEC/

Recent robot systems combine wrist and fixed cameras, requiring camera-to-robot transforms for both. Most hand-eye calibration methods rely on targets or robot-body observations. Scene-based methods using 3D reconstruction require neither but address only wrist cameras. We introduce AnchorHEC, a targetless hand-eye calibration framework for wrist and fixed cameras in a single procedure using RGB images, forward kinematics (FK), and known camera intrinsics. We initialize both camera types using FK and a shared 3D foundation model reconstruction. FK-constrained wrist-image bundle adjustment reduces the impact of reconstructed pose and scale errors. If this refinement fails or retains too few inliers, we relax the constraints on potentially inaccurate FK poses and lens parameters. We use the refined wrist transform and FK to triangulate metric points and estimate fixed-camera poses. Across three backbones, calibration errors in simulation decrease by 86.4% in translation and 71.6% in rotation, averaged over both camera types, relative to reconstruction-based baselines. We also validate AnchorHEC on a physical robot. Project page: https://hwanggb.github.io/AnchorHEC/

0.34

Human-in-the-Loop Geospatial Annotation for Rapid Dataset Construction in Field-Deployed UAV Systems

cs.RO ·2026-09-23 ·Morgan Masters, Adam Korycki, Nikolaas Bender, T. Luca Altaffer, Nick Kuipers +2 more
similarity 0.62
Abstract · 30 pages, 10 figures (plus 2 in appendix)

Real-world perception systems must adapt to changing environments, but manual image annotation cannot scale to field data volumes. We present BirdsEye, which shifts expert annotation from images to the field: an operator records target locations in world coordinates using RTK positioning and calibrated projective geometry propagates each observation to all frames where the target is visible. To quantify how well physical annotations align with image observations, we derive a first-order mapping from camera-pose uncertainty to pixel uncertainty and validate it against Monte Carlo simulation. This mapping is linear in the six per-axis pose variances, so it inverts into a sensor design tool: we give a sufficient condition converting an annotation tolerance into a convex set of admissible pose-noise budgets, a closed-form largest admissible scaling of a deployed sensor suite, and a unique per-axis pose specification under an equal-budget-share allocation. We also analyze the planar-surface approximation underlying the projection, which holds up to 10 degrees of terrain slope. By direct measurement, we show that system projection accuracy is sub-decimeter (sub-30 pixel) at AGL altitudes of 10-20m under conditions excluding sustained yawing. During an in-field case study across three agricultural sites, two field workers produced 12,524 annotated frames carrying 55,600 labels in roughly 12 hours (25.5x per-worker rate increase over manual labeling). Detectors trained on imagery collected by this workflow recovered 56-89% of in-view surveyed targets at a geographically distinct farm, at pre-registered operating points; human review of the leading configuration estimates detection precision at 83-87%, spanning three tie-break conventions for clusters carrying contradictory human verdicts.

0.23

Marker-Constrained Pose-Graph Correction for Cross-Platform Georeferencing in GNSS-Denied Environments

cs.RO cs.MA ·2026-08-17 ·Marco Giberna, Jose Luis Sanchez Lopez, Holger Voos
published similarity 0.62
Abstract · 14 pages, 5 figures, 5 tables, submitted to SPIE Security + Defence conference

Autonomous operation in GNSS-denied environments requires heterogeneous mapping pipelines to maintain a consistent spatial reference. This paper presents a framework using camouflage-matched fiducial markers fabricated from Cholesteric Spherical Reflectors (CSRs) as pre-surveyed visual anchors. The anchors georeference both a lightweight LiDAR-odometry trajectory and a dense RTAB-Map reconstruction, allowing their outputs to be expressed in a common LUREF frame (geodetic coordinate reference system used in Luxembourg) without requiring GNSS measurements during operation. The method combines coarse similarity alignment with marker-constrained pose-graph optimization. We evaluate it using two handheld acquisition sessions with ground-level and elevated motion profiles emulating UGV and UAV operation. A single iMarker was relocated among six surveyed positions, with the first position revisited to quantify drift correction. Marker-anchor correction reduced revisit inconsistency by 97.9% and 99.1% for the UAV- and UGV-emulating sessions, respectively, and improved held-out anchor prediction compared with one-time alignment. Separately georeferenced dense reconstructions achieved a median cross-session nearest-neighbour distance of 58 cm without explicit cross-session registration. Marker processing operated in real time, while trajectory correction required less than 0.25 s per session. These results demonstrate a proof of concept for georeferencing lightweight odometry and dense reconstructions using visually unobtrusive, pre-surveyed anchors during GNSS-denied operation.

0.45

VGM-VS: Rethinking Visual Geometry Model for High-Precision Visual Servoing

cs.RO cs.CV ·2026-09-23 ·Yimin Pan, Sen Wang, You Zhou, Jianfeng Gao, Pengbo Sun +2 more
code/data similarity 0.61
Abstract · 8 pages, 3 figures. Corresponding author: Sen Wang. Project page: https://yimin-pan.github.io/vgm-vs/

We present VGM-VS, a visual servoing method built on a pretrained feed-forward visual geometry model. Given the current view and a reference image captured at the target configuration, we estimate the relative camera pose with a visual geometry model and apply it iteratively as the pose increment of a closed-loop pose-based visual servoing (PBVS) scheme. The geometry-aware representation acquired from large-scale pretraining keeps this estimate reliable when the target is occluded, weakly textured, or covers only a small part of the image. However, the scale ambiguity inherent to these models leaves the predicted translation defined up to an unknown scale, while the pose increment must be metric for robot control. We close this gap with a scene-specific metric adaptation: the robot autonomously records image--pose pairs along a predefined motion starting from the target pose, and we fine-tune the camera head on these data, jointly learning the hand--eye transform and thus removing the need for a dedicated calibration process. We evaluate our method on three real-world assembly tasks with demanding tolerances: USB-C cable picking, cable insertion, and RAM insertion. Running in real time at 30Hz, VGM-VS converges to submillimeter terminal accuracy on the cable tasks, and reaches success rates of 90--100\% when the target is moved during servoing. It converges in all trials under initial displacements of up to 30cm from the reference pose and with 50\% of the target object occluded, outperforming the compared visual servoing baselines.

0.34