CS Paper Radar

TIRMamba: A Thermal-Prior-Modulated State-Space Network for Sub-Million-Parameter Infrared Image Super-Resolution

Chun-An Lin, Tsung-Jung Liu, Yen-Chieh Ouyang

eess.IV cs.CVcs.LG ·submitted 2026-10-04 12:45 UTC · v1
benchmarkcode/data

Abstract

Infrared image super-resolution is currently led by Mamba-based networks with 26 to 37 million parameters, which are difficult to deploy on the airborne and handheld platforms where thermal imaging is most needed. This paper presents TIRMamba, a network with 896K to 910K parameters for single-channel thermal imagery. A Thermal Prior Highway computes gradient, local-contrast and spectral cues once at the input and, through one adapter per residual group, modulates a weight-tied bidirectional state-space trunk and gates its dual-scale detail branch; a tri-path reconstruction adds the learned residual to a bicubic radiometric baseline. Because the standard benchmark provides only 265 infrared training images and evaluates fusion products on full images, we train with a replay strategy: grayscale DIV2K pre-training followed by fine-tuning on 64-pixel patches drawn with equal probability from the infrared and natural corpora. At scale factor 4, TIRMamba matches the strongest protocol-trained methods on both official test sets with 29 to 40 times fewer parameters and 2.8 to 9.4 times lower latency; at scale factor 2 it gives the highest SSIM on both. A variant with prior-conditioned selectivity, TIRMamba-Rad, corrects a 3 dB raw-thermal failure of an intermediate size-invariant design and gives the best results at scale factor 4 on raw-thermal, unmanned-aerial-vehicle and independent-sensor test sets. Code and trained models will be released at https://github.com/julian135707/TIRMamba upon acceptance.

Comment
13 pages, 4 figures, 5 tables. Submitted to IEEE Transactions on Geoscience and Remote Sensing. Code and trained models will be released at https://github.com/julian135707/TIRMamba upon acceptance

Closest papers

Nearest neighbours by meaning across the whole index.

RGB-to-IR image translation for infrared vehicle detection in unseen UAV domains

cs.CV ·2026-09-02 ·Thijs A. Eker, Ella P. Fokkinga, Jan Erik van Woerden, Elfi I. S. Hofmeijer, Sebastiaan P. Snel +2 more
similarity 0.66
Abstract · Submitted to SPIE Sensors + Imaging 2026

Synthetic training data is crucial for developing vision AI when real-world data is scarce, as in thermal infrared (IR) aerial vehicle detection. While abundant UAV RGB imagery motivates RGB-to-IR translation for data augmentation, unobservable thermal traits (e.g., engine heat) make learning transferable mappings challenging. This work investigates whether modern generative translators can overcome this cross-modal gap to improve infrared vehicle detection on unseen UAV target domains. Translators are trained on paired RGB-IR source datasets and applied to RGB training images from held-out target datasets to generate synthetic IR data. Evaluated methods include supervised GANs, ControlNet-based diffusion models, and foundation-model editing via LoRA. The resulting synthetic IR imagery is used to train RF-DETR vehicle detectors, which are evaluated on unseen IR target test splits across five aerial datasets, with Kust4K and VTUAV serving as target domains. Synthetic IR consistently outperforms RGB and grayscale baselines. Stable Diffusion 3.5 with ControlNet yields the best results, improving mAP from 50.8 to 60.1 on Kust4K and from 25.6 to 38.4 on VTUAV compared to models trained only on source-domain IR data. Increasing output diversity via multiple seeds (+1.1 mAP) and prompt variations (+3.3 mAP) provides additional gains on VTUAV. Although a performance gap to real target IR data remains, generative RGB-to-IR translation effectively mitigates IR data scarcity and improves cross-domain aerial vehicle detection.

0.13

Physically Guided TeX Generation for Low-Light Visual Tasks

cs.CV ·2026-11-07 ·Daoheng Li, Jianjun Qian, Mengkai Yan, Jian Yang
similarity 0.65
Abstract

Low-light conditions reduce visible contrast and obscure details, while infrared images lack color and texture, motivating the fusion of infrared and visible information for visual tasks. Existing fusion methods primarily optimize image appearance or task-specific features without explicitly disentangling the coupled factors underlying thermal observations, limiting their physical interpretation under thermal degeneracy. Hyperspectral thermal measurements enable physical decomposition, but they require specialized imaging hardware, while pixel-level physical annotations for supervision or evaluation incur additional costs. We propose TeX-Gen, a physically guided framework for TeX generation from paired visible and infrared images in low-light visual tasks. TeX Generation constructs complementary multi-view features and employs independent branch-specific gates to route cues into the Temperature, Emissivity, and Texture maps. TeXMetric integrates radiometric reconstruction, channel structure, and material consistency to assess the generated maps without requiring pixel-level physical labels. TeX Tune improves performance through task-guided adjustments, jointly optimizing the adjustment modules and task network while keeping the generator frozen. Experiments show that TeX-Gen achieves competitive task performance in low-light environments on the FLIR, LLVIP, M3FD, and MSRS datasets. Experiments on HADAR also examine the association between TeXMetric scores and downstream detection performance.

0.14

AstraSR: Real-World Thermal Super-Resolution with GPT-6 Astra

cs.CV ·2026-10-05 ·Mengyuan Li, Changhong Fu, Jun Zhang, Ziyu Lu, Yuhang Zhang +1 more
dataset similarity 0.65
Abstract

Real-world thermal super-resolution (SR) is constrained by limited sensor resolution and the difficulty of obtaining corresponding high-resolution (HR) observations for direct model supervision. Conventional SR methods typically construct training pairs by treating captured thermal images with real-world degradations as HR references and applying predefined degradation to generate synthetic low-resolution (LR) inputs. Such a construction not only introduces a domain gap between synthetic and captured LR observations but also retains acquisition degradations in the supervision. To address this issue, we propose AstraSR, a real-world thermal SR method guided by GPT-6 Astra, a frontier multimodal generative model endowed with emergent and transformative visual capabilities. Specifically, we construct a dataset of image pairs by using captured LR thermal images to condition GPT-based HR reference. We develop a direct generative supervision strategy that learns from captured thermal inputs paired with GPT-generated HR references. Pixel, gradient, and perceptual losses jointly supervise the transfer of intensity patterns, structural boundaries, and visual details from the generated references. Qualitative comparisons with seven existing state-of-the-art real-world SR methods show continuous object contours, distinct structural boundaries, and smooth intensity transitions in the thermal scenes. These results demonstrate that AstraSR outperforms existing real-world SR methods in both thermal clarity and structural coherence.

0.16

What Limits Thermal Infrared Drone Detection? A Cross-Dataset Benchmark Analysis

cs.CV ·2026-11-12 ·Tamara R. Lenhard, Jan Kels, Tobias Koch
publishedbenchmark similarity 0.64
Abstract · Accepted at 2027 IEEE/CVF Winter Conference on Applications of Computer Vision Workshops (WACVW), Workshop "Real World Surveillance: Applica…

Thermal infrared (IR) imaging enables drone detection with reduced dependence on ambient illumination, supporting continuous surveillance beyond the limitations of visible-spectrum sensing. However, substantial and often undocumented variability in camera systems, processing pipelines, and annotation practices across public IR drone datasets complicates the assessment of detector performance and cross-domain generalization. To examine these sources of variability and their implications for drone detection, we systematically characterize existing IR datasets and establish an artifact taxonomy reflecting their origins across the acquisition and processing pipeline, encompassing optical and sensor effects, tone mapping and image enhancement, and recording-related artifacts. Focusing on long-wave IR data, we investigate the impact of training data composition and model characteristics on YOLO-based detection performance, generalization, and condition-dependent failure modes. Our results demonstrate that detection performance is governed more strongly by training data composition than by YOLO generation or model capacity, while cross-dataset generalization exhibits pronounced asymmetries. Even the best-performing configuration fails to detect over 40\% of drones, with elevated miss rates for very small targets, cluttered urban backgrounds, and thermal crossover, highlighting the shortcomings of existing datasets.

0.25

Synthetic Thermal Image Generation for Real-Time Animal Detection Under Low-Visibility Conditions

cs.CV ·2026-09-26 ·James Momoh, Khandaker Mamun Ahmed
published similarity 0.63
Abstract · Accepted at The IEEE Cyber Awareness Research Symposium (CARS), 2026

Wildlife-vehicle collisions remain a significant road safety concern, particularly during nighttime and low-visibility conditions when RGB-based perception systems are often unreliable. Thermal imaging offers a promising alternative for detecting animals under poor illumination. However, the limited availability of annotated infrared animal datasets restricts the development of robust deep learning-based detection models. This paper investigates synthetic thermal image generation as a scalable approach for real-time animal detection under low-visibility conditions. A subset of 514 annotated visible-spectrum animal images from the NTLNP dataset is translated into synthetic thermal representations using CycleGAN-Turbo, while a limited real thermal dataset of 60 images is expanded through thermal-focused augmentation. Multiple object detection architectures, including YOLOv8, YOLOv9, YOLOv10, and RT-DETR, are trained independently on synthetic and real thermal datasets and evaluated using precision, recall, mAP@0.5, mAP@0.5:0.95, model size, and inference latency. Experimental results show that synthetic thermal images provide competitive detection performance, with RT-DETR achieving the highest synthetic-data mAP@0.5 of 0.9613. Models trained on augmented real thermal data achieve the strongest overall performance, with YOLOv10s obtaining 0.9879 mAP@0.5 and 0.9571 mAP@0.5:0.95. Computational analysis further indicates that lightweight YOLO variants provide favorable inference latency, supporting their potential for real-time deployment. These findings demonstrate that synthetic thermal imagery can reduce dependence on scarce infrared datasets and support the development of efficient animal detection systems for future vehicle-mounted wildlife collision mitigation applications.

0.25

Training with synthetic data for drone detection in thermal imagery

cs.CV cs.AIcs.ETcs.RO ·2026-08-18 ·Tanel Liiv, Sander Soodla, Nzamba Bignoumba, Alma M. Liezenga, Toomas Pruuden
top venue similarity 0.63
Abstract · To be presented at SPIE: Sensors + Imaging, Artificial Intelligence for Security and Defence Applications IV

Ground-to-Air (G2A) drone detection in medium- and long-wave infrared (MWIR/LWIR) imagery is challenging due to reduced texture information, sensor noise, weak thermal contrast, and the scarcity of annotated data. This work investigates a synthetic-first training strategy that combines synthetic scene generation with fine-tuning on real data. We show that synthetic data provides an effective basis for learning initial object representations, while real in-domain thermal imagery is still essential for reliable deployment. Even small amounts of real IR data substantially reduce domain gaps. Our experiments indicate that dataset alignment has a stronger impact on performance than model scale. Finally, our analysis of the dataset suggests that semantic alignment in feature space is the strongest predictor of model performance, while radiometric properties such as entropy and dynamic range also contribute to detection robustness. This work provides a foundation for combining synthetic and real IR data for effective G2A drone detection.

0.28

ThermalSplat: Generalizable Pose-Free Gaussian Splatting for Sparse-View Thermal 3D Reconstruction

cs.CV ·2026-11-11 ·Prasanna S, Gopi Raju Matta, Divya Madhuri Vemunuri, Kaushik Mitra
published similarity 0.62
Abstract · WACV 2027

Thermal infrared imaging is vital for applications like search-and-rescue and autonomous navigation, yet trans- lating it into 3D scene representations remains a critical bottleneck. The low-texture nature and view-dependent emissivity of thermal images cause standard pose estima- tors to fail catastrophically, collapsing standard 3D Gaus- sian Splatting pipelines under sparse-view constraints. Fur- thermore, existing thermal reconstruction methods rely heavily on dense capture and computationally expensive per-scene optimization. Critically, many of these ap- proaches depend on aligned RGB-thermal datasets to ob- tain reliable camera poses and initial point clouds, ren- dering them unusable in purely thermal, unposed envi- ronments. To break this bottleneck, we present Thermal- Splat, the first generalizable, feed-forward Gaussian splat- ting framework that reconstructs 3D scenes directly from sparse thermal images without requiring known camera poses, RGB guidance, or per-scene training. We over- come thermal-specific challenges using a soft census loss for brightness-invariant structural matching and a bound- ary structure loss to explicitly supervise temperature discon- tinuities. Trained on an aggregated multi-source dataset, ThermalSplat synthesizes sharp reconstructions of unseen scenes in a single feed-forward pass. Extensive experi- ments demonstrate that ThermalSplat holds a strict advan- tage over scene-specific thermal splatting methods in the sparse regime. Furthermore, even compared against these baselines operating under their ideal dense capture set- tings, ThermalSplat achieves superior perceptual fidelity. By eliminating the need for computationally expensive per scene optimization, ThermalSplat offers an efficient and generalizable approach to thermal 3D reconstruction.

0.24

ProtoFusion: Protocol-Guided Prompt Refinement for Generative Infrared and Visible Image Fusion

cs.CV ·2026-11-02 ·Pengwei Liang, Junjun Jiang, Junhui Hou
code/data similarity 0.62
Abstract

Infrared and visible image fusion integrates complementary information from both modalities to provide a more comprehensive representation of the scene. We propose ProtoFusion, a protocol-guided generative framework for infrared and visible image fusion. Instead of relying on fixed fusion operators, hand-crafted objectives, or manually specified one-shot prompts, ProtoFusion formulates fusion as protocol-constrained generation. It represents fusion intent with a structured protocol, consisting of environment state cards, grounding principles, and a style profile, which explicitly specifies which evidence should be preserved or suppressed and which properties the fused result should satisfy. To optimize this protocol, we introduce protocol-guided prompt refinement, a closed-loop learning framework that iteratively performs generation, evaluation, and revision under multimodal evidence. Once learned, the optimized protocol is fixed at inference time and directly guides fusion generation. To address residual source inconsistencies, we further incorporate structured belief construction, which organizes modality reliability, scene evidence, and cross-modal conflicts into a structured representation for conservative correction after generation. Extensive experiments on standard benchmarks show that ProtoFusion improves quantitative performance, achieves favorable results in aesthetic evaluation, and produces visually coherent fusion outputs. Project Page: {https://erfect2020.github.io/ProtoFusion/}.

0.21