CS Paper Radar

Nonlinear Thermal Modeling and Predictive Control for Spacecraft Optical Temperature Regulation

Marcus C. Klupar, Daniel T. Larsson, Ewan S. Douglas

eess.SY ·submitted 2026-10-05 19:33 UTC · v1
unusual

Abstract

Maintaining a stable thermal environment is critical for spacecraft carrying precision optics, as temperature gradients and thermal expansion can alter the geometric alignment of optical components, compromise wavefront sensing, and degrade image quality even when active thermal systems provide real-time control. In particular, the temperature of the optical payload must be controlled to sub-Kelvin tolerances about the desired setpoint, a requirement that is often difficult to achieve with conventional reactive control methods. To this end, this paper develops a novel nonlinear thermal model for the optical system of a spacecraft, accounting for conduction, radiation, and the changing radiative environment induced by the spacecraft's orbit. Using this model, we develop a model predictive control (MPC) methodology that enables closed-loop thermal regulation of the optical compartment under realistic orbital conditions. Since only partial, noise-corrupted temperature measurements are available, an Unscented Kalman Filter is employed to estimate the full thermal state, yielding a certainty-equivalence MPC controller obtained via recursive online optimization. The thermal model is validated against a high-fidelity thermal simulator, and the proposed approach is compared against conventional PID control, the prevailing method for on-orbit thermal regulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-based Online Adaptive Koopman Model Predictive Attitude Control for Combined Spacecraft with Dynamic Uncertainties

eess.SY ·2026-09-02 ·Yicheng Sun, Yueyong Lyu, Yuhan Liu, Yanning Guo, Wei Pan
top venue similarity 0.53
Abstract · 16 pages, 13 figures, 3 tables

This paper proposes a physics-based adaptive Koopman Model Predictive Control (MPC) strategy for combined spacecraft attitude stabilization under inertia uncertainties and active target maneuverability. A novel, quaternion-based Koopman model is constructed from a set of analytical lifting functions derived from the quaternion kinematics, which provides a more compact and physically interpretable linear representation of the nonlinear dynamics compared with the conventional black-box EDMD and higher-dimensional DCM-based model. Leveraging the linear structure of this nominal model, a gradient descent-based update law is employed to efficiently identify time-varying inertial uncertainties from real-time input/output data. By integrating this adaptive linear model into the MPC framework, the optimal control problem reduces to a computationally efficient Quadratic Program (QP), thereby significantly lowering the online computational burden compared to nonlinear adaptive MPC. Recursive feasibility and regional input-to-state stability are formally established through the design of terminal ingredients for the MPC. The effectiveness and superiority of the proposed strategy are validated through comparative simulations of an attitude stabilization task for combined spacecraft in a high-fidelity 3D simulator.

0.48

Image-Driven Control with Application to Thermoforming

eess.SY ·2026-11-09 ·Junyong Shim, Klaske van Heusden
publishedunusual similarity 0.51
Abstract · 6 pages, 2 figures. Presented at the 23rd IFAC World Congress (IFAC 2026), Busan, Republic of Korea, August 2026

This paper proposes Image-Driven Control (IDC), an approach to vision-based feedback that operates directly in the image space. IDC offers a direct end-to-end solution in the behavioral framework. Targeting a limited subset of vision-based feedback problems, including applications in manufacturing, the IDC design builds on a computationally advantageous subspace predictive control formulation and offset-free tracking to enable reference tracking in the image space under input and pixel-level constraints. IDC provides a control-theoretic alternative to vision-based feedback systems, enabling improved transparency for analysis and tuning of end-to-end control. It offers straightforward experiment design, an advantage in applications where data collection is expensive. The effectiveness of IDC is shown in a simulation example using a nonlinear high-fidelity model of the heating phase of the thermoforming process.

0.34

Adaptive Relative Orbit Control Considering Laser Ablation Uncertainty

eess.SY ·2026-08-17 ·Shun Isobe, Yasuhiro Yoshimura, Toshiya Hanada, Yuki Itaya, Tadanori Fukushima
published similarity 0.51
Abstract · Accepted for publication in Acta Astronautica

This study proposes a relative orbit control law for laser debris removal missions considering the uncertainties of laser ablation and atmospheric drag. A removal spacecraft irradiates laser pulses to a target debris to generate the ablation force for deorbiting. The deorbiting force lowers the target altitude, and the removal spacecraft must follow it to maintain its relative position for continuous laser irradiation. The difficulty stems from uncertainties of the magnitude of laser ablation and external disturbances such as atmospheric drag. To tackle this problem, this study derives an adaptive control method using the Gaussian process regression to cancel the uncertainties with a nonparametric regression model. Numerical simulations verify the proposed control law under the uncertainties of laser ablation and atmospheric drag. The proposed control law can contribute to the realization of a safer and more secure mission not only for laser debris removal missions, but also for other on-orbit services.

0.47

Robust Mode Transition for Spacecraft Attitude Control

eess.SY ·2026-09-22 ·Emily Burgin, Carl-Johann Winkler, Felix Biertümpfel, Harald Pfifer, Pedro Simplicio
highly cited similarity 0.51
Abstract

This paper proposes the design of a single linear parameter-varying (LPV) controller for the combined control and smooth transition between two modes in a spacecraft mission. Current industry practice for transitioning between different controller modes is to use a discrete switching approach. When predefined criteria are satisfied, the controller of one mode is turned off and the controller of the other is initialised, resulting in an undesirable transient behaviour. In addition, each controller must individually undergo a rigorous verification and validation (V&V) process. A single controller synthesised using LPV methods streamlines the V&V process and improves the transient behaviour. The proposed design follows a mixed-sensitivity control scheme with LPV weights that are derived from the performance and robustness requirements of the individual modes. The controller is synthesised by minimising the induced $\mathcal{L}_2$-norm of the closed-loop interconnections between the controller and weighted plant. The performance and robustness of the controller is demonstrated on an acquisition and pointing task of a flexible satellite through a Monte-Carlo campaign.

0.47

Learning in Orbit: Onboard Training and Closed-Loop Attitude Control with a Thermal Segmentation Model on a Spacecraft

cs.RO cs.AIeess.SY ·2026-10-13 ·Elena Sorina Lupu, Hannah Grauer, Phaedrus Leeds, Nikhil Ranganathan, Connor Lee +7 more
code/data similarity 0.51
Abstract

Deep space missions increasingly require spacecraft capable of autonomously operating in environments with communication delays and bandwidth limitations. A key enabler of such autonomy is the ability to run learning-based algorithms directly onboard. In this work, we present a flight deployment on a 6U CubeSat that demonstrates (1) onboard training and inference of a thermal segmentation model on an NVIDIA Jetson TX2 NX GPU in space and (2) closed-loop attitude control using the segmentation model on a real-time, thermal image feed to track the Moon. In addition to this demonstration, we implement ROS 2 Foxy as a data transport middleware and integrate an open-source file system that provides strong data integrity guarantees and self-healing features. Over the course of approximately one year, we performed 12 experiments on the spacecraft, advancing the state of the art in autonomous spacecraft systems by showing how modern learning-based pipelines, commercially available hardware, and open-source software can operate reliably under the compute and environmental constraints of Low Earth Orbit (LEO).

0.30

Finite sample guarantees of MPPI: suboptimality, sample complexity and closed-loop guarantees

eess.SY math.OC ·2026-11-17 ·Changyi Lei, Dragan Nesic, Ye Pu
theoryhot direction similarity 0.50
Abstract

This paper considers model predictive path integral (MPPI) control for nonlinear finite-horizon optimal control problems with bounded inputs, allowing nonconvex and nonsmooth costs. We prove theoretical guarantees that quantify the suboptimality caused by positive temperature and finite sampling on MPPI and establish their implications for closed-loop guarantees. Specifically, we derive a suboptimality bound for infinite-sample MPPI that characterizes the effects of temperature and prior coverage, followed by a high-probability finite-sample approximation error bound that reveals the dependence on sample size, temperature, and cost variability. By incorporating these bounds into a terminal-constraint-free MPC framework, we further establish semi-global practical recurrence of the closed-loop system. Numerical examples involving a four-link planar manipulator illustrate the temperature-sampling tradeoff and the influence of prior quality on approximation accuracy and closed-loop performance.

0.31

KOOPMAN-Luenberger Observer Design for Nonlinear Systems with Application to the Monitoring of a Latent Thermal Energy Storage

eess.SY ·2026-08-11 ·Mustapha Habib, Dario Aguiar, Esther Kieseritzky, Tilman Barz, Qian Wang
similarity 0.49
Abstract

State estimation for nonlinear dynamical systems remains a fundamental challenge, particularly when measurements are sparse and internal states are inaccessible. This work presents a KOOPMAN-based Linear State Observer (KOOPMAN-LSO) design framework that enables linear observer synthesis for nonlinear systems through KOOPMAN operator theory. The nonlinear dynamics are lifted into a higher-dimensional observable space using physics-informed basis functions, where a linear predictor with control is identified via extended dynamic mode decomposition with control (eDMDc). A discrete-time Luenberger observer is then constructed in the lifted space, and the observer gain is obtained through a dual linear - quadratic regulator (LQR) formulation to ensure stable and tunable estimation error dynamics. The proposed framework combines the representational capability of KOOPMAN lifting with the simplicity and computational efficiency of linear observer design, providing a systematic approach for nonlinear state estimation under limited sensing. Its effectiveness is demonstrated on a latent thermal energy storage (LTES) system based on phase-change materials (PCM), where internal temperature states are not directly measurable. Experimental results under varying operating conditions show accurate reconstruction of unmeasured states from limited output measurements, illustrating the potential of KOOPMAN-LSO design for practical nonlinear systems. The proposed approach achieves high-fidelity reconstruction with an RMSE as low as 0.0819 °C for the LTES outlet temperature and generally below 1.0 °C for observable internal PCM temperatures.

0.04

ADACT: PDE-Constrained Thermal Hardware/Software Co-Design Adjoint-Driven Optimal Control via Finite Difference Discretization

cs.AR math.OCeess.SYmath.NA ·2026-10-26 ·Don Li
similarity 0.49
Abstract

By virtue of the sheer compute demands of large-scale artificial intelligence (AI) and high-performance computing (HPC), modern multi-core microprocessors suffer from severe power density limits and thermal throttling, entailing an urgent need for principled methods for predictive, physics-informed dynamical thermal management (DTM). Here, we introduce a hardware/software co-design physics-informed PDE-constrained DTM throttling optimal control algorithm, ADACT (Adjoint-Driven Adaptive Co-Design Thermal Control), that minimizes thermal risk and cooling energy overhead while maximizing core execution throughput. The underlying physical temperature field is governed by a two-dimensional nonhomogeneous parabolic reaction-diffusion equation with spatially localized, time-varying power source terms and variable convective cooling subject to nonhomogeneous Dirichlet boundary conditions. We employ a discretization of the continuous state PDE via a Crank-Nicolson finite difference scheme with a 5-point discrete Laplacian operator on a uniform spatial mesh, which preserves unconditional numerical stability and $O(Δx^2 + Δy^2 + Δt^2)$ second-order temporal and spatial accuracy. To efficiently compute exact gradients, we construct and implement a continuous backward-in-time adjoint state method with L-BFGS as our optimization algorithm of choice. The accuracy and second-order convergence rates of both forward state and backward adjoint solvers are quantitatively verified via the Method of Manufactured Solutions (MMS), and gradient accuracy is validated using directional derivative Taylor tests. Numerical experiments demonstrate that ADACT dynamically throttles software power workloads and modulates hardware cooling efforts to strictly uphold physical thermal thresholds while maintaining operational throughput.

0.28