CS Paper Radar

Targeted search shows that random-device testing underestimates worst-case error in a simulated wave-based neural operator

Samrendra Roy, Jason Yoo, Souvik Chakraborty, Syed Bahauddin Alam

cs.LG cs.ETphysics.optics ·submitted 2026-10-05 23:53 UTC · v1
theory

Abstract

Wave-based processors promise fast, energy-efficient Fourier layers for neural operators. They are usually validated on randomly sampled devices, but using them requires knowing how large their error can become under fabrication and alignment variation. In a stylised numerical case study, a hybrid Fourier neural operator runs its four spectral layers on simulated coherent 4f processors with 32 toleranced knobs, whose half-widths are representative rather than calibrated. For 120 models (four tasks, six training methods, five seeds), we compared the worst of N random in-spec devices with a searched one. On a deterministic simulator with one frozen draw of the random static errors, the searched device's held-out error was 1.08-3.10 times the maximum over 200 Monte Carlo devices and 1.06-2.71 times that over 1000. With 20 fresh static draws, it still exceeded the maximum over 200 random devices in 116 of 120 models. Under uniform sampling, the probability of drawing such a device is at most 0.37% per model (two-sided 95% Clopper-Pearson), which says nothing about how large its error is. The gap persisted with uniform or Sobol' sampling at the search's budget, shared knobs, a second crosstalk model, box scales of 0.25-2 and a pixel-level device model. Models trained only with random static errors reached 3.7-39.9 times their nominal error on searched devices, and fine-tuning on random and gradient-searched devices gave the lowest searched error of the six in all 20 task-seed pairs. For two heat-exchanger quantities, a search targeted at each exceeded the worst of 1000 random devices in all 39 models, and hence the Wilks 95/95 limit (worst of 59). For the mean pressure of 11 models, no random device exceeded a 1% error threshold, but the searched device did. Random testing estimates how often errors exceed a threshold; worst-device search gives a lower bound on how large they can be.

Comment
50 pages (19 main text and references, 31 Supplementary Information), 5 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Performance of Neural Operator Baselines on 'The Well' Dataset

cs.LG ·2026-10-25 ·Yash Pincha, Andy Dimnaku, Andrew Chiang, Adarsh Ganeshram, Valentin Duruisseaux +1 more
benchmark similarity 0.59
Abstract

The Well, a 15-terabyte dataset spanning 16 physical simulation domains, provides an extensive benchmark for developing and evaluating machine learning surrogate models for complex physical systems. The baselines released with the benchmark were presented by their authors as illustrative examples obtained at small computational cost, trained with zero to very limited hyperparameter tuning and under a highly constraining 12-hour per-run wall-clock limit. These results have subsequently been treated as fully tuned benchmarks, and in some cases effectively interpreted as unconstrained performance baselines. We perform a short non-exhaustive hyperparameter search for the Tucker-factorized Fourier Neural Operator (TFNO) under the same 12-hour per-run wall-clock limit, while using only a single input timestep rather than the history of up to four used by the published baselines. Despite this more restrictive setup, tuning alone reduces VRMSE below both published FNO and TFNO baselines on 15 of 17 tasks, sometimes by several orders of magnitude. This sensitivity to a modest tuning effort underscores that the released neural operator baselines should not be treated as architectural benchmarks.

0.12

From Numerical Simulators of PDEs to Neural Emulators and Back

cs.LG ·2026-08-25 ·Felix Koehler
similarity 0.59
Abstract

Simulation is central to modern engineering and science, but the cost of numerical solvers for partial differential equations (PDEs) remains a bottleneck whenever fast or many-query evaluations are required. Neural emulators trained on solver-generated data promise significant speedups, yet they are usually framed as opaque alternatives to the very methods that produce their training signal. This thesis argues the two paradigms are more alike than different: neural architectures mirror classical discretizations, their errors are amenable to the same spectral analysis, and insight flows profitably in both directions. We approach the relationship by disentangling the multiple roles a solver plays in the emulator learning pipeline. Mode-wise Fourier analysis then provides a common language in which solver errors, architectural inductive biases, and training objectives can all be read off simultaneously. Taken together, this allows synthesizing three contributions. (1) APEBench, a comprehensive benchmarking suite for autoregressive neural emulators of PDEs that uses fast differentiable pseudo-spectral solvers in JAX. (2) Progressively Refined Differentiable Physics, an investigation of the effect of unconverged solvers on surrogate training. (3) Neural Emulator Superiority, an analysis of the influence of numerical errors and architectural inductive biases.

0.23

Selection, Representation, and Execution in Sparse Fourier Neural Operators

cs.LG math.NA ·2026-08-30 ·Abdul Qadir Ibrahim, Martin Burger
similarity 0.57
Abstract · 21 pages, 11 figures

Sparse representations are often expected to make models smaller and also reduce inference cost. For Fourier Neural Operators (FNOs), these objectives are not equivalent or do not always align: removing parts of the learned operator can leave the underlying transforms and dense computations unchanged, while changing the grid on which the model is evaluated can introduce overhead of its own. We therefore distinguish sparsity in the representation, in the stored parameters, in the theoretical operation count, and in measured runtime, and present an empirical study of several routes toward sparse FNOs that tests each transition between them separately. Coarsening the execution grid reduces the theoretical cost without reducing measured latency, and adding a correction term recovers accuracy at the cost of making the model slower. Even an 83\% parameter reduction remains slower than the dense baseline under ordinary execution. These results motivate a stricter definition of useful sparsity: the deployed operator must preserve solution accuracy and map its reduced support to a genuinely cheaper execution path.

0.38

The Symbol of the Surrogate: Measuring Numerical Provenance in Neural PDE Solvers

cs.LG math.APstat.ML ·2026-10-07 ·Ridham Patel
published similarity 0.56
Abstract · Accepted at NeurIPS 2026 AI for Science Workshop

Neural PDE surrogates are trained on numerical solver outputs that contain both physical evolution and solver-specific discretization errors. Because surrogates are also evaluated against held-out trajectories from the same solver, standard benchmarks cannot distinguish fidelity to the exact evolution from imitation of the numerical scheme. We introduce an empirical Fourier-symbol diagnostic that probes a trained surrogate's linearized one-step operator with individual Fourier modes and compares it with both exact-evolution and training-scheme references. To address architectural spectral bias, we train identical networks on schemes with orthogonal dissipative and dispersive signatures and compare their learned operators. In linear advection, the learned surrogates reproduce the training schemes' amplitude and phase errors, with the twin-scheme difference reaching more than 99.8\% of the analytically predicted full-imitation ceiling. The same behavior occurs for a non-local Fourier neural operator and at the operator level for nonlinear Burgers dynamics. These results show that agreement with solver-generated test data does not by itself establish fidelity to the exact evolution. Fourier-symbol measurements provide a direct diagnostic of numerical provenance.

0.17

Separating learning from search and feedback in budgeted inverse design of periodic unit cells

cs.CE cs.LG ·2026-11-16 ·Shaoliang Yang, Jun Wang
similarity 0.55
Abstract · 49 pages, 11 figures, including Supplementary Information

To design a periodic material, engineers choose the shape and dimensions of a repeating cell to meet target properties. With few simulations, the benefit of a learned predictor can be hard to separate from the effect of which designs the search tries and how it uses simulator feedback. We compare two ways to predict properties in a library of 80 cell architectures, with up to 30 simulator calls per target. For each architecture, both searches use a table of predicted properties at different dimensions. One fills the table with predictions from neural networks. The other fits a simple model to the existing simulations for that architecture. Both searches use the difference between the predicted and simulated properties to adjust the next design. We generated 200 targets from simulated designs after fixing the analysis plan. The two searches showed no detectable difference in how often they matched all three properties within 2% or in the mean error of their returned designs. The upper limit of the 95% confidence interval for the gain in overall success rate was 4.5 percentage points. Follow-up controls on these targets changed success from 83.5% to 36.0% with a degraded table and 96.5% with an oracle table. In separate tests, using the simulation result to adjust the next design increased success for both types of table. Results cover one library and a coarse 32^3 voxel simulator. Designers can use this comparison to judge what a learned predictor adds when the search, feedback and budget are the same.

0.48

Architecture-Aware Mixed Precision for Replica-Exchange Training of Geometry-Aware Neural Operators with Uncertainty Quantification

cs.LG ·2026-11-02 ·Ujin Jeon, Michael Penwarden, Wenqian Chen, Guang Lin
similarity 0.54
Abstract

Geometry-aware neural operators face substantial computational and memory demands when learning across complex physical domains. We introduce Architecture-Aware Mixed Precision (AA-MP), a replica-exchange training strategy that allocates numerical precision according to replica roles and architecture-specific operations. By retaining FP32 for refinement while selectively employing BF16 for exploration, AA-MP preserves predictive accuracy while improving training efficiency. Across fluid dynamics and three-dimensional structural mechanics benchmarks, AA-MP achieves comparable accuracy to full-precision training over an ensemble of runs, while reducing hot-replica peak GPU memory by 46.9% and training time by up to 25.8%. It also outperforms naive Automatic Mixed Precision (AMP) in memory efficiency and computational cost, with increasing memory advantages at larger model and geometry scales. Ablation studies show that retaining FP32 in the cold-replica is important for predictive accuracy, while additional FP32 operations in the exploratory replica provide limited benefits relative to their computational cost. Finally, conformal prediction for uncertainty calibration shows that AA-MP achieves near-nominal coverage with narrower prediction intervals than the alternatives. These results advance the scalability of geometry-aware scientific machine learning by reducing computational costs without compromising predictive accuracy or uncertainty quantification.

0.22

Neither Precision Nor Architecture Alone: Controlled Tests of Failure Remedies for Physics-Informed Neural Networks

cs.LG cs.AI ·2026-08-26 ·Jinyuan Zhang, Peng He, He Hu, Yin Yuan, ShengShuo Jiao
similarity 0.54
Abstract · 11 pages, 5 figures, 6 tables; appendix with full proofs included

Physics-Informed Neural Networks (PINNs) frequently fail on stiff or advection-dominated PDEs, and two recent accounts offer competing remedies: switching from FP32 to FP64 to repair an L-BFGS stopping artifact, or replacing the MLP with a state-space-model (SSM) backbone plus sub-sequence alignment to counter architectural simplicity bias. We test both under matched, seed-paired controls in a pre-registered 144-run study spanning convection, reaction, and wave, plus an independent 85-run convection/wave study; success is relative $\ell_2$ error below $0.05$. The two remedies act on disjoint regime-and-seed slices: neither substitutes for the other. On hard convection ($β{=}50$), alignment recovers 2/5 seeds in FP32 and 3/5 in FP64, where the unaligned SSM succeeds on 0/5 seeds at either precision and the vanilla MLP moves only from 0/5 to 1/5 across the precision switch---the recoveries trace to the alignment objective, not the backbone. On reaction the backbone alone already succeeds on 3/5--4/5 seeds, so each remedy covers a regime the other does not. Responses are also seed-specific: the same precision switch flips individual seeds in opposite directions and, on wave, lowers median error with no statistically significant success gain. Tightening the inner L-BFGS tolerance in an independent repeated-step runner likewise lowers median error at a large runtime cost, with success counts unchanged. Precision, stopping, backbone, and alignment must therefore be evaluated jointly and reported per seed.

0.37

When Does Frequency Decomposition Benefit Physics-Informed Neural Networks? A Preliminary Ablation Study

cs.LG cs.AI ·2026-08-24 ·Shubham Rai
benchmarkhot direction similarity 0.54
Abstract

Partial differential equations (PDEs) often have high-frequency and multi-scale features that neural networks struggle to approximate. Physics-Informed Neural Networks (PINNs) build the governing equations directly into training, but suffer from spectral bias: they learn low-frequency components faster than high-frequency ones. Techniques such as Fourier feature embeddings and sinusoidal activations address this, but most studies assume they help across the board without checking which spectral regimes actually benefit. We introduce a dual-branch, spectrally-gated architecture (DBSG-PINN) that splits low- and high-frequency components into separate subnetworks joined by an adaptive gate, and use it to run a partially controlled ablation of frequency decomposition and spectral routing. We test this on five one-dimensional benchmark PDEs, ranging from smooth, single-scale problems to oscillatory, multi-scale ones. Frequency decomposition helps most on the spectrally complex benchmarks, cutting relative $L_2$ error by up to $59.2\%$ on a multimodal wave problem, but gives little benefit on smoother PDEs. On one benchmark (1D Wave), it performs substantially worse than a simpler fixed-combination variant. The gate's benefit scales with how spectrally rich the target solution is: the full model's advantage over the ablations is largest on multi-scale benchmarks and smallest (or negative) on single-scale ones, consistent with the gate exploiting frequency structure rather than acting as noise,though we do not directly visualize or quantify its spatial activations in this study. All results come from a single training seed across five 1D benchmarks, so we present this as an exploratory study meant to raise questions rather than answer them, and outline the additional seeds and benchmarks needed to test whether the pattern holds.

0.32