CS Paper Radar

Hybrid++: The Bridge between PDE Models and Deep Learning for Gamma Noise Removal

Mahipal Jetta, Sujato Dutta

eess.IV cs.AI ·submitted 2026-10-06 16:21 UTC · v2
publishedbenchmark

Abstract

Multiplicative gamma noise is one of the dominant noise factors in Synthetic Aperture Radar (SAR) and medical ultrasound images. They are dependent on pixel level noises due to which they are highly varying across the image and harder to handle as compared to additive noise. The denoising methods to address this noise currently include classical partial differential equation (PDE) methods which are good for interpretation but lack the restoration ability as compared to the state-of-the-art models while deep neural networks like DnCNN achieve high performance but at the cost of transparency due to which practitioners are skeptical to use them in high-risk critical fields like medicine. This paper presents Hybrid++, a novel trainable nonlinear reaction-diffusion architecture that addresses both the concerns - staying interpretable while offering performance close to huge black-box models. It combines a fully learnable PDE initialization with a 3-stage reaction-diffusion network having 64-channel multiscale filter banks, 4-layer Squeeze-and-Excitation attention-based influence functions and a 64-dimensional noise level embedding. It uses a two-phase training strategy, stage-wise optimization followed by joint end-to-end refinement which enables co-adaptation of all learnable parameters. On the FoE benchmark, Hybrid++ substantially improves over classical PDE, BM3D and the original TNRD baselines. In the severe-noise setting L=1, it comes within 0.23 dB PSNR of a separately trained DnCNN while using only about 8% of its parameters.

Comment
Accepted at the International Conference on Computer Vision and Image Processing (CVIP 2026). Revised version incorporating camera-ready changes

Closest papers

Nearest neighbours by meaning across the whole index.

A Study of the Limits of Collaborative DCT-Based Image Denoising via Interpretable Neural Networks

cs.CV ·2026-09-24 ·Cristian Comellas, Julia Navarro, Antoni Buades
similarity 0.60
Abstract · Preprint submitted to Journal of Mathematical Imaging and Vision (JMIV). 17 pages, 11 figures. Supported by MCIN/AEI/10.13039/501100011033 u…

Image denoising remains a fundamental problem in image restoration, with applications in photography, biomedical, and scientific imaging. Modern deep neural networks achieve strong performance by learning powerful image priors, but often rely on large black-box models with limited interpretability. In contrast, DCT-based sliding-window and collaborative filtering methods such as BM3D offer clear algorithmic structure, but depend on handcrafted and non-differentiable operations. This work studies how far such structured collaborative filtering principles can be pushed when reformulated as trainable models. We introduce DeepBM3D, a compact fully differentiable architecture that combines non-local patch grouping, DCT-domain filtering, and multi-stage refinement within a BM3D-inspired pipeline. Lightweight convolutional feature extractors guide patch grouping, while filtering is performed through learned Wiener weights in the DCT domain. Experiments show that DeepBM3D improves over classical and hybrid baselines, remains competitive with FFDNet at low and moderate noise levels, and performs particularly well on repetitive textures.

0.26

Diffusion Meets Unrolling: Compressive SAR Image Reconstruction with Interleaved Learned Corrections

eess.IV ·2026-10-05 ·Odysseas Pappas, Andrew C. M. Austin, Perla Mayo, Mohammad Golbabaee, Alin Achim
similarity 0.60
Abstract

Compressive Synthetic Aperture Radar (SAR) imaging, typically formulated as an inverse problem and solved with traditional iterative optimisation methods, can be very computationally expensive. We investigate the use of denoising diffusion probabilistic models (DDPMs) for compressive SAR image reconstruction, where the diffusion model is guided by a poor initial reconstruction from sub-sampled data obtained via standard imaging methods. We augment this data-driven method with model-driven interleaved refinement processes, inspired by traditional compressed sensing (CS) methods, to enhance sparsity and heavy tails in SAR images. Experimental results on real ERS-1 SAR datasets demonstrate consistent improvements over baseline DDPM and state-of-the-art methods, with notable gains in reconstruction fidelity and structural similarity, while incurring only modest computational overhead. The proposed hybrid framework effectively combines the representational power and efficiency of diffusion models with the interpretability and robustness of model-based optimisation, enabling accurate compressive SAR imaging.

0.30

3D Diffusion Models for Medical Imaging

cs.CV ·2026-10-19 ·Frank-Peter Schilling, Daniel Barco, Philipp Denzel, Marc Stadelmann
publishedsurvey similarity 0.60
Abstract · 27 pages, accepted for publication in Informatics in Medicine Unlocked

Generative deep learning methods such as Variational Autoencoders, Generative Adversarial Networks or Diffusion Models have achieved remarkable results in image synthesis. In particular, Diffusion Models have demonstrated superior image fidelity and sample diversity compared to other approaches on standard benchmarks, while also offering more flexible training dynamics as evidenced both in natural image domains and in medical applications. In medical imaging including Computed Tomography, Magnetic Resonance Imaging or Positron Emission Tomography, such models have various important use-cases including data augmentation, domain transfer, image reconstruction, inpainting, image augmentation and artifact correction. Further, generated images can be conditioned on patient characteristics, medical reports, segmentation masks or other images. Specific challenges arise due to the 3D volumetric nature of medical images, which translate to substantial demands in terms of memory, compute, and training data. This article provides a comparative overview of 3D Diffusion Models which have been developed for medical images, with a focus on current performance, limitations, and an outlook for future work.

0.23

Local gradient neural operator

cs.LG math-ph ·2026-09-07 ·Baiming Zhang, Jinsong Tang, Ying Xu, Lihua Chen, Shiying Xiong
code/data similarity 0.59
Abstract · 29 pages, 11 figures. Code available at https://github.com/baiming-zhang/LGNO

Field temporal prediction and source identification constitute canonical problems in dynamical systems. Conventional approaches to these problems depend on a thorough understanding of the governing partial differential equations (PDEs). Recently, deep learning, as represented by neural operators, has provided a data-driven paradigm for addressing such tasks. However, most existing global neural operators for PDEs require large training datasets and many learnable parameters, with limited interpretability and generalization. We propose the local gradient neural operator (LGNO) as a lightweight and interpretable alternative for field temporal evolution prediction and source identification in typical mechanical problems. The method builds on priors from nonlinear gradient discretization and uses multilayer perceptron convolutional layers to learn translation-invariant local kernels that resemble discrete stencils. A zero consistent stencil factorization separates coefficient learning from field reconstruction, rendering the learned operators more transparent. For problems with symmetries, network folding shares equivalent components and reduces parameter counts. We evaluate the method on PDE benchmarks covering linear and nonlinear, static and dynamic, and low and high dimensional cases. Results show that LGNO maintains accuracy, parameter efficiency, and rollout stability across these tasks, and further exhibits wide applicability to mechanical problems including diffusion, flow, and quantum phenomena.

0.31

Physics-informed denoising method for image reconstruction in quantitative low-field MRI

eess.IV ·2026-09-11 ·Catarina Redshaw Kranich, Claudia Prieto, Christoph Kolbitsch, Felix Frederik Zimmermann
similarity 0.59
Abstract

Low-field magnetic resonance imaging (MRI) is becoming increasingly important for medical imaging because it can reduce healthcare costs while ensuring high diagnostic output. Nevertheless, quantitative imaging in low-field MRI faces challenges, such as low signal-to-noise ratio and long scan durations. Deep learning approaches have been proposed for image reconstruction to overcome these challenges. Still, deep learning often requires large high-quality training datasets which are usually not available for low-field applications. Here we propose a modular unrolled end-to-end deep learning method for the denoised reconstruction of quantitative parameter maps directly from k-space data for low-field MRI. It consists of three sub-networks that are iteratively applied. They are used for the regularization of the quantitative parameter estimation, as well as for the signal estimation that is based on simulated signal curves. It generalises well and can be applied to different field strengths and even different quantitative MR sequences without the need for new training data. We applied the presented method to noisy data of knees acquired at 0.55 T for the reconstruction of $T_2$-maps and compared it to other classical and deep learning methods. We also applied the proposed approach to $T_1$-mapping of knees at 72 mT and $T_2$-mapping of brains at 0.6 T. The presented approach outperforms the other reconstruction methods with a median difference below 4 ms to the ground truth $T_2$-map. Even though the network was trained with $T_2$-maps acquired at 0.55 T, it successfully denoised data acquired at different field strengths, sequences, and of different anatomies. As a result, the proposed network and its underlying method offer an efficient and flexible solution to denoise low-field MR data and make quantitative low-field MRI a feasible diagnostic tool for clinical applications.

0.13

Optimization of Deep Learning Model for Denoising Dose Profiles in Proton Therapy

eess.IV q-bio.QM ·2026-09-30 ·Junaid Jawaid, Matteo Spezialetti, Gabriele Libardi, Giovanni Stilo, Filippo Mignosi
similarity 0.59
Abstract

Proton therapy offers a dosimetric advantage over conventional radiotherapy through the Bragg peak, enabling precise dose delivery to the tumour while sparing surrounding tissue. Monte Carlo (MC) simulation provides the most accurate dose calculation but is computationally expensive for clinical workflows. A promising compromise is to simulate with a reduced number of primary histories and recover a high-quality dose distribution through a deep learning denoising step. In this work, we take a 3D multiscale U-Net from recent literature as a case study and investigate two improvements critical for clinical deployment. First, we replace the standard MSE training objective with a differentiable $γ$-index-based loss, extended to native 3D operation, and demonstrate that directly optimising the clinical evaluation metric yields a mean Gamma Passing Rate of 99.47\% at 2mm/2\% and 95.67\% at 1mm/1\% on the test set, compared to 92.10\% and 71.13\% for MSE. Second, we apply L1-norm structured filter pruning to reduce the model's memory footprint, achieving a 13.3\% parameter reduction with negligible performance loss under partial pruning, and 20\% reduction under full-block pruning after fine-tuning.

0.09

A deep dictionary network-based foundation model for ultra-low-dose CT denoising

eess.IV cs.CVcs.LG ·2026-09-11 ·Baoshun Shi, Shuangyi Yang, Ke Jiang, Bin Zhu, Zhanli Hu +1 more
similarity 0.58
Abstract

Ultra-low-dose computed tomography (ULDCT) reduces radiation exposure but suffers from severe noise that degrades diagnostic image quality. Existing deep learning-based denoising methods are typically trained in an organ-specific fashion, resulting in limited generalization across heterogeneous multi?organ imaging scenarios. Foundation models present a promising all-in-one paradigm for unified multi-organ denoising. However, their architectures suffer from poor interpretability and rely on heuristic training strategies. To address these limitations, we propose an architecture?interpretable foundation model based on the deep dictionary network (DDN) for unified multi-organ ULDCT denoising. Inspired by multilayer sparse representation theory, DDN cascades convolutional sparse coding layers with iterative soft-thresholding, providing inherent architectural interpretability. Furthermore, a dynamic dictionary module and a threshold generation module are embedded within each layer to enhance representation ability. We conduct DDN pre-training on more than one million multi-organ normal-dose CT images by recovering clean images from Gaussian-noised inputs. Sparse regularization is additionally imposed on latent feature representations, guiding the network to learn compact and noise-robust priors. The complete architecture is jointly fine-tuned on multi-organ ULDCT datasets, enabling a single unified model to perform denoising across diverse anatomical regions. Extensive experiments validate that our proposed method achieves state-of-the?art performance and consistently surpasses competing ULDCT methods across all mul

0.28

Coarse-to-Fine Diffusion with Residual Prior for Low-Dose CT Denoising

eess.IV ·2026-09-30 ·Ping Wu, Pengcheng Zheng, Jiahao Zhang, Bohao Chen, Yazhou Ren +1 more
similarity 0.58
Abstract · 10 pages

Low-dose CT (LDCT) reduces radiation exposure but often introduces severe noise and streak artifacts that obscure subtle anatomical structures. Existing diffusion-based denoising methods commonly rely on implicit assumptions about the noise distribution, which may not hold in practical LDCT scenarios and can degrade denoising performance. To address this limitation, we propose a Residual-Guided Diffusion framework that effectively incorporates an explicit difference prior to inform the diffusion process of noise distribution. The difference prior is computed as the residual between the LDCT image and a coarse clean estimate, constraining diffusion sampling to a plausible residual space. We further adopt a coarse-to-fine strategy in which a pre-trained RED-CNN provides the coarse estimate to anchor global anatomy, and the diffusion model refines the remaining details under the prior guidance. For efficiency, we employ accelerated sampling with 20 steps at inference. Experiments on three representative datasets demonstrate that our approach outperforms existing methods in both quantitative and qualitative performance measures.

0.14