CS Paper Radar

REFIT: Recognize, Fix, and Test Wearable Sensor Placement Shifts without Labels

Bangxun Tang

cs.LG cs.HC ·submitted 2026-10-06 18:49 UTC · v1

Abstract

We present REFIT, an input calibration for frozen activity-recognition models whose inertial sensors are worn differently at deployment than in training. When users move a watch to the other wrist or put a strap sensor back on turned, the model sees the same motion on changed axes. REFIT undoes such shifts without labels or retraining. It describes them by families of axis transforms, such as reflections and rotations, and fits each family to the user's data so that simple statistics match those of the training data. The family that removes most of the mismatch names the shift. REFIT fixes the shift by applying the best member of that family before the frozen model and re-estimating its normalization statistics. It tests the fixed model with a label-free accuracy estimate and asks the user to re-wear the sensor when it is low. Experiments on real left/right sensor pairs and on real and simulated re-attachment show that REFIT outperforms label-free test-time adaptation methods on every dataset and restores most of the accuracy lost to re-attachment. It names injected shifts far more reliably than a confidence-based selector. After a correction over all signed permutations of the axes, the estimate separates successful from failed corrections.

Comment
25 pages, 5 figures, 14 tables. Under review

Closest papers

Nearest neighbours by meaning across the whole index.

ArmPoser: Real-Time, Calibration-Free Arm Pose Estimation from Smartwatch IMU

cs.CV cs.HC ·2026-09-08 ·Bishnu Dev, Vasco Xu, Xi-Aan Loh, Chenfeng Gao, Henry Hoffmann +1 more
published similarity 0.66
Abstract

Arm pose estimation enables applications in fitness, extended reality input, rehabilitation, and life logging. Prior smartwatch-based approaches rely on calibration poses and preprocessing pipelines that transform raw IMU measurements into standardized training formats. These steps hinder deployment in everyday settings and introduce errors due to imperfect calibration and sensor drift. We present ArmPoser, a calibration-free arm pose estimation system using a single smartwatch IMU. Our central contribution is training models directly in the reference frame native to consumer smartwatches, aligning learning with how IMU data is produced by deployed devices. By operating on device-native axes, ArmPoser removes the need for coordinate transformations, explicit alignment, and bone-offset calibration used in prior work. We further augment training with physically grounded variations in watch placement and arm morphology to account for user-specific variability. ArmPoser also includes a wear-configuration module that infers anterior or posterior forearm placement and crown orientation. We evaluate pose estimation on public benchmarks and on a 10-participant, 30-activity study using watchOS and Android smartwatches, where ArmPoser matches or exceeds calibrated baselines without any user calibration.

0.28

WearableBridge: Task-Guided Latent Transport for Free-Living Activity Recognition

cs.LG ·2026-11-06 ·Jingjing Zou, Yixin Wang
code/data similarity 0.64
Abstract · 26 pages, 5 figures, 11 tables. Code and interactive demo: https://github.com/jingjingz/WearableBridge

Wrist-worn accelerometers make activity monitoring feasible at scale, but incidental arm motion, device orientation, and shifting context blur the signal that separates activities. Calibration studies supply higher-quality references such as concurrent thigh recordings or supervised laboratory wrist sessions, but they are expensive, cover few participants, and are rarely available at deployment. How can limited reference data improve recognition for participants who wear only a wrist device? We propose WearableBridge, which holds the reference encoder and classifier fixed and learns a task-guided transport map, the bridge, that carries each wrist feature into the region the classifier associates with its activity. Reference features or the classifier's predictions indicate the destination, and a classification loss penalizes wrist features that land in the region of another activity. We instantiate WearableBridge with three bridges: Mapper regresses onto reference features, Distillation matches the classifier's class probabilities, and MeanFlow learns a one-step flow from wrist toward reference features. On 40 held-out free-living PAAWS participants, all three bridges improve macro-F1 in every training run, and the strongest, MeanFlow, raises mean macro-F1 from 35.1% to 56.0% with concurrent thigh references (Thigh2Wrist), and from 54.0% to 63.5% with group-matched laboratory wrist references (Lab2Freeliving). Fitted only on PAAWS, MeanFlow also raises macro-F1 on the CAPTURE-24 cohort from 42.8% to 54.7%. The gains replicate on selfBACK, hold across four reference encoders, and grow with temporal context. A study can therefore collect reference recordings for a calibration subset and improve wrist-only recognition for every other participant, training only a bridge of 0.13 to 2.44 million parameters while the reference encoder and classifier stay unchanged.

0.29

Rotation-Invariant Multi-IMU Activity Recognition under Independent Per-Location Orientation Shifts

cs.AI cs.LG ·2026-08-16 ·Seungyeol Baek, Yoonbyung Chai, Yonghyeon Lee, Sungjoon Choi, Sungho Suh
published similarity 0.63
Abstract · 6 pages, 2 figures. ACM International Symposium on Wearable Computing (ISWC) 2026

Human Activity Recognition (HAR) with self-administered wearables, such as at-home rehabilitation and exercise monitoring, often requires reattaching inertial measurement units (IMUs) across sessions. In multi-IMU settings, this can induce independent orientation offsets across body locations, a deployment shift that conventional scalar HAR models do not structurally handle. Existing remedies rely on rotation augmentation, whose robustness depends on sampled transformations, or calibration and orientationnormalization pipelines requiring additional reference-frame assumptions or explicit procedures. We present Truly Rotation-Invariant HAR (TRI-HAR), a rotation-invariant framework that makes robustness to independent per-location IMU orientation offsets a structural model property. TRI-HAR reshapes accelerometer and gyroscope streams into triaxial vectors, applies a shared SO(3)-equivariant backbone and invariant projection to each IMU location, and fuses the resulting invariant features for activity classification. Across four multi-IMU benchmarks, TRI-HAR preserves macro-F1 under fixed independent per-location SO(3) rotations and outperforms rotation-augmented baselines under this target shift without requiring rotational augmentation.

0.58

Wear and Go: Calibration Free Sparse Inertial Motion Capture via Online Sensor Setup Estimation

cs.CV ·2026-11-17 ·Yuanshuo Tan, Licheng Zhong
similarity 0.62
Abstract

Sparse inertial motion capture typically assumes that each sensor's anatomical identity and mounting orientation are known. We present MOSAIC (Motion-based Sensor Assignment and Inertial Calibration), a framework that recovers this setup from ordinary motion without a calibration pose. Our central insight is that body pose changes continuously while the sensor setup persists, allowing movements that are individually ambiguous to provide complementary evidence over time. A setup network processes unordered sensor streams with temporal and cross-sensor attention, then accumulates assignment and rotation evidence into a session-level estimate. The recovered setup canonicalizes measurements for frozen pretrained pose estimators, separating sensor configuration from motion reconstruction. For sensors worn at prescribed body sites, evaluation on real inertial recordings with randomized setups shows near-calibrated pose accuracy for bounded offsets and substantial benefits from accumulation under arbitrary orientations. Transfer across pose networks supports setup recovery as a reusable interface between interchangeable sensors and pretrained pose models.

0.22

When Adaptation Hurts: Split Sensitivity and Person-Level Negative Transfer in Federated Wearable Onboarding

cs.LG cs.DC ·2026-08-18 ·Rahil Aftab, Vineet Kumar Rakesh, Soumya Mazumdar, Tapas Samanta
benchmarktheorycode/data similarity 0.61
Abstract · 14 pages, 2 figures, 4 tables; supplementary material included. Code and supplementary scripts: https://github.com/TitanRahil/When-Adaptatio…

Federated wearable models eventually serve people absent from source training, but favorable average accuracy does not establish that unlabeled onboarding helps each person. We evaluate six core onboarding strategies on five wearable datasets under a leakage-controlled protocol that fixes source checkpoints, estimates normalization from source data only, separates calibration from evaluation recordings, and performs inference over held-out people rather than windows, devices, or random seeds. Completing all eligible HHAR and PAMAP2 outer-person rotations materially changes the conclusion obtained from the original frozen fold. On HHAR, balanced accuracy on that single person is 95.6-97.2% across methods versus 78.3-83.0% over all nine users, a reduction of 13.8-17.8 percentage points (pp). The displayed mean leader changes on both datasets, while paired leader-runner bootstrap intervals include zero and do not resolve a superior method. No adaptive core mechanism combines positive mean gain in all five datasets with zero seed-averaged person-level losses greater than 2 percentage points (pp). FedBN has one such loss and ATP-style adaptation has eight; Feature-only has none after seed averaging, but its exact one-sided 95% upper bound is 7.6%. A complementary seed-person stress audit records 4, 22, and 10 harmful realizations out of 114 for FedBN, ATP-style, and Feature-only, respectively; these are repeated realizations, not independent participants. Tail quality, calibration availability, and fall-window specificity reveal additional failures hidden by mean accuracy. The study therefore provides an auditable development benchmark and failure map rather than a universal-superiority or deployment-safety claim.

0.37

TransfHAR: Self-Supervised Wrist Representations for On-Demand Activity Recognition

cs.LG ·2026-08-16 ·Aidan Bradshaw, Riku Arakawa, Xin Liu, Karan Ahuja
top venue similarity 0.61
Abstract · Accepted to the ACM Symposium on User Interface Software and Technology (UIST '26)

Fine-grained wrist activity recognition can support applications such as procedural step guidance and context-aware assistance, yet acquiring labeled data for every new task, user, and activity granularity remains a bottleneck. We present TransfHAR, a self-supervised wrist IMU framework for on-demand, fine-grained activity recognition by learning transferable motion priors from global, unlabeled activities. We show that self-supervised pretraining on coarse wrist IMU activities (e.g., sitting, walking, exercise) learns motion structure rich enough to transfer to fine-grained manipulative, gestural, and procedural activities (e.g., snapping, stirring, waving) that are absent from pretraining. We implement TransfHAR as a real-time smartwatch application that lets users define and expand their own activity set for personalized recognition from only a few demonstrations. Across three offline cross-dataset evaluations, TransfHAR matches or exceeds fully supervised baselines that use complete label sets with equal or additional sensor channels, by 6.2 balanced-accuracy points on average. In an in-lab study with 10 participants each performing seven novel wrist activities, TransfHAR reaches 86.7% balanced accuracy across participants with five examples per class and 90.4% when updated from a single one-minute recording per class. These results indicate that broad self-supervised wrist pretraining provides an effective foundation for on-demand fine-grained activity recognition.

0.64

IMU-Bench: Benchmarking Wrist IMU Representations Across Kinematic, Semantic and Clinical Tasks

cs.RO cs.AI ·2026-10-14 ·Yiquan Li, Aidan Bradshaw, Chenfeng Gao, Karan Ahuja
benchmarkcode/data similarity 0.60
Abstract

Wrist-worn inertial measurement units (IMUs) provide a common sensing modality for tasks ranging from activity and gesture recognition to pose estimation, inertial odometry and clinical motor assessment. Existing wearable benchmarks evaluate performance across multiple tasks, but leave open how supervision for one task affects transfer to others and whether these tasks benefit from a shared representation. We present IMU-Bench, a benchmark of ten tasks from eight datasets for studying IMU multi-task performance and cross-task transfer. We compare six self-supervised methods pretrained on unlabeled recorded and simulated wrist motion, evaluating classification, pose and velocity estimation, and IMU-language retrieval. We find that our masked autoencoder, InrtlWrist, achieves the best or joint-best frozen-probe performance on nine of ten tasks, and fine-tuning improves on training from scratch on nine of ten tasks, including full-body pose, odometry and retrieval. Across transfer and joint-training experiments, supervision that benefits one target can reduce performance on others, with supervised sources transferring within kinematic estimation while, under frozen probing, none approaches the pretrained encoder on language retrieval, and joint-training gains that come at a cost to the paired task. These findings distinguish broad downstream usefulness from complementary task supervision. Code, task cards and a leaderboard are publicly available.

0.17

When Temporal Perturbations Act Like Sensor Biases: Label-Free Auditing of Wearable Activity Recognizers

cs.LG cs.AIcs.CR ·2026-09-24 ·Qingyu Wu, Yuan Wei, Renju Liu, Hua Cheng
similarity 0.60
Abstract

Wearable human-activity recognition (HAR) models operate across sensors, subjects, and backbones, yet a smooth waveform may appear temporal while exploiting a persistent sensor offset primarily. We introduce SpectrumAudit, a label-sealed audit that fits a phase-randomized full-window stimulus on calibration windows from subjects held out from training and testing. After selection, it replays its exact DC projection and budget-constrained zero-mean residual on the same frozen victim without refitting. Across 27 victims from three datasets and three backbones, the selected waveforms cause 2.87-40.83-point three-phase robust accuracy losses. Under this replay budget, DC is more damaging than AC on 24/27 victims and recovers at least 90% of the full drop on 22/27; all 5 failures occur on WISDM. In a held-out UTD-MHAD check, the selected waveform causes 13.49-pp accuracy and 11.68-pp macro-F1 losses, versus -0.66 pp for matched random changes. The audit diagnoses offset versus zero-mean variation under a common peak-budget cap. The code will be released upon acceptance.

0.34