CS Paper Radar

Human movement reconstruction through latent structural representations during assisted transitions and multidirectional hopping

Guilherme Manna Cesar, Ligia Yumi Mochida, Chady Ghnatios

cs.CE ·submitted 2026-10-07 13:26 UTC · v1

Abstract

The quantification of three-dimensional human kinematics is fundamental to neurorehabilitation and musculoskeletal research, yet atypical posture, physical assistance, and rapid movement create conditions of partial observability. Here, we evaluate a latent-structure-informed framework combining convolutional rank-reduction autoencoding with feedforward regression to reconstruct movement from synchronized video. Three case-based demonstrations span therapist-assisted sit-to-stand in a child with cerebral palsy, unassisted sit-to-stand in a typically developing child, and multidirectional single-leg hopping in a young adult. Reconstruction was examined through positional trajectories, projected angular descriptors, and hip-knee coupling. Across test repetitions excluded from model training, mean absolute errors in a predicted marker position during assisted sit-to-stand ranged from 12.02 to 57.11 mm. Sagittal knee and trunk descriptor errors were 5.32° and 5.38° in the typically developing case. Hip-knee cyclograms captured aspects of coupled-motion patterns in both cases, with closer trajectory correspondence in the typically developing case. Sixteen test hops yielded a vertical knee-marker mean absolute error of 15.58 mm. These findings connect latent-structure-informed reconstruction with biomechanically interpretable movement features, providing a foundation for video-derived assessment spanning clinically atypical movement and high-dynamic athletic movement.

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Model Distillation of a Human-Pose Foundation Model from Unannotated Infant Video for Markerless 3D Pose Estimation

cs.CV ·2026-09-01 ·R. James Cotton, Divya Joshi, Colleen Peyton
published similarity 0.68
Abstract · Accepted to the ECCV 2026 Workshop MoCha

Spontaneous movement is one of the earliest windows onto an infant's neuromotor health, and structured clinical instruments that score it are validated early predictors of cerebral-palsy risk. However, they require specially trained raters, are time-consuming, and carry inter-rater variability. This motivates automated, video-based markerless assessment, especially as marker-based motion capture is impractical in infants. Yet the foundation models that make markerless capture possible are trained almost entirely on adults: our recent multi-view infant study found that no single model is jointly best, with strong 2D keypoint accuracy and direct 3D body recovery split across different models. While that study identifies this trade-off, it does not resolve it. Here, we perform cross-model distillation from the Sapiens 2 pose model into the SAM 3D Body model, using unannotated infant video alone. A frozen teacher supplies dense pseudo-labels, and a differentiable renderer aligns the predicted mesh to them in the training loop. On eleven held-out infants (18 sessions, 173 recordings) under our prior study's multi-view protocol, fine-tuning improves same-view 2D keypoint agreement with the Sapiens reference (median body percentage of correct keypoints @ 10px 0.22 -> 0.42, face 0.22 -> 0.42) and Procrustes-aligned mean per joint 3D position error (25.5 -> 22.2 mm). This demonstrates how cross-model distillation improves SAM 3D Body model performance on infants.

0.38

Autonomous Telerehabilitation via Skeletal Motion Prediction and Joint-Level Performance Assessment

cs.CV cs.LG ·2026-08-12 ·Lara Pereira, João Ruivo Paulo, Pedro Santos, Paulo Peixoto
published similarity 0.65
Abstract · Accepted at IEEE RO-MAN2026

Autonomous rehabilitation systems must not only recognize human motion but also provide structured feedback to support users without continuous therapist supervision. This paper presents a telerehabilitation pipeline that integrates skeleton-based exercise quality assessment and short-term motion prediction into a two-module system operating on marker-free RGB video. A self-attentive Bidirectional LSTM performs exercise quality classification using MMD-NCA metric learning, while a graph-based motion prediction module computes per-joint position errors between predicted and observed poses, generating spatially localized deviation signals. Each module is evaluated independently on established benchmarks: the classifier achieves 96.45% mean-class accuracy on squat sequences from the PROZIS dataset, and the adopted STARS predictor achieves a mean MPJPE of 75.8 mm at 560 ms on Human3.6M, outperforming graph and recurrent baselines across all prediction horizons. The framework is designed for eventual deployment in assistive robotics and home-based rehabilitation contexts; end-to-end integration and clinical validation are important directions for future work. By combining motion recognition and prediction in a single system, this work contributes a step toward autonomous, feedback-driven telerehabilitation, for more accessible and scalable rehabilitation solutions.

0.23

Recovering Biomechanical Signals from Missing Keypoints Using Temporal Interpolation in Monocular Gait Analysis

cs.CV eess.IV ·2026-09-09 ·Shubham Jariwala
similarity 0.62
Abstract · 5 pages, 1 figure

Monocular pose estimation enables low-cost gait analysis but is sensitive to missing keypoints caused by occlusion, detection errors, or efficiency-driven model reduction. While prior work on recovering missing joints focuses on complex learned models, the effectiveness of simple temporal methods remains underexplored. We evaluate knee-angle estimation under a missing-ankle-keypoint condition and test a first-order temporal interpolation scheme as a recovery mechanism. Across 527 frames of monocular walking video (428 with valid baseline detections), removing the ankle keypoint increased mean angular error to 23.4° +/- 46.7° and collapsed signal variance to near zero. Temporal interpolation reduced error to 1.1° +/- 6.7° and restored variance and smoothness to within a few percent of baseline. These results indicate that gait signals possess sufficient temporal redundancy for a simple, computationally trivial interpolation scheme to recover a critical missing joint, without resorting to learned reconstruction models. The findings support low-complexity, real-time-compatible designs for gait analysis in resource-constrained or occlusion-prone monocular settings.

0.30

Video-Based Markerless Motion Capture for Clinical and Rehabilitation Biomechanics: A PRISMA-ScR Scoping Review of Validated Architectures, Clinical Readiness, and Emerging Methods

cs.CV physics.med-ph ·2026-09-16 ·Florian Delaplace, Elodie Piche, Frédéric Chorin, Raphael Zory
similarity 0.61
Abstract

Background.. Video-based markerless motion capture promises movement analysis without the cost, space and skin-marker constraints of optoelectronic systems, with particular potential for clinical and rehabilitation settings. Whether validated pipelines yet deliver clinically acceptable biomechanics, and how they relate to the underlying computer-vision research, remains unclear. Methods. We conducted a scoping review following the PRISMA extension for Scoping Reviews, with a registered protocol and searches of PubMed, Scopus and IEEE Xplore (January 2015 to February 2026; the computer-vision scan was updated to July 2026). A dual-tier design paired a primary corpus of validated biomechanical studies with a complementary, curated and deliberately non-exhaustive corpus of emerging computer-vision work, used qualitatively. We charted study characteristics, pipeline architecture, validation methods and joint-angle accuracy. Results. We included 117 studies, most published from 2024 onward and conducted on healthy adults walking in a laboratory. Pipelines formed five architectural families across monocular and multi-camera modalities; most reported raw joint angles without biomechanical refinement. Sagittal lower-limb agreement clustered around 5 to 6{\textdegree}, generally short of clinical acceptability, while out-of-plane kinematics, kinetics, and pathological or older populations were rarely validated. Emerging computer-vision building blocks (foundation-model mesh recovery, differentiable inverse kinematics, video-based kinetics) were almost absent from validated studies. Conclusions. Video-based markerless capture is not yet interchangeable with marker-based systems for clinical joint kinematics, and it remains barely validated where rehabilitation needs it most: older and pathological populations, out-of-plane kinematics, and kinetics. Mapping this evidence gap onto emerging computer-vision advances, we propose hypothesis-generating design guidelines, not a validated method, to steer the next generation of pipelines toward accessible, clinically meaningful movement analysis.

0.33

Real-Time Musculoskeletal Surrogates for Pediatric Cerebral Palsy: a Credibility Pilot

cs.CV cs.AI ·2026-08-28 ·Mohammad Arif Ul Alam
similarity 0.61
Abstract

Real-time musculoskeletal (MSK) surrogates could support personalized rehabilitation for children with cerebral palsy (CP), but their credibility depends on subject-wise evaluation, low inference latency, and calibrated uncertainty. We develop a subject-conditioned causal neural surrogate using OpenSim-derived static parameters, temporal joint kinematics, true muscle capacities, and training-only perturbations. On a real pediatric CP gait dataset comprising nine children, we use leave-one-subject-out validation on six development subjects and evaluate a frozen configuration once on three locked test subjects. The surrogate accurately reproduces musculotendon lengths (R-square = 0.92 in development validation and approximately 0.95 on locked subjects; nRMSE < 8%) while requiring only sub-millisecond to few-millisecond neural inference, well below a 100 ms interactive-rehabilitation target. In contrast, direct muscle-force estimation remains unstable at this small, heterogeneous scale: pooled metrics can overstate within-subject, per-muscle accuracy. A Monte Carlo credibility pilot further shows that propagating only +/-5% anthropometry and muscle-capacity variation produces severely overconfident nominal 90% intervals (approximately 4% force coverage and below 1% MT-length coverage). These results establish a leakage-free evaluation and credibility framework for pediatric MSK surrogates, while identifying force modeling and epistemic uncertainty as the central next challenges for clinically credible digital twins.

0.24

Markerless Pose Estimation for Resistance Training Technique Assessment

cs.CV cs.AI ·2026-08-25 ·Joseph Turner, Jeff Clark, Nawid Keshtmand
similarity 0.60
Abstract

Resistance training can be a high risk activity, and safe form is essential to avoiding injury. Laboratory-based movement analysis provides quantitive technique assessment, yet is not easily accessible. Markerless pose estimation infers body landmarks from images or video without physical markers and could offer a feasible alternative for technique assessment. We present a pose estimation framework to evaluate resistance-training technique from ordinary video footage. Using BlazePose, anatomical landmarks were extracted from squat, bench press, and deadlift videos and converted into joint-angle trajectories, with the squat serving as the primary case study. Trajectories were assessed against a defined reference repetition using root mean square error (RMSE). Results show that the framework recovers meaningful kinematic patterns for the squat and deadlift, enabling quantitative comparison between repetitions and identification of technique variability within a set. Performance depended strongly on camera orientation and visual occlusion, with non-sagittal views distorting 2D joint-angle estimates. The findings demonstrate that markerless pose estimation can support accessible biomechanical assessment outside laboratory environments.

0.31

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.60
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50

VideoRun2D Demo: Markerless Body Tracking for Biomechanical Analysis of Running

cs.CV ·2026-08-19 ·Luis F. Gomez, Julian Fierrez, Roberto Daza, Ruben Tolosana, Aythami Morales +3 more
similarity 0.60
Abstract · 5 pages, 4 figures, 2 tables. IEEE/CVF Conf. on Computer Vision and Pattern Recognition Workshops (CVPRW), 2026 (1st PhysHuman Workshop: Phy…

Human pose estimation has advanced significantly due to the development of deep learning models, increased data availability, and improved computing resources. These developments have led to highly accurate body tracking systems with direct applications in sports analysis and performance evaluation. The VideoRun2D Demo performs a biomechanical analysis during sprints using different human pose estimators. The proposed framework was evaluated using human pose trackers and expert manual annotations. The tested framework uses 314 sprints from 44 professional runners, focusing on two key joint angles in sprint biomechanics: 1) hip flexion/extension and 2) knee flexion/extension. The framework also includes a post-processing module for outlier detection. The tested results demonstrate that the average root-mean-square errors range from 11.46° to 5.83° for the best trackers. When integrated with the post-processing modules, these errors can be reduced to 9.87° and 5.30°, respectively. The VideoRun2D Demo findings suggest that human pose-tracking approaches can be valuable resources for the biomechanical analysis of running.

0.19