CS Paper Radar

Autonomous thermodynamic cycles via robotic mobility and sensing

Sofia Kuperman, Ezra Ben-Abu, Yaron Veksler, Anna Zigelman, Sefi Givli, Amir D. Gat

cs.CE cond-mat.softcs.ROeess.SYphysics.app-ph ·submitted 2026-10-08 10:39 UTC · v1

Abstract

Thermodynamic cycles are the foundation of energy conversion across natural and engineered systems, transforming heat into useful work. However, these cycles traditionally operate between fixed thermal reservoirs, restricting them to specific locations and temperature differences. Here, we introduce autonomous thermodynamic cycles enabled by robotic mobility and sensing, allowing robots to perform thermodynamic cycles by accessing spatially varying temperature fields. We experimentally realize this concept using multistable gas-filled capsules that circulate within the system across a thermal gradient. Our model reveals that rapid transitions in the capsules' energy states allow the system to operate as a mobile heat engine that harvests and stores energy. By linking the capsule-scale internal energy dynamics to the robot's large-scale navigation strategy, we optimize locomotion paths that balance motion cost and energy harvesting. These findings demonstrate that thermodynamic cycles can emerge when autonomous systems navigate their environments, offering an artificial analog of organisms that forage for energy across spatial resources.

Closest papers

Nearest neighbours by meaning across the whole index.

From Temperature-Limited to Battery-Limited Legged Locomotion

cs.RO cs.LGeess.SY ·2026-11-17 ·Raphaël Ségas, Balázs Opra, Léo Ghafari, Thomas Stewart
hot direction similarity 0.61
Abstract · 9 pages, 7 figures, 2 tables. Supplementary video in the ancillary files. Dataset: https://doi.org/10.5281/zenodo.24274994

On legged robots, sustained locomotion often ends in thermal shutdown rather than battery depletion: the heat of walking concentrates in a few joint motors, which overheat long before the battery is empty. We train thermally aware locomotion policies by reinforcement learning without ever observing temperature, and demonstrate this on a Unitree Go2 quadruped. We first identify a coupled 13-node lumped RC thermal network, fitted on two runs of a single robot and calibrated against the measured electrical power, that predicts all twelve motor temperatures with a mean RMSE below 1 $^\circ$C across different robot instances, gaits, payloads, and speeds. Under a sustained gait, the temperatures the motors will settle at follow directly from the gait-averaged squared torques and joint speeds. Our core contribution is a reward that drives down the hottest predicted asymptotes: thermal time constants exceed the credit-assignment horizon of reinforcement learning by orders of magnitude, but predicted asymptotes respond to torque and joint speed within a single gait cycle, so the policy learns to lower and spread heat with no temperature input. On the robot, the policy turns sustained locomotion from temperature-limited to battery-limited: with a 5 kg payload at 1 m/s, a learned baseline reaches thermal shutdown after 19 minutes (1.1 km), whereas our policy runs the battery down after 174 minutes (10.0 km) with its hottest motor 14 $^\circ$C below the shutdown threshold in a 26 $^\circ$C room; on an unloaded factory circuit with stairs and ramps, the baseline overheats after 25 laps (6.2 km), while our policy completes 47 (11.2 km) on one battery with 22 $^\circ$C of margin.

0.45

Thermo-VLA: A Thermal-Aware Vision-Language-Action Model with Gated Residual Modulation for Robotic Manipulation

cs.RO cs.AI ·2026-11-09 ·Jingxuan Chen, Junshi Luo, Chencheng Dong, Xiaojian Nie, Tongge Huang +1 more
similarity 0.58
Abstract

Recent Vision-Language-Action (VLA) models have begun incorporating thermal sensing, but existing approaches typically treat thermal images as ordinary visual inputs, providing limited support for temperature-aware relational reasoning in manipulation. To address this limitation, we propose Thermo-VLA with a ThermoRes Encoder, which decomposes thermal images into cold and hot attribute representations and injects them into the RGB token through language-conditioned residual modulation, enabling temperature-driven target selection and continuous manipulation. We further construct six real-world robotic tasks on a dual-arm Unitree G1 platform, spanning basic grounding to relational reasoning. Experiments show that Thermo-VLA achieves an average success rate of 0.86 across four thermal-dependent tasks, outperforming a pi_0.5 baseline that directly incorporates RGB-thermal observations by 18 percentage points. Under unseen-object and scene variations, Thermo-VLA maintains an average success rate of 0.78, achieving the best generalisation performance among the compared methods. Beyond thermal sensing, we transfer the same residual modulation mechanism to colour attributes and observe consistent improvements in both simulation and real-robot experiments, indicating its potential to generalise beyond thermal attributes. Project website: https://j-x-chen.github.io/Thermo-VLA-web/

0.14

Emergent Cooperative Thermoregulation in Lunar Swarm Robotics

cs.RO cs.MA ·2026-10-22 ·Anais Jeger, Harry Holt, Lennart Puck
theory similarity 0.56
Abstract · 7 pages, 4 figures. Submitted to IEEE Robotics and Automation Letters. Video in ancillary files

Swarms of small robots are an attractive way to survey lunar caves and lava tubes. Missions such as NASA's CADRE will fly cooperating rovers for distributed mapping, but only in daylight. The 354 h lunar night drops the surface towards 95 K, and the radioisotope heaters that let single rovers survive it cannot be supplied at swarm scale. In this study we investigate whether a swarm can instead use its own members as thermal shielding. We train one policy, shared by all twenty robots, by reinforcement learning with an evolution-strategies estimator. The policy receives a single reward, once, at the end of the night: the mean temperature of the five coldest robots. Nothing in that reward refers to position, spacing, exposure or motion. Two behaviors nonetheless emerge. The swarm aggregates, and robots circulate between the sheltered core and the exposed rim, the same pair of behaviors with which emperor penguins survive the Antarctic winter. We measure the survival threshold, the smallest stored energy per robot at which every robot is still alive at sunrise. Across ten runs it is 155.6 +/- 1.3 pcm-h, where one pcm-h is 7.2 kJ of stored heat. That is 37% below a motionless huddle and within 13% of a physics-based lower bound, and at a budget where the motionless huddle loses six robots, every robot survives. The behavior needs no shared spatial reference and no robot-robot contact, and transfers from twenty robots to forty without retraining.

0.36

SunLightBots: Turning sunlight into self-sustained, high-power motion in soft robots

cs.RO cond-mat.softphysics.app-ph ·2026-11-10 ·Yoo Jin Lee, Melanie Torres Crespo, Zhongxiao Deng, Andrew Tejada-Vega, Rebecca Kramer-Bottiglio +2 more
similarity 0.55
Abstract · 17 pages, 7 figures

Soft robots built from active materials can directly convert environmental stimuli into motion, offering a route to energy autonomy and embodied control. However, environmental energy is generally harvested at low power, whereas rapid, mechanically demanding actions require high mechanical output power. Reconciling this mismatch while sustaining self-regulated cyclic actuation is challenging, particularly at the subgram scale, where limited payload capacity constrains the integration of conventional power and control hardware. Here, we present SunLightBots, a class of subgram, sunlight-powered, untethered soft robots that achieve autonomous locomotion under continuous illumination near 1 Sun (100 mW/cm2). Their operation is enabled by a self-resetting snapping (SRS) mechanism that integrates liquid crystal elastomers (LCEs) with snap-through instability to accumulate solar energy supplied at low power, release it as rapid, high-power motion, and reset through photothermal-mechanical feedback. Through coordinated optimization of the LCE actuation temperature, photothermal conversion, actuation stress, and structural energy barrier, the system operates near 1 Sun and achieves a peak mass-specific mechanical power of 89 W/kg. At this irradiance, the optimized LCE generates an actuation stress of 0.1 MPa at approximately 60 deg C. SunLightBots demonstrate sustained swimming, crawling, and repeated impulsive jumping. Under 1.5 Suns, the swimmer advances more than three body lengths per cycle. This work provides a materials-mechanics route toward autonomous soft robots powered entirely by the environment.

0.35

SHOES: Sim-to-real Hardware-adaptation via On-policy Expansion of Skills for Legged Robots

cs.RO ·2026-10-12 ·Kota Tsuruhara, Tsung-Yuan Chen, Kento Kawaharazuka
published similarity 0.55
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026)

Humans expand their locomotion capability by wearing appropriate footwear, such as hiking boots for mountains or skates for ice. Footwear changes the ground-contact interface and enables traversal of otherwise difficult terrain. In contrast, locomotion controllers are typically trained for a fixed morphology, and their performance can degrade when shoes alter foot geometry, mass, and friction. We propose SHOES, a sample-efficient framework for adapting locomotion policies to footwear-induced morphology changes. SHOES freezes a simulation-trained nominal policy and fine-tunes only lightweight, identity-initialized modulation modules on the robot, preserving the initial behavior while enabling efficient hardware adaptation. We also introduce SafeBox, a workspace-aware waypoint sampler that constrains online adaptation within a user-defined workspace. The simulation results with a shoe-equipped Unitree Go2 show that SHOES substantially recovers locomotion performance after footwear-induced morphology changes using limited additional adaptation. Under the same adaptation budget, SHOES outperforms FiLM-only, Linear Adapter-only, and residual-RL baselines. Real-world experiments on a Unitree Go2 fitted with human shoes further evaluate the effectiveness of SHOES for hardware deployment.

0.21

SkateNav: Learning Energy-Efficient Navigation through Adaptive Skating on Passive-Wheel Quadrupedal Robots

cs.RO ·2026-10-19 ·Jeil Jeong, Taeyun Kim, Sangjin Kim, Jinyoung Choi, Sung-Eui Yoon
code/data similarity 0.54
Abstract · 8 pages, 12 figures, 3 tables. Project page: https://ktw1404.github.io/SkateNav/

Passive-wheel quadrupedal robots offer energy-efficient locomotion through leg-driven propulsion and momentum-driven gliding. However, navigation requires coordinating steering with intermittent propulsion and adapting push-glide timing to task demands. Velocity-tracking objectives may suppress the speed variations inherent in skating, discouraging efficient gliding. To address these challenges, we propose SkateNav, a unified skating-navigation framework based on reinforcement learning. A time-budgeted goal-reaching objective allows the policy to jointly learn steering, propulsion, and their temporal allocation. An adaptive skating cycle structures gliding, pushing, and recovery, while frequency modulation at every control step adjusts phase durations to navigation demands. Simulation experiments demonstrate higher average success rates and lower cost of transport than the evaluated planner-controller baselines, with ablations confirming the contributions of cycle structure and frequency adaptation. Real-world experiments demonstrate zero-shot transfer from simulation to a passive-wheel Mini Cheetah across cluttered indoor spaces, slopes, and paved outdoor surfaces. Supplementary videos are available on the project page: https://ktw1404.github.io/SkateNav/

0.37

PoliMop: Policy-in-the-Loop Motion Planning in 3D Spaces for Mobile Robots

cs.RO ·2026-11-13 ·Yael Fassbind, Valentin N. Hartmann, Huang Su, Yijiang Huang, Stelian Coros
similarity 0.54
Abstract · 8 pages, 5 figures. Videos and code: https://ariael21.github.io/polimop.html

Reaching a goal state in a complex environment often requires a robot to overcome challenging terrain and obstacles. Which routes are accessible depends on the robot's physical design, the control policy it uses, and how it modifies its surroundings. We present a kinodynamic rapidly-exploring random tree (RRT) planner that uses physics simulation to exploit skills encoded in the control policy, which allows it to find a path in the scene with respect to the robot's capabilities. The planner samples states from a reduced state space in 3D around the scene and expands the RRT toward each sample using policy rollouts. We guide sampling with a preplanned path for a simple mass-point model to focus exploration on promising regions leading toward the goal state, reducing planning time by up to 63%. Simulation experiments with quadrupeds, humanoids, and wheeled robots demonstrate that our approach supports drop-in integration of various robots and control policies, exploiting their physical and policy capabilities without modifying the underlying planning algorithm. Predefined environmental modifications, such as placing a plank across a gap to build a bridge, will automatically be picked up by the planner as the robot's reachable space expands.

0.24

Thermal-Headroom Routing for Efficient Robot Perception in Extreme Heat

cs.RO cs.CVcs.PF ·2026-10-26 ·Sparsh Roy, Kevin Zhou, Arhaan Shah, Shreyan Garg, Vihaan Joshi-Apte +2 more
code/data similarity 0.54
Abstract · 9 pages, 5 figures, 11 tables. Code and experimental outputs: https://github.com/ImSpxrsh/thermal-headroom-routing {Submitted IEEE Big Data}

Adaptive robot perception systems must balance detector accuracy, inference latency, and energy consumption, particularly when high ambient temperatures cause processors to thermally throttle. We propose Thermal-Headroom Routing (THR), a lightweight model-selection policy that forecasts processor temperature using a closed-form RC thermal model and excludes detector configurations predicted to cross a throttling threshold. We evaluate THR with four YOLO11 configurations across seven real-world perception traces, eight ambient temperatures, and 20 randomized seeds, comparing it with latency-aware routing, fixed-threshold thermostats, duty caps, and a matched-compute-budget control. At ambient temperatures of 45-55 degrees C and a tight inference deadline, THR eliminates throttling in simulation, reduces deadline misses by 3.9-7.5 percentage points, and reduces energy per on-time frame by approximately 12-13% relative to a latency-belief router. A separate experiment using deadline-paced, nonoverlapping frame execution yields miss-rate reductions of 6.2-9.5 percentage points. A tuned thermostat or duty cap can match THR at a fixed operating point; predictive routing is most useful when ambient conditions or calibrated thermal parameters differ from those used to tune static policies. Measurements on an Apple M5 support the single-node heating approximation but do not validate hardware throttling. The results characterize the conditions under which thermal forecasting improves the efficiency and timeliness of resource-constrained robot perception.

0.46