CS Paper Radar

In-Ride Alcohol-Impairment Detection in E-Scooterists with False-Alarm Control

Marco Capuccini, Rahul Rajendra Pai

cs.LG ·submitted 2026-10-08 12:00 UTC · v1

Abstract

Shared e-scooter services have become a widely adopted urban transport mode. While most users ride responsibly, alcohol intoxication stands out among the factors contributing to severe crashes. Nonetheless, countermeasures remain limited to single-point reaction tests and night bans that suspend the service altogether. This paper proposes a new approach in which onboard sensors evaluate the rider as the trip unfolds, raising an alarm as soon as enough evidence of impairment has accumulated. Specifically, we introduce a detector that operates on inertial and throttle measurements, with a provable bound on the rate of false alarms. Experiments on sensor data from 141 rides, in which 25 participants rode while sober and at two target blood alcohol concentration levels, confirm that the bound holds, whereas baselines and ablations either exceed it or lose detection performance, and in some cases delay the alarm. At a bound of 0.023, the detector identifies 91% of the rides performed at the higher concentration and 50% of those at the lower one, with median detection times of 25 and 27 seconds, respectively. We further show that an embedded implementation meets the real-time requirement, making mitigation actions feasible onboard, without requiring data to leave the vehicle. Overall, this work lays the ground for interventions that reach impaired riders as soon as possible, sparing the sober ones the burden of a pre-ride test or the suspension of the service at night, while letting operators budget false alarms against user experience.

Closest papers

Nearest neighbours by meaning across the whole index.

Kinematic signatures of impairment: Detecting alcohol intoxication in e-scooter riders using sensor data and machine learning

cs.LG eess.SPstat.AP ·2026-09-29 ·Rahul Rajendra Pai, Marco Dozza, Alexander Rasch, Ali Mohammadi, Marco Capuccini
similarity 0.77
Abstract

Alcohol intoxication is a leading contributor to fatal and severe-injured e-scooterist crashes. Current countermeasures, such as temporal restrictions or pre-ride cognitive screening, cannot continuously assess an e-scooterist's physical motor control or impairment in real time. We conducted a controlled experiment in which 25 participants rode an instrumented e-scooter through a test track while sober and at two targeted blood alcohol concentration levels (0.05% and 0.08%). The e-scooter was instrumented with a six-axis inertial measurement unit (IMU), and throttle and brake lever position sensors, all sampled at 100 Hz. Two complementary signal features were computed: normalised permutation entropy, which quantifies temporal complexity, and standard deviation, which quantifies signal amplitude. Repeated measures correlation identified seven kinematic features (all IMU and throttle signals) whose entropy decreased (p < 0.001) while standard deviation increased (p < 0.01) with increasing intoxication, indicating that intoxicated riders shift from continuous, low-amplitude micro-corrections to fewer, high-amplitude reactive corrections. An entropy based multi-class logistic regression classifier, evaluated through leave-one-participant-out cross-validation, achieved 85% overall accuracy and a weighted one-vs-rest area under the receiver operating characteristic curve (AuROC) of 0.94, with a sober-vs-high AuROC of 1.00. Steering rate and lateral acceleration were the most important predictive features, indicating that alcohol induces a distinct collapse in lateral equilibrium during riding. Ultimately, these results demonstrate that onboard kinematic sensing combined with entropy-based signal analysis can reliably distinguish sober from intoxicated e-scooter riding, providing a foundation for automatic intoxication detection systems that preserve mobility for sober riders.

0.40

Tracing Methamphetamine abuse in under-treatment drivers: How biomechanical and oculomotor features help detect at-risk drivers?

cs.HC ·2026-08-13 ·Hamed Salmanzadeh, Alireza Mortezapour, Iman Tahbazzadeh Moghaddam, Farshid Ipackchi, Payam Abedinzadeh +1 more
similarity 0.59
Abstract

While the detrimental impacts of driving under the influence of stimulants such as methamphetamine are well-documented, the driving performance of individuals currently under-treatment has received considerably less attention. This study compared the behavior of individuals with a history of stimulant abuse (across two distinct treatment phases) with a control group of healthy drivers using a driving simulator. Oculomotor and biomechanical data were continuously collected via an eye-tracker and a Kinect sensor, respectively. These parameters were utilized to train a K-Nearest Neighbors (KNN) classification model designed to detect high-risk behavioral patterns in drivers undergoing methamphetamine rehabilitation. Through the evaluation of various feature combinations and neighborhood configurations, the optimized model successfully discriminated between normal drivers and those with a history of abuse with an accuracy of 90%. Detecting at-risk drivers through technologies embedded in Advanced Driver Assistance Systems (ADAS) by continuously monitoring physiological and behavioral parameters, facilitates a proactive safety strategy. Issuing real-time alerts to the driver, passengers, and external monitoring networks can ultimately mitigate the risk of traffic collisions.

0.04

Edge-Assisted Crowdsensing for Explainable Cyclist Safety Perception

cs.CV eess.IV ·2026-11-05 ·Hongsen Cao, Chia-Yen Chiang, Mona Jaber, Meihui Wang, Yasmin Fathy
hot direction similarity 0.55
Abstract

Cyclist fatality rates remain high despite policy support for active travel, and autonomous vehicles add complexity to mixed traffic. Neither crash statistics nor multi-model detection pipelines scale to continuous monitoring of perceived safety along a route. We present an edge-assisted crowdsensing system: handlebar cameras supply street-level frames, a vision-language model (VLM) turns each frame into structured traffic attributes through a single prompt, and an explainable boosting machine (EBM) combines them with OpenStreetMap road infrastructure and on-bike kinematics to predict a crowdsourced 1-9 safety score. Extraction belongs at the network edge: the fastest self-hosted model needs 2.49 s per frame and scoring takes 0.4 ms on a CPU. On 1,362 annotated frames from two London routes, the EBM regressor reaches 72.2 percent binary accuracy and a mean absolute error of 1.011 under five-fold cross-validation. It is within one accuracy point of black-box ensembles. Its per-feature shape functions give exact attribution: physical lane separation is worth +0.97 rating points, a painted lane +0.70 and a construction site -0.65. Planners can therefore price an infrastructure change in rating points, and the results enter cost-benefit analysis directly. We also report inter-annotator agreement (alpha = 0.4695), an attribute audit, and a sensitivity analysis linking attribute error to accuracy. With re-encoding, a 20 s sampling interval serves 1,000 riders at 54 Mbit/s at a cost of 1.4 accuracy points, making continuous monitoring practical.

0.31

Progressive Risk Estimation for Accident Anticipation

cs.CV ·2026-09-26 ·Samet Hicsonmez, Eray Çakar, Nermin Samet, Fatma Güney
top venuecode/data similarity 0.54
Abstract · Accepted to NeurIPS 2026

Accident anticipation aims to recognize anomalous driving cues before a crash while avoiding false alarms during normal driving. Existing approaches typically formulate this task as binary classification, focusing on whether an accident will occur rather than when it will occur. We propose PRE-ACT, a framework that models accident risk as a continuously evolving signal that increases as the crash approaches. By explicitly enforcing temporal ordering and distance-to-accident awareness, our method progressively raises risk while suppressing premature alarms, leading to significant improvements on MM-AU subsets and Nexar. We further introduce a Separation Score to evaluate the global behavior of predicted risk curves beyond local temporal windows. Code and visualizations are available at https://github.com/giddyyupp/PRE-ACT.

0.42

SmartBike: A Low-Power Edge IoT System for Cycling Safety and Real-Time Awareness

eess.SP ·2026-10-08 ·Sogand Hashemi, Gonçalo Sarabanda Neves Loureiro, Catarina Pereira De Freitas Lima, Lyssa Ramaut, Liesbet Van der Perre
published similarity 0.53
Abstract · 5 pages, 4 figures, 4 tables. Presented at the 46th Symposium on Information Theory and Signal Processing in the Benelux (SITB 2026), Ghent,…

Urban cycling is a sustainable mode of transportation, but cyclists remain highly vulnerable in dense traffic because of limited situational awareness and the lack of active safety assistance on conventional bicycles. This paper presents SmartBike, a low power Internet-of-Things (IoT) platform for cyclist safety, combining blind spot monitoring, rider usage detection, localization, and wireless edge-to-gateway communication. The proposed system consists of a bike-mounted IoT node and a gateway assisted monitoring interface. The node integrates three time-of-flight sensors for blind spot detection, an IMU module for motion sensing and on-board speed estimation, a GNSS module for localization, and a saddle mounted piezo-electric transducer for event-driven wake up. To satisfy the energy constraints of the IoT node, the design employs piezo-triggered activation, application specific sensing rates, and compact connectionless Bluetooth Low Energy (BLE) advertisements for low overhead transmission. The firmware is implemented in Zephyr RTOS using a lightweight state machine architecture, while the gateway performs passive BLE scanning, payload decoding, and real-time dashboard visualization. The BLE payload is reduced to 11 bytes, and power analysis shows that sensing accounts for more than 90% of the total energy budget, while wireless communication represents less overall consumption. With a 12600 mWh battery, the estimated lifetime reaches approximately 21 months under typical commuting conditions (Average 40 min per day).

0.40

User Experience in Human-Machine Interaction: Insights from Field Studies in Autonomous Mobility

cs.HC ·2026-08-31 ·Helen Schneider, Svetlana Pavlitska, J. Marius Zöllner
published similarity 0.53
Abstract · Accepted for publication at ABAW Workshop at ECCV2026

Autonomous vehicles (AVs) promise safer, cleaner, and more inclusive mobility, yet large-scale adoption is hindered by user acceptance rather than by technical challenges. Prior studies on acceptance and user experience largely rely on surveys, simulators or Wizard-of-Oz setups, often over-representing technologically enthusiastic participants and focusing on drivers instead of passengers. We address this gap with real-world field studies with AVs in real traffic, totaling 144 participants. Using multi-modal sensing, we evaluated EGG, heartbeat, breathing, camera and voice signals for affect inference in combination with vehicle data. Our results show that breathing, camera and voice measurements are reliable and pratical in naturalistic passenger contexts. We further contribute a validated study protocol, a self-assessment app for real-time assessment during human-machine interaction, and a tailored questionnaire to capture participant attitudes towards AVs. By grounding UX evaluation in real-world contexts, this work lays a foundation for user-centered design of autonomous mobility systems and robotics in general. Our work bridges the gap between affective computing and technical implementation of autonomous vehicles.

0.14

LANTERN: A Closed-Loop Benchmark for VLM-Based Cooperative Driving with Temporally Grounded Warnings

cs.RO ·2026-09-06 ·Yongshuo Liu, Xu Gao, Morui Zhu, Yongqi Zhu, Qi Chen +3 more
benchmark similarity 0.51
Abstract · 19 pages, 11 figures, and 8 tables; includes supplementary material

We present LANTERN, a closed-loop benchmark for temporally grounded cooperative warnings. LANTERN separates warning onset, hazard onset, warning termination, and post-hazard recovery, and evaluates each physical event under matched warning and no-warning executions so that the warning's contribution is measured in isolation rather than confounded with onboard vision. The benchmark spans six safety-critical scenario families and provides 3,272 sequences with 236,309 frames for training, together with 120 matched route pairs for closed-loop evaluation. Each hazard route is evaluated under the warning and no-warning conditions, while its no-hazard control penalizes unconditional braking. We further introduce the Cooperative Unified Score (CUS), a safety-gated metric that jointly rewards route progress, anticipation, clearance, and recovery. Fine-tuning a representative VLM driving model raises CUS from 34.6 without warnings to 75.5 with them, demonstrating both the value of cooperative warnings and the discriminative power of the paired protocol. All resources will be made publicly available.

0.26

Beyond Simulated Benchmarks: Evaluating Motion Representations for Fall Detection Under Real-World Data Scarcity

cs.LG ·2026-08-13 ·Timilehin B. Aderinola, Ilaria D'Ascanio, Luca Palmerini, Lorenzo Chiari, Jochen Klenk +3 more
similarity 0.50
Abstract

Falls are a major health concern for older adults, and wearable sensors have been widely explored for detecting falls and enabling timely intervention. However, real-world falls are extremely rare: collecting 100 of them requires an estimated 100,000 days of monitoring, resulting in severely limited labelled data for training machine learning models. Consequently, many approaches rely on simulated datasets, often reporting high laboratory performance but limited real-world generalisation. We present a systematic evaluation of motion representations for wearable fall detection under real-world data scarcity. Using accelerometer signals, we compare interval-based, kernel-based, symbolic, and foundation model representations. As an interpretable baseline, we additionally investigate a lightweight symbolic representation that converts short motion segments into symbolic sentences augmented with physically-grounded impact descriptors. Experiments use FallAllD, a simulated falls dataset, and FARSEEING, a clinically verified real-world falls dataset. Through cross-validation, controlled data scarcity, and cross-dataset transfer, we examine how representation choices affect robustness under realistic deployment. Our results reveal that highly parameterised kernel and foundation models excel on simulated data but degrade severely under both data scarcity and domain shift. Although the interval-based representation achieves the strongest absolute real-world performance, augmenting a symbolic representation with physically-grounded impact descriptors yields the smallest degradation under domain shift and retains detection sensitivity under extreme scarcity, albeit at lower precision. These findings highlight the importance of evaluating beyond simulated benchmarks and show that representation choice is critical for deployable fall detection given the scarcity of real-world data.

0.04