CS Paper Radar

SmartBike: A Low-Power Edge IoT System for Cycling Safety and Real-Time Awareness

Sogand Hashemi, Gonçalo Sarabanda Neves Loureiro, Catarina Pereira De Freitas Lima, Lyssa Ramaut, Liesbet Van der Perre

eess.SP ·submitted 2026-10-08 12:25 UTC · v1
published

Abstract

Urban cycling is a sustainable mode of transportation, but cyclists remain highly vulnerable in dense traffic because of limited situational awareness and the lack of active safety assistance on conventional bicycles. This paper presents SmartBike, a low power Internet-of-Things (IoT) platform for cyclist safety, combining blind spot monitoring, rider usage detection, localization, and wireless edge-to-gateway communication. The proposed system consists of a bike-mounted IoT node and a gateway assisted monitoring interface. The node integrates three time-of-flight sensors for blind spot detection, an IMU module for motion sensing and on-board speed estimation, a GNSS module for localization, and a saddle mounted piezo-electric transducer for event-driven wake up. To satisfy the energy constraints of the IoT node, the design employs piezo-triggered activation, application specific sensing rates, and compact connectionless Bluetooth Low Energy (BLE) advertisements for low overhead transmission. The firmware is implemented in Zephyr RTOS using a lightweight state machine architecture, while the gateway performs passive BLE scanning, payload decoding, and real-time dashboard visualization. The BLE payload is reduced to 11 bytes, and power analysis shows that sensing accounts for more than 90% of the total energy budget, while wireless communication represents less overall consumption. With a 12600 mWh battery, the estimated lifetime reaches approximately 21 months under typical commuting conditions (Average 40 min per day).

Comment
5 pages, 4 figures, 4 tables. Presented at the 46th Symposium on Information Theory and Signal Processing in the Benelux (SITB 2026), Ghent, Belgium
Journal ref
Proceedings of the 46th Symposium on Information Theory and Signal Processing in the Benelux (SITB 2026), Ghent, Belgium, 19-20 May 2026, ISBN 978-90-834-3164-2

Closest papers

Nearest neighbours by meaning across the whole index.

An Energy Efficient Wearable for Monitoring Elderly People Health

eess.SP cs.CY ·2026-08-26 ·M. Much, A Moraes Filho, J. Sieg, F. Hessel, A. Cataldo Neto +1 more
similarity 0.58
Abstract · 8 pages, 11 figures

The aged population is exposed to risk situations, like falls, sudden changes in vital signs, and faints. These situations become common at this life stage due to a decrease in body capacity and illnesses increase. This scenario imposes attention on families and the national health system. Some studies propose to overcome this problem through elderly health monitoring systems based on smartphones, smartwatches, and other equipment that usually cover low-efficient communication systems and low battery life. This paper proposes an efficient health monitoring system based on Sigfox IoT service and a watch-type wearable device for sensing elderly motion, location, and vital signs to predict risk situations designed to achieve at least 30-days of battery life. Our experimental results show that this architecture is a low-cost, low-power, efficient, and feasible elderly health monitoring solution.

0.36

Edge AI on Constrained Devices for Binary Sleep-Wake Classification in Dynamic Environments

cs.LG ·2026-09-24 ·Stefan Reitmann, Lena Oden
similarity 0.55
Abstract

This paper presents an Edge AI-based system for detecting sleep and wake states in non-stationary mobile environments using resource-constrained embedded hardware. Conventional approaches relying on accelerometer-based activity metrics are highly susceptible to motion and vibration artifacts and are limited by strict compute and energy budgets of wearable and IoT devices. To address these challenges, a multimodal pipeline is designed and implemented on an ESP32-S3 microcontroller. The system combines inertial sensing for head movement analysis and visual pose classification. A dual-core architecture with FreeRTOS enables parallel execution of real-time data acquisition and on-device inference. Sleep detection follows a two-stage strategy: low-movement detection over a temporal window, followed by visual validation of poses. Experimental results show accuracies of 96.5% for motion-based detection and 89% for pose classification, yielding robust binary sleep-wake classification. Field tests confirmed feasibility in representative mobile scenarios. The results demonstrate that privacy-preserving, local sleep detection is achievable on edge hardware through careful co-design, while highlighting limitations in sensing intrusiveness, dataset scale, and system integration.

0.26

Location-Based Safety Management with Wearable Seamless Indoor-Outdoor Positioning

cs.RO ·2026-10-15 ·Anh-Van Vu, Seungwoo Chae, Changmin Sung, Van-Tuan Nguyen, Dongsoo Han
published similarity 0.53
Abstract · 6 pages

Reliable worker localization is essential for real-time industrial safety management, but seamless outdoor-indoor positioning remains challenging. GNSS performs well outdoors yet degrades near buildings and fails indoors, while many indoor systems require costly infrastructure or extensive calibration. This paper presents a practical safety-oriented positioning system that uses resource-constrained wearable tags and a device-cloud split architecture for continuous outdoor-indoor worker tracking. The tag integrates GNSS, IMU, barometric sensing, LTE Cat-M communication, and performs lightweight sensor fusion, while the cloud server executes map-aware fusion for continuous tracking. Developed as an operational platform, the system also includes a database, a map tool, and a dashboard that provide real-time monitoring, geofencing-based access alerts, and safety and productivity analysis. Experiments with multiple participants, each walking an approximately 1400 m outdoor-indoor route, using LTE Cat-M communication, achieve mean errors of 1.32 m indoors and 3.30 m outdoors, while maintaining low positioning latency and efficient power consumption. These results demonstrate the feasibility of wearable-based seamless positioning for scalable real-time safety management.

0.40

In-Ride Alcohol-Impairment Detection in E-Scooterists with False-Alarm Control

cs.LG ·2026-10-08 ·Marco Capuccini, Rahul Rajendra Pai
similarity 0.53
Abstract

Shared e-scooter services have become a widely adopted urban transport mode. While most users ride responsibly, alcohol intoxication stands out among the factors contributing to severe crashes. Nonetheless, countermeasures remain limited to single-point reaction tests and night bans that suspend the service altogether. This paper proposes a new approach in which onboard sensors evaluate the rider as the trip unfolds, raising an alarm as soon as enough evidence of impairment has accumulated. Specifically, we introduce a detector that operates on inertial and throttle measurements, with a provable bound on the rate of false alarms. Experiments on sensor data from 141 rides, in which 25 participants rode while sober and at two target blood alcohol concentration levels, confirm that the bound holds, whereas baselines and ablations either exceed it or lose detection performance, and in some cases delay the alarm. At a bound of 0.023, the detector identifies 91% of the rides performed at the higher concentration and 50% of those at the lower one, with median detection times of 25 and 27 seconds, respectively. We further show that an embedded implementation meets the real-time requirement, making mitigation actions feasible onboard, without requiring data to leave the vehicle. Overall, this work lays the ground for interventions that reach impaired riders as soon as possible, sparing the sober ones the burden of a pre-ride test or the suspension of the service at night, while letting operators budget false alarms against user experience.

0.08

Edge-Assisted Crowdsensing for Explainable Cyclist Safety Perception

cs.CV eess.IV ·2026-11-05 ·Hongsen Cao, Chia-Yen Chiang, Mona Jaber, Meihui Wang, Yasmin Fathy
hot direction similarity 0.53
Abstract

Cyclist fatality rates remain high despite policy support for active travel, and autonomous vehicles add complexity to mixed traffic. Neither crash statistics nor multi-model detection pipelines scale to continuous monitoring of perceived safety along a route. We present an edge-assisted crowdsensing system: handlebar cameras supply street-level frames, a vision-language model (VLM) turns each frame into structured traffic attributes through a single prompt, and an explainable boosting machine (EBM) combines them with OpenStreetMap road infrastructure and on-bike kinematics to predict a crowdsourced 1-9 safety score. Extraction belongs at the network edge: the fastest self-hosted model needs 2.49 s per frame and scoring takes 0.4 ms on a CPU. On 1,362 annotated frames from two London routes, the EBM regressor reaches 72.2 percent binary accuracy and a mean absolute error of 1.011 under five-fold cross-validation. It is within one accuracy point of black-box ensembles. Its per-feature shape functions give exact attribution: physical lane separation is worth +0.97 rating points, a painted lane +0.70 and a construction site -0.65. Planners can therefore price an infrastructure change in rating points, and the results enter cost-benefit analysis directly. We also report inter-annotator agreement (alpha = 0.4695), an attribute audit, and a sensitivity analysis linking attribute error to accuracy. With re-encoding, a 20 s sampling interval serves 1,000 riders at 54 Mbit/s at a cost of 1.4 accuracy points, making continuous monitoring practical.

0.31

An Affordable AI-Integrated Smart Cane for Multimodal Mobility Assistance of Visually Impaired Users

cs.AI cs.CVcs.CYcs.RO ·2026-09-12 ·Ali Akarma, Adeel Ahmad, Toqeer Ali Syed
similarity 0.51
Abstract

Visual impairment affects over 2.2 billion people worldwide, yet conventional white canes cannot detect elevated hazards or provide semantic environmental context. Existing AI-assisted navigation systems typically rely on expensive hardware or cloud connectivity, limiting accessibility in resource-constrained settings. This paper presents an affordable (\$88 USD), fully offline AI-integrated smart cane designed for multimodal mobility assistance on an ultra-low-power Raspberry Pi Zero 2W. The system fuses RGB vision sensing with Time-of-Flight (ToF) distance estimation, pairing an INT8-quantized SSD MobileNet V1 model with distance-aware vibrotactile feedback and real-time audio alerts. To ensure operational robustness on constrained hardware, a multiprocessing architecture isolates sensor acquisition, neural inference, and haptic feedback into independent processes with fail-safe sensing support. Experimental evaluation across indoor mobility scenarios demonstrates a macro-averaged F1-score of 0.82 (precision: 0.85, recall: 0.81), a mean end-to-end latency of 330\,ms, and a peak power draw of 2.8\,W. A preliminary usability study with 12 participants (SUS: 78.5, NASA-TLX) demonstrated positive user perception and enhanced obstacle awareness. The proposed prototype validates the feasibility of deploying privacy-preserving, edge-native assistive intelligence for cost-sensitive mobility assistance.

0.23

From White Canes to Edge AI: A Survey of Assistive Navigation Technologies for Blind and Low-Vision Individuals

cs.HC cs.CV ·2026-10-31 ·Abtin Zandi, Arian Ashrafi, Sarvin Nami, Seyed Sina Negahban, Amirabbas Entezari +6 more
survey similarity 0.50
Abstract

Independent mobility is a foundational requirement for the autonomy of blind and low-vision (BLV) individuals, yet the assistive technologies that support it have historically evolved slowly. This survey systematically reviews 108 peer-reviewed studies published between 2008 and 2026, organizing the field into four technological eras: (i) a foundational era of passive mechanical aids, namely the white cane and the guide dog; (ii) a hardware era of electronic travel aids built on ultrasonic, infrared, and satellite positioning sensors that alert users to proximity but lack semantic understanding; (iii) a deep learning era in which convolutional and transformer-based detectors introduced context-aware scene understanding, initially tethered to cloud infrastructure; and (iv) a contemporary edge-native era defined by model compression, quantization, hardware acceleration, and multi-sensor fusion that relocate intelligence onto resource-constrained wearable and mobile devices. For each era we analyze representative systems, sensing modalities, computational architectures, and reported performance, and we consolidate the field's model-optimization techniques into a single technical reference spanning four detector families and twelve compression strategies. Across the corpus, we find a persistent mismatch between rapid algorithmic progress and slow real-world adoption, driven by cognitive overload in user interfaces, fragmented evaluation protocols, and the scarcity of studies involving BLV participants. We conclude with open challenges, including seamless indoor-outdoor transition, standardized benchmarks, privacy-preserving perception, and the emerging role of multimodal foundation models, and outline a roadmap for socially acceptable, user-centered assistive navigation.

0.23

Real-Time Obstacle Detection and Distance Estimation on Smartphones for Visually Impaired and Distracted Pedestrians

cs.CV cs.AIcs.PFcs.SE ·2026-10-07 ·Abtin Zandi, Sarvin Nami, Roza Ganjipour, Bardia Sabagh Kermani, Amirreza Tarabkhah +1 more
similarity 0.50
Abstract · 10 pages, 3 figures, 4 tables

According to the World Health Organization, at least 2.2 billion people worldwide live with visual impairment, including tens of millions with severe vision loss. Traditional aids such as white canes or guide dogs remain costly, limited in capability, and inaccessible to many. At the same time, smartphone distraction in public spaces has been linked to elevated risks of collisions with vehicles, trips, and falls. These dual challenges motivate lightweight, smartphone-based solutions that combine accessibility with low latency. We present a Kotlin-based Android application that uses a YOLOv8 detector, retrained to recognize eighteen common urban obstacle classes, to deliver real-time obstacle alerts for both user groups. The detector was optimized with pruning, quantization, and early-exit branches, and deployed through the Android Neural Networks API (NNAPI), which can dispatch inference to GPU, NPU, or DSP accelerators when available. On a mid-range smartphone, these optimizations reduced average inference latency from about 3.2 s for the off-the-shelf YOLOv8n to 0.39-0.48 s; the recommended configuration (INT8 quantization with early exit) runs in 0.42-0.48 s while retaining a recall of 0.81. The application combines the optimized detector with ARCore-based or monocular focal-length distance estimation, so it works with a single smartphone camera and requires no LiDAR, depth camera, or other specialized sensor. Multimodal feedback, including Text-to-Speech guidance for visually impaired users and vibration alerts for distracted pedestrians, supports use across different contexts.

0.23