CS Paper Radar

Image-Based Path-Planning for Navigation of Soft-Growing Robots in the Spinal Sub-Arachnoid Space

George Dimas, Panagiotis G. Kalozoumis, Panagiotis Vartholomeos, Dimitris K. Iakovidis

cs.RO eess.SY ·submitted 2026-10-08 18:53 UTC · v1
published

Abstract

Recently, soft robotic procedures are being developed aiming at achieving targeted minimally invasive operations or drug administration in specific locations in the human body. Accordingly, specialized path-planning algorithms need to be investigated for the estimation of efficient paths that would protect the delicate tissue structures and simultaneously satisfy a set of requirements for the efficient navigation of the robot. In this context, we propose an image-based 3D pathplanning algorithm, which is an extension of the A* algorithm, for the navigation of a soft-growing robot inside the spinal subarachnoid space (SSS). The proposed algorithm is capable of estimating a safe pathway towards the goal location, while ensuring the establishment of anchor points that facilitate the efficient steering of the soft robot. The algorithm is evaluated using a highly detailed model of the SSS with respect to its capacity to satisfy the robot movement requirements and path efficiency.

Closest papers

Nearest neighbours by meaning across the whole index.

Anatomy-Aware Dexterity-Driven Design Optimization of Surgical Continuum Robots

cs.RO cs.AI ·2026-09-25 ·Tony Qin, Peter Connor, Khoa Dang, Carter Hatch, Caleb Rucker +2 more
similarity 0.56
Abstract

Performing complex medical procedures with continuum robots requires careful selection of their geometric design parameters. The robot should have high dexterity in the specific anatomical environment of its procedure. This work presents a design optimization method that considers both dexterity and anatomy. We introduce the Reachable Volumetric Dexterous Solid Angle (RVDSA) metric as our objective, which measures the ability of a robot's end effector to reach the points in a goal volume from different directions via collision-free paths from a start configuration. We present a computationally efficient motion planner to compute this objective function for a given robotic design, and we use an asymptotically optimal simulated annealing optimizer to compute an optimized design. We applied our new method to optimize the design of a bimanual dexterous sheaths robot for performing procedures on cancerous polyps in colon anatomies, achieving a 78% higher RVDSA on average than optimizing for 3D voxel coverage alone.

0.31

Observability-Informed Optimal Sensor Placement for Soft Robots

cs.RO ·2026-09-27 ·Samuel Smocot, James Richard Forbes, Audrey Sedal
published similarity 0.54
Abstract · Published in IEEE Robosoft 2026. 8 pages, 4 figures, 6 tables

This paper presents the application and experimental evaluation of a systematic method for optimal sensor placement in soft robots. Existing methods either lack generalizability across different soft robot morphologies or do not account for system dynamics. The applied method uses convex optimization to find the optimal sensor configuration that maximizes an observability Gramian-based metric. The framework is experimentally evaluated using position and strain measurements on a soft continuum arm. Kalman filter state estimates using optimal sensor placements yield lower reconstruction error than a baseline across all sinusoidal input trials, with improvements on the order of millimeters. This case study shows that linear control theory tools can guide optimal sensor placement in soft robots, suggesting an interpretable approach to sensor placement that may extend to other morphologies.

0.59

FlexWorm: Primitive-augmented Hybrid Contact-motion Planning for Suction-based Multi-segment Deformable Robots

cs.RO ·2026-08-17 ·Zili Tang, Tiecheng Guo, Qinyue Zhang, Meng Guo
top venue similarity 0.54
Abstract · 13 pages, 18 figures, accepted for publication in IEEE Robotics and Automation Letters (RA-L), 2026. Supplementary video: https://youtu.be/O…

Multi-segment suction-based soft robots are promising for inspection and maintenance in confined or fragile environments, but existing approaches still depend heavily on manually designed gaits and environment-specific motion scripts. This work presents a planning framework for serial multi-segment soft robots with deformable body segments and boundary suction pads. The formulation targets full 3D navigation on complex surfaces and explicitly handles discrete adhesion switching and continuous body deformation under geometric, collision, and quasi-static feasibility constraints, while remaining agnostic to the specific actuation realization used to produce segment deformation. Its core, block-wise IK hybrid search (IKHS), performs best-first search over feasible adhesion transitions while solving inverse kinematics only on induced free blocks. On top of IKHS, primitive-augmented hybrid search (PaHS) uses a learned observation--primitive embedding to retrieve short validated motion segments for fast local proposal, with fallback to standard IKHS branching when retrieval fails. In simulation, the framework consistently outperforms controlled baselines in planning success, transition quality, and efficiency across diverse terrains. PaHS matches IKHS in success rate while substantially reducing planning time. Repeated hardware experiments on a pneumatic multi-segment soft robot further demonstrate executability and online recovery under actuation and adhesion uncertainty.

0.61

PccDiffuser: Multi-solution Motion Planning for Continuum Robots

cs.RO ·2026-09-09 ·Ke Qiu, Sifan Chen, Si Wang, Rong Xiong, Yue Wang +1 more
hot direction similarity 0.52
Abstract · 8 pages, 8 figures, 1 video

We present the PccDiffuser, a conditional diffusion framework for continuum robots that learns a multimodal distribution over complete configuration-space paths and samples multiple candidate solutions in parallel, which are subsequently converted into an executable trajectory by time allocation considering actuator constraints. Under the piecewise constant-curvature model, we use exponential co-ordinates to describe the robot kinematics, and use graph neural network to encode a variable number of environment obstacles. Analytical differential kinematics is incorporated in the denoising process to improve terminal accuracy and whole-body clearance. On a mixed test set comprising workspace with zero to four obstacles, PccDiffuser achieved a success rate of 91\%. Compared with existing sampling- and optimisation-based benchmarks, it delivered both a higher success rate and greater computational efficiency, with the latter advantage becoming more substantial when sampling more candidate solutions. Experiments on a three-section tendon-driven continuum robot further demonstrate consecutive planning, multi-solution planning, and whole-body obstacle avoidance.

0.35

Autonomous Precision Milling of Biological Structures via Generic Anatomical Priors and Active Boundary Perception

cs.RO eess.SY ·2026-09-11 ·Enduo Zhao, Xiaofeng Lin, Yifan Wang, Yuhan Song, Weihan Li +2 more
similarity 0.51
Abstract · ver 2. 18 pages, 12 figures. Submitted to IEEE Transactions on Automation Science and Engineering (T-ASE) for possible publication

Autonomous precision milling of biological structures is challenged by incomplete knowledge of target geometry, local material thickness, and critical internal boundaries. Subject-specific preoperative models can address geometric and thickness variations, but static models cannot determine boundary status encountered during execution, while repeated target-specific imaging limits scalability. This article presents a state-adaptive autonomous milling framework that assigns complementary roles to generic anatomical priors and active boundary perception. A generic anatomical prior provides conservative global guidance and is transformed through semantic-guided registration and hybrid vision-force calibration into robot-executable guidance for individual targets. As milling approaches uncertain boundaries, the robot actively probes the remaining structure and uses relative stiffness changes to estimate boundary status and structural detachability. A state-adaptive controller governs transitions between active perception and spatially selective incremental refinement, repeating this cycle until the termination criterion is satisfied. Hierarchical experiments on biological surrogates and in vivo mouse cranial window creation demonstrate accurate anatomical prior transfer, reliable boundary adaptation, and autonomous precision milling of biological structures.

0.29

Depth-Aware Path Planning and Collision Avoidance for Robotic Nursing Assistants Using Real-Time 3D Vision

cs.RO ·2026-11-14 ·Peeyush Thakur, Dharmendra Sharma, Archit Sharma, Sandeep Gupta, Anuj Nandanwar +1 more
similarity 0.50
Abstract · 12 pages, 14 figures

This paper presents a depth-aware path planning and collision avoidance framework for the safe navigation of robotic nursing assistants in cluttered environments with low-height obstacles. Conventional LiDAR-based navigation systems, while accurate for mapping and localization, fail to detect transparent or low-height obstacles, whereas vision-based systems are prone to noise and occlusion. The proposed framework integrates RGB-D depth sensing, rule-based obstacle avoidance, and the NavfnROS global path planner to drive the robot from an initial point to a goal point. The proposed approach is implemented on the Husky A200 robot, equipped with a Kinova Gen3 arm, to form a complete setup for a robotic nursing assistant. This system features a multi-layer architecture for global planning, perception fusion, and real-time control in the ROS-Gazebo environment. Experimental evaluations in a simulated cluttered environment demonstrate up to 40\% higher success rate and 35\% improvement in minimum clearance compared with single-sensor baselines. Furthermore, real-world experimental results validate the proposed approach as a computationally efficient and safety-aware navigation solution for autonomous healthcare robots.

0.31

A Horizon-slicing Approach to Minimum Obstacle Displacement Planning for Robot Navigation

cs.RO cs.AI ·2026-09-19 ·Antony Thomas, Giulio Ferro, Fulvio Mastrogiovanni, Michela Robba, Marco Baglietto
publishedhot direction similarity 0.50
Abstract · Accepted for publication in Intelligent Service Robotics

In this paper, we investigate the Minimum Obstacle Displacement Planning problem from a robot motion planning perspective. The problem involves determining a feasible path to a goal location by displacing movable obstacles when no collision-free path initially exists. We show that this problem is computationally challenging and, in particular, NP-hard when obstacles are modeled as polygons in the plane. Besides an exact formulation of the minimum obstacle displacement problem generalizing other problems in the literature, and the associated optimal solution, this paper proposes an approximate solution that is less intensive from a computational standpoint, and differs from the optimal solution by a fraction of the optimal cost, being able to trade-off between path length and amount of obstacle displacements.

0.38

Actuation and Control of Passive Tendon-Driven Soft Extensions Through Rigid Manipulator Motion

cs.RO ·2026-11-11 ·Ignacio Cuiral-Zueco, Gonzalo López-Nicolás, Youcef Mezouar
theorycode/data similarity 0.50
Abstract · 16 pages, 12 figures. Soon to be submitted to the IEEE Transactions on Robotics. Code: https://github.com/nachocz/passive_soft_extension_con…

Industrial manipulators offer reach and precision but can damage nearby structures in confined spaces. Soft robots provide compliant contact but typically have limited reach. Rigid-soft systems combine their advantages, although they often require dedicated actuation and control hardware. We propose actuating a passive tendon-driven soft extension through manipulator joint motion. As the robot moves, the exterior spans of tendons anchored to upstream links change, altering tendon tension and deforming the extension. Inspection through narrow apertures, for example, constrains the motion of the end effector (EE). We develop a controller that regulates the soft tip while preserving such EE constraints. A differential model separates rigid transport from soft deformation, combining analytic arm and tendon kinematics with a locally identified span-to-deformation map. We also derive a local upper bound on the number of independent deformation directions transmitted by the tendons under the EE constraint, and conditions for the exponential convergence of the tip error. A quadratic program with control barrier functions imposes obstacle clearance, fulcrum limits, and model-validity conditions. Simulations and real experiments show tip and shape regulation under free, position-constrained, and fulcrum-constrained EE motion.

0.54