CS Paper Radar

Anatomy-Aware Dexterity-Driven Design Optimization of Surgical Continuum Robots

Tony Qin, Peter Connor, Khoa Dang, Carter Hatch, Caleb Rucker, Robert J. Webster, Ron Alterovitz

cs.RO cs.AI ·submitted 2026-09-25 03:18 UTC · v1

Abstract

Performing complex medical procedures with continuum robots requires careful selection of their geometric design parameters. The robot should have high dexterity in the specific anatomical environment of its procedure. This work presents a design optimization method that considers both dexterity and anatomy. We introduce the Reachable Volumetric Dexterous Solid Angle (RVDSA) metric as our objective, which measures the ability of a robot's end effector to reach the points in a goal volume from different directions via collision-free paths from a start configuration. We present a computationally efficient motion planner to compute this objective function for a given robotic design, and we use an asymptotically optimal simulated annealing optimizer to compute an optimized design. We applied our new method to optimize the design of a bimanual dexterous sheaths robot for performing procedures on cancerous polyps in colon anatomies, achieving a 78% higher RVDSA on average than optimizing for 3D voxel coverage alone.

Closest papers

Nearest neighbours by meaning across the whole index.

Riemannian Optimization-based Whole-body Obstacle Avoidance for Mobile Continuum Robots in Cluttered Environments

cs.RO ·2026-11-04 ·Duo Tang, Ping Deng, Sophie Armanini, Yajing Shen, Toshio Fukuda +2 more
similarity 0.64
Abstract

Inspired by the coordination of global motion and local shape adaptation in snakes, elephant trunks, and octopus arms, we propose a unified planning and control framework for mobile continuum robots in cluttered and confined environments. Existing approaches often address high-level path planning and local motion control separately, limiting coordinated base-arm motion, kinematic consistency, and collision avoidance. Our framework integrates long-horizon trajectory planning with real-time geometric refinement under kinematic and environmental constraints. The global layer combines A* search with minimum-jerk planning to generate smooth reference trajectories. The local layer uses a geometry-consistent inverse kinematics solver and Riemannian optimization to coordinate mobile-base motion and continuum deformation while avoiding obstacles. We evaluate the framework through simulated pipe-traversal tasks with multiple baseline planners and real-world experiments involving navigation among dense obstacles and manipulation in confined spaces. Results demonstrate improved motion consistency, feasibility, and adaptability, supporting coordinated whole-body motion of mobile continuum robots in constrained environments.

0.27

PccDiffuser: Multi-solution Motion Planning for Continuum Robots

cs.RO ·2026-09-09 ·Ke Qiu, Sifan Chen, Si Wang, Rong Xiong, Yue Wang +1 more
hot direction similarity 0.62
Abstract · 8 pages, 8 figures, 1 video

We present the PccDiffuser, a conditional diffusion framework for continuum robots that learns a multimodal distribution over complete configuration-space paths and samples multiple candidate solutions in parallel, which are subsequently converted into an executable trajectory by time allocation considering actuator constraints. Under the piecewise constant-curvature model, we use exponential co-ordinates to describe the robot kinematics, and use graph neural network to encode a variable number of environment obstacles. Analytical differential kinematics is incorporated in the denoising process to improve terminal accuracy and whole-body clearance. On a mixed test set comprising workspace with zero to four obstacles, PccDiffuser achieved a success rate of 91\%. Compared with existing sampling- and optimisation-based benchmarks, it delivered both a higher success rate and greater computational efficiency, with the latter advantage becoming more substantial when sampling more candidate solutions. Experiments on a three-section tendon-driven continuum robot further demonstrate consecutive planning, multi-solution planning, and whole-body obstacle avoidance.

0.35

Contact-Stable Deformable Tissue Simulation Using Implicit Integration and Live-Pose Grasp Constraints for Laparoscopic Surgery Robot Policy Evaluation

cs.RO ·2026-09-22 ·Juahn Oh, Dongho Yee, Jinseok Lee, Jiyul Lee, Yechan Seo +7 more
hot direction similarity 0.61
Abstract · Submitted to IEEE ICRA 2027

Closed-loop evaluation of surgical robots requires tissue that deforms, can be grasped and lifted, and reproduces the anatomy in which the robot will operate. We present a simulator in which this tissue is reconstructed from a fixed-view RGB-D recording of the surgical field, composited to remove the instruments, closed into watertight volumes and tetrahedralised; the pipeline was applied unchanged to three specimens of two species (thirteen organs, 146,061 tetrahedra, no inverted elements). For one specimen, the organs are placed in a bimanual cell in which two Franka FR3 arms operate motorised instruments through 6 mm trocars. The core contribution is the numerical and contact design that keeps this cell stable: implicit integration, simulation meshes separate from collision meshes, numerical guards, and a grasp constraint captured at the live tissue pose. In 45 repeated grasp-lifts, a friction grasp held the tissue in 0 of 15 trials and each constraint grasp in 13 of 15; on displaced tissue, a rest-pose constraint produced one-step snaps of up to 17.8 mm, which live-pose capture eliminates. Against the recording, front-surface depth error is 1.33 to 1.41 mm, organ silhouette IoU is 0.80, and in five grasp-lifts reproduced from video the landmark displacement RMSE is 11.8 mm against 14.2 mm for a static prediction. Biofidelity is not claimed; the environment is intended for closed-loop feasibility, safety, contact and policy screening.

0.32

Real-Time Whole-Body Safe Motion Generation for Multi-Segment Tendon-Driven Continuum Robots

cs.RO ·2026-09-22 ·Fangju Yang, Siyi Ma, Tonghao Guan, Tingcong Liu, Hang Yang +3 more
hot direction similarity 0.61
Abstract

Real-time motion generation for tendon-driven continuum robots requires accurate modeling of nonuniform bending and whole-body collision avoidance. This paper presents a unified actuation-space framework for planar multi-segment tendon-driven continuum robots. An energy-based variable-curvature model captures spatially varying tendon spacing and bending stiffness and provides analytical Jacobians for differential inverse kinematics and safety monitoring. A multipoint CBF-QP enforces backbone clearance under obstacle motion and actuation-velocity bounds, while its decision dimension depends only on the number of independently actuated segments. The model closely agrees with GVS references, with a maximum curvature error of $5.223 \times 10^{-2}\,\mathrm{m}^{-1}$. Over 100 MuJoCo trials, the proposed method achieves collision-free success rates of 96% and 100% in static and dynamic scenarios, respectively, compared with approximately 60% and 80% without CBF constraints. Hole-traversal tests further demonstrate safe motion in constrained environments. With 600 backbone monitoring points, the mean control-step time is 6.66 ms, demonstrating real-time whole-body safe motion generation.

0.29

Design and Characterization of a Unified Continuum Robot Actuation Platform

cs.RO ·2026-10-14 ·Yunti Xu, Aedan Mangan, Miheer Potdar, Alex Lu, Tania K. Morimoto
similarity 0.60
Abstract

Continuum robots enable dexterous access to confined spaces in applications such as minimally invasive surgery and industrial inspection. However, their actuation systems are often custom-designed for specific robot architectures and tasks, limiting reuse across publications, institutions, and applications. This paper presents a unified actuation platform that decouples actuation hardware and software from continuum robot design. The platform provides modular actuation across continuum robot classes, scales to a large number of degrees of freedom (DOFs), and integrates with conventional serial manipulators for hybrid architectures. We validate the platform on an open-sourced surgical robotic system and experimentally characterize the actuation modules, achieving sub-millimeter translational accuracy and less than $5^\circ$ rotational error over ranges of $30$~mm and $180^\circ$, respectively. We further demonstrate the platform in two surgical use cases: teleoperation of a continuum camera in a constrained environment and bimanual manipulation using $2.53$~mm concentric-tube-robot-based forceps alongside a conventional wristed instrument. All hardware designs and ROS-based software are open-sourced to facilitate reuse and further research in continuum and surgical robotics.

0.31

Capstan-driven Continuum Surgical Robot: Design, Modeling, and Perception

cs.RO ·2026-08-13 ·Gang Zhang, Yufu Qiu, Junyan Yan, Wenhui Zeng, Wenlong Lu +1 more
similarity 0.60
Abstract

Shape and force sensing have long been critical bottlenecks in the development of compact capstan-driven continuum surgical robots, primarily due to the difficulty of obtaining cable tension information within the confined capstan assembly. To overcome these challenges, this paper presents an integrated design-modeling-sensing approach based on the concept of actuation-perception co-design. A compliant element is introduced into the motor mounting bracket of the drive system, enabling micro-deformation under the cable reaction force and thereby allowing real-time cable tension measurement without occupying the compact capstan space. To address the modeling complexity arising from unconventional joint configurations introduced by the spatial cable routing strategy, a parallel computation framework based on a multibody short-thick-beam model is proposed, which captures shear effects in short beam segments and synergistic multi-cable interactions while achieving real-time performance. Building on this framework, stable shape and force sensing is achieved by incorporating a proximal multi-axis force/torque sensor as an additional measurement anchor. Following this design-modeling-sensing framework, capstan-driven continuum surgical robots with single- and dual-segment configurations are developed. Experimental results validate the proposed framework in both single- and dual-segment continuum robots, demonstrating real-time tip pose estimation together with contact force and location perception. By enabling cable tension feedback without compromising the compact capstan architecture, the proposed framework makes integrated perception feasible for capstan-driven continuum surgical robots.

0.04

Humanoids for Robot-Assisted Surgery: Bimanual Base Placement and Tool-Mount Optimization via Capability Maps

cs.RO ·2026-09-27 ·Peihan Zhang, Zekai Liang, Florian Richter, Nikita Thareja, Ryan Broderick +2 more
similarity 0.60
Abstract

Rapid advances in humanoid robotics have motivated growing interest in the application of humanoids for healthcare and clinical tasks. However, it remains unclear how close contemporary humanoids are to meeting the kinematic demands of robot-assisted laparoscopic surgery. In this work, we address the question of optimal robot positioning through a quantitative analysis of workspace and robot setup configurations. We present a capability-map-based robot setup framework that optimizes humanoid base placement and tool mounting orientation to maximize bimanual humanoid reachability while accounting for tool-tip kinematics and remote-center-of-motion (RCM) constraints. We evaluate three humanoid platforms spanning different body dimensions and kinematic redundancy on workspace reachability for three representative general surgery procedures: cholecystectomy, inguinal hernia repair, and sleeve gastrectomy. The proposed joint optimization of base placement and tool mounting consistently outperforms base-only optimization and heuristic baselines. For cholecystectomy and inguinal hernia repair, which are characterized by relatively small and minimally overlapping workspaces, humanoid reachability approached 90%. For the larger, overlapping multi-port arm workspace of sleeve gastrectomy, humanoids yield substantially lower coverage. These results quantify the near-term promise of humanoids for selected laparoscopic procedures and clarify key limitations that must be addressed for broader deployment.

0.36

From Biological Curves to Soft Modular Robots: Learning-Based Inverse Design with Uncertainty-Guided Refinement

cs.RO cs.LG ·2026-10-27 ·Dixiang Wang, Minghao Zha, Arifur Rahman, Yinhong Qin, Yitao Jiang +4 more
similarity 0.59
Abstract · 8 pages, 8 figures, 2 tables

Animals exhibit diverse shape-changing behaviors, from the undulatory swimming of eels to the arching movements of inchworms. Reproducing these biological shapes with modular soft robots offers a promising approach to developing versatile bioinspired robotic systems. However, translating a desired shape into a feasible robotic configuration remains challenging. Existing cable-driven modular soft robots rely on computationally expensive physics-based modeling and combinatorial search for inverse design, making it difficult to efficiently reproduce diverse target shapes. To address this challenge, we present a learning-based real-to-sim-to-real framework that translates biological curves into robotic configurations through surrogate-assisted inverse design and uncertainty-guided refinement. The proposed method combines learned inverse prediction with targeted candidate exploration, using a fast forward surrogate to evaluate and select suitable designs. The learned forward surrogate reduces deformation prediction time from $1.53 \times 10^5$ ms to 0.0008 ms, achieving approximately a $1.9 \times 10^8$-fold speedup. At the same time, the proposed inverse design method reduces design time from $1.99 \times 10^6$ ms to 4.18 ms. On 5,000 test samples generated from previously unseen threading patterns, the method achieves a 93% shape reconstruction success rate under surrogate-based evaluation. Physical demonstrations with four bioinspired robots further illustrate the translation of biological curves into realizable robotic shapes.

0.34