CS Paper Radar

Humanoids for Robot-Assisted Surgery: Bimanual Base Placement and Tool-Mount Optimization via Capability Maps

Peihan Zhang, Zekai Liang, Florian Richter, Nikita Thareja, Ryan Broderick, Shanglei Liu, Michael Yip

cs.RO ·submitted 2026-09-27 02:07 UTC · v1

Abstract

Rapid advances in humanoid robotics have motivated growing interest in the application of humanoids for healthcare and clinical tasks. However, it remains unclear how close contemporary humanoids are to meeting the kinematic demands of robot-assisted laparoscopic surgery. In this work, we address the question of optimal robot positioning through a quantitative analysis of workspace and robot setup configurations. We present a capability-map-based robot setup framework that optimizes humanoid base placement and tool mounting orientation to maximize bimanual humanoid reachability while accounting for tool-tip kinematics and remote-center-of-motion (RCM) constraints. We evaluate three humanoid platforms spanning different body dimensions and kinematic redundancy on workspace reachability for three representative general surgery procedures: cholecystectomy, inguinal hernia repair, and sleeve gastrectomy. The proposed joint optimization of base placement and tool mounting consistently outperforms base-only optimization and heuristic baselines. For cholecystectomy and inguinal hernia repair, which are characterized by relatively small and minimally overlapping workspaces, humanoid reachability approached 90%. For the larger, overlapping multi-port arm workspace of sleeve gastrectomy, humanoids yield substantially lower coverage. These results quantify the near-term promise of humanoids for selected laparoscopic procedures and clarify key limitations that must be addressed for broader deployment.

Closest papers

Nearest neighbours by meaning across the whole index.

RoboAssist: Interactive Human-Humanoid Planning for Long-Horizon Surgical Assistance

cs.RO ·2026-09-30 ·Jingwei Jia, Keyu Zhou, Jiewei Wang, Peisen Xu, Xingyuan Zhou +5 more
similarity 0.62
Abstract · Project Web: https://roboassist.github.io

Long-horizon surgical assistance requires humanoid robots to coordinate with evolving human activities while maintaining safety across planning and execution. We present RoboAssist, an agent-based framework for interactive human-humanoid planning that integrates workflow reasoning, task coordination, and cross-layer safety. At its core is an asymmetric dual-track representation that separates partially observed human process states from executable robot task sequences. By updating human-process estimates, scene context, and task dependencies online, RoboAssist revalidates the remaining task sequence and replans only the affected suffix when workflow requests change. A cross-layer safety architecture combines preventive navigation regulation, reactive regulation during close-range handover, and independent whole-body runtime supervision. This design couples online task coordination with safety constraints throughout execution. We demonstrate the framework on a Unitree G1 humanoid robot in long-horizon, multi-stage simulated surgical assistance scenarios encompassing multimodal interaction, instrument handling, medical material transport, navigation, and safe human-robot handover. Experiments show multi-stage task completion and adaptation to workflow-request changes. A targeted full-replanning ablation shows that residual replanning reduces plan-update latency and post-update token usage. Separate safety experiments demonstrate complementary protection across navigation, handover, and runtime supervision. Additional results and demonstrations are available online at https://roboassist.github.io.

0.30

DASH: A da Vinci Adapter for Serial-link and Humanoid Robots as an Accessible Platform for Surgical Robotics Research

cs.RO ·2026-10-05 ·Sara Wickenhiser, Junrong Zhou, Zekai Liang, Lizzie Peiros, Liu Shanglei +1 more
similarity 0.61
Abstract · 8 pages, 9 figures

Robotic minimally invasive surgery offers well-documented clinical benefits, but the cost and infrastructure requirements of purpose-built platforms limit access in rural and lower-resourced facilities. Recent work has teleoperated general-purpose robots for laparoscopic tasks and in vivo procedures, but relied on handheld instruments coupled through passive linkages rather than native robotic actuation. Instead, we adapt da Vinci Classic and Xi instruments onto general-purpose robots that can integrate in clinical workflows. We present DASH, a da Vinci Adapter for Serial-link and Humanoid platforms, consisting of two types of adapters that require no modification to the instruments themselves. Each adapter is compatible with many robotic platform load capacities, engages the instrument's native latch, and wirelessly identifies inserted tools to load instrument-specific kinematics and coupling matrices. Teleoperated experiments demonstrate the efficacy of DASH and its benefits for enabling research access to surgical robotic platforms.

0.45

ARTS: An Open-Source, Reproducible Three-Arm Platform for Autonomy Research in Minimally Invasive Surgery

cs.RO ·2026-11-11 ·Jiawei Ge, Chunwoo Kim, Antony Goldenberg, Douglas McDonough, Justin Liao +16 more
code/data similarity 0.60
Abstract · Submitted to the 2027 International Symposium on Medical Robotics (ISMR). † Equal contribution

Research on surgical autonomy needs open platforms that any laboratory can build, yet the most widely shared platform depends on donated clinical hardware, and open alternatives on industrial arms each lack part of the surgical chain. We present the Autonomous Robotic Translational System (ARTS), an open-source three-arm platform for autonomy research in minimally invasive surgery, built entirely from purchasable parts for about USD 137,000. Two UR5e arms hold wristed da Vinci X/Xi instruments, a UR5 arm holds a stereo endoscope with two FLIR cameras, the surgeon console provides haptic handles, footswitches and a stereo viewer, and a hardware stop independent of the software lets a supervisor freeze all three arms in place. The ROS 2 software pins every dependency, installs from the same scripts on bare metal or in containers, and records stereo images with hardware-measured timing. On the real arms, ARTS commands each arm at its controller's full rate (e.g., 500 Hz on the UR5e), the two cameras expose within 12 microseconds of each other, hand motion reaches the arm in 58 ms, and the endoscope image reaches the monitor in 68 ms. The ISO 9283 pose repeatability is 0.14-0.25 mm, comparable to a da Vinci Research Kit (dVRK) Classic arm on the same protocol, and an optical tracker measured a mean remote-center-of-motion error of 0.34-0.37 mm. Three expert and three novice operators performed the Fundamentals of Laparoscopic Surgery (FLS) peg transfer through a laparoscopic trainer box, and one of the experts sutured on a suture pad. The hardware designs, firmware and software are available at https://github.com/MRE-Lab-UMD/arts.

0.56

Anatomy-Aware Dexterity-Driven Design Optimization of Surgical Continuum Robots

cs.RO cs.AI ·2026-09-25 ·Tony Qin, Peter Connor, Khoa Dang, Carter Hatch, Caleb Rucker +2 more
similarity 0.60
Abstract

Performing complex medical procedures with continuum robots requires careful selection of their geometric design parameters. The robot should have high dexterity in the specific anatomical environment of its procedure. This work presents a design optimization method that considers both dexterity and anatomy. We introduce the Reachable Volumetric Dexterous Solid Angle (RVDSA) metric as our objective, which measures the ability of a robot's end effector to reach the points in a goal volume from different directions via collision-free paths from a start configuration. We present a computationally efficient motion planner to compute this objective function for a given robotic design, and we use an asymptotically optimal simulated annealing optimizer to compute an optimized design. We applied our new method to optimize the design of a bimanual dexterous sheaths robot for performing procedures on cancerous polyps in colon anatomies, achieving a 78% higher RVDSA on average than optimizing for 3D voxel coverage alone.

0.31

Compressed Orientation Reachability Maps for Sub-Second Robotic Needle Entry Point Planning

cs.RO cs.CGeess.SY ·2026-10-29 ·Prabhu Nithin Gollapudi, Andreas Maier, Franziska Mathis-Ullrich, Water Zhao, Jia Wang +1 more
similarity 0.59
Abstract · 6 pages, 4 figures, 2 tables

In the context of multi-stage trajectory planning for robotic percutaneous liver interventions, identifying a kinematically feasible entry point remains a critical computational bottleneck. Existing methods rely on exhaustive inverse kinematics or randomized searches, incurring delays of 13 to 27 seconds per target and limiting real-time intraoperative adaptation. This paper introduces an Orientation-Based Reachability Map (ORM) that precomputes the kinematic feasibility of a 6 Degrees of Freedom (DoF) serial manipulator across 188,873 workspace positions and encodes orientation feasibility into a compact, indexed 83 MB map. A Just-In-Time (JIT) compiled runtime pipeline replaces live optimization with near-instantaneous array lookups. Experimental evaluation demonstrates a reduction in planning latency from 13.5-26.9 s to 0.289-0.349 s per target while maintaining high geometric fidelity, achieving a mean convex hull volume overlap ratio of 0.933 and a mean alpha-shape volume ratio of 0.976 relative to the baseline reachable point cloud. The proposed ORM framework enables sub-second entry point planning and provides an efficient computational framework for robotic needle insertion in percutaneous liver ablation.

0.37

Surgical Master Console Using General-Purpose Robot Arms and a Separable Articulated Distal Interface: Porcine In-Vivo Evaluation

cs.RO ·2026-09-27 ·Minsung Kim, Seonho Shim, Dongho Yee, Younghoon Noh, Juahn Oh +7 more
similarity 0.59
Abstract · Submitted to IEEE ICRA 2027

High-performance surgical master consoles offer intuitive articulated manipulation but are expensive and difficult to reproduce, while accessible commercial haptic devices lack built-in interfaces for surgical wrist articulation and continuous grasp. We present a laparoscopic master in which general-purpose robot manipulators provide the programmable base and surgical-specific interaction is concentrated in a separable distal adapter. Each 6-DoF arm carries a custom 2-DoF direct-drive wrist, continuous grasp sensing, and clutch-based workspace management; the complete bimanual hardware costs approximately US$5,500, below common bimanual commercial haptic references. To support sustained hand-guided use, we characterize current scaling, gravity, and break-away friction and use them for posture-dependent gravity compensation and motion-gated assistance, reducing continuous actuation and thermal loading. A common master state drives either Isaac Sim or an RCM-constrained dual-FR3 platform. Master-state publication to FR3 target update adds at most 8 ms, and tip tracking shows 0.31-0.66 mm mean delay-aligned residuals. In a porcine cholecystectomy experiment, five common operator-side metrics and hand/tip-speed distributions were compared descriptively with human in-vivo telemetry from 120 clinical Versius recordings of 99 cholecystectomy procedures; no interruption originated from the master console, and no abnormal clinical signs were recorded during the 7-day postoperative observation period. These results demonstrate a surgical master built from general-purpose robot arms with surgical-specific interaction concentrated in a separable distal interface.

0.32

Active Constraints for Simultaneous Guidance and Safety in Handheld Micromanipulation

cs.RO ·2026-10-27 ·Roger Ho, Robert A. MacLachlan, Cameron N. Riviere
similarity 0.58
Abstract · 8 pages, 3 figures, submitted to ICRA 2027

In micromanipulation, erroneous hand motion limits unaided manipulation accuracy, which can affect task performance and safety in critical applications like microsurgery. Handheld robots (micromanipulators) enable motion accuracy beyond human limits by providing robotic assistance in a low-cost, compact, intuitive form factor. Particularly, active constraints are an effective form of robotic assistance, which aids the operator by restricting the robot's permissible motion based on task-specific requirements or objectives, thereby providing task guidance and enforcing safety. However, existing formulations of active constraints for handheld systems are limited, most notably because of the inability to provide guidance and enforce safety simultaneously. Implementing active constraints with optimization-based methods can address these limitations, but existing implementations are designed for free-standing robots, and neglect that handheld robots actuate relative to the operator's hand with a limited workspace. In this work, we propose an optimization-based active constraint framework for handheld micromanipulation that enables simultaneous guidance and safety enforcement. The formulation was implemented in a handheld robot and demonstrated on a medically relevant artificial task. Results show that the proposed formulation reduced safety violation rate by more than two orders of magnitude relative to baselines, while recovering the threefold accuracy loss from enforcing safety alone.

0.38

Design and Characterization of a Unified Continuum Robot Actuation Platform

cs.RO ·2026-10-14 ·Yunti Xu, Aedan Mangan, Miheer Potdar, Alex Lu, Tania K. Morimoto
similarity 0.58
Abstract

Continuum robots enable dexterous access to confined spaces in applications such as minimally invasive surgery and industrial inspection. However, their actuation systems are often custom-designed for specific robot architectures and tasks, limiting reuse across publications, institutions, and applications. This paper presents a unified actuation platform that decouples actuation hardware and software from continuum robot design. The platform provides modular actuation across continuum robot classes, scales to a large number of degrees of freedom (DOFs), and integrates with conventional serial manipulators for hybrid architectures. We validate the platform on an open-sourced surgical robotic system and experimentally characterize the actuation modules, achieving sub-millimeter translational accuracy and less than $5^\circ$ rotational error over ranges of $30$~mm and $180^\circ$, respectively. We further demonstrate the platform in two surgical use cases: teleoperation of a continuum camera in a constrained environment and bimanual manipulation using $2.53$~mm concentric-tube-robot-based forceps alongside a conventional wristed instrument. All hardware designs and ROS-based software are open-sourced to facilitate reuse and further research in continuum and surgical robotics.

0.31