CS Paper Radar

Active Constraints for Simultaneous Guidance and Safety in Handheld Micromanipulation

Roger Ho, Robert A. MacLachlan, Cameron N. Riviere

cs.RO ·submitted 2026-10-27 21:26 UTC · v1

Abstract

In micromanipulation, erroneous hand motion limits unaided manipulation accuracy, which can affect task performance and safety in critical applications like microsurgery. Handheld robots (micromanipulators) enable motion accuracy beyond human limits by providing robotic assistance in a low-cost, compact, intuitive form factor. Particularly, active constraints are an effective form of robotic assistance, which aids the operator by restricting the robot's permissible motion based on task-specific requirements or objectives, thereby providing task guidance and enforcing safety. However, existing formulations of active constraints for handheld systems are limited, most notably because of the inability to provide guidance and enforce safety simultaneously. Implementing active constraints with optimization-based methods can address these limitations, but existing implementations are designed for free-standing robots, and neglect that handheld robots actuate relative to the operator's hand with a limited workspace. In this work, we propose an optimization-based active constraint framework for handheld micromanipulation that enables simultaneous guidance and safety enforcement. The formulation was implemented in a handheld robot and demonstrated on a medically relevant artificial task. Results show that the proposed formulation reduced safety violation rate by more than two orders of magnitude relative to baselines, while recovering the threefold accuracy loss from enforcing safety alone.

Comment
8 pages, 3 figures, submitted to ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Simultaneous Force and Motion Control in Generalised Coordinates

cs.RO ·2026-10-16 ·Jon Woolfrey
similarity 0.64
Abstract · 8 pages, 5 figures, submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Robot manipulators often come into contact with rigid objects when performing work. This imposes physical constraints on their motion. Simultaneous force & motion control was developed to regulate contact forces commensurate with these constraints, whilst projecting motion control in to the orthogonal, unconstrained directions. This is typically formulated in the task coordinates, i.e. operational space, then mapped to joint torques to command the robot. However, most constraints on the robot control, such as joint limits, collision avoidance, singularity avoidance, etc. are naturally expressed in generalised coordinates (joint space). Thus, formulating the control problem in task space makes it difficult to guarantee control feasibility. In this paper Gauss' principle of least constraint is used to solve the control as a quadratic programming (QP) problem in generalised coordinates. It is shown that the theoretical solution to this problem produces the correct constrained dynamics for accurate contact force control. Moreover, inequality constraints may be appended to ensure feasibility and safety. Simulation results were conducted in MuJoCo and compared to the operational space formulation. The proposed method is able to simultaneously maintain a desired contact force, minimise trajectory tracking error, and adhere to practical inequality constraints.

0.19

WBAG: A Whole-Body and Attached-Geometry Safety Framework for Vision-Language-Action Manipulation

cs.RO ·2026-10-01 ·Samuel Zhen, Siwon Jo, Yanze Zhang, Wenhao Luo
benchmarkcode/data similarity 0.64
Abstract · Project page: https://samuelzhen.com/projects/wbag

Vision-language-action (VLA) policies have demonstrated impressive capabilities in generalizable robotic manipulation, but their deployment in the real world remains challenging due to potential collisions involving different parts of the robot, manipulated objects, and the surrounding environment. Existing inference-time VLA safety frameworks typically rely on simplified end-effector-centered representations that do not explicitly model the full articulated robot and attached-object geometry. In this paper, we present WBAG, a safety framework that models the robot's whole-body and grasp-dependent attached geometry. WBAG constructs a grasp-conditioned safe set that adapts the protected geometry as objects are grasped, then converts this evolving geometry into differentiable CBF constraints that minimally modify the VLA's six-dimensional operational-space action for collision avoidance across robot, scene, and attached geometry. On the SafeLIBERO benchmark, a variant of LIBERO augmented with obstacles for safety evaluation, WBAG achieves the best overall safety and safe task success among the evaluated methods under a scene-level safety evaluator that monitors all eligible non-task objects, reaching 97.38% aggregate Scene Safety and 59.38% Safe Success. Project page: https://samuelzhen.com/projects/wbag

0.25

MANIGUARD: A Benchmark and Data Suite for Specification-Grounded Safety Evaluation and Improvement of Robotic Manipulation

cs.RO ·2026-08-18 ·Yiyan Peng, Philip Wang, Simon Sinong Zhan, Yiqi Lyu, Zhenyang Ni +9 more
benchmark similarity 0.64
Abstract

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill $\times$ constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL$_f$-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

0.51

Surgical Master Console Using General-Purpose Robot Arms and a Separable Articulated Distal Interface: Porcine In-Vivo Evaluation

cs.RO ·2026-09-27 ·Minsung Kim, Seonho Shim, Dongho Yee, Younghoon Noh, Juahn Oh +7 more
similarity 0.63
Abstract · Submitted to IEEE ICRA 2027

High-performance surgical master consoles offer intuitive articulated manipulation but are expensive and difficult to reproduce, while accessible commercial haptic devices lack built-in interfaces for surgical wrist articulation and continuous grasp. We present a laparoscopic master in which general-purpose robot manipulators provide the programmable base and surgical-specific interaction is concentrated in a separable distal adapter. Each 6-DoF arm carries a custom 2-DoF direct-drive wrist, continuous grasp sensing, and clutch-based workspace management; the complete bimanual hardware costs approximately US$5,500, below common bimanual commercial haptic references. To support sustained hand-guided use, we characterize current scaling, gravity, and break-away friction and use them for posture-dependent gravity compensation and motion-gated assistance, reducing continuous actuation and thermal loading. A common master state drives either Isaac Sim or an RCM-constrained dual-FR3 platform. Master-state publication to FR3 target update adds at most 8 ms, and tip tracking shows 0.31-0.66 mm mean delay-aligned residuals. In a porcine cholecystectomy experiment, five common operator-side metrics and hand/tip-speed distributions were compared descriptively with human in-vivo telemetry from 120 clinical Versius recordings of 99 cholecystectomy procedures; no interruption originated from the master console, and no abnormal clinical signs were recorded during the 7-day postoperative observation period. These results demonstrate a surgical master built from general-purpose robot arms with surgical-specific interaction concentrated in a separable distal interface.

0.32

Safety-Critical Bilateral Teleoperation for Omnidirectional Aerial Manipulation Using Force-Sensorless Haptic Feedback

cs.RO ·2026-08-22 ·Yubin Kim, Jinwoo Lee, Yongjun You, H. Jin Kim, Jeonghyun Byun
published similarity 0.63
Abstract · 8 pages, 10 figures. Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This paper presents a safety-critical bilateral teleoperation framework for omnidirectional aerial manipulators that integrates visual and force-sensorless haptic wrench feedback. Unlike existing approaches that either rely on onboard force/torque sensors or use model-dependent wrench estimates, which may become unreliable under model uncertainties or induce unintended feedback during free-flight, our method implements a hierarchical safety filter based on control barrier functions to avoid such limitations. The safety filter, being the key contribution, explicitly accounts for tracking errors arising from physical interaction between the aerial manipulator and its surroundings while enforcing thrust limits, a factor overlooked despite its critical importance for flight safety. This safety filter adjusts the command from the operator to ensure safe and stable aerial manipulation and avoid motor saturation. The adjustment made by the filter is mapped to haptic feedback, which is intuitive to the operator and conveys information on physical interaction and impending motor saturation. By actual experiments with a hexarotor-based omnidirectional aerial manipulator, we demonstrate that the proposed method avoids haptic feedback during free-flight, provides directionally consistent feedback under physical interaction, and can be operated for diverse manipulative tasks. Moreover, an ablation study further shows that the saturation filter improves interaction stability by explicitly preventing motor saturation and informing the operator of corrective actions.

0.37

ConGraspXL: Controllable Constraint-Conditioned Dexterous Grasping Motion Synthesis

cs.RO cs.CV ·2026-09-14 ·Hui Zhang, Mirko Meboldt, Jie Song
similarity 0.63
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Dexterous grasping is usually conducted for specific tasks, leading to heterogeneous constraints such as specific approach directions, desired contact regions, specified wrist trajectories, and functional hand poses. Our previous work, GraspXL, achieves scalable grasping motion synthesis for diverse objects and hand morphologies, while lacking controllability for synthesis under such various task-driven constraints. In this paper, we propose ConGraspXL, which extends GraspXL with controllable constraint-conditioned grasp motion synthesis that accommodates diverse task-driven constraints and their combinations. We introduce a hierarchical constraint formulation, enable flexible constraint composition with a masked residual interface, and improve control precision with dynamic hand centers and feed-forward wrist guidance. Without losing the strong generalization capabilities of GraspXL, ConGraspXL enables precise and flexible controllability for various individual constraints and their combinations, providing a plug-and-play low-level grasp controller for downstream applications such as whole-body grasp completion, functional grasping, and human-motion imitation.

0.51

Jacobian State Augmented Viable Kinematic Safety Filter

cs.RO eess.SY ·2026-10-11 ·Siddharth Singh, Joshua Vaughan
similarity 0.63
Abstract · 8 pages, 8 figures, conference submission

Safety Filters (SF) are leveraged to design certifiably safe controllers, which ensures forward invariance on a defined safe set when the filter is feasible. Predictive Safety Filters (PSF) embed these constraints to a closed-loop model-based optimization method to improve constraint satisfaction, and reduce feasibility loss caused by myopic, one-step filtering. Related viability-based methods emphasize approximating a viability kernel which ensures admissible control for all future time, but requires significant computational expense. This work introduces a Jacobian-based kinematic safety filter leveraging an augmented state variable with task-space velocity and filters task-space acceleration to preserve the feasibility of a low-level filter while enforcing joint position and velocity. The proposed method introduces a nested Quadratic Program (QP) formulation, defines a conservative inner approximation of viability envelope and computes a viable planner online. The method is validated in a simplified 2R planar manipulator simulation environment and shows significant improvement compared to a baseline Control Barrier Function Quadratic Program (CBF-QP) based filter. The experiments highlights the improvements in terms of computation time compared to traditional PSF and Reference Governor approach while also showing significant reduction in feasibility violations. Lastly, a simplified demonstration on a simulated 6-DoF manipulator highlights the potential scalability of the method to higher degree-of-freedom setups.

0.13

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

cs.RO ·2026-09-22 ·Sunyu Wang, Jean Oh, Nancy S. Pollard
hot direction similarity 0.62
Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

0.33