CS Paper Radar

Topology Construction Algorithms for DECT NR+ in Normal and Ultra-Dense Deployments

Andrey Samuylov, Dmitri Moltchanov, Roman Glazkov, Juho Pirskanen, Jussi Numminen, Mikko Valkama

cs.NI ·submitted 2026-10-08 19:49 UTC · v1

Abstract

The 5G-grade DECT NR+ technology designed to support massive machine-type communications (mMTC) relies on the decentralized mesh connectivity concept. The currently utilized topology construction algorithms are very sensitive to the node density, which causes interference at the node association phase and may lead to instable topologies. In this study, we propose several algorithms that need to be utilized at relay and leaf nodes to allow stabilization of the topology: (i) load-dependent relay allocation, (ii) hysteresis-based association control, (iii) blacklist-based association control, and (iv) smart beacon placement. Due to the complex interference structure in DECT NR+ mesh systems, we utilize system-level simulations to assess the performance in both normal and ultra-dense conditions in terms of the efficiency of topology construction and the performance characteristics of the resulting topology. Our results show that dense DECT NR+ networks do suffer from topology instability, with reassociation rates exceeding 10 per second and recovery times lasting over 10 minutes. By implementing the proposed mechanisms, the network dynamically scales, reducing the number of required relays by more than half, from 34% to 15%. They also stabilize the topology by reducing the reassociation rates to just 2-3 per second allowing large-scale networks of several hundred nodes to operate efficiently.

Comment
14 pages, 17 figures. Submitted to IEEE Transactions on Mobile Computing

Closest papers

Nearest neighbours by meaning across the whole index.

Topology-Aware Integrated Sensing, Communication, Charging in Massive Low-Altitude Wireless Network

cs.IT ·2026-10-01 ·Han Yu, Jiajun He, Zhaofeng Liu, Hing Cheung So
published similarity 0.57
Abstract

Future low-altitude wireless networks (LAWNs) are expected to simultaneously support sensing, communication, and charging, resulting in tightly coupled multi-objective optimization problems with strong interdependencies among heterogeneous functions. However, existing multi-objective frameworks typically rely on complex problem-specific formulations and alternating optimization procedures, which suffer from high computational complexity and limited scalability in large-scale, highly dynamic deployments. In this paper, we propose a unified topology-aware (TA) framework that abstracts terrestrial and non-terrestrial devices as nodes, and models their interactions as edges, forming a bipartite graph representation of the LAWN. By leveraging this graph representation, we develop a low-complexity topology reconfiguration algorithm based on a unified resource-adjustment rule. Simulation results demonstrate that the proposed TA-based method consistently outperforms state-of-the-art approaches in multi-functional coordination efficiency, while maintaining robustness and scalability in scenarios involving massive terrestrial and airborne user equipments.

0.34

Movable-Element STAR-RIS for 6G Non-Terrestrial Networks: Architectures, Enabling Technologies, and Open Challenges

eess.SP ·2026-09-10 ·Wali Ullah Khan, Muhammad Adil
similarity 0.53
Abstract · 9, 4

Non-terrestrial networks (NTNs) are emerging as a key component of 6G systems by extending ubiquitous and resilient connectivity across satellite, aerial, and terrestrial layers. However, severe propagation loss, rapidly varying geometry, Doppler, blockage, and stringent payload and energy constraints make efficient beam and propagation control particularly challenging. Movable-element STAR-RIS (ME-STAR-RIS) offers a new approach by combining full-space transmission/reflection control with reconfigurable surface geometry, thereby introducing an additional spatial degree of freedom for geometry-aware NTN operation. In this article, we first describe the operating principle, movement constraints, and potential hardware realizations of ME-STAR-RIS, and then present representative satellite-borne, aerial-relay, and cross-tier NTN architectures. We discuss the key enabling mechanisms, including joint geometry--electromagnetic optimization, mobility-aware channel acquisition, multi-timescale control, and predictive configuration. A LEO-centered numerical case study compares ME-STAR-RIS with an otherwise identical fixed STAR-RIS and demonstrates the benefit of element mobility across different transmit powers, movement ranges, and surface sizes, while revealing diminishing returns from increasingly large displacements. Finally, we discuss the main hardware, CSI, scalability, near-field, sensing, security, reliability, and standardization challenges, and highlight promising directions toward practical ME-STAR-RIS-enabled NTNs

0.18

RIS-Enabled Integrated Access and Relay: Empowering Collaboration Among BSs

cs.NI ·2026-09-22 ·Hao Lin, Mustafa A. Kishk, Mohamed-Slim Alouini
published similarity 0.53
Abstract · 7 pages, 5 figures, 1 table, IEEE Internet of Things Magazine

The increasing number of Internet of Things (IoT) devices and applications leads to severe access congestion in conventional base station (BS) networks. Meanwhile, the low transmit power of IoT devices requires larger diversity gains from the system design. Therefore, low-cost traffic management and signal enhancement mechanisms become essential. Reconfigurable intelligent surfaces (RISs) are increasingly significant due to their flexibility and efficiency. Using reflection, refraction, and amplification, RISs can act as innovative relay nodes to overcome spatial limitations caused by blockages, and improve the coverage range of existing infrastructure. However, more extensive applications of RISs remain to be explored. In this paper, we propose to deploy co-sited RISs on BSs and use the integrated access and relay (IAR) architecture to enable wave-domain task-offloading between BSs, without requiring extra infrastructure or incurring extra decoding latency. Considering the fixed and dynamic sub-carrier schemes, we show the performance improvement in cell-free networks and cellular networks. In addition, we investigate the effect of RIS elements allocated to each IoT device in both cell-free and cellular networks. Finally, we discuss the opportunities and challenges of IAR BSs for future communications design.

0.44

Topology Design for Distributed Consensus with Relay-Assisted Communication

eess.SY math.OC ·2026-10-06 ·Shuyi Ren, Zheng Chen, Erik G. Larsson
publishedunusual similarity 0.51
Abstract · 5 pages, 4 figures. Accepted by IEEE SPAWC 2026

This paper focuses on relay-assisted topology optimization to accelerate the convergence of distributed consensus algorithms over weakly connected networks. Instead of permanently adding a fixed set of relay links, we introduce a time-sharing framework where multiple relay configurations are activated in a probabilistic manner. An ActiveSet-based algorithm incrementally constructs candidate relay edge sets and jointly optimizes the mixing matrices and the associated relay set activation probabilities, allowing adaptive relay selection in the optimization process. Simulation results demonstrate a substantially improved performance-cost trade-off compared with fixed-cardinality relay selection strategies.

0.37

SL-RFSIM: Enabling Scalable Multi-Hop 5G NR Sidelink Mesh Networking in OpenAirInterface

cs.NI ·2026-10-01 ·Simone Pio Candido, Jin Yan, Jérôme Härri
code/data similarity 0.51
Abstract

Recent 3GPP releases have extended 5G New Radio (NR) Sidelink (SL) to support device-to-device (D2D) relay and multi-hop capabilities. This paper presents SL-RFSIM, a component-based experimentation framework extending OpenAirInterface (OAI) with scalable multi-hop NR SL capabilities. SL-RFSIM replaces the legacy OAI RF simulator with a broker-based publish/subscribe architecture enabling arbitrary peer-to-peer connectivity while preserving compatibility with the OAI protocol stack. The framework further integrates pluggable mobility, propagation, reception, and monitoring services, and supports Layer-2 mesh networking through BATMAN-adv. Experimental evaluation on the SLICES-RI research infrastructure validates the proposed architecture through representative mesh networking scenarios and identifies the current software bottlenecks limiting scalability. SL-RFSIM provides an open-source foundation for reproducible experimental research on 5G NR SL and future multi-hop cellular mesh networks.

0.28

GeoRIS: Geofencing With Reconfigurable Intelligent Surfaces

cs.NI eess.SY ·2026-09-17 ·André Gomes, Arthur S. de Sena, Luiz A. DaSilva, Jacek Kibilda
similarity 0.50
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Geofencing refers to controlling the availability of wireless services within a network perimeter. In this paper, we study how RIS can be used to achieve geofencing in outdoor-to-indoor network scenarios. Particularly, we propose GeoRIS, a RIS controller that achieves geofencing by exploiting beam management procedures to control beam alignment in networks with steerable directional transmission links. GeoRIS does not require control over the outdoor base station and can work with or without channel state information. Through simulations based on 3GPP network models, we validate GeoRIS and demonstrate that it can "shield" an indoor network area (for example, by weakening communication links to the point where indoor users cannot meet the minimum requirements of 5G eMBB services). We also highlight an interesting insight: the same RIS can play a dual role, extending or inhibiting outdoor-to-indoor communication. In our simulations, we show that GeoRIS can easily change an indoor space from a "strongly covered area" (e.g., supports eMBB services in approx. 90% of network area) to an "out-of-service area" (e.g., inhibits eMBB services in approx. 90% of network area), or vice-versa, an attractive characteristic in scenarios in which dynamic indoor coverage control is needed.

0.26

Quantifying the Relay-Coverage Trade-off in Mobile Multihop Flooding

cs.NI cs.LG ·2026-10-29 ·Johannes F. Loevenich, Thies Möhlenhof, Roberto Rigolin F. Lopes
unusual similarity 0.50
Abstract

Network-wide flooding in mobile multihop networks selects relays from locally maintained topology information. Mobility makes this information outdated, leaving two basic responses: add redundant relays or refresh the topology and re-select relays more frequently. How these mechanisms trade reliability for overhead, however, is not well quantified. We quantify this trade-off on a public trace of 157 vehicles using Optimized Link State Routing version 2 (OLSRv2) and exact minimum-cost relay sets. Twofold coverage increases median relay-cover lifetime by only 2.3x, rather than about an order of magnitude as predicted by an independent-hazard model. The limitation is structural: 43.6 % of two-hop neighbours have only one possible relay, and newly appearing neighbours invalidate existing covers. Moreover, the delivery gain of a second relay falls from 0.061 to 0.016 when relay selection uses instantaneous link state, showing that redundancy mainly compensates for outdated topology information. Relay coverage and topology refresh therefore form a measurable redundancy-freshness trade-off rather than independent robustness mechanisms. In our trace, twofold coverage has lower overhead below about 100 bit/s of application flooding per node, whereas fresher topology information has lower overhead above it. This makes relay redundancy a load-dependent design choice rather than a fixed heuristic robustness setting.

0.26

HAPS-RIS or HAPS-Relay: Which Outperforms Under Impairments with NOMA in 6G NTN?

cs.NI ·2026-09-09 ·Bilal Karaman, Faicel Khennoufa, Ilhan Basturk, Metin Ozturk, Ferdi Kara +2 more
published similarity 0.50
Abstract · accepted in GLOBECOM 2026

This paper investigates the performance of high-altitude platform station (HAPS)-assisted communication systems employing either reconfigurable intelligent surfaces (RIS) or relay stations (RS) under non-orthogonal multiple access (NOMA) scheme. Practical system impairments, including hardware impairments (HWI) and imperfect channel state information (CSI), are explicitly considered. The results show that HAPS-RIS outperforms HAPS-RS in terms of both sum-rate and energy efficiency under non-ideal conditions due to its passive nature, which avoids noise amplification. Furthermore, it is demonstrated that RIS element allocation and user spatial distribution significantly impact NOMA performance, where increased user separation and proper allocation enhance channel disparity and improve system efficiency. Despite its higher sensitivity to imperfect CSI, HAPS-RIS can effectively compensate for performance degradation through large-scale RIS element deployment, maintaining a performance advantage over half-duplex RS-based systems. These insights provide useful design guidelines for impairment-aware HAPS-assisted 6G communication systems.

0.44