CS Paper Radar

Direct Vector Field Guidance for Path Following

Amit Shivam, Nikhil Kumar Singh, Luís Tiago Paiva, Fernando A. C. C. Fontes

eess.SY ·submitted 2026-10-09 13:28 UTC · v1

Abstract

This paper presents a path-following guidance framework for a turn-rate-constrained unmanned aerial vehicle (UAVs). The proposed guidance strategy uses commanded course angle as a tanh-hyperbolic shaping function of the lateral deviation from the desired path. Stability characteristics illustrating asymptotic convergence to the desired path are established using Lyapunov analysis. Analytical expressions for the turn-rate and corresponding maximum turn-rate bound are derived, enabling direct gain selection for a turn-rate-limited vehicle. Numerical simulations are performed for straight-line following scenarios under both ideal and non-ideal initial heading conditions. Furthermore, a comparative study against representative arctan-, arcsine-, and arccos-based vector-field guidance laws is conducted using analytically feasible gains selected from their respective turn-rate bounds. Comparative numerical results demonstrate the proposed formulation achieves reliable boundary convergence while maintaining smooth steering behavior and a compact analytical gain-design framework.

Closest papers

Nearest neighbours by meaning across the whole index.

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.66
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

Three-Dimensional Impact Angle Control Guidance Law with Field-of-View Constraint

eess.SY ·2026-11-15 ·Aswin D Menon, Sayantan Pal, Sikha Hota
similarity 0.63
Abstract · 20 pages, 7 figures

This paper presents a novel impact angle control guidance law to address the challenge of achieving any desired impact angle while satisfying the seeker's Field Of View (FOV) limit and maintaining acceleration continuity. The guidance problem is decomposed into two two-dimensional (2D) engagement planes. In the first plane, a pure proportional navigation guidance (PNG) law is employed toward a virtual target to align the missile velocity vector with the line-of-sight (LOS) to the target. In the second plane, a two-stage time-varying biased PNG (TVBPN) strategy is utilized to accurately shape the trajectory and achieve the desired terminal impact angle while maintaining compliance with FOV limitations. The position of the virtual target point ensures a smooth and continuous lateral acceleration at the transition between the first and second stages. The effectiveness and feasibility of the proposed law were validated through numerical simulations.

0.21

Quadrotor Guidance for Tasks along Elliptical Boundary

eess.SY ·2026-10-23 ·Ravi Khandelwal, Ashwini Ratnoo
similarity 0.63
Abstract

This paper presents a guidance method that enables a quadrotor uncrewed aerial vehicle to perform inspection tasks along an elliptical boundary enclosing a structure of interest. The proposed guidance approach leverages a bifurcation theory-based framework that supports multiple inspection tasks, including convergence to a desired viewpoint, switching between viewpoints along the boundary, constant-speed elliptical circumnavigation, and circumnavigation with sectorial dwell-time constraint. Stability analysis of the proposed guidance dynamics establishes convergence of the generated reference trajectories to the desired behavior. The control parameters in the proposed method further allow the settling time of the reference trajectory to be specified for each task. The resulting reference velocity expressions are closed-form and algebraically simple, facilitating practical implementation. A qualitative comparison with existing guidance methods highlights the flexibility of the proposed approach in achieving different inspection tasks through a unified framework, while relying on simpler guidance computations. The proposed guidance method is validated through numerical simulations using a six-degree-of-freedom quadrotor model with model uncertainties, and a cascaded sliding-mode controller that tracks the generated reference trajectories under bounded disturbances.

0.24

Optimal Guidance with Terminal Intercept-Angle Constraints and Acceleration Bounds

eess.SY math.OC ·2026-09-23 ·Yoav Azaryahu, Vitaly Shaferman
similarity 0.60
Abstract · This work has been submitted for journal publication. 37 Pages, 9 figures

Terminal intercept-angle control against a maneuvering target can substantially increase the required missile acceleration, potentially leading to saturation and interception failure unless acceleration limits are explicitly addressed. The engagement is therefore formulated as a linear-quadratic optimal-control problem with bounded acceleration commands. Polynomial approximations of the line-of-sight projection coefficients are used to better represent the nonlinear engagement geometry and estimate the time-to-go. The bounded optimal command is derived over saturated and unsaturated arcs, whose switching times are computed at each guidance step. The guidance law is derived for arbitrary linear missile dynamics and implemented for zero-order missile dynamics. For the zero-order model, the conditions under which the terminal demands can be met are derived in closed form, yielding the minimum and maximum reachable commanded terminal intercept angles. Performance is evaluated in nonlinear simulations. Compared with its unconstrained counterparts, the bounded formulation yields substantially smaller miss distances and terminal-angle errors when saturation is encountered. Unlike corresponding bounded miss-only guidance laws, the proposed law does not reduce to its unconstrained counterpart for minimum-phase missile dynamics because the acceleration command can saturate near the end of challenging engagements. The bounded law anticipates this saturation and compensates through earlier maneuvers.

0.17

Flatness-Based Geometric Path Following via Guiding Vector Fields

eess.SY ·2026-10-06 ·J. P. van Gool, H. G. de Marina, B. Jayawardhana, S. Ahmed
similarity 0.58
Abstract

Path following requires an agent to converge to and traverse a geometric path without a prescribed timing law. Guiding vector fields (GVFs) address this directly, but as guidance laws they offer no mechanism to compensate for the agent's own dynamics. Differential flatness-based control (DFBC), on the other hand, compensates for the agent's nonlinear dynamics but relies on a time-parameterized reference trajectory. This letter presents a unified algorithm, which we term flatness-based geometric control (FGC), that generates the DFBC reference hierarchy directly from a GVF and its higher-order time derivatives, eliminating the need for a pre-planned time-parameterized trajectory while retaining full dynamics-informed control. A cascade Lyapunov argument establishes exponential convergence of the tracking error and the physical trajectory to the desired path. The framework is further extended to singularity-free GVFs, which removes the topological obstruction and guarantees the condition for global exponential convergence on closed or self-intersecting paths. The proposed algorithm is validated in simulation.

0.26

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.58
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13

Aerodynamic Prior-Free Coordinated Trajectory Generation and Tracking Control for a Tail-Sitter UAV

cs.RO ·2026-09-10 ·Erchao Rong, Zihao Liu, Junning Liang, Jianguo Wang, Xiao Jie +3 more
top venuecode/data similarity 0.57
Abstract

This paper presents a coordinated trajectory generation and tracking control framework for a tail-sitter unmanned aerial vehicle (UAV), which does not require aerodynamic priors identified for a specific airframe while addressing the challenge of flight control under highly nonlinear aerodynamics across the full flight envelope. The core innovation lies in employing phase-specific aerodynamic modeling strategies for planning and tracking, tailored to their distinct functional characteristics, without requiring airframe-specific aerodynamic priors. Specifically, the phi-theory model under coordinated flight is employed to derive an analytic differential flatness mapping, and a simplified but locally accurate model is established for predictive control to enable real-time aerodynamic parameter estimation. The proposed framework is evaluated extensively through both simulation and challenging real-world flight tests under mild wind conditions, showing high-precision tracking and adaptability across the tested aerodynamic conditions. To the best of our knowledge, this is the first real-world demonstration of accurate trajectory tracking over tested flight regimes spanning the full envelope of a tail-sitter UAV without relying on aerodynamic identification campaigns. The source code of our framework is available at: https://github.com/SYSU-HILAB/AP-PnC.

0.34

CBF-Based Control Allocation for Omnidirectional Tiltrotor Aerial Robots

cs.RO ·2026-10-15 ·Seobeom Lee, Hyondong Oh
similarity 0.56
Abstract · 11 pages

Actively tilting aerial robots can generate six-dimensional wrenches, but slow servo response can make a desired wrench infeasible during reconfiguration. This paper develops a control barrier function (CBF) allocator that preserves wrench feasibility under bounded servo-configuration mismatch. An exact equivalent-wrench identity connects the thrust required at nominal and actual configurations. For a nonsingular six-channel allocation map, inverse allocation reduces robust wrench containment to twelve thrust margins tightened by an ellipsoidal reserve. Their complete derivatives yield a six-variable servo-rate quadratic program, followed by differential thrust allocation for tracking. A conditional forward-invariance result establishes actual-configuration feasibility under reserve coverage, feasible initialization, and admissible CBF inputs. A complementary MuJoCo study evaluates a measured-angle implementation against geometric, augmented differential, and normalized differential allocation in circular and cartwheel maneuvers, with and without disturbances. The proposed implementation achieves lower position error in all four recorded scenarios, with an attitude tradeoff in circular tracking. During the disturbed cartwheel, the desired wrench is feasible at all 1751 stored samples of continuous rotation; baseline violation rates range from 60.8% to 100%. These comparisons evaluate sampled feasibility; validation of the nominal-trajectory certificate requires nominal-state and reserve-coverage records.

0.36