CS Paper Radar

Comparative Robustness of Mach-Zehender and Microring Photonic Matrix Multipliers Under Laser RIN and Thermal Drift

Andreas Falkenberg

cs.AR physics.optics ·submitted 2026-10-11 06:57 UTC · v1

Abstract

Photonic matrix multipliers can accelerate neural-network inference, but their practical utility depends on how optical weight elements respond to source noise, thermal variation, and calibration error. This paper compares Mach-Zehnder modulator (MZM) and microring-resonator (MRR) implementations under laser relative-intensity noise (RIN), column-wise thermal/phase drift, and their joint action. Two CIFAR-10 classifiers - a compact four-layer CNN and ResNet-8 - are mapped to matched photonic multiply-accumulate chains using common source-distribution, detection, numerical, and calibration assumptions. Both architectures reproduce the same zero-perturbation baseline for each workload: 79.5% classification accuracy for the Small CNN and 70.0% for ResNet-8. Robustness is then evaluated using separate RIN-only and drift-only sweeps and a full two-dimensional RIN-drift grid, with dimensionless RMS perturbation levels extending from 0.5% to 20%. The analysis reports classification accuracy, class normalized confusion matrices, rolling-accuracy traces, one-dimensional robustness curves, and multidimensional response surfaces. Device equations and parameter definitions follow the models implemented in the QPI Labs Photonic Inference Simulator, with shared laser fluctuations propagated as correlated multiplicative noise and slow drift represented as a per-output-column perturbation of calibrated weights. All numerical results are generated from recorded experiment configurations and random seeds. The study provides a controlled system-level framework for comparing interferometric and resonant photonic weight elements while limiting conclusions to the implemented device models, perturbation ranges, calibration policy, and neural-network workloads.

Comment
22 pages, 16 figures

Closest papers

Nearest neighbours by meaning across the whole index.

SPARC: Accurate Photonic Matrix Multiplication via Representative Vectors

cs.AI ·2026-11-12 ·Yasuhiro Fujiwara, Tatsuhiro Nakamori, Hideyuki Kawashima
similarity 0.62
Abstract · 11 pages, 5 figures, 3 tables

Photonic neural network accelerators have emerged as a promising solution for reducing the power consumption of deep neural network (DNN) inference by executing matrix multiplication on analog photonic hardware. However, their inference accuracy is limited by low-bit quantization required for photonic processing and by analog photonic noise. This paper proposes an approach for improving inference accuracy by exploiting the high similarity among activation vectors in DNNs. Specifically, our approach constructs a representative vector for each group of similar activation vectors, computes its inner product digitally with high precision, and offloads the residual inner products to the photonic accelerator. Since the activation vectors within each group are highly similar, the residual vectors have much smaller norms, thereby reducing the effects of quantization errors and analog photonic noise. Furthermore, our approach preserves the photonic inner-product computation pipeline, allowing seamless integration into existing and future photonic accelerators without hardware modification. Experimental results on six representative DNN models demonstrate that the proposed approach can improve inference accuracy across diverse network architectures and application domains.

0.32

Architectural Principles for Parameter-Efficient Unitary Transformations in Coherent Optical Neural Networks

cs.LG cs.ARphysics.app-phphysics.optics ·2026-11-16 ·Kazuo Aoyama, Hiroshi Sawada, Shota Kita, Akihiko Shinya, Masaya Notomi
similarity 0.61
Abstract · 28 pages, 28 figures

Coherent optical neural networks based on interferometric architectures offer a promising route toward high-throughput, energy-efficient computation by exploiting the multiple degrees of freedom of light, including spatial, temporal, and spectral modes. However, practical implementations are constrained by the number of tunable parameters due to fabrication complexity, device footprint, and control overhead. In such parameter-constrained settings, achieving high expressive power remains a central challenge. We identify two key architectural requirements for maintaining high expressive power under these constraints: (i) statistical uniformity in the implemented transformations and (ii) strong mixing capability per parameter, which enables rapid and unbiased redistribution of information across modes. To realize these requirements, we develop a logarithmic-depth butterfly-topology architecture whose fundamental building block is a single phase-shifter--beam-splitter pair, in contrast to conventional rectangular mesh architectures based on Mach-Zehnder interferometers. Computational evaluations show that, particularly at restricted parameter counts, the proposed architecture achieves lower matrix-reconstruction errors and higher classification accuracies than conventional meshes in both feedforward and recurrent networks. We further quantify these design principles using graph-theoretic measures, expected squared moduli of transformation-matrix entries, and matrix-reconstruction error. The resulting framework provides a quantitative and physically interpretable basis for parameter-efficient optical neural networks.

0.36

LCAP: Population-Informed Latent Chip Adaptation from Few Output Probes for Photonic Neural Networks

cs.LG ·2026-09-15 ·Tianyu Gao, Guantian Zheng
similarity 0.59
Abstract · 5 pages, 3 figures, 2 tables

Photonic neural networks (PNNs) offer efficient analog inference, but parameters optimized under ideal device models can degrade after fabrication, creating a persistent simulation-to-hardware (sim-to-real) gap. When many identically designed chips are deployed, calibrating each device from scratch compounds this cost. We propose Latent Chip Adaptation from Probes (LCAP), a population-informed framework that decomposes hardware adaptation into a transferable population correction and probe-inferred latent personalization. LCAP first learns a shared correction from 80 historical chips, then extracts a low-dimensional correction space from device-specific refinements. At deployment, 32 fixed unlabeled output probes infer an unseen chip's latent correction coordinates, enabling feed-forward personalization without target-device optimization. On a three-layer 64-mode MZI simulator with phase variation, beam-splitter errors, quantization, and crosstalk, accuracy improves from 80.4147% under direct deployment to 92.6860% after shared calibration and 93.3617% with LCAP. LCAP improves 27/30 unseen chips and raises worst-device accuracy from 89.18% to 90.54%.

0.31

Cross-Layer Analysis of Thermal Tuning Stalls in Wafer-Scale Optical Interconnects for LLM MoE Training

cs.AR ·2026-08-25 ·Seongwon Yoon, Pin-Jun Chen, Shimeng Yu
unusual similarity 0.59
Abstract

Mixture-of-experts (MoE) training depends heavily on all-to-all communication, which wafer-scale optical interconnects with dense wavelength-division multiplexing can serve. Their microring resonators rely on thermo-optic tuning, while MoE compute bursts swing the photonic-layer temperature by about 10 K within tens of milliseconds. This paper quantifies the communication stall by coupling packet-level network simulation, transient thermal simulation of a 3D-stacked GPU and photonic die, and a ring detuning criterion, and by feeding the stall back into the network timeline until both agree. Including this feedback, a tracking loop at the measured 5 nm/s lengthens the training iteration of Mixtral 8x7B and LLaMA-MoE 6.7B by factors of about 1.16 and 1.25 at full model depth. Measured H100 die temperatures match the modeled swing of 300 ms bursts within 15%. A loop slewing eight times faster, a heater driven at each kernel launch, or a dummy load near 75% of peak power removes the stall. An athermalized lithium-niobate ring with a non-volatile ferroelectric setpoint removes it with no holding power or fast loop, which makes it suitable for wafer-scale optical interconnects.

0.49

PISim: A Unified Photonic Inference Simulator for Hardware-Aware Cross-Layer Design-Space Exploration

cs.AI physics.optics ·2026-11-12 ·Andreas Falkenberg
similarity 0.58
Abstract · 8 pages, 2 figures

Photonic neural accelerators offer ultra-low latency linear algebra, yet their usable numerical precision, sustainable throughput, and application accuracy remain tightly bounded by surrounding electro-optical interfaces and physical non-idealities. Pre-fabrication design-space exploration (DSE) requires a cross-layer electronic design automation (EDA) framework capable of evaluating disparate optical topologies under identical neural workloads and physical assumptions. We present \textbf{PISim}, a unified Photonic Inference Simulator that couples pretrained deep neural network execution with physics-based models of six accelerator architecture families, six electro-optic modulator technologies, four optical source organizations, and direct or coherent readout schemes. PISim embeds stage-resolved impairment operators---covering control and analog-to-digital quantization, finite extinction ratio, shot noise, correlated relative-intensity noise (RIN), thermal drift, propagation loss, and channel crosstalk---alongside an analytical cycle-level interface timing model to expose electronic-optical bottlenecks. Using simulated MNIST multilayer perceptron (MLP) benchmarks, we demonstrate how PISim identifies optimal precision operating points under multi-impairment stress (peaking at 6 bits for Mach--Zehnder and microring modulators), quantifies a 52.5 percentage-point accuracy gap between VCSEL-array and parallel-fanout laser architectures arising, under the modeled conditions, from power partitioning and correlated source noise, and models interface-limited throughput scaling across emitter-array widths from 32 to 128 channels. This comprehensive framework establishes an extensible, reproducible foundation for accuracy-constrained Pareto optimization prior to photonic tape-out.

0.31

Q-PACE: Dynamic Precision Allocation for Quantization-Aware Training

cs.LG ·2026-10-06 ·Alexandra Volkova, Matin Ansaripour, Erik Schultheis, Christoph H. Lampert, Dan Alistarh
similarity 0.55
Abstract

Quantization-aware training (QAT) leverages lower-precision arithmetic to reduce the cost of LLM deployment, but aggressive quantization degrades final model performance. A common remedy is mixed-precision training, in which high precision is assigned to some of the layers to maintain performance while keeping the cost constrained. This approach then requires precision assignments for model layers during training. We provide a new approach, called Q-PACE, consisting of a second-order sensitivity model that predicts the loss increase as a sum of quantization noise MSE weighted by per-layer curvature coefficients. During training, we periodically re-compute these coefficients using perturbations across layers, and re-assign precision. Pretraining and supervised fine-tuning experiments on LLMs of up to 4B parameters show that Q-PACE consistently improves over existing mixed-precision training recipes, and achieves comparable loss at substantially lower total memory budgets. We further find that quantization sensitivity is highly predictable by depth and layer type, and its stability during training allows for infrequent, cheap recalibration.

0.15

RAMP: Robust Adaptive Mixed-Precision Quantization for Edge CPU Vision Models

cs.CV cs.LGcs.PF ·2026-09-23 ·David Población-Criado, Dario Garcia-Gasulla, Eduardo Quinones
publishedcode/data similarity 0.55
Abstract · Accepted at the 37th British Machine Vision Conference (BMVC) 2026. 13 pages, 4 figures, 2 tables. Code available at https://github.com/davi…

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of $1.81\times$ over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

0.51

LocalTrain: Integer-Only Local Learning for Energy-Efficient CNN Training on Edge FPGAs

cs.AR cs.LG ·2026-10-12 ·Shiqi Ding, Xuanyu Liang, Xinyang Liu, Boyang Li, Zhiqiang Que +2 more
similarity 0.55
Abstract · 7 pages, 2 figures, 5 tables

Local learning reduces cross-layer training dependencies, but an efficient accelerator must still retain operands, accumulate gradients, and select quantization scales. We present an FPGA system that trains a CNN and its regional auxiliary classifiers using a shared integer matrix engine. Compact errors are expanded on chip, gradients are folded tile by tile, and historical scales permit direct output conversion. At 200 MHz, the KV260 prototype achieves 76.57% accuracy on CIFAR-10 and 91.85% on SVHN at approximately 4.20 W mean module power. Effective matrix throughput is 31.22 and 31.57 GMAC/s, respectively. Against the same integer method on Jetson Orin Nano, measured training energy is 40.4% and 42.1% lower, with $1.86\times$ and $1.82\times$ longer runtime; measurements use the respective platform power domains. Selected state checks and matching complete-run prediction counts support functional agreement with the software reference.

0.14