CS Paper Radar

Learned Graph Bases for Neural Operators on Power-System Transients

Shubhan Bhattacharya, Avi Bagchi

eess.SY ·submitted 2026-10-11 14:27 UTC · v1

Abstract

Fourier neural operators predict power-system transient trajectories with high accuracy. We extend this line of work by examining the choice of spatial spectral basis, studying both the graph Fourier transform derived from the grid's own coupling network and learnable bases trained from that starting point and from a Fourier control. Evaluated in one controlled pipeline across three protocols spanning unseen fault locations and shifted operating regimes, the learnable bases improve on a parameter- and budget-matched DFT variant by 7-14% in distribution, with per-case significance on both in-distribution protocols and no loss on the third; the gain comes from adaptation rather than from the coordinates alone. We further characterize the regime dependence of this gain, identifying its cause, locus, and continuity, and show that a resolution requires no new model: averaging the learned and frozen variants gives the best shift-robust predictor, while their disagreement provides a label-free alarm that flags every shifted case with no false alarms.

Closest papers

Nearest neighbours by meaning across the whole index.

Detecting False Data Injection and Unstable Operation in Smart Grid via System-Aware Graph Boundary Learning

cs.CR ·2026-09-28 ·Emad Efatinasab, Denis Donadel, Mirco Rampazzo, Chuadhry Mujeeb Ahmed
similarity 0.62
Abstract

Cyber-physical power systems increasingly rely on data-driven tools to detect instability and support reliable grid operation. However, reliable stability prediction is difficult when unstable operating configurations are rare, sensitive, or unavailable during model development, since collecting such data safely and at scale is often impractical. At the same time, False Data Injection (FDI) attacks can manipulate reported system parameters to trigger false instability alarms or conceal unsafe operation, and such threats in Decentral Smart Grid Control (DSGC) systems remain largely unexplored. These challenges are rarely addressed jointly, leaving a gap between stability prediction and attack detection that this work aims to close. In this paper, we introduce StarGNN, a graph learning framework that learns the stable operating region exclusively from clean stable configurations and uses a single abnormality score to flag reported configurations that should not be trusted as evidence of safe operation, covering both genuine instability and unseen FDI manipulations. Each configuration is represented as a producer-consumer star graph and processed by a role aware graph neural network, with physics constrained pseudo-negatives generated by perturbing reaction time and price response parameters standing in for the unavailable unstable and attack data. A single threshold, calibrated only on held-out stable data, is used without task or attack specific adjustment. Evaluated on nine unseen FDI scenarios, StarGNN detects between 0.780 and 0.973 of attacks on stable configurations and retains a post attack instability recall between 0.972 and 0.999 on unstable ones, with 0.899 recall against a stronger adaptive attacker, showing that stable-only boundary learning can support both stability prediction and attack detection without access to genuine unstable labels or attack samples during training.

0.13

Graph Machine Learning: An Opportunity for Power Systems

cs.LG cs.AIcs.CEeess.SY ·2026-08-17 ·Martin Sadric, Sebastian Pütz, Christian Nauck, Veit Hagenmeyer, Frank Hellmann +2 more
surveybenchmark similarity 0.60
Abstract

Modern power systems face growing operational complexity driven by the integration of renewable energy sources, decentralization, and the need for real-time decision-making across a wide range of timescales. Addressing these challenges traditionally relies on model-based methods that, while accurate, can be too slow for operational demands. Machine learning (ML) has therefore emerged as a faster, data-driven alternative. As grid topology plays a central role in power system operation, graph machine learning (GML) methods offer a natural framework for incorporating topological dependencies as an inductive bias. We survey nearly 800 papers at the intersection of GML and power systems, covering forecasting, state estimation, optimization, control, fault diagnosis, and cybersecurity. Power systems constitute an unusually rich benchmark setting for GML, as they combine hard physical constraints, multi-scale dynamics, safety-critical requirements, and scarce labeled data within a single, well-defined domain. Conversely, power systems can benefit from utilizing GML to complement classical solvers, as GML provide scalable, topology-aware approximations with promising generalization and computational efficiency. We identify open challenges, including limited real-world deployment and the need for interpretable models in safety-critical settings. Despite the rapidly growing number of publications, standardized benchmarks and open datasets remain scarce, leaving many results difficult to reproduce and undermining the long-term scientific credibility of the field. We further derive a structured requirements catalog for ML-ready power grid benchmarks, intended to guide future dataset development and improve reproducibility across studies. We call on the community to prioritize dedicated benchmark studies and the release of open datasets and models.

0.23

Graph-Based Dynamic Activity Prediction for Real-Time Power System Applications

eess.SY ·2026-11-03 ·Stefanos Eleftheriadis, Mohammad Hashemnezhad, Savvas Panagi, Thibaut Vermeulen, Petros Aristidou
similarity 0.59
Abstract

Online dynamic security assessment and day-ahead planning require rapid identification of where disturbances will produce significant dynamic activity. Full time-domain simulations are computationally demanding, while existing machine-learning approaches predict system-level outcomes or require post-disturbance trajectories. This paper proposes a pair-aware Graph Isomorphism Network with Edge features (GINE) framework comprising two task-specific models for predicting bus-voltage and generator apparent-power activity from the operating point and contingency description. Physically aware KPI cuts convert simulated responses into ordinal activity targets for model training. Evaluations on Nordic 32 and the French transmission system with more than 6 000 buses show that pair-aware fusion and graph embeddings improve on a local baseline on Nordic 32, with GINE the lower-cost graph encoder, and that the framework remains effective at large scale. As a downstream application, the predicted activity maps guide Adaptive Model Simplification, reducing continuous and discrete model variables by 72% and 66%, achieving speedups of up to 3.16x, and preserving voltage trajectories when critical substations are retained. These results demonstrate scalable, pre-disturbance prediction of component-level dynamic activity.

0.29

Graph Neural Network Prediction of Frequency Nadir and RoCoF Under Topology Variations

eess.SY ·2026-11-13 ·Linhan Fang, Fan Jiang, Xingpeng Li
similarity 0.59
Abstract

Accurate prediction of frequency dynamics under varying network topologies is essential for rapid frequency security assessment, whereas repeated electromagnetic transient (EMT) simulations are computationally intensive. This paper develops a topology-aware graph neural network with a radial basis function Kolmogorov-Arnold network (RBF-KAN) regression head, termed RK-GNN, to predict frequency nadir and maximum absolute rate of change of frequency (RoCoF). Scenarios combine load scaling, regional load redistribution, and generator redispatch with intact, N-1, and N-2 transmission topologies. After checks for network connectivity, generator reference limits, and numerical consistency, the retained scenarios are simulated in PSCAD to construct the reference dataset. The RK-GNN is evaluated against a conventional deep neural network (DNN) and a baseline GNN. On the IEEE 39-bus system, the RK-GNN reduces the mean absolute errors (MAEs) of nadir and RoCoF by 48% and 59% relative to the DNN and by 42% and 61% relative to the baseline GNN. Incorporating the bridge indicator and disturbance hop distance yields further MAE reductions of 27% and 54%. These results show that the proposed topology-aware architecture provides accurate prediction of both frequency metrics under varying topologies and substantially reduces the need for repeated EMT simulations.

0.23

A Unified Uncertainty Representation for Graph Neural Networks via Doubly-Spectral Stochastic Expansion

cs.LG cs.AI ·2026-09-28 ·Fred Xu, Thomas Markovich, Florence Regol, Yizhou Sun
publishedtheory similarity 0.59
Abstract · paper already accepted at Neurips 2026

Reliable deployment of graph neural networks requires calibration, out-of-distribution (OOD) detection, and robustness to distribution shift, yet existing methods address these needs with separate models and objectives. We model uncertain node embeddings as random graph signals: graph Fourier filters capture structural variation, and a scalar orthogonal-polynomial chaos coordinate captures latent stochastic variation. The resulting doubly-spectral stochastic (DSS) expansion supplies task-matched readouts from one representation: the mean coefficient encodes class evidence for the energy-based OOD score, the higher-order coefficients encode structured logit variation, and quadrature averaging over the chaos coordinate defines the single predictive distribution used for prediction and calibration. A capacity theorem shows that, under a full-rank feature assumption, a restricted subfamily matches the chaos coefficients of any Gaussian-latent random graph signal, with exponentially decaying truncation error under a growth condition; the task-level claims are established empirically. DSS-GNN has two deployment modes: standalone, or as a residual branch beside a deterministic encoder (DSS-Hybrid). Standalone DSS-GNN achieves the lowest Brier score among the compared uncertainty-aware baselines on all 14 node classification benchmarks without post-hoc correction; DSS-Hybrid achieves the best AUROC on most node-OOD settings, competitive cross-graph OOD detection, and the strongest shifted accuracy on all 7 GOOD concept-shift benchmarks under standard empirical risk minimization (ERM). Cross-evaluating both modes on all three tasks shows that each remains effective on the other's tasks, with documented exceptions, and yields explicit deployment guidance.

0.27

Learning-Based Augmentation and Adaptation for Grid Sim-to-Real Model Discrepancy

eess.SY ·2026-09-18 ·Sayak Mukherjee, Kyung-Bin Kwon, Ramij R. Hossain, Marcelo Elizondo
benchmark similarity 0.59
Abstract · 12 pages, 5 figures, 3 tables

Modern power systems can encounter increased discrepancy between the operators' simulation model and the actual true dynamics of the grid, driven by uncertainties caused by integration of new inverter-based resources (IBRs), large loads, unmodeled dynamics, parameter drifts, etc., to name a few. All of these impact the control room operations, where some critical oscillations may not be captured during the transient studies. To circumvent these issues, we propose a learning-augmented hybrid approach where the operator simulation model is supplemented with artificial intelligence (AI)-learned residual models using the phasor measurement unit (PMU)/ point-on-wave (PoW) based sensed trajectory data. The physics-based operator model provides interpretability and structural consistency, while the learned residual captures discrepancies caused by non-idealities. The learned model employs advanced neural architectures and consists of a backbone encoder and multi-head decoder layers for heterogeneous grid channels. Subsequently, we formulated a continual learning-motivated adaptation framework such that the baseline residual AI model can also be updated when the underlying real grid model changes in future conditions. Extensive numerical simulations are performed on the IEEE 68-bus benchmark model with a diverse set of disturbances, and different state-of-the-art predictive architectures involving recurrent learners, latent neural ODEs, and transformers are explored to demonstrate both residual learning and adaptation capabilities.

0.28

PhyPro-FM: A Physics and Prompt-Guided Graph Foundation Model for Contingency Analysis

eess.SY cs.AIcs.LG ·2026-10-19 ·Xu Yang, Zhanyuan Sheng, Chenhui Lin, Haotian Liu, Qi Wang +2 more
similarity 0.57
Abstract

The continuous evolution of next-generation power systems, characterized by the high penetration of renewable energy resources and dynamic topology variations, poses formidable challenges to traditional N-1/N-2 contingency analysis in terms of computational efficiency and scalability. While deep learning-based methods offer accelerated inference, existing studies predominantly treat contingency analysis as a pure regression problem, often overlooking the physical essence of grid operation and engineering requirements of real-world scenarios. To bridge this gap, this paper proposes a physics and prompt-guided graph foundation model (PhyPro-FM) for generalizable and engineering-viable contingency analysis. The proposed architecture integrates graph neural networks with a learnable global query mechanism and, notably, introduces a prompt-guided learning paradigm. By leveraging historical snapshots as few-shot prompts, the model dynamically captures correlations between target and historical operating conditions, significantly enhancing generalization capabilities under unseen topologies. Furthermore, we design a physics-informed training mechanism that prioritizes branch power flow errors over nodal voltage errors, aligning the optimization objective with critical grid security constraints. To ensure engineering applicability, a physics-informed inference mechanism is also developed, incorporating a residual-based correction module and a specialized post-processing strategy for singular branches to circumvent numerical instability. Comprehensive experiments demonstrate that PhyPro-FM outperforms state-of-the-art methods in accuracy and generalization, validating its superior physical consistency and robustness for practical engineering applications.

0.18

Dynamic State Estimation from Sparse PMUs via Physics-Informed Graph Neural Operators

cs.LG eess.SY ·2026-11-07 ·Huy Hoang Le, Haoguang Wang, Christian Moya, Marcos Netto, Guang Lin
benchmark similarity 0.57
Abstract · 10 pages, 10 figures, 4 tables

This paper proposes a physics-informed graph neural operator for power system dynamic state estimation. From a sparse, intermittent measurement window at a few generator buses, the operator estimates the rotor-angle and speed trajectories of all machines, unmeasured ones included, in one forward pass. A graph-attention encoder processes the measurements, and the swing equations are imposed as a hard constraint or as a soft one with a learned correction that absorbs model errors. It is trained on simulated measurements, without state labels. With several phasor measurement units, masked training hides one from the input but keeps it in the loss. On four transmission systems, simulations show that the operator is the most accurate estimator that neither optimizes per scenario nor uses state labels, except on the smallest system at large model errors, where tuned Kalman smoothers are better. Networks trained on simulated states are more accurate on the two smallest systems but not on the 118-bus system, where the operator is faster and more accurate than hard-constrained moving-horizon estimation. Under model errors, it matches or outperforms an optimization-based benchmark at a fraction of its cost. The results hold for a detailed machine model with exact parameters seen only through voltage phasors.

0.31