CS Paper Radar

Security and robustness analysis of encrypted communications for local home automation: ESPHome Native API and MQTT over TLS 1.3

Carlos Roberto Gonzalez-Escarpeta, Juan Eduardo Garcia Sanchez, José Antonio Hernandez Reyes, Ricardo Francisco Martinez-Gonzalez

cs.CR ·submitted 2026-10-12 15:10 UTC · v1
published

Abstract

The expansion of the Internet of Things (IoT) in residential and local automation environments has highlighted the limitations of considering the internal network as an inherently trusted domain. Man-in-the-middle (MitM) attacks, such as ARP spoofing, can allow traffic interception or manipulation when communications lack appropriate confidentiality, integrity, and authentication mechanisms. This paper presents a systematized review of the security mechanisms used by two communication alternatives between ESP-family microcontrollers and the Home Assistant platform: MQTT protected through TLS 1.3 and the ESPHome Native API, whose encryption is based on the Noise Protocol Framework using the Noise_NNpsk0_25519_ChaChaPoly_SHA256 pattern. The analysis considers four dimensions: cryptographic robustness, attack surface, implementation complexity, and resource consumption. The review identifies significant differences resulting from the architecture and cryptographic model of each alternative. TLS 1.3 provides a standardized framework compatible with public-key infrastructure and formal identity management, though it introduces greater configuration complexity and computational overhead during session establishment. The ESPHome Native API employs a more specialized scheme with lower operational complexity, eliminates dynamic algorithm negotiation, and uses ChaCha20-Poly1305. The resource-consumption analysis relies on measurements published by the projects and manufacturers themselves, not on an experimental test bench, and this limitation is explicitly acknowledged. The results identify the conditions under which each mechanism is appropriate for local home-automation architectures and provide a basis for designing IoT systems that balance security, interoperability, and resource constraints.

Comment
14 pages, 3 figures, 1 table. Systematized review. Submitted to the International Journal of Network Security & Its Applications (IJNSA)
Journal ref
International Journal of Network Security & Its Applications (IJNSA), vol. 18, no. 4/5, 2026, pp. 15-35
DOI
10.5121/ijnsa.2026.18502

Closest papers

Nearest neighbours by meaning across the whole index.

Trust in Edge-Enabled IoT Security: Features, Challenges and Research Directions

cs.CR cs.AIcs.CYcs.ET+1 ·2026-09-21 ·Esin Ece Aydın, Şerif Bahtiyar, Gürkan Gür
similarity 0.61
Abstract · 34+ pages, 9 figures, 12 tables, submitted and under review in ACM Computing Surveys

Providing autonomous intelligence, pervasive connectivity and usability to human life and industry has led to the emergence of the Internet of Things (IoT). To support time-sensitive and resource-constrained applications, IoT systems nowadays increasingly rely on edge computing. This brings computation and decision-making closer to end devices. In edge-enabled IoT architecture, latency and communication overhead are reduced, but interactions among a larger and more diverse set of devices, edge nodes, services, and data sources are introduced as well. In such environments, security and privacy mechanisms provide the foundation for protection, while trust management can assess the reliability of interacting entities and adapting secure decisions. In this paper, we systematically review the current state of trust management in edge-enabled IoT. To this end, we propose a comprehensive taxonomy that maps physical, network, and application architectural IoT layers against the consumer, commercial, industrial, and infrastructure IoT domains. We further investigate state-of-art research based on their trust design, how trust integrated into secure IoT operations, the attacks that effect trust management process. Based on these findings, we identify key gaps in current research and outline future directions for context-aware and adaptive trust management in edge-enabled IoT.

0.31

From Temporary Access to Persistent Surveillance: Why Matter Matters in Smart Homes

cs.CR ·2026-10-02 ·Nicolas Nino, Timothy Minning, Le Guan
similarity 0.58
Abstract · 14 pages, 5 figures

Matter aims to unify smart home ecosystems through an open, interoperable, and secure standard, relying on cryptographic mechanisms for device authentication and data confidentiality. However, its openness also exposes protocol details, credential structures, and implementation characteristics to adversaries. We show that an attacker with temporary physical access can exploit design and implementation flaws to extract credentials and impersonate devices and controllers. These replicas integrate seamlessly into the fabric, enabling persistent surveillance and control even after the attacker departs. Notably, the attack is vendor-agnostic and requires no device-specific reverse engineering, as long as the device is not physically secured. We validate its practicality through a proof-of-concept on a simulated smart home with both commercial devices and development boards. Our findings uncover previously underestimated attack surfaces in Matter, particularly under physical access scenarios, and motivate four targeted mitigation strategies.

0.23

CERTIoT-6G: Continuous Cybersecurity Certification for IoT Devices in 5G/6G Networks

cs.NI cs.CR ·2026-08-24 ·Evangelos Lempesis, Fabio Palmese, Hamed Haddadi, Anna Maria Mandalari
published similarity 0.57
Abstract · Paper accepted for publication at IEEE Conference on Standards for Communications and Networking 2026 (CSCN 2026)

The massive adoption of Internet of Things (IoT) devices across critical domains such as healthcare, smart cities, industrial automation, and critical infrastructure introduces significant cybersecurity and regulatory challenges. Current and forthcoming European regulations, including the Cyber Resilience Act (CRA) and the NIS2 Directive, require manufacturers, operators, and other organizations to ensure secure-by-design devices, continuous vulnerability management, and resilient operation throughout the device lifecycle. Traditional certification mechanisms remain static, manual, and difficult to scale across heterogeneous IoT ecosystems. This paper presents CERTIoT-6G, a Security-as-a-Service (SECaaS) framework that enables automated cybersecurity certification and continuous compliance monitoring of IoT devices operating in 5G and future 6G networks. The framework integrates automated compliance analysis, real-time traffic monitoring, and adversarial testing capabilities. We validate the CERTIoT-6G framework on different IoT device categories operating in an advanced 5G testbed. Evaluation results reveal critical compliance gaps, particularly in traffic encryption and availability under unstable conditions, and demonstrate that the framework produces actionable verdicts mapped to regulatory requirements across heterogeneous device types. Furthermore, we show that the monitoring pipeline has a negligible impact on live 5G traffic.

0.35

A Non-Invasive Cloud-Based Migration Strategy for Post-Quantum Cybersecurity in Smart HVAC Systems: Architecture, Implementation, and Empirical Evaluation

cs.CR cs.AIeess.SY ·2026-08-19 ·Mahedee Zaman Moon, Kaysarul Anas Apurba, Md Hasibul Hasan, Sk Md Mizanur Rahman
similarity 0.57
Abstract · 27 pages, 12 figures (3 architecture diagrams, 9 experimental plots), 6 tables. Preprint; work in progress. Presents a non-invasive post-qua…

Legacy smart HVAC controllers rely on vendor-cloud TLS secured by ECDH and RSA, both broken by Shor's algorithm, and typical 10-15 year lifespans mean today's devices remain in service through the quantum-threat era. Direct on-device post-quantum cryptography is infeasible: an ESP32-S3, representative of capable HVAC hardware, has only 339 KB free heap against the 900 KB ML-KEM-768 requires, and even classical ECDH-P256 keygen (111.93 ms) dwarfs hardware AES-128 (0.032 ms). We propose a non-invasive PQC proxy, requiring no device, firmware, or vendor-cloud changes, performing ML-KEM-768 encapsulation and ML-DSA-65 authentication (NIST FIPS 203/204) with AES-256-GCM session keys via HKDF, implemented with Open Quantum Safe liboqs on a Raspberry Pi 4B gateway. Over 500 runs, the post-quantum handshake (Steps 1-6) completes in 2.48 ms, 0.38 ms slower than classical baseline, with PQC computation around 8% of handshake time at 20 ms simulated round-trip network latency. The gateway sustains 443 sessions/second, 100% success under 32 concurrent connections, extrapolating to 3546 sessions/second on a 32-core cloud instance. Five side-channel tests, including verified in-place session-key zeroization and a fixed-vs-random TVLA timing analysis, found no exploitable timing leakage or susceptibility to man-in-the-middle attacks. The architecture is vendor-agnostic and becomes unnecessary once vendors adopt NIST PQC natively.

0.16

Design and Evaluation of Secure Distributed Chaotic Image Encryption on ESP32-S3

cs.CR ·2026-11-07 ·Mohammed Almozaini, Fazal Noor, Sohail Alhazmi
unusual similarity 0.57
Abstract · 12 pages, 10 figures, 5 tables. Corrected spelling of an author's name; research content unchanged

The limited computational resources of Internet of Things (IoT) devices present challenges for secure image processing. This paper presents a distributed chaotic image encryption system using independent Wi-Fi-connected ESP32-S3 microcontrollers. A master-worker architecture distributes image blocks through master-coordinated chaotic sequence management, maintaining one logically continuous chaotic sequence by assigning block-specific starting states independently of worker assignments. The implemented system uses reversible chaotic substitution (SUBSTITUTE), while Elliptic Curve Digital Signature Algorithm (ECDSA)-signed discovery messages and Transport Layer Security (TLS) 1.3 with mutual authentication secure device communication. Experimental evaluation using one, two, and four workers demonstrates a reduction in execution time from 43.215 to 15.878 seconds, achieving a speed-up of 2.72 times. The encrypted image achieves a Shannon entropy of 7.999940 bits/byte and near-zero adjacent-pixel correlation. Exact image recovery is verified through matching Secure Hash Algorithm 256-bit (SHA-256) hashes and a Structural Similarity Index (SSIM) value of 1.0. Additional experiments demonstrate successful encryption and decryption using different worker counts and block sizes, automatic task reassignment following worker failure, and rejection of a mismatched private key during TLS authentication. These findings demonstrate the feasibility of secure, flexible, and distributed chaotic image processing across independent resource-constrained IoT devices.

0.31

HPQ-AKE: A Provably Secure Sign-Less Hybrid Authenticated Key Exchange Protocol for Bandwidth-Constrained IoT and Edge Networks

cs.CR cs.NI ·2026-10-08 ·Khiem Pham-Tuan, Minh Quang Le, Khuong Nguyen-An
published similarity 0.55
Abstract · Accepted for publication in High-Confidence Computing (Elsevier), October 2026. Author-accepted manuscript. Updated camera-ready version wit…

Securing bandwidth-constrained Internet of Things (IoT) and edge networks during post-quantum migration creates an authentication trade-off: ML-KEM provides post-quantum key establishment, whereas post-quantum signatures increase certificate-chain size, verification cost, and handshake latency. We present HPQ-AKE, a sign-less hybrid authenticated key exchange for RSA-enabled IoT gateways and edge/cloud services that replaces transcript signatures with dual KEMs. HPQ-AKE combines ML-KEM-768 for post-quantum session secrecy and forward secrecy with RSA-OAEP for implicit mutual authentication, preserving existing RSA-enabled infrastructure during migration. We analyze HPQ-AKE in an extended Bellare-Rogaway model, separating classical authentication in the Random Oracle Model from session-key secrecy in the Quantum Random Oracle Model. Under the Module-LWE and RSA assumptions, it establishes AKE security, forward secrecy, and conditional KCI resistance under the long-term-key-only exposure assumptions. Evaluation combines x86 micro-benchmarking, analytical latency modeling, and 10,000-iteration Monte Carlo simulation. HPQ-AKE reduces modeled handshake transmission from 13,009 to 5,668 Bytes, a 56.4% reduction relative to a Hybrid TLS 1.3 Full handshake, while requiring 7.11 ms of total local computation on the measured x86 testbed. Under a simulated 50 kbps satellite-like link with 600 ms RTT and stochastic jitter, median latency is 1,914 ms, 31.4% below the 2,791 ms baseline. At 20 ms RTT, modeled break-even thresholds are 0.31 Mbps against the pre-cached baseline and 4.08 Mbps against the full baseline; both decrease as RTT increases. These x86-based results motivate evaluation on gateway-class IoT and edge platforms; performance on ARM gateways and unaccelerated microcontrollers remains unvalidated.

0.31

Cross-Layer Roots of Trust: Integrating Biometrics, PUFs, and Hardware Obfuscation

cs.CR ·2026-08-21 ·Nima Karimian
survey similarity 0.55
Abstract

Modern cyber--physical, Internet-of-Things (IoT), wearable, and edge systems increasingly require trust in three distinct entities: the human requesting access, the physical device executing the computation, and the hardware function that is permitted to operate. These requirements are usually studied in separate communities. Biometrics establish human identity but remain vulnerable to presentation attacks, intra-user variability, template leakage, and limited revocability. Physical unclonable functions (PUFs) provide device-specific physical identity and on-demand secret derivation, yet must address environmental instability, helper-data exposure, side channels, and modeling attacks. Hardware obfuscation and logic locking condition correct circuit behavior on an activation secret, but face oracle-guided, approximate, structural, removal, and physical attacks. This survey develops a unified human--device--function view of trust. We first decompose each primitive into its complete processing chain and identify the corresponding security assumptions, implementation mechanisms, and evaluation metrics. We then formalize pairwise compositions---biometric--PUF, PUF--obfuscation, and biometric--obfuscation---and a three-way architecture in which correct functionality is bound jointly to an authorized user and a genuine device. Particular attention is given to biometric key reconstruction, PUF stabilization and modeling resistance, logic-locking attack evaluation, cross-layer error propagation, enrollment trust, key lifecycle, and interface leakage. The survey concludes with a taxonomy and research agenda for revocable human--device credentials, compositional security, leakage-aware integration, reconfigurable activation, and standardized end-to-end evaluation.

0.21

Exploring the Suitability of QUIC for the Internet of Things

cs.NI ·2026-08-15 ·Carles Gomez, Nika Soltani-Tehrani, Jon Crowcroft
similarity 0.55
Abstract

QUIC is an emerging transport-layer protocol that provides reliability and security. QUIC was designed to overcome issues from other protocol stacks used in the Internet, such as TCP/TLS, especially focusing on web traffic performance improvement. Therefore, QUIC was not conceived for Internet of Things (IoT) scenarios, which are characterized by significant resource constraints. However, as QUIC prominance increases, and the IoT continues to expand, QUIC may offer connectivity opportunities for IoT devices. In this paper, we explore the suitability of QUIC for IoT environments. Leveraging optional functionality, we propose, discuss, and evaluate a QUIC profile for IoT scenarios that is currently being considered for IETF standardization.

0.04