CS Paper Radar

Particle Selection in Virtual Reality

Boaz Keren-Gil, James Gain, Lucia Marchetti, Patrick Marais, Alexander Sivitilli

cs.HC astro-ph.IM ·submitted 2026-10-12 16:53 UTC · v1

Abstract

Point-cloud representations of 3D data are used in many fields, from astronomical surveys of galaxies to medical imaging and laser scans of buildings. A task common to all of these is interactive selection: picking out a meaningful subset of points for closer analysis. The data is inherently 3D, yet the traditional workflow uses a 2D mouse on a 2D projection and inherits the limitations of a flat screen. This paper compares Virtual Reality (VR) and desktop environments for 3D particle selection, asking whether VR's six-degree-of-freedom hand interaction yields measurable gains in accuracy, speed, usability, workload and flow. In a counterbalanced within-subjects experiment (N = 34), participants selected 90 target galaxies from a catalogue of 16,816 galaxies, using mouse-driven selection with keyboard camera control on the desktop and a hand-held spherical brush that adds or removes particles in VR. We measured task accuracy, completion time, and three standard questionnaires: the System Usability Scale (SUS), the NASA Task Load Index (NASA-TLX) and the Flow State Scale (FSS). Accuracy was comparable (91.6% VR vs. 93.1% desktop; p = 0.858), but every other measure favoured VR. Tasks were 23% faster (p = 0.001, d = 0.93), usability was higher (SUS 84.6 vs. 54.0; d = -1.78), workload was lower (NASA-TLX 20.4 vs. 34.7; d = 0.90), and flow was higher (FSS 83.2 vs. 70.2; d = -1.23). Because the underlying problem, making a 3D selection through a 2D interface, is not specific to astronomy, we expect the pattern to carry over to point-cloud selection in other fields.

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond Task Performance: Lessons Learned from Evaluating an Exploratory VR Interaction Technique

cs.HC ·2026-09-21 ·Nevzat Umut Demirseren, Corey Pittman, Isayas Berhe Adhanom, Karthikeyan Umapathy, Kevin Pfeil
similarity 0.63
Abstract · 6 pages, 10 figures

Dense virtual environments present significant challenges for object selection and manipulation, motivating the development of novel interaction techniques. This paper presents RodCast as an exploratory case study to investigate explicit trajectory visualization for interaction in dense virtual environments. We conducted a within-subjects user study comparing RodCast with Go-Go Hand and FlowerCone across three representative interaction tasks using objective performance measures, subjective evaluations, and qualitative feedback. The results revealed that the proposed implementation incurred performance costs on more demanding manipulation tasks, while qualitative feedback suggested that participants attributed these challenges to the complexity of the bimanual control scheme. Additionally, subjective evaluations and qualitative feedback identified benefits in spatial awareness and target accessibility that were not fully reflected by conventional performance measures. Together, these findings highlight the importance of control simplicity in interaction technique design and emphasize that incorporating qualitative feedback into the evaluation process is essential for distinguishing implementation limitations from the potential of the interaction concept. Collectively, these lessons provide guidance for the design and evaluation of future interaction techniques.

0.26

Selfrionette: A Fingertip Force-Input Controller for Continuous Full-Body Avatar Manipulation and Diverse Haptic Interactions

cs.HC ·2026-11-02 ·Takeru Hashimoto, Yutaro Hirao
top venuehighly cited similarity 0.60
Abstract · 14 pages, 12 figures. Author-prepared version of the UIST 2024 paper. Both authors contributed equally

We propose Selfrionette, a controller that uses fingertip force input to drive avatar movements in virtual reality (VR). This system enables users to interact with virtual objects and walk in VR using only fingertip force, overcoming physical and spatial constraints. Additionally, by fixing users' fingers, it provides users with counterforces equivalent to the applied force, allowing for diverse and wide dynamic range haptic feedback by adjusting the relationship between force input and virtual movement. To evaluate the effectiveness of the proposed method, this paper focuses on hand interaction as a first step. In User Study 1, we measured usability and embodiment during reaching tasks under Selfrionette, body tracking, and finger tracking conditions. In User Study 2, we investigated whether users could perceive haptic properties such as weight, friction, and compliance under the same conditions as User Study 1. Selfrionette was found to be comparable to body tracking in realism of haptic interaction, enabling embodied avatar experiences even in limited spatial conditions.

0.61

Exploring Avatar-Based Representations of Desktop Analytical Workflows for Asymmetric Collaborative Visual Analytics

cs.HC ·2026-09-14 ·Tiansu Chen, Yalong Yang, Wai Tong
similarity 0.59
Abstract

Collaborative visual analytics increasingly occurs across asymmetric desktop-VR settings, with desktop analysis offering precision and efficiency and VR providing spatial and embodied affordances. However, maintaining workspace awareness remains challenging because desktop collaborators are often represented in VR only through indirect cues such as perspective sharing, shared visualization state, or lightweight cursor traces, which do not convey their ongoing analytical activity in a VR-native manner. To address this gap, we present Desk2Avatar, which explores avatar-based representations of desktop analytical workflows in VR. We introduce two representation strategies, Distanced and Embodied, inspired by remote pointing and direct manipulation. We conducted a within-subject study with 18 participants comparing these strategies against a depth-adaptive cursor baseline. Our findings show that avatar-based representations improved collaborator awareness and attentional guidance over cursor cues, while excessive embodiment introduced occlusion, distraction, and additional workload. Finally, we discuss design implications for future desktop-to-VR representations, focusing on balancing collaborator presence, attentional guidance, and workspace readability.

0.24

Comparing Haptic Feedback Across Hand Tracking and Controllers in VR Object Interaction Tasks

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather, Kiyoshi Kiyokawa
published similarity 0.59
Abstract

Hand tracking offers natural VR interaction but lacks controllers' inherent tactile feedback, while haptic feedback across input methods remains understudied. We conducted a participant study comparing vibration, impulse, and no feedback in hand- and controller-based VR interaction across grasp-, pinch-, and tap-like gestures assessing performance, workload, and preference. A custom glove and controller-mounted device provided both feedback types, aiming for consistency across input modalities. Controllers were faster for grasp and pinch, whereas hand tracking was more accurate for pinch and preferred overall. Haptics had limited performance effects, although impulse reduced grasp accuracy with controllers. Participants preferred vibration and impulse over no haptic feedback, favouring vibration overall. Our findings reveal a more nuanced relationship between haptic feedback, input device, and interaction context than suggested by previous work.

0.36

Comparing Hand and Controller Avatars with Hand Tracking and Controller-Based Interaction

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather
top venuehighly cited similarity 0.57
Abstract

Previous research suggests that the congruency between common VR input devices - such as controllers or hand tracking - and their visual representations (e.g., hand or controller avatars) influences user experience and performance. However, the specific effects of input-avatar combinations remain underexplored. We study the effects of common input devices (hand tracking and controllers) and visual representations (hand and controller avatars) on performance and perceived success in target acquisition tasks. We included both grasping and pinching gestures across 16 combinations of input, avatar, and target size. Results indicate that hand tracking benefits from any form of visual representation - even when mismatched - achieving up to 5.8% greater accuracy compared to having no avatar, likely due to its reliance on visual feedback in the absence of a physical prop. Controllers were generally preferred and offered faster task completion. However, mismatched avatars had a stronger negative effect with controllers, particularly when the virtual gesture did not align with the physical action, leading to a 5.6% drop in accuracy compared to the matched condition - suggesting that inaccurate feedback can be more disruptive than having no avatar feedback at all.

0.65

GraspPressure: Understanding Pressure Input With Busy Hands

cs.HC ·2026-10-29 ·Anand Kumar, Aditya Shekhar Nittala
published similarity 0.56
Abstract · To appear in the Proceedings of the ACM on Human-Computer Interaction (PACM HCI), presented at ACM Interactive Surfaces and Spaces (ISS 2026…

In many real-world scenarios, users interact with digital systems while their hands are partially occupied, such as when holding tools or everyday objects. Prior work on busy-hand interaction has focused on microgestures and motion-based techniques, which rely on finger articulation or relative movement. In situations where a stable grasp is required, such as handling fragile, heavy, or precision objects, such motion can be undesirable or impractical. Pressure-based input offers a complementary modality that enables interaction without changing finger pose, yet its use while holding objects has received limited empirical attention. To explore this, we conducted two within-subject experiments examining users' ability to perform controlled pressure selections and analyzing finger-specific performance across different grasps and geometries. Results indicate that participants can reliably perform pressure-based selections in these conditions, achieving high success rates (92.7% on average) with low selection times (1.74s on average). Our findings characterize the potential of pressure input as a complementary microinteraction modality under grasp-constrained, busy-hand scenarios.

0.28

Beyond the Lab: Large-Scale Remote Cybersickness Research in Virtual Reality Using the VERA Platform

cs.HC ·2026-09-04 ·Matt Gottsacker, Gerd Bruder, Daniel Zielasko, Alexander Giovannelli, Ali Haskins +11 more
similarity 0.56
Abstract · This is a preprint of a publication currently under review at IEEE Transactions on Visualization and Computer Graphics (TVCG)

Cybersickness remains a major barrier for the adoption of virtual reality (VR), yet most existing knowledge is derived from laboratory-based studies with relatively small and homogeneous participant samples. In this paper, we investigate whether remote VR studies can produce cybersickness findings comparable to traditional in-lab experiments while enabling larger and more diverse participant populations. Using the Virtual Experience Research Accelerator (VERA), we deployed a remote adaptation of the standardized Cybersicker testbed for cybersickness research and collected data from N=263 participants using their own consumer VR headsets. We compared these results against a previously published in-lab dataset and a demographically matched subset of the remote sample. Across cohorts, cybersickness outcomes were consistent in direction and temporal pattern, including symptom onset trajectories, Fast Motion Sickness Scale (FMS) ratings, and Simulator Sickness Questionnaire (SSQ) responses, supporting the validity of remote cybersickness human-subjects research. Leveraging the larger remote dataset, we additionally examined demographic and individual-difference factors associated with cybersickness. These analyses confirm at scale the effects of sex, sickness susceptibility, and sickness expectation reported in smaller laboratory samples, and they add well-powered evidence on the contested relationship between age and cybersickness. These findings demonstrate that the VERA platform provides a viable means of remotely replicating laboratory-based studies and highlight its ability to support large, demographically diverse participant samples. This work establishes a validated methodological foundation for future large-scale remote studies of cybersickness and other VR research topics.

0.20

Tactile Search: Enhancing Targeting in 3D Space

cs.HC ·2026-09-05 ·Amber Maimon, Iddo Yehoshua Wald, Jonas Keppel, Eunhee Chang, Yoshifumi Kitamura +3 more
top venue similarity 0.55
Abstract · Accepted to the 2026 IEEE International Symposium on Mixed and Augmented Reality (ISMAR 2026)

Visual search is crucial in daily life, from scanning for relevant information to spotting signs of danger. When sensory channels are overloaded or degraded, cognitive tasks can be supported by crossmodal information representations through vibrotactile cues. We introduce Tactile Search, an approach that uses modulation of frequency and amplitude of vibrations to the hands, for guiding attention to the location of objects in 3D space. We evaluated this approach in a competitive VR game where participants searched for targets using both vision and touch. Across two studies -- an in-the-wild demonstration (n=55) and a controlled laboratory experiment (n=28) -- we found that vibrotactile feedback significantly improved performance and increased user confidence. In the combined haptic condition, performance did not differ across target heights. We further analyzed participants' subjective experiences and search strategies highlighting the benefits of the tactile cues. Our findings suggest that Tactile Search can enhance interaction and provide design considerations for integrating haptic search into interactive systems.

0.24