CS Paper Radar

Optimal Gating for Dead-Time-Constrained Single-Photon Detectors

Frederic J. N. Jorgensen, Steven G. Johnson

eess.SP ·submitted 2026-10-12 21:36 UTC · v1

Abstract

We develop a Fisher-information framework for optimizing single-photon detector gating in periodic experiments, in contrast to previous more empirical or heuristic gating choices. After each photon detection, such a detector is insensitive for a dead time, so that an early background detection can obscure a later signal. Gating preserves availability for informative photons by selectively deactivating the detector. In our high-pile-up simulation of distance-attenuated lidar, our practical data-independent gating design reduces the worst-case asymptotic range variance by more than half relative to the free-running acquisition (which does not use any gating). More generally, we characterize achievable detector-active frequencies as a convex polytope and construct an adaptive rule that asymptotically attains an optimal "oracle" design without prior knowledge of the physical parameters. We also derive practical criteria that quantify the potential gains of gating and/or photon attenuation over unattenuated free-running acquisition.

Comment
30 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

FirstCross: Convex Single-Photon 3D Reconstruction from Sparse Views

cs.CV eess.IV ·2026-11-19 ·Chi-Wei Lee, Cheng-Han Chiang, Yi-Chun Chang, An-Kai Chen, Po-Chih Kuo
theorycode/data similarity 0.60
Abstract · Project page: https://arthur031221.github.io/firstcross/

Single-photon lidar records the arrival time of each returning photon, enabling 3D reconstruction from few views and scarce photons. However, leading neural methods such as Transientangelo require over an hour of non-convex per-scene optimization, and their accuracy degrades as photon flux decreases. We propose FirstCross, a network-free approach that instead solves a short sequence of convex problems on a voxel grid. For a solid object, the Poisson likelihood of a ray with given signal and background rates depends on the scene solely through its first crossing, the point where the ray first enters the object. Decomposing this likelihood yields two tractable terms. The first penalizes surfaces in front of detected photons and admits a tight convex closure, namely volume rendering with a running-maximum transmittance in place of NeRF's product transmittance. The second accounts for photons that no surface explains and admits a convex upper bound once the object is assumed to be thick behind each detected surface point. Compared with Transientangelo under its own real-data protocol, FirstCross achieves lower depth error across every test scene, view count, and flux level. With three views and 100 times fewer photons than at the protocol's lowest flux, our mean object depth error stays under half of Transientangelo's with all photons. Given our detected surface points, the best classical fusion has 1.3 to 1.8 times our three-view error across flux levels. On real room-scale captures with 1% of their photons, TransientNeRF has 2.8 to 7.7 times our error. FirstCross lets few-view single-photon scanners cut exposure to 1% and reconstruct an object in about a minute on one GPU.

0.23

One Photon, Many Worlds: Posteriors and Predictions with Single-Photon Cameras

eess.IV cs.CV ·2026-10-02 ·Haejoon Lee, Mohit Gupta, Vijayakumar Bhagavatula, Aswin C. Sankaranarayanan
similarity 0.57
Abstract · 18 pages, 18 figures

Single-photon avalanche diode (SPAD) cameras operate fundamentally differently from conventional cameras due to their photon-counting nature. Each frame produces a binary image: pixels report zero if no photons arrived during exposure, and one if one or more photons arrived. Reconstructing a scene or inferring its properties from a single binary frame is difficult because many different images could produce the same measurement; thus, the inverse problem is fundamentally one-to-many. As we gather more binary measurements, the inherent uncertainty associated with the inverse problem and any associated inference diminishes. With sufficient photon counts, photon noise becomes negligible relative to the signal mean, enabling near-deterministic scene recovery and inference. This work characterizes the transition from stochastic to near-deterministic scene understanding as photon budget increases, analyzing how the stochasticity in photon arrival affects downstream inference tasks. Technically, we develop a conditional generative framework based on a Hypergeometric frame-thinning process for accumulated binary SPAD measurements. Generative models capture the one-to-many nature of photon-starved inverse problems, enabling empirical characterization of how this ambiguity diminishes with increasing measurements and its impact on downstream tasks like character recognition, QR code decoding, and facial analysis.

0.20

CARE: Camera-Residual Reserves for First Sightings in Adaptive LiDAR Sensing

cs.CV cs.RO ·2026-08-25 ·Jiachen Gong, Yun Li, Ehsan Javanmardi, Wencan Mao, Manabu Tsukada
similarity 0.55
Abstract

Adaptive LiDAR scanning concentrates a limited sensing budget on regions of interest predicted from past object tracks, lowering data volume in autonomous driving while maintaining detection accuracy. However, existing scanning policies face three challenges. First, history-driven approaches depend on past tracks, so unseen objects are detected late or missed. Second, random or uniform sampling outside the predicted regions has no awareness of where new objects appear. Third, camera-guided alternatives spend budget on all camera detections, resampling objects already covered, costing recall in crowded scenes and range when budgets are scarce. This paper introduces the CAmera-REsidual reserve (CARE), a training-free allocation rule that reserves part of a fixed ray budget for the directions of current camera detections that the track forecasts cannot explain; the rest follows the base history policy, and unused reserve returns to a random floor. The paper makes three contributions. First, a leakage-free ray-budget evaluation on nuScenes (150 scenes, 4,148 events) measuring the first-sighting loss of history-driven scanning, with a strict-causal variant using the preceding keyframe. Second, CARE raises first-sighting recall by 5.2, 5.2, and 4.3 points at 10%, 20%, and 35% budgets over the history policy, with paired intervals excluding zero; the camera cue drives this gain, and the first-sighting versus overall trade-off is a budget-dependent Pareto choice. Third, a safety-bounded forgetting module that releases budget from receding or static tracks beyond a speed-dependent guard distance; at tight budgets, forgetting without the guard significantly harms near-field recall, so the guard is what keeps it safe. The pipeline runs end to end on a real vehicle and, in closed-loop simulation, detects an occluded pedestrian earlier and brakes more reliably than history-driven scanning.

0.20

Quanta Perception as Probabilistic Events

cs.CV cs.AI ·2026-08-27 ·Varun Sundar, Pavan Thodima, Sacha Jungerman, Mohit Gupta
similarity 0.55
Abstract · For project webpage, see https://wisionlab.com/project/probabilistic-events/

Autonomous systems rely on extracting information from light, yet remain brittle in extreme environments, from nighttime navigation to high-speed robotics. Conventional sensors aggregate photons over fixed exposures, imposing trade-offs between sensitivity, dynamic range, and temporal resolution that degrade perception when photons are scarce or dynamics are rapid. Quanta sensors detect individual photons, but their streams exceed real-time compute and latency budgets by orders of magnitude. Here we introduce $\textit{probabilistic events}$, a computational primitive for real-time quanta perception from individual photon detections. By computing the posterior over the time since the last intensity change, we represent photon streams as recursive belief states. Rather than fixed-threshold event-camera triggers, this recursive Bayesian formulation yields three low-latency signals: motion-adaptive scene flux, high-fidelity activity maps, and entropy-based perceptual uncertainty. This representation enables perception in extreme conditions, including pose estimation of a running person at $\sim$0.05 lux---without retraining vision models. Our approach processes input streams exceeding 50{,}000 quanta frames per second on commodity GPU hardware---yielding kilohertz-scale outputs up to four orders of magnitude faster than state-of-the-art quanta reconstruction baselines, even for megapixel arrays. By replacing frame reconstruction with direct probabilistic inference over photon streams, this work bridges photon-counting quanta sensing with robotic vision.

0.32

Resolving Mixed Single-Photon LiDAR Returns for Foreground-View and Hidden Scene Reconstruction

cs.CV ·2026-10-01 ·Ziting Wen, Runrong Deng, Zili Zhang, Haitao Zheng, Yuecong Xu +3 more
similarity 0.54
Abstract

Partially transmissive screens and protective covers are common in robotic inspection, but they create mixed LiDAR returns from both the foreground material and the scene behind it. Conventional peak-based LiDAR usually discards weak hidden returns, while single-photon LiDAR records time-resolved histograms that preserve attenuated and overlapping echoes. However, existing transient reconstruction methods typically fit a single scene representation to the measured waveform. Under occlusion, weak or nearby foreground--hidden echoes can form a broad peak or subtle shoulder. Because such waveforms can also be explained by a displaced single surface or a thick density distribution, accurate transient fitting does not necessarily imply correct geometry. We propose a state-aware framework for foreground-view and hidden scene reconstruction from occluded single-photon histograms. For each ray, we estimate local echo evidence, identifying no reliable surface evidence, single-return evidence, or two returns. The inferred echo state routes supervision for a two-head neural field: all rays constrain waveform reconstruction, while reliable anchors provide geometry localization. We also introduce a real paired single-photon LiDAR occlusion dataset with occluded and clean captures at fixed poses. Experiments on a real dataset show improved hidden scene depth and point-cloud accuracy over baselines. Our results demonstrate single-photon layered reconstruction as a practical route for 3D perception through partially transmissive occluders.

0.23

FAST: Functional Adaptive Sensing and Testing for Quickest Change Detection

cs.IT stat.ME ·2026-11-17 ·Peiyao Liu, Jie Guo, Zhijun Wang, Xueru Zhang, Nan Chen
theory similarity 0.53
Abstract

Quickest change detection (QCD) is studied for partially observed functional data streams. At each sampling epoch, a function is realized over a continuous domain, but its values can be observed at only a fixed number of locations. At an unknown change point, the functional mean undergoes a shift that is assumed to admit a sparse representation in a localized basis. We propose Functional Adaptive Sensing and Testing (FAST), which jointly estimates the unknown post-change parameter, selects sensing locations, and performs sequential detection. A minimax lower bound on the worst-case detection delay is derived under an average-run-length constraint. A non-asymptotic estimation-error bound is established for the policy-dependent observations induced by adaptive sensing. Under the stated regularity conditions, FAST is first-order asymptotically optimal when sensing subsets are optimized exactly. Simulations and a wildfire case study demonstrate the performance of the proposed procedure.

0.37

Simulation-Driven Approach for Occlusion-Based Non-Line-Of-Sight Detection Using a Low-Cost Flash LiDAR

eess.IV ·2026-11-02 ·Peizhao Qiu, Emmanuel A Olowe, Zhenya Zang, Istvan Gyongy, Danial Chitnis
hot direction similarity 0.53
Abstract

Non-line-of-sight (NLOS) imaging aims to sense objects outside the direct line of sight. While most previous work focuses on the canonical around-the-corner configuration, this work considers a more challenging occlusion-based NLOS setting in which targets are hidden by scene geometry. To avoid the challenge of collecting large real-world datasets, we have developed a photon-based Monte Carlo simulator to generate diverse synthetic training data and validate against experimental data. We trained an AI model to identify multi-bounce photon patterns associated with hidden targets. The model achieves an Average Precision (AP) of 0.91 on synthetic test data and, when transferred directly to 180 real measurements acquired with a TMF8829 SPAD flash LiDAR, achieves 86.67% accuracy and an AP of 0.95. These results show that simulated transient data can support hidden-target detection with a low-cost commercial sensor and provide an initial step toward more general occlusion-based NLOS sensing and, ultimately, hidden-scene reconstruction.

0.29

Optical ISAC with Single-Photon Avalanche Diode (SPAD) Arrays

eess.SP ·2026-10-19 ·Vasilis K. Papanikolaou, Dimitris Bozanis, Ferdaous Tarhouni, George K. Karagiannidis, Christos Masouros +1 more
similarity 0.53
Abstract · 5 pages, 4 figures, conference

Single-photon avalanche diode (SPAD) arrays offer photon-level sensitivity for sensing in optical integrated sensing and communication (O-ISAC). However, after each detection, a SPAD is blind for a dead time, which saturates the array at high received power. Existing O-ISAC analyses assume linear receivers and do not capture this effect. In this paper, we study ranging with a SPAD array in a monostatic O-ISAC system based on direct-current-biased optical orthogonal frequency-division multiplexing (DCO-OFDM). Sampling the array once per dead time, we model the number of pixels that detect a photon in each sampling interval as a binomial random variable whose success probability accounts for the intensity variation of the echo within a dead time. Based on this model, we derive the Cramér-Rao bound (CRB) for range estimation. We show that the SPAD count model of optical wireless communication, which assumes a constant photon rate over a dead time, causes a range bias that depends on the received power. Moreover, unlike for a linear photodiode, saturation degrades the ranging accuracy beyond a sensing-optimal transmit power. The rate-constrained operating point is then the larger of this power and the power needed for the target data rate. Numerical results validate the analysis against a continuous-time photon-counting simulation and show that the proposed model is needed for ranging.

0.24