CS Paper Radar

Resolving Mixed Single-Photon LiDAR Returns for Foreground-View and Hidden Scene Reconstruction

Ziting Wen, Runrong Deng, Zili Zhang, Haitao Zheng, Yuecong Xu, Xiaoqiang Ren, Guodong Shi, Kemi Ding

cs.CV ·submitted 2026-10-01 07:15 UTC · v1

Abstract

Partially transmissive screens and protective covers are common in robotic inspection, but they create mixed LiDAR returns from both the foreground material and the scene behind it. Conventional peak-based LiDAR usually discards weak hidden returns, while single-photon LiDAR records time-resolved histograms that preserve attenuated and overlapping echoes. However, existing transient reconstruction methods typically fit a single scene representation to the measured waveform. Under occlusion, weak or nearby foreground--hidden echoes can form a broad peak or subtle shoulder. Because such waveforms can also be explained by a displaced single surface or a thick density distribution, accurate transient fitting does not necessarily imply correct geometry. We propose a state-aware framework for foreground-view and hidden scene reconstruction from occluded single-photon histograms. For each ray, we estimate local echo evidence, identifying no reliable surface evidence, single-return evidence, or two returns. The inferred echo state routes supervision for a two-head neural field: all rays constrain waveform reconstruction, while reliable anchors provide geometry localization. We also introduce a real paired single-photon LiDAR occlusion dataset with occluded and clean captures at fixed poses. Experiments on a real dataset show improved hidden scene depth and point-cloud accuracy over baselines. Our results demonstrate single-photon layered reconstruction as a practical route for 3D perception through partially transmissive occluders.

Closest papers

Nearest neighbours by meaning across the whole index.

Simulation-Driven Approach for Occlusion-Based Non-Line-Of-Sight Detection Using a Low-Cost Flash LiDAR

eess.IV ·2026-11-02 ·Peizhao Qiu, Emmanuel A Olowe, Zhenya Zang, Istvan Gyongy, Danial Chitnis
hot direction similarity 0.69
Abstract

Non-line-of-sight (NLOS) imaging aims to sense objects outside the direct line of sight. While most previous work focuses on the canonical around-the-corner configuration, this work considers a more challenging occlusion-based NLOS setting in which targets are hidden by scene geometry. To avoid the challenge of collecting large real-world datasets, we have developed a photon-based Monte Carlo simulator to generate diverse synthetic training data and validate against experimental data. We trained an AI model to identify multi-bounce photon patterns associated with hidden targets. The model achieves an Average Precision (AP) of 0.91 on synthetic test data and, when transferred directly to 180 real measurements acquired with a TMF8829 SPAD flash LiDAR, achieves 86.67% accuracy and an AP of 0.95. These results show that simulated transient data can support hidden-target detection with a low-cost commercial sensor and provide an initial step toward more general occlusion-based NLOS sensing and, ultimately, hidden-scene reconstruction.

0.29

Towards Real-Time Full-Waveform LiDAR Transformers via Intensity-Guided Token Reduction and Physics-Aware Augmentation

cs.CV ·2026-11-05 ·Kotaro Oishi, Kazuma Ikeda, Ryosei Hara, Ryo Yoshida, Mariko Isogawa +1 more
top venuebenchmarkcode/datahot direction similarity 0.65
Abstract · Accepted to NeurIPS 2026 (Main)

LiDAR is a critical sensor for autonomous driving and robotics, yet it remains vulnerable to adverse conditions such as fog, rain, transparent objects, and low-reflectance surfaces. Full-waveform LiDAR (FWL) addresses these limitations by capturing the complete return waveform as a histogram, preserving rich reflection characteristics including multi-path echoes and weak signals. While recent Transformer-based approaches have demonstrated promise on FWL data, two fundamental bottlenecks remain: high computational cost from redundant tokens in low-intensity background regions, and limited generalization due to scarce annotated training data. We address both bottlenecks by exploiting the physical structure inherent to FWL data. First, we propose FWL-ToPM, a token pruning and merging mechanism that leverages intensity distributions to selectively reduce tokens while retaining critical waveform content. Second, we introduce FWLAug, a data augmentation framework designed as a regularization method that preserves waveform structure, retaining the Time-of-Flight waveform of each ray and the frustum geometry, to improve generalization to unseen scenes. Evaluated on the Ghost-FWL benchmark, FWL-ToPM achieves over 8 times speedup at real-time throughput alongside a nearly 9-point F1 gain over the prior state of the art, establishing the first real-time FWL Transformer that simultaneously improves accuracy. FWLAug further improves performance on both the standard benchmark and an out-of-distribution test set of unseen scenes. Together, these methods push FWL-based perception toward practical deployment. The code and the OOD dataset are publicly available and can be accessed via the project page: https://keio-csg.github.io/FWL-ToPM

0.88

RLG-TPV: Radar- and LiDAR-Guided Tri-Perspective View Fusion for Camera-Radar 3D Object Detection

cs.CV ·2026-08-29 ·Ahmet Mete Dokgoz, A. Enes Doruk, Hasan F. Ates
similarity 0.63
Abstract

Tri-Perspective View (TPV) representations describe 3D scene structure through top, side, and front feature planes, but existing TPV lifting is primarily camera-based, leaving the depth of sampled image evidence ambiguous along projected camera rays. We propose RLG-TPV, a multimodal TPV framework for camera-radar 3D object detection in which radar and training-time LiDAR provide complementary geometric guidance during representation construction. A ray-guided deformable-attention lift weights sampled image features using LiDAR-supervised camera depth probabilities and radar frustum occupancy, while radar additionally refines the depth distribution before lifting. Because conventional radar provides limited elevation information, LiDAR-derived class-occupancy targets supervise the side and front planes during training; the corresponding heads are removed at inference, so deployment requires only cameras and radar. For temporal aggregation, Doppler-guided temporal fusion aligns past features using a motion field anchored by measured radar radial velocity, with gating that limits warping in regions without supported motion. An RCS-aware radar scatter further allows radar evidence to spread over spatial neighborhoods conditioned on radar cross section. On the nuScenes validation set, RLG-TPV achieves 0.4981 mAP and 0.5959 NDS, reducing orientation and velocity error by 31.9\% and 30.7\% relative to the published CRN baseline. Ablation studies show that ray-level geometric guidance is a major contributor to the final performance.

0.09

GlassFormer: Learning Real-time Glass Segmentation using Radar-Depth Fusion

cs.CV cs.RO ·2026-09-29 ·Suhani Grover, Astik Srivastava, Viswas Dinesh, Avinash Sharma, K. Madhava Krishna
publishedcode/data similarity 0.63
Abstract · Accepted for presentation at IEEE IROS 2026. Code available at https://github.com/Suhani92/GlassFormer

Transparent surfaces are ubiquitous in built environments, yet they remain a persistent failure case for robotic perception. RGB cameras perceive the background behind glass rather than the surface itself, while depth sensors such as LiDAR, time-of-flight, and RGB-D often return invalid or background measurements in transparent regions. As a result, systems that rely solely on optical sensing may misinterpret glass walls, doors, or mirrors as free space, compromising safe and reliable navigation. Existing glass segmentation approaches address this by learning visual cues such as reflections, boundaries, and semantic context from RGB images. While effective under favourable lighting and viewing conditions, these cues degrade in low-light environments, under glare, or when glass surfaces are featureless or partially occluded. In this work, we propose a multimodal framework that fuses millimetre-wave radar with RGB-D sensing for real-time transparent surface segmentation. Radar reflects strongly off glass surfaces, providing a geometric cue that remains reliable precisely where vision and depth fail. We exploit this cross-modal inconsistency to generate a radar-guided spatial prior, which is integrated into a lightweight transformer-based segmentation network, GlassFormer, via cross-modal attention. We report results on a mixed-condition test split covering all scene types and a dedicated low-light split designed to stress vision-only methods. GlassFormer achieves 0.88 mIoU on the mixed split, and 0.59 mIoU on the low light split, demonstrating substantial robustness gains over vision-only baselines while maintaining real-time performance on resource-constrained platforms.

0.46

D2ToF: One-Step Diffusion for Depth Super-Resolution from Lightweight Single-Photon LiDAR Waveforms

eess.IV cs.CV ·2026-11-13 ·Pallabjyoti Deka, Lewis Wilson, Stephen McLaughlin, Jonathan Leach, Abderrahim Halimi
similarity 0.62
Abstract

Single-photon LiDAR (SPL) sensors offer exceptional temporal resolution and single-photon sensitivity for depth imaging. However, cost-effective SPL arrays typically suffer from extremely low spatial resolutions (e.g. $8\times 8$ pixels), limiting their real-world utility. In this paper, we propose a novel, one-step super-resolution framework, D2ToF, Distilled Diffusion for Time-of-Flight, that bridges the gap between high-fidelity generative modeling and real-time execution. Our approach uses an amortized variational distillation strategy that allows for a measurement-based data consistency term to be incorporated directly into the one-step training objective. This encourages that the synthesized high-resolution depth maps are consistent with the captured low-resolution Time-of-Flight (ToF) histograms. To overcome the severe ill-posedness of upsampling extremely degraded inputs, we introduce a multimodal guidance strategy. By leveraging a foundational monocular depth model to extract structural priors from a high-resolution reflectivity image, our network is guided by a rich triad of the ToF histogram, reflectivity map, and relative depth estimate. Experimental results outperform evaluated baselines, achieving $16\times$ spatial super-resolution (from $8\times 8 \times 100$ histograms to $128\times 128$ depth maps) at an accelerated inference speed of approximately $83$ milliseconds.

0.18

Extrapolation Matters: Sparse-Only Depth Completion Beyond LiDAR Coverage

cs.CV ·2026-11-05 ·Maximilian Jansen, Gasser Elazab, Praveen Kulkarni
hot direction similarity 0.62
Abstract

Extrapolation beyond LiDAR coverage is an important yet under-evaluated challenge of depth completion. In real camera--LiDAR systems, partial sensor overlap, occlusions, and limited field coverage often leave large image regions weakly observed or completely unobserved by LiDAR. Thus, we investigate depth completion in this beyond-coverage regime using only sparse supervision from raw single-sweep LiDAR, without dense depth labels, LiDAR accumulation, or pseudo-LiDAR generation. Our approach leverages a frozen monocular depth foundation model, lightweight per-frame alignment to sparse LiDAR geometry, and a refinement module that fuses the aligned prior with sparse LiDAR anchors to predict dense metric depth. To regularize learning under raw sparse supervision, we introduce a high-frequency normal-consistency loss defined as the image-space gradient of the per-pixel normal cosine discrepancy. This term penalizes spatial variation in scalar angular error; it does not directly match changes in neighboring normal vectors. We further introduce an evaluation protocol that explicitly separates LiDAR-supported and beyond-coverage regions, revealing extrapolative behavior that conventional depth-completion metrics can obscure. Our method achieves strong depth accuracy beyond LiDAR coverage while remaining competitive in LiDAR-covered regions, providing a practical way to deploy monocular foundation priors in multi-sensor systems.

0.18

CalibSwitch: Observation-Driven Camera-LiDAR Extrinsic Recovery and Selective Maintenance for Multimodal Perception

cs.RO cs.CV ·2026-10-30 ·Haifa Zhang, Yijing Wang, Zhiqiang Zuo
similarity 0.61
Abstract

Camera--LiDAR perception on mobile robots and intelligent vehicles depends on reliable sensor geometry throughout deployment. Installation variations create uncertainty in the initial extrinsics, while changing observation quality makes frame-wise estimates fluctuate during operation. This paper presents CalibSwitch, an observation-driven framework that separates absolute extrinsic recovery from selective state maintenance. A cross-modal absolute extrinsic generator (CAEG) combines projection-free bidirectional feature interaction with geometry-regularized learning to recover complete SE(3) candidates from image--point observations and coarse view context, without a supplied numerical initial transform. A selective recurrent calibration policy (SRCP) combines observation quality and temporal history to determine when a candidate should replace the working geometry consumed by a frozen multimodal detector. On nuScenes, CAEG achieves mean translation and rotation errors of 0.248 m and 5.884$^\circ$. Under sustained geometric transitions, SRCP reaches a mean composite error of 1.46 with 9.70\% candidate commitments, outperforming quality-based and temporal-consistency gating at comparable commitment rates. Relative to unconditional per-frame updating, it improves frozen-detector mAP and NDS by 1.43 and 0.92 points. Paired geometry--observation uncertainty tests, two real-vehicle platforms, and 13.5-FPS single-camera Jetson execution demonstrate the system value of selective geometric-state maintenance for continuous perception.

0.16

RAPA: Ray-Aware Physics Augmentation for Robust Camera-LiDAR Calibration

cs.CV ·2026-11-09 ·Kyung-Rin Oh, Ji-Hoon Kim, TaeJoon Ha, Jae-Sang Hyun
similarity 0.61
Abstract

Camera-LiDAR calibration is essential for reliable perception in robotic and autonomous systems. Most target-based calibration methods rely on checkerboard observations, but accurate checkerboard feature extraction from LiDAR point clouds remains challenging due to measurement sparsity. Existing approaches either require manual annotation of 3D corners or depend on geometric feature extraction methods, both of which can become unreliable when checkerboard features are insufficiently observed. In this paper, we formulate checkerboard localization as a 2D detection problem using cylindrical LiDAR reflectivity images. To overcome the limited availability of labeled training data, we propose ray-aware physics augmentation (RAPA), which generates diverse synthetic samples from a single checkerboard observation. The generated data are used to improve detector robustness and generalization under varying sensing conditions. Across four independently captured indoor and outdoor locations, the proposed synthetic augmentation exceeds the strongest evaluated image-space augmentation baseline by 16.1-43.1 percentage points in mAP@0.5. Compared with training-free target-based methods on 242 observations, RAPA yields the largest number of valid target localizations, with 96.4% of its returned detections yielding valid target poses. These reliable localizations support downstream camera-LiDAR calibration across all four evaluated locations. Overall, RAPA addresses a key bottleneck in target-based calibration by enabling automated LiDAR-side target localization with only a single annotated target observation.

0.21