CS Paper Radar

CalibSwitch: Observation-Driven Camera-LiDAR Extrinsic Recovery and Selective Maintenance for Multimodal Perception

Haifa Zhang, Yijing Wang, Zhiqiang Zuo

cs.RO cs.CV ·submitted 2026-10-30 07:14 UTC · v1

Abstract

Camera--LiDAR perception on mobile robots and intelligent vehicles depends on reliable sensor geometry throughout deployment. Installation variations create uncertainty in the initial extrinsics, while changing observation quality makes frame-wise estimates fluctuate during operation. This paper presents CalibSwitch, an observation-driven framework that separates absolute extrinsic recovery from selective state maintenance. A cross-modal absolute extrinsic generator (CAEG) combines projection-free bidirectional feature interaction with geometry-regularized learning to recover complete SE(3) candidates from image--point observations and coarse view context, without a supplied numerical initial transform. A selective recurrent calibration policy (SRCP) combines observation quality and temporal history to determine when a candidate should replace the working geometry consumed by a frozen multimodal detector. On nuScenes, CAEG achieves mean translation and rotation errors of 0.248 m and 5.884$^\circ$. Under sustained geometric transitions, SRCP reaches a mean composite error of 1.46 with 9.70\% candidate commitments, outperforming quality-based and temporal-consistency gating at comparable commitment rates. Relative to unconditional per-frame updating, it improves frozen-detector mAP and NDS by 1.43 and 0.92 points. Paired geometry--observation uncertainty tests, two real-vehicle platforms, and 13.5-FPS single-camera Jetson execution demonstrate the system value of selective geometric-state maintenance for continuous perception.

Closest papers

Nearest neighbours by meaning across the whole index.

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.72
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.72
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35

VeriCalib: Verifiable Target-Based LiDAR-Camera Calibration

cs.RO ·2026-10-20 ·Xiangcheng Hu, Xieyuanli Chen, Feiyi Chen, Shengli Ren, Shiyang Chen +6 more
similarity 0.70
Abstract · 35 pages, 20 figures, 13 tables

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...

0.22

Generalizable Target-Less Joint Intrinsic-Extrinsic Camera-LiDAR Calibration using Deep Pixel-Point Correspondences

cs.RO ·2026-10-27 ·Simon Bultmann, Daniele Cattaneo, Abhinav Valada
similarity 0.70
Abstract · 8 pages, 5 figures

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw images and LiDAR scans. Our method generalizes deep correspondence-based calibration from rectified images to raw cameras through intrinsic- and distortion-aware correspondence learning via synthetic augmentations. During calibration, we iteratively couple correspondence prediction and nonlinear optimization to jointly refine the camera parameters and relative sensor transformation. We evaluate our approach on an unseen camera-LiDAR configuration from the KITTI dataset and on three real robotic platforms in a zero-shot manner. The results demonstrate that joint calibration with our generalized pixel-point correspondence network improves extrinsic accuracy over correspondence-based methods using pre-calibrated cameras, while additionally recovering accurate intrinsics.

0.20

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.69
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

MM-BEV: Enhancing Timeliness by Computing Where and When it Matters

cs.RO cs.CVcs.DCeess.SY ·2026-08-15 ·Liangkai Liu, Kang G. Shin
similarity 0.68
Abstract · 12 pages, 20 figures

Multimodal bird's-eye-view (BEV) perception combines LiDAR depth accuracy with dense camera semantics, but its high computational cost and imperfect sensing conditions make real-time deployment challenging. Existing methods largely compress individual detectors and overlook three opportunities: structured sparsity within camera and LiDAR inputs, timing misalignment between modalities, and the fact that many detected objects do not affect the planner's immediate action. We present MM-BEV, a real-time multimodal BEV system guided by a simple principle: compute where and when it matters. MM-BEV divides perception into mandatory work for safety-critical objects within braking distance of the ego vehicle and with short time-to-collision (TTC), and optional work for less urgent regions. It prioritizes mandatory work and reduces or sheds optional work under tight compute budgets. MM-BEV integrates four mechanisms: (1) a criticality-ranked temporal ROI selector based on motion-extrapolated detections from prior frames; (2) sparse, ROI-aware feature extraction using shared-shape camera crops at context-adaptive resolution and ROI-aware LiDAR voxelization; (3) a latency-aware coordinator that adapts LiDAR sweeps, image resolution, and keyframes according to scene dynamics and TTC; and (4) an asynchronous scheduler that decouples sensing from inference and skips stale frames. On nuScenes, MM-BEV reduces inference latency by 1.96x and end-to-end latency by 2.93x, with no loss in geometry-critical recall and only a 0.2 percentage-point drop in safety-critical recall. On a Clearpath Husky A300 equipped with an Ouster-128 LiDAR, BEV cameras, and a Jetson AGX Orin, MM-BEV further reduces mean latency by 2.11x, demonstrating its potential for real-world autonomous systems.

0.40

Into the LidarVerse: A Real-Time Unified LiDAR World Model Across Tasks and Sensors

cs.CV cs.RO ·2026-10-13 ·Henry Che, Xuanchi Ren, Sanja Fidler, Shenlong Wang, Laura Leal-Taixé +1 more
code/data similarity 0.68
Abstract · 31 pages, 17 figures. Project page: https://research.nvidia.com/labs/sil/projects/lidarverse

We present LidarVerse, a real-time unified LiDAR world model for sensor simulation across tasks and sensors. Existing LiDAR simulators largely follow one of two complementary paradigms: reconstruction-based methods preserve the geometry of a captured scene but require lengthy per-scene optimization, whereas generative methods amortize learning across data but lack the consistency needed for long-horizon rollouts. LidarVerse brings both paradigms into a single, unified conditional generative framework. A universal tokenizer maps LiDAR range sequences into a shared latent space, where a bidirectional teacher learns a common interface for conditioning on a LiDAR prefix, an HD-Map, a persistent spatial cache, and optionally, text. Varying the available scene evidence turns the same model into a generator of new worlds, a point-cloud forecaster, or a generalizable resimulator of observed scenes without per-scene optimization. We distill the teacher into a four-step autoregressive causal student and maintain both a rolling temporal K/V cache and a world-aligned spatial cache, enabling persistent long-horizon rollouts with real-time inference at 11 FPS on a single H100 GPU. LidarVerse achieves state-of-the-art performance on most reported metrics across all three evaluation protocols, while its tokenizer supports 32-, 64-, and 128-beam LiDAR and generalizes to an unseen scanning pattern. These results demonstrate that generative and reconstruction-grounded LiDAR simulation can be realized within one model, providing the core capabilities for future closed-loop sensor simulation.

0.28

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.67
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38