CS Paper Radar

PACT: Posture-Aligned Co-Design Technique for Hand Configuration and Retargeting in Multi-Finger Imitation Learning

Koyo Sasazaki, Satoshi Funabashi, Pranav Ponnivalavan, Alexander Schmitz, Tetsuya Ogata, Shigeki Sugano

cs.RO ·submitted 2026-10-13 14:16 UTC · v1
code/data

Abstract

The fidelity of teleoperated demonstrations used for imitation learning is determined by how faithfully a robot hand can replicate the operator's posture. The posture retargeting law that the robot will execute is typically selected only once the hardware has been finalized, and conventional hand designs often neglect human-like grasping postures. We introduce PACT, an optimization based on human grasping postures that jointly optimizes the mechanical parameters of a 17-servo robot hand (link lengths, joint offsets, mounting angles, and base placements) and its nonlinear posture retargeter (a linear human-to-robot joint map, per-joint posture-IK weights, and damping). The optimization enforces full-finger correspondence (MCP, PIP, DIP, and tip of each finger) to human poses from the DexYCB dataset, and is constrained by servo interference, assembly clearances, and flat-hand protrusion, so the resulting design can be physically assembled. We fabricate the PACT Hand and validate it through teleoperation experiments and an imitation-learning demonstration. The hand reproduces all human hand keypoints with a kinematic RMSE of 3.9 mm, compared to 12.8 mm for the LEAP Hand baseline, and keeps all fingertips within 10 mm on every grasping posture, while the baseline achieves this for only 21.6% of the poses. Under matched per-joint torque limits, it lifts twice the baseline payload, 2 kg against 1 kg, and deforms a held paper cup seven times less, reaching a deformation level comparable to a human hand. It also achieves an 86% grasping success rate on YCB daily objects, compared to 64% for the baseline. Finally, as a demonstration, an imitation-learning policy trained on demonstrations collected with the PACT Hand achieved a 75% success rate at held-out placements in a can pick-and-place task. Project page: https://pact-hand-2027.github.io

Comment
9 pages, 6 figures, 2 tables. Submitted to IEEE ICRA 2027. Project page: https://pact-hand-2027.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.74
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

Dexterous Robot Manipulation from Human Demonstrations via Contact-Anchored Retargeting and Residual Policy Learning

cs.RO ·2026-09-21 ·Zihao Yang, Chengyuan Liu, Yu Zhou, Runze Lv, Tianyu Cui +4 more
code/datahighly cited similarity 0.73
Abstract · 16 pages, 6 figures, 5 tables. Technical report. Code: https://github.com/DexGEM-Lab/real2sim2real

Learning dexterous manipulation from demonstrations is bottlenecked by data: the contact forces that determine whether a grasp succeeds are absent from every scalable source of human demonstrations. This paper builds on two observations. First, what survives the change from a human hand to a robot hand is the contact structure of a demonstration - which finger regions touch which object locations, and in what order - rather than its joint motion. Second, physical consistency need not be engineered per task: a single residual reinforcement learning (RL) policy, trained once across diverse demonstrations, can repair kinematic recordings into physically consistent, contact-annotated trajectories, and the same residual formulation restores dynamic feasibility after retargeting. These observations yield a three-stage pipeline that converts human motion-capture recordings into dexterous robot policies with no real-robot training data: physics refinement with a simulated MANO hand recovers contacts and forces, contact-anchored retargeting transfers the demonstrated contact structure through an objective independent of hand morphology, and residual policy learning adapts the result to robot actuation. The pipeline reconstructs 25,454 single-hand trajectories (success 7.3% -> 59.3%) and 25 dual-hand tasks (16.0% -> 62.4%) with one shared policy per setting, transfers one human dataset to four morphologically distinct robot hands (+62.4 pp), and executes four contact-rich bimanual tasks on physical hardware with zero real-robot training data.

0.60

Kinematic-Tactile Aligned Dexterous Retargeting with Contact Wrench Space Alignment

cs.RO ·2026-10-29 ·Xinyuan He, Ziheng Xu, Yueyuan Chen, Yufan Ye, Yuanshuo Tan +4 more
similarity 0.72
Abstract · 8 pages

Human demonstrations provide a natural and scalable source of data for learning dexterous manipulation policies. However, existing retargeting methods primarily transfer human kinematics, while the tactile information underlying physical interaction is rarely preserved across embodiments. To address this limitation, we present a hierarchical three-stage framework for kinematic-tactile aligned dexterous retargeting. We use object-centric contact wrench space as a physical representation for tactile alignment between human and robot hands. The framework first aligns hand kinematics and contact geometry, and then constructs a human wrench support profile from tactile forces and contact geometry. Robot fingertip force targets are subsequently optimized to cover the human wrench support and converted into joint position corrections, yielding directly replayable robot hand trajectories. We evaluate the framework in simulation and real robot experiments across three pouring conditions. In the real robot experiments, our method achieves a 96.7\% replay success rate and higher wrench transfer fidelity than representative retargeting baselines. The framework enables physically grounded transfer of kinematic and tactile information from human demonstrations to robot hands, providing a path toward scalable learning of contact-rich dexterous manipulation.

0.14

Morphometric Imitation: From Morphology and Contact Aware Hand Retargeting to Sim-to-Real Visuomotor Policy

cs.RO ·2026-09-23 ·Tara Sadjadpour, Siming He, C. K. Wolfe, Haozhi Qi, Lea Wilken +3 more
code/data similarity 0.72
Abstract · 24 pages, 10 figures

Human hand-object interactions (HOIs) provide a rich source of demonstrations for dexterous manipulation, but learning directly from them presents challenges in bridging morphology gaps, ensuring dynamical feasibility, and sim-to-real deployment. We present Morphometric Imitation, a three-stage framework that transforms reconstructed HOIs into zero-shot sim-to-real visuomotor policies. First, morphometric optimization (MMO) kinematically retargets human motion across hand morphologies while preserving demonstrated contacts. Second, residual reinforcement learning (RL) refines the kinematic reference using object pose and contact information from the human motion to produce dynamically feasible robot demonstrations. Third, these demonstrations are distilled into visuomotor policies. Across three robot hands and ten HOIs, MMO outperforms five baselines in contact F1, improving on the strongest ones by 8 to 28 points, while improving the success rate of downstream dynamic retargeting by as much as 35 points. On a Sharpa hand, the visuomotor policies achieve 89.3% zero-shot success in 300 real-world trials on 30 objects spanning 10 categories. Project page: https://morphometricimitation.github.io

0.55

From Teleoperation to Long-Horizon Dexterity: Evaluating Visuomotor Skills and Offline Proxies for Dexterous Manipulation

cs.RO cs.AIcs.LGeess.SY ·2026-10-29 ·Ammar N. Abbas, Aayush Jain, Prashanth Viswanath, Nivesh Gadipudi, Giulia Vilone +1 more
similarity 0.72
Abstract · Accepted at CoRL 2026 Workshop

Imitation learning policies are intended to make robotic manipulation robust to variations in object pose, appearance, and environment that challenge pre-programmed motion. However, real-world performance remains difficult to predict, as conventional optimization signals such as validation loss show no consistent relationship with robot success. To identify the design choices that govern real-world performance, 281 imitation-learning policies spanning seven policy families were evaluated in approximately 1,700 real-robot trials of RJ45 connector grasping and insertion using a five-fingered robotic hand. Controlled ablations showed that observation and action representations dominated conventional optimizer and sampling choices. For point-cloud policies, region-of-interest cropping, representation in the robot-base frame, and normalization within the point encoder each improved success by 70-100 percentage points. For the vision-language-action policy, absolute rather than relative action prediction improved insertion success by up to 70 percentage points. Skill decomposition, multi-view perception, and recovery demonstrations were associated with the strongest-performing systems, although their effects were not independently isolated. Of 67 offline metrics evaluated, only five measures of predicted-motion smoothness and directness reliably correlated with insertion success (r = -0.70 to -0.80), and only within a single policy family. These results identify representation choices as key determinants of real-world imitation-learning performance and show that offline metrics can shortlist policies, but cannot replace real-robot evaluation.

0.18

Contact Imitation Interface: Transferring Dexterous Skills by Showing How Contact Unfolds

cs.RO ·2026-10-29 ·Zhixuan Xu, Yichen Li, Bingchen Wu, Rui Wang, Yiwen Hou +3 more
similarity 0.71
Abstract · 15 pages (8-page main paper and 7-page supplementary material). Project website with code and hardware designs: https://nus-lins-lab.github.…

Robot-free human demonstrations offer a promising route to scaling dexterous manipulation data. The key challenge is to preserve the demonstrator's natural dexterity while producing contact-grounded observations and actions that transfer to robot hands. We present Contact Imitation Interface (CIMI), a framework with contact-grounded demonstration and learning interfaces. The demonstration interface combines shared contact geometry and fingertip RGB views with contact-alignment-first retargeting and reprojection of wider scene views. The learning interface introduces a hierarchical policy in which a contact-surface planner predicts relative contact-surface trajectories and a controller coordinates wrist and finger commands to improve contact alignment. CIMI combines contact-grounded observations, retargeting, and action representations, improving mean final-stage success by at least 50 percentage points over baseline policies across six hand-task pairs on LEAP and Wuji. Hardware designs and software are publicly available.

0.21

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.71
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41

DexFormer 2.0: Towards a Cross-Embodiment Foundation Policy for Dexterous Grasping

cs.RO ·2026-11-15 ·Lixin Xu, Ke Zhang, Xinyu Liu, Jie Tan, Senming Tan +5 more
similarity 0.70
Abstract

Dexterous grasping policies are usually trained for one arm paired with one hand. Every new pairing then needs its own policy, and the number of policies grows with every arm and hand added. We ask whether a single policy can control many arm-hand combinations and transfer to pairings and hands it has never seen. This is hard because robots differ in the number, layout, and dynamics of their joints, so their observations and actions share no common interface. We present DexFormer 2.0, a single reinforcement learning policy for cross-embodiment dexterous grasping. It maps every robot to a canonical joint interface with validity masks, encodes each joint's morphology with attention biased by the kinematic tree, and uses a Transformer-XL memory to infer embodiment-dependent dynamics from recent interaction. Trained on 18 combinations of four arms and six hands, it reaches 89% stable success on seen combinations and 51% on six held-out arm-hand pairs, outperforming GRU and DexFormer 1.0 baselines. Without fine-tuning, it also grasps with four new hand types and, through retargeting, with parallel grippers. Ablations show that memory, the kinematic-tree bias, and broader pairing coverage each matter for transfer. On a physical Flexiv arm, distilled students transfer zero-shot from simulation with two hands, including a held-out pair. Project website: https://davidlxu.github.io/dexformer2-web/.

0.13