CS Paper Radar

Iteratively Convex Frequency Data-Driven Synthesis of Structured MIMO Controllers

Luuk Marceau Spin, Thom Samuels, Dragan Kostic, Maurice W. P. M. H. Heemels, Nathan van de Wouw, Roland Toth

eess.SY ·submitted 2026-10-14 08:11 UTC · v1
unusual

Abstract

Frequency-response-function-based controller design enables synthesis directly from measured data, avoiding the need for accurate parametric plant models. This paper presents a generalized IQC-based approach for convex synthesis of structured MIMO feedback and feedforward controllers from frequency response function data. The framework supports flexible controller parametrizations, multiple performance objectives, and both singular-value and element-wise performance shaping of MIMO controllers within a unified frequency-domain formulation. To facilitate practical deployment, the synthesis approach is embedded within a bootstrapped controller design methodology that progressively increases controller flexibility while refining the performance specifications. The resulting approach is validated experimentally on the motion stage of an industrial wirebonder, where clear performance improvement is demonstrated through MIMO $\mathcal{H}_\infty$ synthesis, element-wise feedback shaping, and dynamic feedforward design. The results demonstrate that high-performance multivariable controllers can be synthesized directly from measured FRF data in a practical and systematic manner.

Comment
16 pages, 11 figures, TCST paper

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Data-Driven Controller Synthesis from Sampled and Uncertain Frequency Response Estimates using Integral Quadratic Constraints

eess.SY ·2026-10-14 ·Luuk Marceau Spin, Maurice W. P. M. H. Heemels, Nathan van de Wouw, Roland Toth
similarity 0.78
Abstract · 15 pages, 6 figures, none other publications

In this paper, we develop a novel MIMO controller synthesis method that relies solely on frequency-domain data of discrete-time systems. The approach is based on an iterative design procedure using \emph{integral quadratic constraints} (IQCs). It generalizes existing data-driven methods that approximate semi-infinite IQC conditions by enforcing them on a finite set of measured frequency points. Such approximations do not provide guarantees on the continuous frequency axis and may fail to capture inter-frequency behavior. We address this limitation by formulating a convex optimization problem that preserves robustness guarantees over the entire frequency range. In particular, the proposed method explicitly accounts for inter-frequency behavior of both plant and controller, leading to certified robust stability and performance. The effectiveness and computational efficiency of the approach are demonstrated using experimentally obtained frequency response data from industrial-grade semiconductor equipment. The synthesized controller is implemented on the physical setup, and its performance is validated in real-time experiments.

0.35

Robust Control Design for LTI Systems with Sampling-Time Jitter

eess.SY ·2026-11-12 ·Dieter Schwarzmann, Jan Lunze
similarity 0.54
Abstract · Submitted to ECC2027

Sampling-time jitter makes a sampled-data control loop time-varying, so standard LTI robust-control synthesis does not apply directly. This paper reformulates dynamic output feedback design under bounded, unmeasured sample-to-sample jitter as a robust-control problem. The exact zero-order-hold model is decomposed into a nominal time-invariant plant and a memoryless, time-varying uncertainty block with a norm bound representing the sampling-time jitter. As the block is memoryless, the operator small-gain condition for the time varying loop reduces to a standard robustness test with a matrix norm bound. It is shown that the same test also guarantees uniform exponential stability for every admissible jitter sequence. Embedding the decomposition into a generalized plant with performance channels serves two synthesis objectives with standard robust-control tools: Robust stability with optimized nominal performance through structured H-inf synthesis, and robust performance through mu synthesis with constant scalings. A numerical example shows that jitter can destabilize a control loop with a nominal H-inf controller, whereas both robust designs remain stable and the robust-performance design is less sensitive to jitter at the cost of nominal performance.

0.36

Co-designing a Layered Control Architecture

eess.SY math.OC ·2026-10-14 ·Chris Verhoek, Charis Stamouli, George J. Pappas, Nikolai Matni
similarity 0.52
Abstract · 19 pages, extended version

Layered control architectures (LCAs) are ubiquitous in complex engineering systems. However, in practice they are largely designed ad hoc and mostly dictated by the experience of the designer. This is because there is currently no systematic and practically applicable theory available to holistically design LCAs. Hence, systematically reasoning about the optimality, stability, and feasibility of the LCA design is not possible. We set a first step toward such a theory by presenting a framework for co-designing a two-layer LCA for a linear time-invariant plant. The resulting co-design problem optimizes over architectural design variables (e.g., reduced order model dimension and sampling ratio between the layers) and tuning-based design variables (e.g., the numerical values of the feedback gain or the matrices of the reduced order model), all subject to constraints that ensure stability, feasibility, and compute properties of the closed-loop LCA. The proposed formulation allows to make informed tradeoffs along the Pareto front traced over different axes of optimality, e.g., speed, accuracy or computational effort. We demonstrate the effect of making various tradeoffs in a simple numerical example.

0.45

Sample-Covariance Regularization for Data-Driven Predictive Control from Frequency Response Functions under Colored Noise

eess.SY ·2026-11-06 ·M. Wind, T. J. Meijer, V. S. Dolk, W. P. M. H. Heemels
similarity 0.50
Abstract

In this work, we investigate how sample covariance obtained from frequency-response functions (FRFs) can be exploited to improve performance of data-driven frequency-domain predictive control (FreePC) in the presence of colored measurement noise. In case of periodic multisine excitation, this covariance is obtained directly from repeated periods and provides a frequency-dependent measure of uncertainty without requiring an additional parametric noise model. To incorporate this information into both indirect and direct predictive control, we develop a frequency-domain subspace predictive controller (FD-SPC) and establish its equivalence to the direct FreePC formulation in the noiseless setting. Regularization terms for both formulations are then motivated by expected prediction-error criteria and constructed from the sample covariance of the FRF estimates. Across all tested noise models and data sizes, regularization consistently reduces the median realized control cost relative to the corresponding controller without covariance regularization, with reductions of up to 35%.

0.24

Extremal-Phase-Guided Sequential Convex Optimization: Model Order Reduction

eess.SY ·2026-11-04 ·Mustafa Oğuz Yeğin, Hitay Özbay, Tomáš Vyhlídal
benchmark similarity 0.49
Abstract · 20 pages, 6 figures, 6 tables, submitted to International Journal of Control

Fixed-order frequency-weighted H-infinity approximation is a nonconvex problem, and local optimization methods can be sensitive to initialization. We present extremal-phase-guided sequential convex optimization (EPGSCO) for stable fixed-order rational approximation. We introduce a novel phase-guidance technique motivated by the all-pass structure underlying optimal Hankel-norm approximation, with a phase template fitted to the error-magnitude derivative at dominant peaks. We integrate this guidance with dominant-peak selection, focused frequency grids, and adaptive pole-residue and polynomial-coefficient updates to address stagnation and improve approximation accuracy. CD-player examples and benchmarks with known optimal errors evaluate the algorithm against established methods. Comparisons with classical sequential convex optimization (SCO) under shared settings for the common components assess the combined contribution of phase guidance and adaptive frequency refinement. Results demonstrate improved accuracy in most of the tested cases and attainment of the known optimum from four tested initializations for a constructed order-42 benchmark, with additional computation in some cases.

0.31

Wave Processing Unit: Closed-Form Matrix Synthesis for Wave Computing in Multiuser MIMO Communications

eess.SP cs.IT ·2026-10-21 ·Xiaokun Teng, Yanqing Ren, Weicong Chen, Wankai Tang, Xiao Li +1 more
similarity 0.49
Abstract · Submitted to IEEE journals for possible publication

Wave computing offers a compelling route to bypass the latency and energy bottlenecks of digital baseband processing. However, existing wave-domain processors rely on task-specific, non-convex iterative optimization, which incurs substantial configuration overhead and limits real-time applications. In this paper, we propose the wave processing unit (WPU), a programmable planar Mach--Zehnder interferometer (MZI) network that accelerates matrix--vector multiplications in MIMO communications. First, we model the tunable MZI element as a parameterized $2\times2$ unitary transformation, and establish a closed-form synthesis framework for the WPU that decomposes an arbitrary unitary matrix into a cascade of MZI elements arranged in a compact rectangular topology. To handle arbitrary complex-valued operators, we further extend the method through singular value decomposition (SVD) and a hardware-efficient semi-unitary synthesis, avoiding redundant hardware and reducing the compilation complexity. We then apply the WPU to multiuser downlink precoding by an efficient WPU synthesis method, and compare the proposed architecture with hybrid and wave-domain ones. Numerical results demonstrate machine-precision synthesis with negligible residuals for up to $64\times64$ operators, with approximately $380\times$ faster configuration than iterative wave computing baselines. For 64-antenna, 8-user downlink precoding, WPU requires 87.5% fewer RF chains than the fully digital architecture while achieving the same sum rate under ideal hardware. These results highlight the potential of the WPU for precise, hardware-efficient wave-domain processing with rapid configuration.

0.23

Communication Architecture Co-Design for Distributed Control via System Level Synthesis

eess.SY ·2026-09-14 ·Jeonghyeon Noh, SooJean Han
published similarity 0.49
Abstract · to appear at 2026 IEEE Conference on Decision and Control (CDC)

As networked dynamical systems grow in scale, distributed controller architecture design has become a critical issue. To address this, prior studies have incorporated the regularization for design (RFD) framework into system-level synthesis (SLS), focusing primarily on actuator and sensor placement. However, communication architectures also fundamentally impact the performance of distributed control, and scalable explicit co-design of the underlying communication topology within SLS remains challenging. This paper proposes a scalable convex framework for the co-design of communication architectures and distributed controllers within the SLS paradigm. We explicitly characterize a communication topology-induced feasible subspace of system responses, parameterized by the communication adjacency matrix and separate from the physical plant topology. By deriving a communication link norm from this characterized subspace, we formulate a convex SLS problem for communication architecture co-design. A proximal ADMM scheme is employed to appropriately decompose the optimization problem in a manner that preserves scalability to large networks. Numerical experiments validate the efficacy of the proposed framework in optimizing the trade-off between closed-loop performance and communication architecture complexity, while also confirming its scalability.

0.30

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

cs.RO ·2026-09-19 ·Xuanyu Huang, Jianqiang Dong, Hang Zhao
hot direction similarity 0.48
Abstract

Different tasks performed by legged robots impose distinct torque and speed requirements on actuators. Existing robotic actuators are generally optimized at the component level for metrics such as torque or power density, without explicit task guidance. System-level optimization across components such as motors, gearboxes, and sensors is challenging because of the high computational cost and coupling among mechanical, electrical, and electromagnetic behaviors. Consequently, improvements in individual components may not translate into better robot performance in a specific task. To this end, we present a systematic optimization framework for task-oriented co-design of actuator hardware and control. First, surrogate models are employed to accelerate motor evaluation and support global exploration of the coupled design space. Then, a hierarchical mixed-variable optimization strategy is adopted, combining discrete enumeration with continuous search over dimensions and real-valued indices. These indices are rounded to select admissible values for the remaining discrete choices before each evaluation. Within this search, rated output torque density and task performance are jointly optimized, with Bezier-parameterized joint torque profiles determined for each hardware candidate. Finally, the effectiveness of the proposed framework is validated through actuator fabrication and experiments on a two-degree-of-freedom jumping leg. Based on its measured mass, the fabricated prototype achieves a nominal rated output torque density of 35.7 N m/kg, approximately 60% higher than that of a widely used commercial geared joint actuator, while being 18.6% lighter. Under matched bench conditions, it achieves 12.0% greater jump height at twice-rated torque. Together, these results demonstrate a systematic route from task requirements to actuator design and control.

0.36